Swami Keshwanand Rajasthan Agricultural University Tender

Supply of 4 doors Book case in latest design with glass panels, inside sliding glass shutter, Spray Paint, Overall size: H-1740 × W-915 × D-320(mm) All steel parts of 22 swg CRCA IS 513 D grade sheet, Door 20 swg CRCA IS 513 D grade sheet. Each door has 4 mm glass, Good quality locks with S. S common keys in duplicate. Adjustable stud provided to protect from water during floor cleaning. As per direction of engineer in charge.

Supply of Glass Door Cabinet with 4 adjustable shelves, 2 doors with 4 glass panels and lock, S.S. keys in duplicate, Spray Paint, Overall size: H-1980 × W-915 × D-485(mm) All steel parts of 20/22 SWG, CRCA IS 513 D grade sheet. Good quality locks with S.S. common keys in duplicate, As per direction of engineer in charge

Conference Table:-Overall 5 Nos of Size-2100*690*750 (mm) per unit of Table joint as per requirement Designed for professionals office staff, Table top to be made of 25mm thick Medium Density fiber Board with post form and PVC edge band of 2mm Thickness. The table shall have adequate amount of PVC cable managers as per the requirement of the table. An impressive and innovative use of the connection tops has been done in forming a tailor made conference Table, which can be just as big as is required by the users. The connection tops is made of laminated MDF board & are painted with scratch resistant vacuum pressure paint, standard spec. applicable. A chrome plated metal leg is made use of to support the connection top, which has a shoe cum leveller too. Metal legs of 75mm diameter/chrome plating layer which is 0.1mm think and the pipe thickness is 1.5mm, standard spec. applicable. As per direction of engineer in charge

Supply of Digital podium, Compact, versatile and easy-to-assemble wireless Lectern Amplifier with built in 40W amplifier. Contains a built-in speaker system consisting of 3nos. 6.5” (165mm) coated dual cone speakers. Provision given for connecting external speaker, if required. Supplied with a detachable gooseneck condenser microphone and a reading light for the podium top. Contains a built-in VHF wireless diversity receiver. High quality VHF handheld wireless transmitter supplied. (Available in different frequencies). Provision for connecting a wired microphone through a 6.3mm phone jack or a line source through an XLR connector. Handheld wireless transmitter & gooseneck podium microphone have voice priority over all other inputs. This feature can be switched ON or OFF through a slide switch. Built in digital recorder cum MP3 player, which can record on USB pen drives or SD cards. Facility for connecting a stereo auxiliary source through L&R RCA plug. It accepts four different sensitivities of auxiliary signal which are selectable through a slide switch. Seperate output connectors for LINE OUT & REC OUT through mini male XLR & 6.3mm phone socket respectively, allowing the lectern system to be connected to external amplifiers for further amplification, if required. Tonal adjustment can be done through cut-boost type Bass & Treble controls. Rugged & stable floor standing base. Can be fixed to the floor with brackets (provided), if required. Operates on 240V 50Hz mains supply. As per direction of engineer in charge

SITC of mikeset for conference table system having 1 chairman unit and 2 delegate units. It shall also have 4 wall mount speakers of 10w and a controller for these units.

LED TV 49 inch, Resolution UHD(3840x2160), Brightness 350 nit or above, Native/static contrast ratio 4000:1 or better, response time 8ms or better, Operation Hours 16/7 or better, Haze 2% or better, speakers 10w + 10w, Connectivity DVI-D, USB-2, HDMI-2, External Control RS232C (in/out) through stereo jack, RJ45, Special requirements (signage Magic player in built, wifi, Bluetooth, IP5x rating, inbuilt web browser, should support remote desktop protocol), Media Player should be in built, Storage (FDM) should be 8 GB or more., Energy star rating 7.0 (USA), Certifications BIS UL, FCC. The OEM shall have a local service centre in the city and the bidder shall have OEM authorisation. As per direction of engineer in charge.

Sofa set wooden with cushion set 3+1+1 Seater  - Sofa set in sheesam wood chemically seasoned, front 600 mm height, Back 750 mm Height, seat height 450 mm and 100 mm core foam of 40 Density of PU foam seat and 12mm thick softy foam on core foam, back seat 75 mm core foam of 40 Density and 12mm thick softy foam on core foam. The seat and back to be fixed on a frame of solid wood as per the design approved. 1 seater sofa, seat 550*550 mm & 3 seater size 1650*550 mm with wooden melamine polish with approved shade, As per direction of engineer in charge

Centre Table:- Supply of centre table made out of sheesam wood chemically seasoned. The size of the centre table shall be 1200x600x450 mm (W*D*H). It shall also have a shelf in between. The top can be made of solid wood or of Glass 12mm thick. The complete table to be polished with approved shade and melamine polish, the design to be approved by the engineer in charge.

Dining Table- Supply of Dining table to be made of chemically seasoned sheesam wood. The size of the table shall be 2400x900x750 mm (w x d x h).The top to be made of shesham wood and 25 mm thick medium density fiber board with post form and PVC edge band of 2 mm thickness. The legs to be made of wood size 100x100mm thick and the design to be approved by the site in-charge, The Top shall be supported with side members of 75mm wide and connected with legs to provide complete support and steadiness. The table to be polished with approved shade and melamine polish complete as per the directions of the engineer in charge.

Dining Chair- The dining chair to be made of chemically seasoned sheesam wood. The size of the chair shall be 450x450x1050mm (wxdxh). The seat shall be made of foam of 32dn and 50mm thickness to provide comfort. Melamine polish to be done on the chair. The design and polish shade to be approved by the engineer in charge.

Side Table for bed with drawer:- Supply of side table for bed having overall size-450x450x450 (W*D*H), Made out of chemically seasoned shesham wood. It shall have one drawer on the top and open shelf below. The complete side table to be polished with approved shade and melamine polish as per the direction of engineer in charge

0ffice Almirah:- Dimension: -overall size of Almirah, height: 1980 mm width: 916 mm depth: 486 mm. Construction & material: - crca sheet for shelf and body. Welded construction out of 20/22 Gauge sheet. Locking & handle: Mazak, handle. Three way locking mechanism with shooting bolt. Shelving -height wise maximum uniformly distributed load capacity per each full shelf.4 nos. It shall have spray paint and color as per direction of engineer in charge.

Display board- Wooden/Metallic display board of size 1200*900 mm (L x W), having Shatterproof acrylic/glass door to protect important Notice and keep information safe inside the cover with a durable showcase lock (included keys). Easy post and update information on the fabric pin board. Can be use as notes board, office public message bulletin etc. Easy to install on a wall, or other flat surface, it can be horizontal or vertical mounting, with instruction and fixing kit supplied. As per direction of engineer in charge

Curtain :-Size 1200*2100 mm, long Crush Type, With Ring, Colour as per buyer choice, As per direction of engineer in charge

Conference Room Chair :- Seat-Back Assembly- Seat & Back are made of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam is designed with contoured lumber support for extra comfort. Back Size 49.5cm(W)x47.0cm(H) and Seat size49.5cm(W)x44.0cm(D). The polyurethane foam is molded with density =45±2kg/m3-. ArmRests- The one piece armrests made of black integral skin polyurethane with 50-70 Shore Hardness and reinforced with M.S. insert. The armrests are scretch and weather resistant. The armrests are fitted to the seat with seat armrest connecting bracket made of 0.3 cm thick steel. Tubular understructure- The understructure is made of M.S. tube dia. 2.54cm. (1")x14swg thick and black powder coated.

Mattress For Single Bed 78"x35" with pillow and cover Thickness: 100 mm bonded of 80 density with 25mm thick PU foam of 40 Dn. It shall have twill fabric with both side quilt. According to the size of bed Mattress should have bonded foam, gives a good sleep, devoid of any discomfort and backaches. As per direction of engineer in charge

Mattress For Double Bed 78"x70" with pillow and cover- Thickness: 100 mm bonded of 80 density with 25mm thick PU foam of 40 Dn. It shall have twill fabric with both side quilt. According to the size of bed Mattress should have bonded foam, gives a good sleep, devoid of any discomfort and backaches. As per direction of engineer in charge

Bed sheet single cotton, (White 220 TC) 150cmx229cm of Bombay Dyeing, century, Mafatlal as per the direction of engineer in charge.

Bed sheet Double white 220 TC 224*274 cm Plain white coloured cotton fabric bed sheets with pillow cover. As per direction of engineer in charge

Blanket with cover Single-1600*2250 mm mink blanket of polyester double layered. As per direction of engineer in charge

Computer/Desk Chair Revolving - medium back revolving chair, foam with PU upholstery on seat & back, pp handles with PU upholstery, regular tilt mechanism with single position locking, nylon base with nylon wheels, the seat & back shall made of 12 mm thick hot-pressed plywood upholstered PU ( stylish leather like upholstery ) cover & moulded polyurethane foam. The Back Size 49.5cm(W)x47.0cm(H) and Seat size49.5cm(W)x44.0cm(D) the polyurethane foam density 45+/-2 kg/m3, the back foam shall be designed with contour lumber support for extra cushioning, As per direction of engineer in charge.

Three Seater:- Supply of 3 seater bench having perforated seat and back of size 50cmx50cm made out of 1.2 mm thick cold rolled steel powder coated perforated seat fixed with triangular support from back with hole design and in curve shape on top and bottom for maximum comfort, with galvanized nut and bolt. The triangular centre beam of 17 cm x 17 cm x 11 cm made out of 1.2 mm thick cold rolled steel duly powder coated duly fitted with galvanized nut and bolts arms and legs also made out of 1.2mm thick cold rolled powder coated steel sheet with plastic pads and supports. overall size of 3 seater bench shall be 1765mm L x 775mm w x 710mm d and weight approx 35Kgs. As per direction of engineer in charge

Lab stool: - overall size- 450*450*650 mm revolving stool with seat made with PU foam with good quality tapestry. As per direction of engineer in charge

Single Bed With Iron Pipe Frame Approx weight 22 Kg. – Size 78x35, leg size 50*25 mm rectangle,12 mm ply water proof & ISI mark , Size Pipe 50*25 mm, height 450 mm, head rest 375 mm with 4 support, ply support with 5 pipe 25*25 mm, As per direction engineer and in charge

Double Bed :- Supply and fixing of double bed Size 78"x70", made out of chemically seasoned sheesham wood. The side supports to be made of shesham wood of size 3”x1.5” and the top ply to be used is of 12mm thickness. Complete bed to be polished with the approved shade and melamine polish, As per direction of engineer in charge