Ridcor Limited Tender

Thermoplastic pavement marking with hot applied thermoplastic materials for road markings with surface application of glass beads at specified rate complete as per drawing, Technical Specification Clause 803 and as directed by the Engineer. Thermoplastic marking with material conforming to Clause 803.4 of MoRTH having TiO2 (for white) minimum 10% and softening point 102.5 ±9.5°C (a) Lane, Centreline, Edge ,pedestrian crossing markings and other marking along strips for 5 mm thickness of marking(excluding drop on glass beads)

Thermoplastic pavement marking with hot applied thermoplastic materials for road markings with surface application of glass beads at specified rate complete as per drawing, Technical Specification Clause 803 and as directed by the Engineer. Thermoplastic marking with material conforming to Clause 803.4 of MoRTH having TiO2 (for white) minimum 10% and softening point 102.5 ±9.5°C (a) Directional arrows, letters and marking as per drawing and specifications

Providing and fixing of retro-reflectorised Signs made out of 2 mm thick aluminium sheet bolted & welding on MS angle iron frame of size 40x40x5 mm, back side of plate is painted in two coats of epoxy grey paint after etching treatment of plate on both sides.The face of aluminium sheet is fully covered by retro reflective sheeting , having the coefficient of retro reflection determined in accordance with Type-XI, Class-1 ASTM D 4956_ 01a standards and letter / matter in similar type of sheeting or cut out in overlay film.This structure has fixing provisions to posts of M.S. pipe 75mm OD heavy duty(with hold fast of size 30 to 40 cm at bottom)(duly painted in alternate bands of 25 cms.black and white with 2 coats of superior quality of synthetic enamel paint after applying red oxide zinc chromate metal primer) and duly welded to backframe of sign plate, firmly fixed to the ground by means of properly designed foundation with M 20 grade cement concrete minimum60 cm x 60 cm x 75 cm below ground level as per approved drawing including labour and hire charges for machineries involved etc., complete as per Technical Specifications Clause 801 including Supply & Fixing of cage for covering the New sign board madeup of 3.1 mm thick M.S. welded wire mesh has an opening size 50 mm X 50 mm. (duly painted in black with 2 coats of superior quality of synthetic enamel paint after applying red oxide zinc chromate metal primer) and cage will duly welded to backframe of sign plate, as per approved drawing including labour and hire charges for machineries involved etc., complete as per Technical Specifications and as directed by the Engineer. (a) Size 600 X 900 mm 2 Pipe upto top of frame( Total pipe Ht. 3.3Mtr Apprxox Wt. of 1 Pipe 18Kg)