Sri Karan Narendra Agriculture University Tender

Providing and layingdamp-proof course with cement concrete grade M-150 (1:2:4) mortar prepared with1% solution of water proof compond) including two coats of hot blown bitumen (2 Kg. P.Sqm) complete as per specification with glass strip 3 mm thick at a distance of 1 Meter interval: 50 mm thick

Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks : Cement mortar 1 : 6 (1 cement : 6 coarse sand) + Add Extra over item No. 5.1 for brick work in superstructure up to third storey.

Half brick masonry in foundation & plinth using bricks of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement 1 Sqm. 6mm MS bar 2×2×1.00 = 4.00 Cement mortar 1 : 6 (1 cement : 6 coarse sand) Add extra over item No. 5.8 for half brick masonary in superstruture up to third story

Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: above plinth level up to 4.5 Mtr height in R.S. joists flats, tees, angles and channels.

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. above plinth level up to 4.5 Mtr height in R.S. joists flats, tees, angles and channels.

Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture out of 0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvaiumeseel (as per 150gsm zinc aluminum coated 550Mpa tuekd strength) confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and centre width of 1020mm shets be casted with regular modified plyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate at made at to prevent leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and foe a minimum up to 12mts with all scaffolding. Add extra for 0.60mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvaiumeseel sheet in place of 0.50mm thick

Providing and fixing 60mm thick cement concrete flooring with Metallic concrete hardener topping, under layer of 42mm thick cement concrete 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 18mm thick nominal size) and top layer of 12mm thick metallic concrete hardener consisting of mix 1:2 (1 cement : 2 stone aggregate, 6mm nominal size) by volume & mixed with metallic hardening compound of approved quality @ 3Kg./Sqm including cement slurry, rounding off edges etc. but excluding the cost of nosing of step etc. complete.

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40mm wide and 4mm thick

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick.

Painting with weather coat paint (Asian paint/I.C.I./Berger or eq. ISI make paint) two or more coat to give an even shade on new work.

Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Windows side hung

Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint. MS Sheet 20 SWG Add Extra for double leaf shutters

Painting with enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing 30 to 40 mm thick stone chajja in cement mortar 1:4 (1 cement : 4 coarse sand) including making gola at junction with wall in cement concrete M-15 grade (1:2:4 nominal mix), drip course: Pointing both faces in CM 1:3 with an admixture of pigment matching the stone shade.