Rajcomp Info Services Limited Tender

Interior Work

SITC of Modular rigid PVC metal panelling 1) Factory-made removable type self-inter-lockable metal panels with a front sheet of preformed textured hot-dip galvanized sheet with rigid polyvinylchloride (PVC) film on one side and on the other side a coating to avoid rust (sheet thickness 0.6mm). The panelling design shall comprise of a specially designed combination of perforated and non-perforated panels through CNC laser cutting, bending & punching. The panelling/partition shall be Greenguard gold certified/tested (from UL/Intertek). The necessary certificate / test report valid on the bid date and to be submitted at the time of drawing approvals. Panels shall be designed to achieve shape and design as per the design consultant and shall be fixed using GI/CRCA hook fitting on the structure. Overall system thickness for panelling shall be 60mm to 90mm and for partition shall be 70mm to 120mm. 2) Tiles Perforation – To achieve acoustics without deteriorating the aesthetical appeal of the office room interior it is necessary that the at-least twenty five percent of the wall panelling tiles have micro-perforations (less than 1.6mm dia. each) all over the surface with a density of 5000 holes per square feet. This feature shall be audit certified (from UL/Intertek) on modular wall panelling tile to have clean perforations and providing smooth finish on the front fascia of tiles. The tile shall have 5000 holes per square feet on the front side of the tile. The necessary certificate / test report valid on the bid date and to be submitted at the time of drawing approvals. 3) Seismic safety of user & equipment is a prime concern area. The metal panelling/partition shall sustain the seismic vibrations as per design spectrum IS 1893 for zone 2 vibrations. The test shall be carried out by an authorized government agency. The necessary certificate / test report valid on the bid date and to be submitted at the time of drawing approvals. 4) The wall panelling shall be robust & strong enough to sustain the routine loads/minor impacts of a typical office room environment. The wall panelling/partition structure shall have audit certified design feature (from UL / Intertek) of Load-bearing capacity of 300 Kgs to hold any display unit on clamp having a minimum length of 750mm. The necessary certificate / test report to be submitted at the time of drawing approvals. 5) Audit certified design feature (from UL / Intertek) of modular wall panelling tile having secure locking arrangement for equidistant mounting. Locking arrangement enables easy replacement without using any tool within 20 seconds. The feature shall provide easy flexibility of locking all tiles in one column through gravity. The necessary certificate / test report valid on the bid date and to be submitted at the time of drawing approvals. 6) The modular metal panelling shall comply to the lead-free directive to ensure restriction of hazardous substances so that the final product does not contaminate the environment. The final product i.e., modular metal panelling does not contain hazardous substances and we give a healthy life to our coming generations it is necessary that the modular metal panelling system shall be RoHS certified/tested (from UL / Intertek). The necessary certificate / test report valid on the bid date and to be submitted at the time of drawing approvals. 7) From fire safety point of view the metal wall panelling tiles shall be class A fire rated as per the norms of comparative measurements of surface flame spread and smoke density measurements with that of select grade red oak and fiber-cement board surfaces under the specific fire exposure conditions. The proposed wall panelling tiles shall be class A certified/tested as per ASTM e84 (from UL / Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. The necessary certificate / test report valid on the bid date and to be submitted at the time of drawing approvals. 8) To provide acoustically superior environment and ensure proper attenuation of airborne sound, it is necessary that the sound transmission class (STC) value of wall panelling and partition shall be minimum 35 (According to IS: 9901 (Part III) – 1981, DIN 52210 Part I- 1984, IS0: 16283 (Part I) -2014, necessary certificate / test report valid on the bid date and to be submitted at the time of drawing approvals. 9) The structure shall be made from a modular, heavy-duty powder-coated CRCA/GI frame (minimum sheet thickness 1mm) and shall allow an uninterrupted flow of wires/cable/tubes of maximum diameter 25mm.

SITC of Glass Door (Single) :- 12mm thick Frameless tempered clear glass With door spring and locking arrangements and both way handle and patch fittings. Detailed specifications and mode of execution is mentioned in technical Specification of RFP.