Rajcomp Info Services Limited Tender

Providing and laying Half brick masonry in Superstructure , above plinth level upto all level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) including scafolding

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar & water proofing compound, including disposal of rubbish within 5 km all complete as per the direction of Engineer-In-Charge.

Providing and fixing Chicken mesh jali (22 gauge) at the junction of 2 different surfaces of different material component at the time of plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and lifts etc.complete.

Providing and laying Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 12 mm thk. (the rate is inclusive of work upto all floor level including scaffolding & double scafloding )

Repair work of existing Wooden/MS/Aluminium windows & Vents (with frame) including wire mesh, wooden board, grill, glass,hinges, handles, frame, joints etc. Making windows in working condition and lockable, glass cleaning or change if broken. (lumpsum)

Providing and fixing of Double leaf/ Single leaf Flush door with door frame 150mm*75mm and - 35mm th. door finished with laminate and glasez pane in between on both sides.. Shutter to have 35mm wide and 12mm thick lipping beading allround finished with enamel paint of approved brand, colour and shade., Cost to include necessary hardwares door closer, hinges, etc., complete. Size 4'*8'. Details to be followed as per engineer in charge. Laminate Make:- Archid White by Merino.

Providing and fixing Grid type false ceiling of 14 mm thick Acoustical with fine fissured tiles/ Mineral fibre high density tiles with butt edges false ceiling tiles of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge. ( The tiles should of 90 % RH avg. NCR 0.55 light reflectance 80% thermal conductiveity K = 0.052-0.057 w/m K colour white. Fire performance class 0/class I(BS 476) with warranty against sag)

Providing and fixing Gypsum False Ceiling as per India Gypsum Specifications made of standard G.I. Sections and 12.5mm thick gyp board sheets inclusive of all hangers, edge members and other clips complete, with sheets fixed with proper screws by power drills and joints duly finished ensuring level in line and plumb to take final paint. All inclusive of detailed cut-outs for light fixtures, AC grilles. The cost to be inclusive of surface preparation ,3 coats of acrylic emulsion paint including the top coat as per INDIA GUPSUM STANDARDS ( MODE OF MEASUREMENT L x B) .

Full body Vitrified Tile:- Providing & Fixing flooring with skirtring of Premium quality Full body Vitrified homogenous unglazed, uncoated, metal pressed, ready to install on floor & walls having fine machine cut edges with smooth surface finish 600x1200 mm, 12mm thickness or different sizes of over cement mortar 1:3, 20 mm thick mortar or or chemical laying as per the instruction of engineer incharge, with water absorption less than 0.08 % and conforming to BIS 15622:2017 titles alkali & acid resistant for all parameters including grouting the joints with white cement and matching MYK laticrete grout etc. complete size 600x1200 mm. Complete in all respect as per instructions of engineer incharge. Mode of measurement will be floor area only. Approved makes: Jhonson, Kajaria, Qutone, RAK, Restile. Base Rate Rs 95.00/sqft excluding GST

Providing and laying of Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate.

Providing and laying Internal Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.

Providing and laying of External paint on walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).

Providing and laying Enamel Painting (two or more coats) on door and windows with synthetic Enamel paint/enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. Colour to be taken approval from engineer in charge

Terrace Water Proofing Supplying and Installing complete in all respects waterproofing as per given standards,and finally installing broken china mosiac tiles as per specification below 1) Waterproofing with 2 component chemical - Cleaning the surface to remove all loose particles and any deleterious matter. Treatment of Cracks/construction joints as per specification – A U shaped groove will be made of 10mm wide and 15-20mm deep which will be filled up with Kasa Sbr 1103 or equivalent cement putty consistency one parts of compound bonding Polymer Mixed with one part of Cement. One primer coat of Kasa Sbr 1103 or equivalent mixed in a ratio of 1:1:1 with cement and water using fiber net on entire area. Making of Gola Side gola 75 X 75mm in the corner of the wall and floor by cement mortar mix with Kasa Sbr 1103 or equivalent. one coat of Kasa Hydrostop 2k or equivalent (An elastomeric waterproof coating) mixed with pre measured high strength elostomeric polymer which forms a flexible reinforced membrane on the entire surface.Final Waterproofing coating-Second Coat of Kasa Hydrostop 2k or equivalent (An elastomeric waterproof coating) mixed with pre measured high strength elostomeric polymer Labour rate including all other tools and transportation complete in all aspects. 2) Providing and laying Mosaic tiles 200mm x 200mm finish with all sides of vata using 20 mm base of cement mortar 1:4 ( 1 cement : 4 Fine sand) with cement slurry @ 2.75 Kg of cement per Sqm, mixing of water proofing material including filling up the joints with grey pigmented cement rounding of edges and corners all complete as per the direction of Engineer in charge. Certificate of Terrace Waterproofing Warranty for a period of 5 Years to be submitted.

Furniture (supply and Installation of following items)

SITC of Office Table :- 1500W X 750D X 750H UNITIZED T25 TABLE WITH INTEGRATED HDU Main Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Return Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel-Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members-Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating.Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Access Flap: Flap with provision and SITC of 2 nos 16 Amp modular Switch and 3 nos 6/16 Amp modular Socket with 2 nos CAT-6A LAN I/O point as per approved make and wire flow can be made as per requirement of Engineer in Charge. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate . This is fixed with worktop along the depth at Access Flap position. Integrated Hinge Door Storage with Drawer-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with slide on hinges and handle is provided for ease of opening. Drawer is provided with ebco metabox slide and lock for security. This product should be certified by GREENGUARD, Indoor Advantage GOLD, GRIHA & SVAGRIHA & GREEN PRO. Providing, supplying and placing of pedestal. BODY All Panels :- 18mm PLB board. Side, Bottom Panel :- 0.8mm PVC Edgeband. Back Panel :- No Edgeband 0.8mm PVC Edgeband for BF Pedestal. Top Panel :- 2 mm PVC Edgeband. 0.8mm PVC Edgeband for BF Pedestal DRAWERS Fascia :- 18mm PLB with 2mm Edgeband. Back Panel :- 18mm PLB with 0.8mm Edgeband. Bottom Panel :- 6mm PLB MDF - No Edgeband. Handle :- MS Powder coated handle. Slide :- Powder coated Single extension full panel drawer Slides with rollers. File Drawer :- File drawer provided with fifth roller arrangment DRAWER INSIDE CLEAR SPACE - Box Drawer - 323 (w) x 376 (d) x 73 (h). File Drawer - 293 (w) x 376 (d) x 208 (h) CONSTRUCTION Assemble unit LOCKING -BBF Pedestal :- Cam Lock & Central RH locking with actuator lever & locking strip mechanism for Box - Box - File. LEVELLER - BBF & FF PEDESTAL :-Leveller base height 18mm height with levelling adjustment max. CASTOR - BBF & FF PEDESTAL :-Wheel Dia 30mm with Mounting Plate Castor - Non Lockable.

SITC of MEETING TABLE :- 2100WX1200DX750 H or 1800WX1200DX750H Providing and placing "UPBEAT"desk based modular workstation with System ht - 750 mm. LEGS: Providing metal powder coated Trio leg. UNDERSTRUCTURE: Comprising of metal powder coated cross connectors between legs and legs. Made up of metal powder coated finish and the entire assemply is fixed to the worktop. WIRE MANAGEMENT: Standalone power box with wire riser have been considered. 2 Nos Access Flap, Each having provision and SITC of 2 nos 16 Amp modular Switch and 4 nos 6/16 Amp modular Socket with 2 nos CAT-6A LAN I/O point as per approved make and wire flow can be made as per requirement of Engineer in Charge for Power and Data points. WORKSURFACE - Out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 2100 mm w x 1200 mm d. Note: All legs have levelling screws for adjustment in case of Uneven floor to take care of +/- 50 mm of uneven flooring. Product shall have GREENGUARD from UL, Indoor Advantage GOLD, GRIHA & SVAGRIHA, GREEN PRO certificates.

SITC of Chair with Headrest (Mentor's Chair) Pulse chair - 1.SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ± 0.1cm thk. hot pressed plywood OCP-QLTA-PL14-18.The Back should be made up of injection moulded glass filled nylon & upholstered using Net fabric with high tenacity yarn. Product shall have GREENGUARD GOLD,Indoor Advantage GOLD,BIFMA Level 2, GREEN PRO certificates. SEAT SIZE: 47.0 cm. (W) x 51.5 cm. (D) BACK SIZE :45.0 cm. (W) x 65.3 cm. (H) 2.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf for 25% compression. 3.ARMRESTS : The armrests have an Up-Down adjustment of 8.5 ± 0.5cm which should be provided in armrest structure. Armrest Top has an integrated layer of Thermoplastic Elastomer (TPE). 4.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consshould be ts of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height. 5.FRONT PIVOT SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features. • 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. 6.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. 7.PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia should be ∅66.1 ± 0.5 cm (76.1 ± 1.0 cm. with castors). 8.TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black Nylon. The Neckrest assembly consshould be t of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. Neckrest should be fixed to Back Assembly through Neckrest connector. Neckrest assembly has height adjustment of 4.2 ± 0.5 cm and rotation adjustment of overall 76°± 2°. The complete neckrest assembly should be retro fit to the main chair.

SITC of Chair without Headrest (Workstation Chair) Pulse chair - 1.SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ± 0.1cm thk. hot pressed plywood OCP-QLTA-PL14-18.The Back should be made up of injection moulded glass filled nylon & upholstered using Net fabric with high tenacity yarn. Product shall have GREENGUARD GOLD,Indoor Advantage GOLD,BIFMA Level 2, GREEN PRO certificates. SEAT SIZE: 47.0 cm. (W) x 51.5 cm. (D) BACK SIZE :45.0 cm. (W) x 65.3 cm. (H) 2.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf for 25% compression. 3.ARMRESTS : The armrests have an Up-Down adjustment of 8.5 ± 0.5cm which should be provided in armrest structure. Armrest Top has an integrated layer of Thermoplastic Elastomer (TPE). 4.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consshould be ts of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height. 5.FRONT PIVOT SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features. • 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. 6.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. 7.PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia should be ∅66.1 ± 0.5 cm (76.1 ± 1.0 cm. with castors). 8.TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black Nylon. The Neckrest assembly consshould be t of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. Neckrest should be fixed to Back Assembly through Neckrest connector. Neckrest assembly has height adjustment of 4.2 ± 0.5 cm and rotation adjustment of overall 76°± 2°. The complete neckrest assembly should be retro fit to the main chair.

SITC of Chair (Visitor's chair) (Without Wheels) oxbo visitor - 1.SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. Product shall have GREEN PRO, GRIHA & SVAGRIHA, GREEN PRO certificates. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) 2.BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm. (W) x 60.5cm. (H) 3.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 4.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. . 5.TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should be cantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube.

SITC of 4 Door Book Case shall have the configuration of 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Product shall have GREEN PRO,Indoor Advantage GOLD,GREENGUARD from UL certificates.

Low Height Partition:- Providing and fixing low height partition of height 1200mm from finish floor. Partition to be fixed on floor with all necessary hardware. Structure made out of Aluminum frame of size 1"x2" approx with both side 12mm Ply wood fixed with screws finished with 1mm laminate of approved brand and shade having grooves and design as specified by engineer in charge. Top and side edges of partition to have Aluminum edge lipping of matching shade. Including soft board on both sides of height 2' cladded with linen based fabric of approved shade and texture. Soft board aligned with top of partition. Details can be found as per 3d views attached in RFP.

Supply & installation of Manual Roller blinds having Aluminum Roller tube along with fabric pasted on it with glue having control unit for manual operations and bottom bar Aluminum powder coated for weight purpose, including fabric, fitting & accessories of approved make & colour etc. complete.

Supply & Installation of 3M Vinyl IJ 35C in digitally produced graphic design with Matt overlaminate to protect the print from fading, which will come in a matte finish with approved artwork digitally reproduced with water-based inks certified to have no hazardous air pollutants. Self-adhesive, bubble-free installation to be done on a smooth, dust free putty surface that has a coat of oil-based primer, by Authorized Installers only. Fire rating is ASTM -E84 . Certificate of image license and 3M Interior Warranty for a period of 3 Years to be submitted along with invoice.

Providing and fixing of Ceramic writing board with 25 X 40 beechwood/ approved beading on 12mm ply - size 2400 x 1200

Providing and fixing of hoardings outside the building as per size give by engineer in chargeApprox. Dimensions:1200mm(W) X 900mm(H) with provision of backlight

Providing and fixing of Logo in reception made up of laser cut Anti-Corrosive high grade AISI 316 Stainless Steel size 1mtr by 1mtr .details given by engineer in charge.

Providing and fixing Name plate for individual cabin and rest of the area. Signage's are made up of laser cut Anti-Corrosive high grade AISI 316 Stainless Steel of 2mm thick sheet with laser cut method for impression and with satin finish. Approx. Dimensions: 300 mm X 170 mm X 2 mm.Design and detailing provided by as per engineer in charge

Electrical (supply and Installation of following items)

WIRING

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr.)

Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, 6 A switch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.

On board

Wiring of Power plug point with 2.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 2.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, 16 A switch, 16 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.

On board

S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

20 mm

25 mm

32 mm

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free ( 10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4, , in existing surface or recessed PVC/ MS conduit/casing capping including all as per pre approved by Engineer in charge,making connections, etc. as required. as per recommended makes of RFP.

3x 1.5 sq.mm

2 x 2.5 sq. mm. + 1x1.5sqmm

2 x 4.0 sq. mm. + 1 x 2.5 sq. mm.

4 x 10.0 sq. mm. + 1 x 6.0 sq. mm. (DB supply)

DISTRIBUTION BOARDS

Providing & Fixing of 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C tripping characteristic as per type of load and site requirement) 4KV impulse withstand voltage, as per specification for electrical Works with ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , IP 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 A rating and 10,000 upto 63 A, 5000 for 80 A rating including making connections, testing etc. as required. . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

Single pole MCB

6 A to 32 A rating

Double pole MCB

6 A to 32 A rating

Providing & Fixing of 240/415 V Residual current circuit breaker (RCCB) conforming to (IS:12640-1)/ IEC 61008 -1 , rated 4 KV impulse withstand voltage truly current operated and shall operate on CBCT mechanisum, provision for pad lock, min. operation 10,000 upto 63 A rating and 5000 for 100 A rating and minimum phase termination capacity of 35 sq.mm. rigid wire , IP 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Two pole 100/300mA sensitivity

40 A rating

P&F Recessed/ Surface mounting heavy duty horizontal type prewired sheet steel Distribution board phophatised / powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, loose wire box, terminal block , duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks conforming to IS:13032 & IS:8623 including making internal DB terminations with copper lugs , testing etc. as required.

Metal door (single phase) IK-09 and IP-43 with Metal end box

12 Way (12+2)

Lighting

Providing & Fixing of IP20, 2'x2' LED Surface/ Recessed mounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency 85% , with Short & Open circuit protection (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD 10 % , p.f.≥0.95,CRI 80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.

OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Recessed Mounting

Minimum lumen output 3000 lm

Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / Sqaure SMD Mid Power LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency 85% . System Lumen efficacy of ≥ 110 lm / watt, THD 10 % , Pf.≥0.95, CRI 80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. As per approved make of RFP

Recessed Mounting

Minimum lumen output 1950 lm

Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade Ceiling Fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 100 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

1200 mm Sweep BEE 3 Star rated (service value =5.0 to 5.5 )

Providing & Fixing of 450 mm Sweep Oscillating type Wall mounting / Pedestal type fans with Three speed, ON and OFF position, Sintered Iron bush oil impregnated, with metal front and back 120 or more ribs guard; Three no. Aluminium blades, minimum Air delivery 100 Cum. / Minute , Minimum Service Value 1.11 Cum./min/watt, noise level should be = 75 dB, power consumption = 120 watts, motor protection through thermal overload protection device, including fixing with anchor bolts, making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Wall mounting type with Adjustable Vertical Angle

EARTHINGS

Plate Earthing as per PWD specification for electrical Works as per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" Rajasthan PWD BSR 2022.

S & Laying following size Earth wire/strip in horizontal or vertical run in ground/surface/recess on SMC insulator including riveting, soldering, saddles, making connection etc. as required.

8 SWG Cu wire

LAN Services:

DATA ,CCTV & TELEPHON WORK

Supply & Installation of IP-20 & IK-08 , UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with 'U'Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19" angles with wall mounting provision on wall. Accessories like: 1 No of 19" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19" 1U, mountable socket strips with 5 nos of 16A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

6 U Rack with Width 600 mm & Depth 400 mm + 100 mm

Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6A patch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with FRPVC/LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectors as per ANSI/TIA/EIA 568 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568, minimum requirement for 1G BASE-T/ 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes, Minimum 750 to 1000 mating cycles in plug contacts for long durability complete in all respect. All as per pre approved by Engineer in charge. as per recommended makes of RFP.

Cat 6, UTP (Un-sheilded Twisted Pair) Patch Cord

1 Mtr

2 Mtr

Supply, Installation, Testing and Comissioning of Rack mounted 19" 1U, Cat6 24 Port loaded, 1.5-1.6 MM CRS chasis, powder coated, sheet steel, made of plastic (ABS), Modular Patch Panels with Rear Cable management system and mounting hardware to mount the patch panel. Should have port identification numbers printed/engraved on front of the panel. Etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Modular Patch Panel Loaded with Cat -6 I/O

Supply , Installation, Testing and Comissioning of Managed Layer-2 Intelligent 10/100 Ethernet Switch providing 24 x 10/100/1000 MBPS Giga Ethernet ports / with min 2 SFP Giga Ports (provision for Fiber Giga connectivity) with related LAN Base Software including making connections etc as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

Supply and Installation of unsheilded/ sheilded Information outlets made of high impact plastic body with ABS, FR Grade with provision for protection against dust in jack/ FP, suitable for Cat 6/6A application complying to latest ammendments, According. to Cat. 6/6A channel, It should support channel as well as components requirements of Cat.6/6A standards at frequencies of up to 250 to 500 Mhz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair, 23/24 AWG solid/stranded wire diameters, using 100 Ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact punch termination on reliable copper tin plated Insulation displacement contact, It complied with ANSI/TIA/EIA 568 standard. In existing modular/MS Boxes along with necessory connections as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

Cat 6, Un-sheilded Information Outlet

Supply, Installation, Testing & Commissioning- 65 inch Professional Interactive touch Display with 350 nits or more brightness, Brightness : 350nits Multi Touch Point : 20 Points (Max.) Interface : HDMI (3), RGB (1), Audio In (1), RS-232C In (1), RJ45 (1), USB 3.0 Type A (3), USB 2.0 Type A (3), Audio Out / Optical Output, Touch USB (2), USB Block Mode , Panel Technology IPS , Back Light Type Direct Aspect Ratio 16:9 , Native Resolution 3840x2160 (UHD) Refresh Rate 60Hz ,Brightness 350nits Contrast Ratio 1,200:1 , Color Gamut NTSC 68% Viewing Angle(H x V) 178 x 178 , Life - time 30,000 Hrs. Color Depth 10bit, 1.07Billion colors Surface Treatment (Haze) Anti-Glare, 7H(Mohs), Operation Hours (Hours/Day) 16/7 Orientation: Landscape, Air GAP 1mm Screen protection 7 Mohs, Input - Video / Audio HDMI (3), RGB / Audio In Input - External Control RS232C In, RJ45 Output - Video / Audio Audio Out / Optical Output, Internal Memory (32GB), SoC (Dual core A73+Dual core A53), DDR(3GB), Wi-Fi (Built-in, Slot type), Power Indicator, Local Key Operation (1, Power button) Android android 11, CERTIFICATION: Safety CB / NRTL EMC FCC Class "A" / CE ErP / Energy Star- Yes, BIS.