Rajcomp Info Services Limited Tender

SITC of Free Standing Pedestal storage Versatile 3-drawer office pedestal system solution shall be made up of 0.8mm ‐ 1mm CRCA sheets with powder coated finish. The drawers are meant to store stationary items like pens, calculators, staplers, files, folders, documents etc. It comes with sliding drawers and single lock operation along with caster wheels for 360‐degree movement. The pedestal storage shall be Greenguard gold tested/certified (from UL / Intertek). The manufacture shall be FSC certified. Approximate minimum Dimensions – 420mm(W) X 450mm(D) X 550mm(H) Detailed specifications and mode of execution is mentioned in technical Specification of RFP.

SITC of Chair Medium Back, Mesh Back, Silver Epoxy Backbone, Synchronized Mechanism,Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong nylon Base, Seat - Fabric and mesh backrest, Detailed specifications and mode of execution is mentioned in technical Specification of RFP.

SITC of Training Table 1) Tabletop shall be of 25 mm thick MDF board. 2) The working side edge: - UL Audit certified design feature on front modular Polyurethane (PU) Edge. High density Poly Urethane Foam moulded on industrial grade aluminum core to form minimum 50mm deep tapered edge to be installed on worktop. The edge shall be mechanically replaceable within 30 minutes in case of damage or wear without opening or removing the top. 3) Legs: The leg is made out of metal sheet. 4) Under structure pipe shall be made up of minimum 1.6mm thick CRCA Laser cut components, powder coated with the matching shade/color/finish. 5) Accessories : switch board with SITC of 2 nos 16 Amp modular switch and 2 nos 6/16 A modular universal sockets with 1 no. cat-6 LAN socket 6) The manufacture shall be FSC certified. 7) The table shall be Greenguard gold tested/certified (from UL / Intertek). Approximate minimum Dimensions – 1050mm (W) X 750mm (D) X 750mm(H) Detailed specifications and mode of execution is mentioned in technical Specification of RFP.

SITC of Chair Type 4 Low back visitor model ABS for seat, Mesh back with extra lumber Support with fine tuning for depth adjustment, with fixed armrest, silver epoxy cantilever base Upholstery: Black Fabric Seat & mesh backrest Detailed specifications and mode of execution is mentioned in technical Specification of RFP.

SITC of Acoustic Metal Paneling 1) Factory-made removable type self-inter-lockable metal panels with a front sheet of preformed textured hot-dip galvanized sheet with rigid polyvinylchloride (PVC) film on one side and on the other side a coating to avoid rust (sheet thickness 0.6mm & PVC Coating at least 0.11mm). The back cover of the panel shall be made up of a 0.6mm thick CRCA/GI sheet of approved colour. The panelling design shall comprise of a specially designed combination of perforated and non-perforated panels through CNC laser cutting, bending & punching. The panelling/partition shall be Greenguard gold certified from UL / Intertek. Panels shall be designed to achieve shape and design as per the design consultant and shall be fixed using GI/CRCA hook fitting on the structure. Overall system thickness for panelling shall be 60mm to 90mm and for partition shall be 70mm to 120mm. 2) Tiles Perforation – To achieve acoustics without deteriorating the aesthetical appeal of the office room it is necessary that the wall panelling tiles have micro-perforations (less than 1.6mm diameter each) all over the surface with a density of 5000 holes per square feet. UL audit certified design feature on modular wall panelling tile having clean perforations and providing smooth finish on front fascia of tiles. The tile shall have 5000 holes per square feet on front side of the tile. 3) To provide an acoustically superior environment and ensure proper attenuation of airborne sound, it is necessary that the sound transmission class (STC) value of wall panelling and the partition should be 35 (According to IS: 9901 (Part III) – 1981, DIN 52210 Part IV- 1984, ISO: 140(Part III) -1995. 4) Seismic safety of users & equipment is a prime concern area. The metal panelling/partition must sustain the seismic vibrations as per design spectrum IS 1893 for zone 4 vibrations. The test must be carried out by an authorized government agency. 5) The wall panelling should be robust & strong enough to sustain the routine loads/minor impacts of typical office room environment. The wall panelling/partition structure shall have UL Audit Certified feature of Load bearing capacity of 300 Kgs to hold any display unit on clamp having minimum length of 750mm. 6) UL Audit Certified feature of Modular wall Panelling tile having secure locking arrangement for equidistant mounting. Locking arrangement enables easy replacement without using any tool within 20 seconds. The feature shall provide easy flexibility of locking all tiles in one column through gravity. 7) The modular metal panelling must comply to the lead-free directive to ensure the restriction of hazardous substances so that the final product does not contaminate the environment. The final product i.e., modular metal panelling does not contain hazardous substances and we give a healthy life to our coming generations it is necessary that the modular metal panelling system shall be RoHS certified (from UL / Intertek). 8) From a fire safety point of view, the metal wall panelling tiles shall be class A fire rated as per the norms of comparative measurements of surface flame spread and smoke density measurements with that of select grade red oak and fibre-cement board surfaces under the specific fire exposure conditions. The proposed wall panelling tiles shall be Class A certified as per ASTM e84 (from UL / Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. 9) The structure shall be made from a modular, heavy-duty powder-coated CRCA frame (minimum sheet thickness 1mm) and shall allow an uninterrupted flow of wires/cable/tubes of maximum diameter 25mm. 10) The structure shall be securely connected from the wall, roof and floor. It shall be made up of a minimum of 1mm thick vertical slotted rolled C sections (Upright) and horizontal rolled ‘C’ connectors. Grid of the desired dimension shall be formed by Vertical and horizontal sections having 20 to 50mm pitch. Detailed specifications and mode of execution is mentioned in technical Specification of RFP.

SITC of Designer metal ceiling of size 550X1150mm 1) Designer metal ceiling of powder coated tiles of minimum size 550X1150mm. 2) Tiles Perforation – To achieve acoustics without deteriorating the aesthetical appeal of the office interior it is necessary that the at-least twenty five percent of the ceiling tiles have micro-perforations (less than 1.6mm diameter each) all over the surface with a density of 5000 holes per square feet. The ceiling tile to have clean perforations and provides a smooth finish on the front fascia of tiles. 3) The proposed ceiling metal tiles shall be Class A certified as per ASTM e84 (from UL / Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. 4) The ceiling shall have a Noise absorption coefficient (NRC) value of 0.60 according to IS:8225-1987, ISO: 354-1985 and ASTM 423-90. 5) To ensure restriction of hazardous substances; so that the final product does not contaminate the environment and we give a healthy life to our coming generations it is necessary that the modular metal ceiling system shall be RoHS certified (from UL / Intertek). 6) Designer metal ceiling shall be greenguard gold certified from UL / Intertek. 7) The structure shall be made from a heavy-duty powder-coated CRCA steel sheet (minimum sheet thickness 0.8 to 1.6mm). It shall be securely grouted from the roof with help of an anchor fastener and GI self-threaded rods.

SITC of Designer calcium silicate ceiling Plain Calcium Silicate Acoustic Boards for false ceiling with 08mm Approximately thick, Structure for underside of suspended grid formed of GI perimeter channels. Wood screws and metal expansion raw plugs for fixing with wall. Plastic emulsion paint of approved make and shade for finishing surface of Calcium Silicate Boards. Specification: Calcium Silicate Board is manufactured from a mixture of Portland cement, fine silica, special cellulose fibers and selected fillers to impart durability, toughness, fire and moisture resistance.Detailed specifications and mode of execution is mentioned in technical Specification of RFP.

SITC of Sign board Providing and fixing Name plate for individual cabin and rest of the area. Signage's are made up of laser cut Anti-Corrosive high grade AISI 316 Stainless Steel of 2mm thick sheet with laser cut method for impression and with satin finish. Approx. Dimensions: 300 mm X 170 mm X 2 mm.Design and detailing provided by as per engineer in charge

SITC of Vitrified Flooring Fully vitrified, 8mm thick non-porous, homogenous, abrasion resistant, minimum size minimum 600 mm x 600 mm x 8mm of approved colour and shall be laid over concrete floor with laying compound strictly as per makes given. Total thickness of the flooring shall be 40mm thick including the thickness of the tiles, under bed. Tiles will be laid with 2mm gap using spacers and gap will be filled with black colour epoxy latictere..the rate shall include the work of flooring and skirting both.Detailed specifications and mode of execution is mentioned in technical Specification of RFP.

VRV AC System

Supply, Installation, testing & commissioning of Variable Refrigerant Flow modular type airconditioning system Inverter Controlled with stepless modulation complete with indoor & outdoor units, individual remote controller and centralized controller, interconnected refrigerant piping , full charge of refrigerant gas & oil, control cabling etc. as per detail given in specifications and having following items: (The prices to be given in Indian rupees on Full Import duty basis ) Refrigerant to be used shall be - R - 410 A.

Supply, Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having 100% hermetically sealed inverter type Scroll Compressor(s) with and minimum two compressors along with two Condensing fan, microprocessor based Controller, Side / top discharge type condensing unit(s), with R-410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The EER at 100% load with AHRI conditions shall not be less than 3.5 and Including OEM supplied Piping connection Kit etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per approved make.

56 HP Heat Pump Type (Cooling & Heating )

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down valve in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. (Make will be same as of Outdoor). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per approved make.

Ceiling Mounted Cassette Units:

Ceiling Mounted Cassette Unit : 2.56 TR / 865 CFM

Ceiling Mounted Cassette Unit : 3.18 TR / 1130 CFM

Ceiling Mounted Cassette Unit : 4.55 TR / 1254 CFM

Refrigerant Piping

Supply & Laying of interconnecting copper refrigerant pipe work with Y joints duly insulated with tubular elastomeric nitrile rubber insulation of thickness as specified, between indoor & outdoor units as per specifications. All piping inside the room shall be properly supported on galvenised perforated trays and all external piping shall run in galvenised covered perforated tray. MAKE: Copper Pipe -Madev / Maxflow/ Rajco. Insulation - Armaflex / Kflex / Aflex.

41.3 mm O.D. (insulation - 19 mm thick)

22.2 mm O.D. (insulation – 19 mm thick)

19.1 mm O.D. (insulation – 19 mm thick)

15.9 mm O.D. (insulation – 19 mm thick)

9.5 mm O.D. (insulation – 13 mm thick)

Drain Piping

Providing & Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping with fittings (IS:7834 & 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing, support with MS hanger on ceiling or recessed in wall with chasing & plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per approved make of RFP.

32 mm dia O.D with 9mm thick insulation

25 mm dia O.D with 6mm thick insulation

Transmission Cable

Providing & fixing shielded control cum transmission cable of 2 core x 1.5 sqmm copper in suitable 20 mm dia heavy duty PVC conduits or wall chase or refrigerant piping between indoor units and outdoor units and indoor units and wired controllers.

Supply, Fabricating & installing following sizes of GI cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders, fastners, supports etc. as required.

100mm x 50mm x 1.6mm

300mm x 50mm x 1.6mm

SITC of 2.0 mm thick (both base & cover) GI sheet raceway for copper piping from outdoor unit to shaft, The raceway shall be fixed on the floor with the help of suitable size galvanized MS angle support at 8" distance as approved from engineer incharge of size 250mm x 100mm.

Making hole in stone masonary/ RCC wall/ RCC slab with core cutter for accomodating refrigerant pipe/ drain pipe/ MS pipe/ cables etc of following dia

50 mm dia per running inch length

100 mm dia per running inch length

WIRING

Supplying and fixing of power plug point with Modular accessories as per specification for electrical Works, on hot dipped galvanized modular box of 18 SWG with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 3/5 pin 16 amp. socket outlet (IS:1293) , making connection , testing , etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

S&F following sizes (dia.) of ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit as per specification for electrical Works along with its accessories (IS: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. All relative and latest acceptance tests reports by any NABL accredited lab for the conduit shall be submitted before execution & All as per pre approved by Engineer in charge .as per recommended makes of RFP.

20 mm

25 mm

32 mm

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free ( 10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4, , in existing surface or recessed PVC/ MS conduit/casing capping including all as per pre approved by Engineer in charge,making connections, etc. as required. as per recommended makes of RFP.

3 x 1.5 sq. mm.

2 x 2.5 sq. mm. + 1x1.5sqmm

2 x 4.0 sq. mm. + 1 x 2.5 sq. mm.

4 x 10.0 sq. mm. + 1 x 6.0 sq. mm. (DB supply)

4 x 16.0 sq.mm +1x10.0 sq. mm(VTPN DB Supply)

Providing & Fixing of modular type lockable feature socket duly ISI marked (IS :1293) as per specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , minimum width of 1 module switch toggle (PUSH PART) should not less then 20mm, including all as per pre approved by Engineer in charge,making connections, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

16 A 3 pin shuttered socket

Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) as per specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , minimum width of 1 module switch toggle (PUSH PART) should not less then 20mm, including all as per pre approved by Engineer in charge,making connections, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

16 Amp. 1 Module switch

Providing & Fixing of following modular accessories as per specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , minimum width of 1 module switch toggle( PUSH PART ) should not less then 20mm, including all as per pre approved by Engineer in charge,making connections, testing etc. as required. All as per pre approved by Engineer in charge. as per recommended makes of RFP.

Blanking plate

Providing & Fixing of following size mounting grid plates with cover plates as per specification for electrical Works, made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

1/2 Module

3 Module

8 Module

Providing & Fixing of following size hot dip galvanized M.S. box of 18 SWG as per specification for electrical Works, with earthing terminal in recess/ surface suitable for modular accessories as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

1-2 Module

3 Module

8 Module

Supply and fixing following size of Hot dipped Galvanized (275 GSM) floor raceways / Under floor trunking with/ without partion, including with base and cover, junction boxes and floor outlet boxes as required, extension pieces, couplers, end plates, earthing including mechanically cutting chases in floor/ wall etc & making the same good with fixing alluminium profile cover . The race way shall be surface / Concealed type to brick wall / flooring with necessary fixing accessories .All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

75 mm x 25 mm x 1.5 mm

100 mm x 25 mm x 1.5 mm

DISTRIBUTION BOARDS

Providing & Fixing of 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C tripping characteristic as per type of load and site requirement) 4KV impulse withstand voltage, as per specification for electrical Works with ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , IP 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 A rating and 10,000 upto 63 A, 5000 for 80 A rating including making connections, testing etc. as required. . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

Single pole MCB

6 A to 32 A rating

Double pole MCB

6 A to 32 A rating

Triple pole MCB

40 A 63 A rating

Four pole MCB

40 A rating

50-63 A rating

Providing & Fixing of 240/415 V Residual current circuit breaker (RCCB) conforming to (IS:12640-1)/ IEC 61008 -1 , rated 4 KV impulse withstand voltage truly current operated and shall operate on CBCT mechanisum, provision for pad lock, min. operation 10,000 upto 63 A rating and 5000 for 100 A rating and minimum phase termination capacity of 35 sq.mm. rigid wire , IP 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Two pole 100/300mA sensitivity

40 A rating

Four pole 100/300 mA sensitivity

40 A rating

63 A rating

P&F Recessed/ Surface mounting heavy duty horizontal type prewired sheet steel Distribution board phophatised / powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, loose wire box, terminal block , duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks conforming to IS:13032 & IS:8623 including making internal DB terminations with copper lugs , testing etc. as required.

Metal door (Three phase) Per phase isolation, Horizontal IK-09 and IP-43 with Metal end box

6 Way(Incomer 8,Sub Incomer2+2+2)

8 Way(Incomer 8,Sub Incomer2+2+2)

P&F recessed/ surface mounting heavy duty Vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCCB and SP / TP MCB as outgoing , phophatised ,powder painted complete with insulated suitable rating copper bus bar , neutral link, earth link and din bar, masking sheet & conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.

Double door IP-43 & IK-09 with Provision of Incomer MCCB 100/ 125 A Rating with Metal end box

6 Way

100 Amp, FP, 25 KA, MCCB, having Thermal Magnetic trip unit with adjustable overload , short circuit & earth fault protection

Providing & Fixing of ISO certified company made vergin material PVC trunking system as per specification for electrical Works, with double lock feature for cable management including finishing accessories like corners, tee, adjustable angles, junction etc. as required . The trunking system shall have adaptable system for modular type RJ 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

80mm x 50mm

32mm x 20 mm

S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess on SMC insulator including riveting, soldering, saddles, making connection etc. as required.

8 SWG Cu wire

LAN Services:

DATA & TELEPHON WORK

Supply & Installation of IP-20 & IK-08 , UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with 'U'Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19" angles with wall mounting provision on wall. Accessories like: 1 No of 19" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

15 U Rack with Width 600 mm & Depth 400 mm + 100 mm

Supply, Installation, & Testing of 19" 1U Rack Mounted/ surface mounted aluminum/ CRCA 1.2mm powder coated, multimode glass Fiber Optic Cable Patch panel/LIU loaded with flangless/screwable adapters for ST/E-2000/SC/LC/MT-RJ/PC type, It should have easy removable Top plate with push buttons, there should be a splice tray installed in the Patch panel/LIU which can handle the fiber cores, splice tray should be PC+ABS material, it should include accessories like mounting hardware, gormetts, heat shrink tubes/sleevs, screws, nuts to install the panel for rack/wallmount applications as per requirement complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

Multi Mode LIU 6 Ports

Supply, Installation, & Testing of Indoor duplex Multimode patch cord (50/125 µm made of glass fiber optic with LSZH jacket, Multimode G652.D Mounted on both sides with ST/E-2000/SC/LC/MT-RJ/PC type Duplex connectors in acc. with IEC 61754-20 as per latest ammendments of TIA/EIA 569B.3, as per requirements complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

3 Mtr

Supply, Installation, OTDR Testing & Fusion Splicing of Fiber Multimode Pigtail (50/125 µm) made of glass fiber optic, should be fitted at one end with any one type of single ST/E-2000/SC/LC/MT-RJ/PC type connector in acc. with IEC 61754-20, as per latest ammendments of TIA/EIA 569 Standard Specification as per requirments complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

Supply, Drawing and Testing, of stranded Multi mode (50/125 µm) glass optic fiber cable, as per latest ammendments of TIA/EIA 568/ISO/IEC 11801:2011/ IEC 60794-1-2 E1, E3,E11, F1/ EN 50173-1/ EN 187 000/ IEC 60974-2, 2-20, 2-21/ ITU G.652D, construction of LSZH outer sheath cable, cable should be used for LAN and WAN back bones, . With its LSZH sheathing these cables should be ideal for indoor/outdoor installations in existing MS/PVC /HDPE Conduits/ slotted channels with ferruling at both ends for identification complete in all respect. All as per pre approved by Engineer in charge. as per recommended makes of RFP. (10 -G Cable)

6 core 10G glass optic fiber Cable)

Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6A patch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with FRPVC/LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectors as per ANSI/TIA/EIA 568 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568, minimum requirement for 1G BASE-T/ 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes, Minimum 750 to 1000 mating cycles in plug contacts for long durability complete in all respect. All as per pre approved by Engineer in charge. as per recommended makes of RFP.

Cat 6, UTP (Un-sheilded Twisted Pair) Patch Cord

1 Mtr

2 Mtr

Supply, Installation, Testing and Comissioning of Rack mounted 19" 1U, 24 Port Unloaded, 1.5-1.6 MM CRS chasis, powder coated, sheet steel, made of plastic (ABS), Modular Patch Panels (without I.O.) with Rear Cable management system and mounting hardware to mount the patch panel. Should have port identification numbers printed/engraved on front of the panel, . There should be a provision for each port/jack on the panel and reusable removable on field from the panel complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

Supply , Installation, Testing and Comissioning of Managed Layer-2 Intelligent 10/100 Ethernet Switch providing 24 x 10/100/1000 MBPS Giga Ethernet ports / with min 2 SFP Giga Ports (provision for Fiber Giga connectivity) with related LAN Base Software including making connections etc as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Supply, Installation, Testing and Comissioning of 1G SFP (small form-factor pluggable) transceivers as per recommended makes of RFP.

Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

Supply and Installation of unsheilded/ sheilded Information outlets made of high impact plastic body with ABS, FR Grade with provision for protection against dust in jack/ FP, suitable for Cat 6/6A application complying to latest ammendments, According. to Cat. 6/6A channel, It should support channel as well as components requirements of Cat.6/6A standards at frequencies of up to 250 to 500 Mhz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair, 23/24 AWG solid/stranded wire diameters, using 100 Ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact punch termination on reliable copper tin plated Insulation displacement contact, It complied with ANSI/TIA/EIA 568 standard. In existing modular/MS Boxes along with necessory connections as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

Cat 6, Un-sheilded Information Outlet

Supply & fixing of square Faceplate for Flush / Surface Mount Information Outlets Single/Dual or Quad Aperture , material should be PC+ABS body, Suitable for RJ45 unshielded/shielded connection modules. Should match with I. O. Dimensions should be 86mm X 86mm as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.

Single Aperture

Supply , Installation , Testing and commissioning of 86", 4K, Android 8.0, 4-core A73 × 2 + A53 × 2, 1.5 GHz, memory 3GB, build-in 32GB storage, build in Zoom, 20 points infrared touch contorl, industrial screen protection. Built-in Wi-Fi realizes wireless screen mirroring without any cable connection. Built-in interactive whiteboard system allows annotating and sharing. as per detail specifications and Preferred makes enclosed in rfp