Swami Keshwanand Rajasthan Agricultural University Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
Refer DocumentsDocument Cost
₹ 1,000Tender Fee
₹ 1,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_SKRAU_246844_1Bid Award Id
ViewTender No
NIT 4 of 2021-22Tender Authority
Swami Keshwanand Rajasthan Agricultural University ViewPurchaser Address
-Website
http://http://raubikaner.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Additional Performance Security
BOQ Items
... More
Carriage of earth etc. including loading, unloading & stacking for lead 3 km.
232
-
114.81
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20%
50
-
186
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
.
137
-
2571
... More
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement M20 grade Nominal Mix / Design Mix.
19
-
3762
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix / Design Mix
142
-
4492
... More
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
71
-
131
... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.
996
-
269
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Hot rolled deformed bars (IS : 1139).
14187
-
64
... More
Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand).
210
-
2389
... More
Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 10.0in foundation and plinth with Cement mortar 1 : 6 (1 cement : 6 coarse sand)
93
-
3020
... More
Brick work with non modular flyash brick comfirming to IS 12894: 2002 of class designation 10.0 in superstructure above plinth level upto floor five level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)
381
-
3266
... More
Half brick masonry with non modular flyash brick comfirming to IS 12894: 2002 of class designation 10.0 in Superstructure , above plinth level upto floor five level Cement mortar 1 : 4 (1 cement : 4 coarse sand).
258
-
439
... More
Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :Kota stone 25 to 30mm thick.
102
-
431
... More
Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red / Choclate Colour) Above 3601 Cm2 Slabs
18
-
1965
... More
Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work.
4
-
229
... More
Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).
91
-
537
... More
Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).
15
-
597
... More
P & F 1st quality stain free double charge Vitrified tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete size 600 mm X 600 mm.
38
-
725
... More
Providing and fixing external grade board solid core single/ Double leaf flush door shutters IS: 2202(Part-II)1996 marked using Phenol formal dehyderesin in glue both sides with approved stainless steel fittings complete as per annexure 'A' : 30 mm thick Commercial Veneer both side
78
-
1719
... More
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 25 mm
133
-
121
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete:
808
-
65
... More
Providing and fixing fully panelled/partly panelled/ double leaf shutter frame for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - 'A' and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete : 30 mm thick Shesham wood grade I
8
-
1442
... More
Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thick Wire gauge 24 gauge 14 mesh of IS designation 85 gauge of dia 0.56 mm
6
-
538
... More
Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide.
280
-
63
... More
Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). With 75 mm opening when closed.
7
-
7151
... More
Providing and fixing M.S. sheet 1mm thick Double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint
3
-
2566.8
... More
Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Windows side hung /Ventilators top or centre hung (openable)
90
-
1983
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.46 mm dia wire and 1.63 mm aperture on both sides
83
-
315
... More
Providing and fixing Square bars or other flat welded to window, ventilatiors etc.
552
-
55
... More
Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge
80
-
2038
... More
Painting top of roofs with bitumen of approved quality at 17kg per 10 sum impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete: With residual type petroleum bitumen of penetration 80/100
499
-
83
... More
Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
50
-
4055
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
90
-
90
... More
Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge.
499
-
282
... More
Precast terrazo tiles of approved make, 22mm thick with marble chips of size upto 12mm laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete on 20mm thick bed of cement sand mortar 1 : 4 Dark shade using ordinary cement.
260
-
476
... More
Precast terrazzo tiles of approved make 22mm thick with marble chips of size upto 6mm in skirting & risers, treads of steps and dados 12mm thick cement plaster 1:3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Dark shade using ordinary cement.
37
-
644
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Ordinary cement without any pigment.
90
-
431
... More
Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm
300
-
851
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab upto 2001 Sqcm.
25
-
626
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by hydrulic pressed, laid in required Grey/Yellow/Red or any other colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge: 60 mm thick c.c. paver block of M-30 grade with approved color design and pattern.
120
-
510
... More
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20 mm thick.
2664
-
140
... More
6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)
774
-
85
... More
Washed stone grit plaster on exterior walls of height upto 10 M. above level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2kg of cement per sqm, top layer 15 mm cement plaster 1:1/2:2 ( 1 cement : 1/2 coarse sand : 2 marble stone chipping size 10 mm nominal size) in panel with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chipping, complete as per specification and direction of Engineer in charge. (Payment for providing grooves shall be made separately)
784
-
391
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: New work(Two or more coats) including prepartion of base with primer, putty, lippy etc complete in all respect.
2845
-
53
... More
Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ).
917
-
63
... More
Applying priming coat : With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood.
164
-
25
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on New Work
398
-
56
... More
Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)
116
-
264
... More
Do---------------- For shutters builtup standard tubular sections of openable doors , windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)
33
-
302
... More
Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm)
6
-
773
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate
2
-
2165
... More
Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)
3
-
800
... More
40mm thick marble chips flooring rubbed and polished to granolithic finish under layer 28mm thick cement concrete 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 12.5mm nominal size) including fixing of dividing strip (excluding the cost of strips) and top layer 12mm thick with marble chips of approved colour 7mm to 10mm nominal size laid in cement marble chips mix by weight in proportion of 2 : 3 (2 cement : 3 marble chips) by volume including cement slurry etc. complete :Ordinary cement without any pigment.
15
-
410
... More
Marble chips skirting/dado rubbed and polished to granolithic finish 6mm thick with white marble chips of approved colour and size from smallest to 4mm nominal size laid in cement marble chips mix in proportion of 4:7(4 cement : 7 marble chips) by volume including fixing of dividing strips (excluding the cost of strips) complete in all respects :18mm thick with under layer of 12mm thick cement plaster 1:3 (1 cement : 3 coarse sand) : Ordinary cement without any pigment.
30
-
481
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm thick nominal size aggregate.
100
-
227
... More
P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.
6
-
1461
... More
P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor.
7
-
1661
... More
P & F water closet Seat Covers with brass hinges complete : Solid PVC (ISI marked) grade-I White for EWC.
7
-
449
... More
P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVC bend as per IS : 7231
7
-
912
... More
P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 32 mm waste pipe complete including cutting & making good the wall : Size 550 mm x 400 mm
13
-
2043
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink & IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board Stainlees steel kitchen sink without drain board 610 x 460 mm bowl depth 200 mm.
13
-
2900
... More
Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Size 600 x 450mm x 4 mm thick
12
-
471
... More
Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete Other Sizes
1
-
1744
... More
P & F Towel Rail or Ring of approved quality/make: C.P. brass towel rail with brackets 600 x 20mm.
12
-
228
... More
P & F Grating of approved quality/make: Stainless Steel Grating 100 mm Nominal dia
40
-
42
... More
P & F Twin- peg of approved quality / make C.P. brass (heavy)Superior quality
40
-
60
... More
P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.
6
-
391
... More
P & F G.I. Pipes with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors :-( Internal work ) Medium Duty Pipes Exposed on walls 15 mm dia nominal bore
70
-
155
... More
P & F G.I. Pipes with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors :-( Internal work ) Medium Duty Pipes Exposed on walls 25 mm dia nominal bore
190
-
245
... More
P & F G.I. Pipes with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors :-( Internal work ) Medium Duty Pipes Concealed pipe in wall including painting with anticorrosive bitumen paint 15 mm dia nominal bore
30
-
183
... More
P & F G.I. Pipes with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors :-( Internal work ) Medium Duty Pipes Concealed pipe in wall including painting with anticorrosive bitumen paint 25 mm dia nominal bore
60
-
277
... More
P & F G.I. Pipes with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. :-( External Work ) Medium Duty Pipes 15mm dia nominal bore
60
-
137
... More
Making connection of G.I. distribution branch with G.I. main including all fitting. Beyond 25mm & upto 100mm dia
2
-
481
... More
P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C.P. Brass bib cock,15mm nominal bore.
60
-
433
... More
P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt.400 gm,15mm.
3
-
182
... More
P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked)
28
-
439
... More
P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 45 0mm
20
-
60
... More
P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : Brass / Gun metal Half-turn wt. 1 Kg. of approved quality / make, 25mm nominal bore.
6
-
821
... More
P & F G.I. Pipes with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. :- ( External Work ) Medium Duty Pipes 50 mm dia nominal bore
45
-
319
... More
P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 25 mm nominal bore.
12
-
521
... More
Do----------- :Gun-metal 50 mm nominal bore.
1
-
718
... More
P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including placing on terrace( at all floors),making connection etc.
5000
-
7.26
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes Type A. 75 mm diameter
60
-
124
... More
Do--------- 110 mm diameter.
240
-
197
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes Type B. 110 mm diameter
10
-
293
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Single Tee without Door 75 mm dia.
20
-
173
... More
Do--------- Single Tee without Door 110 mm dia.
20
-
238
... More
Do--------- Single Bend w/o Door 87.5° 75 mm dia.
18
-
105
... More
Do--------- Single Bend w/o Door 87.5° 110 mm dia.
36
-
160
... More
Do--------- Single Plain Shoe 110 mm dia
16
-
149
... More
Do--------- Nahni Trap 100 x 75 mm
36
-
132
... More
Do--------- Vent Cowel 110 mm dia.
6
-
55
... More
Do--------- Pipe clip 110 mm dia.
40
-
42
... More
Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.) concrete width to be reduced from width W at center of pipe to `0` at top of pipe. (Excluding cost of pipe) 100mm dia S.W. pipe
10
-
166
... More
Construction of manhole in all type of soil inner size 90 X 60 Cm. 230/300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead Depth up to 0.5 M
2
-
3994
... More
Construction of chamber in all type of soil with 230/300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 600 x 450mm depth upto 0.5 M Cement cover with frame
6
-
3056
... More
Construction of Soakage well in all types of soil of approved drawing, top 1.5 Mtr. depth in 345 mm thick brick masonary with CM 1:6, 80mm thick stone slab covering resting on stone lintel of cross section 150 x 300mm (two numbers resting on stone bed plate), jointing of slab in CM 1 : 3, Ralthal, Kharanja 40 mm thick M-15 grade C.C. flooring, out side plaster in CM 1 : 6 upto 450 mm depth, earth work etc complete including disposal of surplus earth within a lead of 50 Mtr. including providing and fixing of PVC Vent pipe 75mm dia upto 1.50 Mtr. height as per direction of Engineer in Charge including making connection etc. 3 Mtr. outer dia in top 1.50 M depth and 90 Cm dia at bottom. Depth of soakage well 10 to 12 Mtr. from ground level. [As per Bikaner Practice].
2
-
21880
... More
Construction of septic Tank in all types of soil with 230/300 mm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400 x140x150 cm.(for 50 users)
1
-
30307
... More
Construction of Open Surface Drain with 112mm thick brick masonry in CM 1:4,110mm thick base concrete 1:5:10, 37mm thick M-15 grade C.C. flooring ,12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing: 250mm drain,300mm Av. depth
30
-
495
... More
Providing & fixing C.P.flange for 15mm dia taps.
60
-
37
... More
Wiring of light point/ fan point/ exhaust fan point/ call bell point as per PWD specification for electrial works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS: 694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit & it's accessories (J.B., Bend etc.), round tiles,18 SWG G.I. box with earth terminal, 6 A switch, 3 pin ceiling rose/ Lamp holder/ 3 point connector, 3.0 mm thick ISI marked phenolic laminated sheet (IS: 2036 - 1995) Al. alloy/ cadmium plated iron screws 20 mm cup washers etc. ass as per pre approved by Engineer Incharge, making connections, testing etc. complete as required for specification of copper conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05, & E - 07. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR. , Short point (up to 3 mtr.)
50
-
185
... More
Do--------- Medium point (up to 6 mtr.)
70
-
311
... More
Do--------- Long point (up to 10 mtr..)
70
-
419
... More
Wiring of 3/5 pin 6 amp. light plug point as per PWD specification for electrial works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS: 694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit & it's accessories (J.B., Bend etc.), round tiles,18 SWG G.I. box with earth terminal of required size, 6 A switch, 3/5 pin 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet (IS: 2036 - 1995) Al. alloy/ cadmium plated iron screws 20 mm cup washers etc. ass as per pre approved by Engineer Incharge, making connections, testing etc. complete as required for specification of copper conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05, & E - 07. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR., On Board.
68
-
87
... More
S&F following sizes (dia.) of ISI marked MMS (IS : 9537 p-III) vergin material PVC conduit as per PWD specification for electrical works along with accessories (IS : 3419) as required in recess including cutting the wall, covering conduit and making good the same as required. All relative and latest acceptance tests reports by any NABL. accredited lab for the conduit shall be submitted before execution & All as per pre approved by Engineer in charge, for additional technical parameters of products/ work, refer Annexure "A" attached with this BSR MMS (IS : 9537 P-III) PVC conduit 20 mm
100
-
30
... More
S&F following sizes (dia.) of ISI marked MMS (IS : 9537 p-III) vergin material PVC conduit as per PWD specification for electrical works along with accessories (IS : 3419) as required in recess including cutting the wall, covering conduit and making good the same as required. All relative and latest acceptance tests reports by any NABL. accredited lab for the conduit shall be submitted before execution & All as per pre approved by Engineer in charge, for additional technical parameters of products/ work, refer Annexure "A" attached with this BSR MMS (IS : 9537 P-III) PVC conduit 25 mm
500
-
36
... More
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical works with ISI marked (IS:694) and as per IS : 8130 : 2013 of 1.1 kV grade. Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss, oxygen free (10 ppm) for less chances of oxidization and higher silver content for gives better conductivity, insulation PVC type A, flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4, in existing surface or recessed PVC/ MS conduit/ casing capping including all as per pre approved by Engineer Incharge, making connections, etc. as required OEM Must have its own in house NABL lab setup for all testing facilities for wires, For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR 2 x 1.5 Sq.mm.
200
-
24
... More
Do--------- 2 x 2.5 sq. mm. + 1x1.5sqmm
850
-
50
... More
Do--------- 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm.
430
-
71
... More
Do--------- 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm.
60
-
100
... More
P & F of 18 SWG G.I./ M.S. Sheet boxes as per PWD specification for electrical works, duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) in recessed / surface as required. All as per pre approved by Engineer in charge. For addtional technical parameters of products/ workm, refer Annexure 'A' attached with this BSR 18 SWG M.S. sheet boxes 175 mm x 100 mm x 60 mm
20
-
56
... More
Do--------- 250mm x 300mm x 75mm
10
-
145
... More
Do--------- 300mm x 100mm x 60mm
10
-
84
... More
P & F of paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/ frames including making holes for switches etc, with brass/ zinc plated screws, washers nut and bolts as required. All as per pre approved by Engineer in charge, For additional technical parameters of products/ work refer Annexure 'A' attched with this BSR 3.0 mm thick.
2
-
763
... More
Do--------- 6.4 mm thick
1
-
1020
... More
P&F of 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, as per PWD specification for electrical works with ISI marked IS 8828 (1996)/ conforming to IEC 60898-1 2002, IEC 60947 -2, low watt losses, trip free mechanisum, energy limiting of class 3 as per IEC, minimum phase termination capacity of 35 sq.mm. conductorline load reversibility, label holding facility, IP-20 contact protection and fitted with existing distribution board/ sheets, min. peration 20,000 upto 32 A rating and 10,000 upto 63 A,, 5000 for 80 A rating including making connections, testing etc. as required. OEM shall have submit NABL/ CPRI/ ERDA accreduated lab test reports before execution & all as per approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A attached with this BSR. Single pole MCB 6 A to 32 A rating
48
-
142
... More
P&F of 240 /415 V isolator as per PWD specification for electrical works with ISI marked IS 13947-III/ conforming to IEC 60947-3, suitable for AC22A utilization catagory, 4kV impulse withstand voltage, true contact indication, Red colour dolly/ lever shall have single mould coveriong over all poles for operation, two position din rail mounting, minimum phase termination capacity of 35 sq.mm. label holding facility, IP 20 contact protection and fitted with existing distribution board/ sheet including making connections, testing etc. as required OEM shall have submit NABL/ CPRI/ ERDA accreduated lab test reports before execution & all as per approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A attached with this BSR..Four pole Isolator 63 A rating
6
-
590
... More
P&F of IK09 recessed/ surface mounting heavy duty horizontal type sheet steel of 1.6 mm thick Distribution board as per PWD specification for electrical works ISI marked conforming to IS - 13032 & IS-8623/ conforming to IEC 61439-3, Phosphatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link, neutral link, earth link, connecting wire of suitable rating and din bard, masking sheet, including making internal DB terminations with copper lugs and with detachable gland plate, including making connections, testing etc. as required OEM shall have submit NABL / CPRI/ ERDA accrediated lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR IP-43 Double door (Three phase) 6 way (18 O/G + 81/C)
2
-
1917
... More
P&F of recessed / surface mounting type sheet steel/ Plastic enclosure as per PWD specification for electrical works conforming to IEC/ Isolator with Din rail including, all as per pre approved by Engineer in charge, making connections, with lugs, repairs etc. as required OEM shall have submit NABL/ CPRI/ ERDA accrediated lab test reports before execution & all as per pre approved by Engineer in charge, for additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR with sheet steel enclosure four way.
2
-
285
... More
P & F of ISI marked (IS : 371) 6 amp. surface type 3 pin ceiling rose as per PWD specification for electriical works, made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screws including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR
50
-
18
... More
P & F of ISI marked (IS : 1258) 6 amp. Batten/ angle lamp holder as per PWD specification for electric works, made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screws including making connection testing etc. as required. All as per pre approved by Engineer in charge, for additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR.
70
-
19
... More
P & F of non modular socket size flush type 120 watt rotary minimum 5 step fan regulator as per PWD specification for electric works, ISI marked (IS : 11037) made out from industrial grade Polycarbonate or fire resistant ABS material, including making connection testing etc. as required. All as per pre approved by Engineer in charge, for additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR.
40
-
135
... More
SITC of IP 40 3 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/ 415 V, 50 Hz; O/L & S/C settings as per PWD specification for electrical works, conforming to IS/ IEC 60947 P -2 : 2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less than 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp = 8 KV, rated insulation voltage 800 V, provision for UVR, shunt trip, earth fault trip, door interlock, pad lock & rotary handle, including making connections with lugs & spreaders, etc. as required OEM shall have submit NABL/ CPRI/ ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge, For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR with Thermal Magnetic release 200 Amp. 35 kA adjustable O/L & fixed S/C setting, Ics = 100% Icu
1
-
9271
... More
Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-armoured / Armoured aluminium cable of 1.1 KV grade as per PWD specification for electrical works in existing RCC / Hume/ Stoneware/ PVC pipe/ open duct/ cable trench with filling of excavated earth in trench, on existing cable trays or on surface etc. including making necessary connection, testing etc. as required of size and as per points (a), (b), (c) , mentioned below :- (a) Material :- H4- Grade aluminium conductor of purity 99.6% & as per IS: 1554 P-I/ IS : 7098 P-1. (b) conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999 for armouring of cables in armoured cable items, IS 5831 for sheath, IS 10810 (Part 0 to 64) for testing procedure. (c) OEM Must have ISO 9001 & 14001 certifications for quality assurance & its own in house NABL lab setup for all testing facilities for cables, Appropriate type test certificate/ OEM test report shall be submitted. All above as per pre approved by Engineer in charge, For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR 35.0 Sq.mm 3.5 core armoured cable.
100
-
179
... More
Providing & Fixing of ISO certified company made bus bar chamber housed in sheet metal box as per PWD specification for electrical works confirming to IEC- 60439/IS-8623 & IEC-60529/ IS-2147 made out from 1.6 mm thick powder coated CRCA sheet, degree of protection IP-31, front openable bus bar made out of aluminium or wrought aluminium alloy suitable for 100 amp. Capacity, bus bar fixed on porcelain/ DMC insulators as approved spacing including making connections etc. as required Appropriate type test certificate / OEM test report shall be submitted. All as per pre approved by Engineer in charge, For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR 450 mm long , 4 strip
1
-
1486
... More
P&F of Double ball bearing, copper wounded capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible 3 copper conductor ,making connections, testing etc. as required. OEM shall be an ISO certified company. Appropriate OEM test certificate shall be submitted by contractor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR 300 mm sweep
3
-
1176
... More
P & F of IK07 IP 66 protected LED Street Light Luminaire on existing bracket/ pole. Fixture made of powder coated single piece pressure die cast aluminium LM6/ ADC12 material with heat dissipation fins on housing with UV stabilized PC/ Toughened Glass cover (UV stablization report submitted for UV cover) and secondary lens on each LED & should be SMD type. The system level Luminaire efficacy =120 Im/ wt. with High Power LEDs is to be used and potted driver must be potted & has a unique BIS R number with input voltage AC 120 to 270 V AC with High voltage Cutoff @=300 V AC and Auto resetting Safety, Input frequency 50 Hz+3% Power factor 0.95 driver Efficiency 85%, THD(I) 10% Humidity 10% to 90% RH working Temp. -5C to 45 C. driver current 1000mA shown in LM79 report. The luminaire shall be BIS certified and T.C. certified. Life Expectancy Equal or more than 50000 burnings hrs with Minimum 70% lumen maintened, color Rendering index 70 and CCT 5700 K + 355K. Surge protection shall be min 4 KV internal and min 10 KA external. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark / Name Engrave/ Embossing on die cast housing to allow traceability/ authenticity. Fixture shall be as per IS 10322 complianced. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/ LM80) Certificate/ report with liable warranty of product/ accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR LED Street Light fixture 70 watt.
6
-
5104
... More
P & F of IP 40 LED Recessed/ Surface Mounted, Round/ Square Non -Dimmable Back lit SMD Mid Power LED Downlight with die-cast aluminium housing & Head Sink for heat dissipation with UV Stablized non yellowish Diffuser with internal/ external BIS complience 2.5 KV surge protected isolated driverm, with short & open circuit protection, having efficiency 85% and in compliance to IEC standards, System Lumen efficacy of 120 Im/ watt, THD 10%, p.f. 0.95, CRI 80, life time of minimum 50000 Burning Hours with, 70% of intial Lumen maintained till life ends, CCT 3000ºK/ 4000ºK/ 5700ºK/ 6000ºK/ 6500ºK (As per ANSI Bin), maximum power consumption should not more than the specified rating and fixture shall be of BIS standard and trade mark certificate (T.C.) Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/ LM80) Certificate/ report with liable warranty of product/ accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR LED Surface Mounting LED down light 18/20 W.
22
-
763
... More
P & F of IP4- LED Surface/ Recessed/ suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity/ transmisivity UV stabilized Non- yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/ external surge protection BIS certified isolated driver having efficiency 85%, with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture), System lumen efficacy of 120 Im/ Watt, THD 10%, p.f. 0.95% CRI 80, life time of minimum 50000 Burning Hourse with, 70% of intial Lumen maintained till life ends, CCT 3000ºK/ 4000ºK/ 5700ºK/ 6000ºK/ 6500ºK (As per ANSI Bin), maximum power consumption should not more than the specified rating and fixture shall be of BIS standard and trade mark certificate (T.C.) Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/ LM80) Certificate/ report with liable warranty of product/ accessories fromOEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR Suspended Mounting/ Surface Mounting 48W LED light fixture 2'x2' with acrylic/ prismatic front cover.
1
-
3340
... More
P & F of IP20 SMD Mid Power LED batten type integrated light fixture made from polycarbonate/ extruded aluminium powder coated housing with in built driver, Power consumption of 18W/20 W, system lumen efficacy 120 im/ Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection THD 10%, p.f. 0.95, CRI 80, life time of minimum 50000 Burning Hours with, 70% of intial Lumen maintained till life ends, CCT 3000ºK/ 4000ºK/ 5700ºK/ 6000ºK/ 6500ºK (As per ANSI Bin), maximum power consumption should not more than the specified rating and fixture shall be of BIS standard and trade mark certificate (T.C.) Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/ LM80) Certificate/ report with liable warranty of product/ accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR 4' LED Tube shape fixture 18/20 W (Polycarbonate Base).
40
-
228
... More
P & F of energy efficient/ energy saving IP 20 LED direct retrofit Bulb in existing holder or fixture as required with system lumen efficacy 100 lm/ Watt out put, pf 0.95, CRl 70, minimum life time of minimum 25000 Burning Hours with, 70% of intial Lumen maintaned till life ends, CCT 3000ºK/ 4000ºK/ 5700ºK/ 6000ºK/ 6500ºK (As per ANSI Bin), maximum power consumption should not more than the specified rating and fixture shall be of BIS standard and trade mark certificate (T.C.) Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/ LM80) Certificate/ report with liable warranty of product/ accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR 15 Watt.
50
-
117
... More
P & F of ISO Certified company made ISI marked (IS : 2082) of 5 Star rated vertical storage water heater with outer casing made of M.S. sheet finished with anti-corrosive powder coatin, inner tank made of pure electrolytic copper/ stainless steel/ SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out, Dual indicating lamps for power supply and thermostat, PUF insulation, Pressure release vlave, fusible plug etc. as required held in position with 4 no. rag bolts, duly wired with 3 core 2.5/ 4.0 sqmm PVC insulated & sheathed copper conductor and 16 A/ 25 A three pin plug top with Portable Residual Current Device (PRCD) facility form OEM, including making inlet, outlet heavy guage C.P./ flexible alloy connection, testing etc. complete in all respect. Appropriate OEM test certificate shall be submitted by contractor. All as per pre approved by Engineer in charge. For additional technicial parameters of products/ work, refer Annexure 'A' attached with this BSR 25 ltr.
2
-
8879
... More
SITC of chemical Gel eathing sytem of Dual Pipe Technology made of with 'B' class G.I. Pipe as per IS 1239 (part-1) :2004 of Medium duty of following sizes as per points mentioned (a), (b), (c), (d), (e) below: (a) filled with anti corrosive conductive compounds with the permanent sealing at both the ends, CPRI/ ERDA tested with RMS capacity of minimum 35-40 KA for withstanding 1 second. (b) To ensure the moisture content and electrical conductivity, 25 kg. for 2000 mm & 50 kgs for 3000 mm of resistance lowering earth enhancement material shall be used as a backfill compound. The compound shall be tested form NABL acredeated lab for low resistivity (less than 0.12 Ohm - meter) & high condictivity in nature with carbon as a major content as per referance of IS 3043-1987, IEEE 80-2013 (clase 14.5d), IEEE 837 & IER 1956 with latest amendements. (c) Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 kg. or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm, and Height 250 to 300 mm. (d) Testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurement book. (e) Self certificate for confirming above standards from OEM is mandatory. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR. with Pipe in Pipe Technology (Outer pipe dia./Inner pipe dia.) Minimum 100 mm dia borewell GI pipe 2000 mm long, 80/ 50 mm, Terminal 50 mm x 6 mm GI strip.
1
-
5007
... More
S & Laying following size earth wire in horizontal or vertical run in ground/ surface/ recess including riiveting, soldering, saddles, making connection with GI/ Cu thimble etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR14 SWG copper wire.
20
-
20
... More
P & Fixing of ISO Certified made BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan as per PWD specification for electrical works, conforming to IS : 374-2019, & IS: 1885 - P-V-1981. with down rod up to 30 cm. with secondary support safety cable (steel wire), cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper condctor making connection testing etc. as required. Appropriate OEM test certificate shall be submitted by contractor. All as per pre approved by Engineer in charge. For addtional technical parameters of products/ work, refer Annexure 'A' attached with this BSR 1400 mm sweep BEE 3 Star rated (service value =5.0 to 5.5)
40
-
1684
... More
P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR.
40
-
91
... More
S & F of Street light bracket made out from following size of ' B ' class G.I. Pipe confirming to IS : 1239 P-1 (2004) with heavy duty pole clamp, Saddles suitable fastners etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR 25 mm dia.
5
-
220
... More
Providing & fixing in position frame made out of M.S. angle (reiveted or welded) as per IS : 2062-2011 finished with two coats of red oxide and two coats of enamel paint including cutting, welding, holes etc. of following sizes as required. All drawing as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure 'A' attached with this BSR 25 mm x 25 mm x 3 mm.
4
-
92
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements