Rajcomp Info Services Limited Tender

Providing and laying Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate.

Providing & fixing 300mmx300mm & 6mm thick anti skid ceramic tile flooring of approved size and shade in 12mm thick CM 1:3, with cement slurry, pointing of tiles with Tile mate or equivalent to match the colour of the tiles, Proper slope to be maintained, curing ,oxalic acid wash etc., complete. no extra charge payable for cutting borders, cutting for drain holes etc.)

Providing and fixing Wall tiles of 300mmx450mm with vitrified tile on a backing plaster of CM 1:4 including slurry,12 mm thick including pointing with matching Cement grout , including acid washing, complete as per specifications and as per the sizes and pattern given by engineers. Rate to include cost of all materials and labour required for the finished job.

Providing and fixing Granite stone slab mirror polished and machine edge cut in pantry Counters, Floors etc. laid on 20mm thick kota stone/wooden pantry top with means of approved chemical adhesive including base preparation on Kota stone/Wood and silicon sealing of edges. Granite of approved shade and specification not less than 16mm thick of base rate up to Rs. 200/sqft.

Finishing of existing walls with new coat of putty in line and level by scrapping of old paint, making walls rough and adding two or more coats of putty as base surface for final finish as per design

Plumbing works for toilets/ pantry inlcuding Providing and fixing of W.C. pan (any type including WC cover,SS jali, health Facuets,cistern 10 liters etc all accessories), Urinals and wash hand basin/ SS sinks for pantry (double bowl with drain board) including pillar cock,angle valve,connection pipe,outlet pipe,ss jali of all sizes with care including all necessary fittings P or S trap. Cost to include if any repair of pipe work or new pipe to be installed in all manners. Toilets to be handed over in working conditions (men's toilet - 2 nos & Ladies toilet - 2 nos & officer's toilet -2 nos )

Providing and fixing of single bowl 304grade matt SS for Pantry area under counter sink with drain board, floor trap, long neck pillar cock counter mounted, PVC connection with angle valves, provision for R.O., geyser etc complete with all sanitary and Cp fittings as per sanitary & plumbing drawings attached complete with Fresh water supply lines/ Waste water pipe connection in working order.

Providing & laying flooring with skirting of up to 150mm of vitrified tile over a bed mortar of 20 mm thk in CM 1:5 or chemical laying as per the instruction of engineer in charge, including slurry, washing, cleaning etc tiles will be laid with 2 mm gap using spacers and gap will be filled with epoxy grouting of approved brand and shade, complete as per specifications. Necessary protective covering to prevent damage for the finish flooring to be given 300 microns plastic sheet and POP spread over it at no extra cost and to be retained until handover size:600*600. Mode of measurement LxB (floor area)

Providing and Laying Flooring works for cabins with Laminated wooden floor 12mm thick with V groove edge. To be installed with all necessary profiles like 100mm skirting, door profiles, corner profiles with base layer of foam and protective PVC base complete to be measured in plan area only.

Providing and fixing False Ceiling as per India Gypsum Specifications made of standard G.I. Sections and 12.5mm thick gyp board sheets inclusive of all hangers, edge members and other clips complete, with sheets fixed with proper screws by power drills and joints duly finished ensuring level in line and plumb to take final paint. All inclusive of detailed cut-outs for light fixtures, AC grilles. All Vertical drops will be measured extra as per actuals.The cost to be inclusive of surface preparation as per INDIA GUPSUM STANDARDS ( MODE OF MEASUREMENT L x B) .

Providing & fixing calcium silicate ceiling tiles of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized level clips spaced at 1200mm center to center along main‘T’ bottom exposed with 24mm of all T sections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawing and as directed by engineer-in-charge.8 mm thick

Providing & fixing Suspended baffle ceiling system with 150mmx25mm thk panels of 0.9mm sheet thickness, made in extruded aluminum finished in polyester based powder coat in specified shade, support structure in Matt black GI with 48mm baffle hanger attached to 20mmx30mm ‘U’ profile channel suspended by suspension clip to ceiling every 1200mmx1200mm centre. Baffles to have horizontal spacing of 100mm c/c and all open edges to have matching shade PVC End caps.

Providing and applying of acrylic emulsion paint finish to walls, blocked partitions, and plasterboard ceiling surfaces of approved shade, texture. Existing wall and ceiling surfaces to be prepared by scraping away any loose particles, dust, etc by washing and scrubbing and 1 coat of primer approved by manufacturer applied. The wall surfaces are then smoothened using putty approved by the manufacturers. Surfaces are then sandpapered to achieve a smooth finish and two or more coats of paint are applied as per manufacturer's specification.

Providing and applying Painting (two or more coats) on door and windows with synthetic enamel/Enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. Colour to be taken approval from engineer-in-charge

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @0.253 kg//sqm .This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints ,corners, junction with polymer mixed slurry.

Providing and laying Duco paint on mdf finished surfaces in selected shade and gloss level with NC protien base to give smooth finished surface.

PARTITIONS AND FIXED FURNITURE WORKS

Providing and fixing Wooden partitions with base structure in 75x75mm pine wood framing in a grid of 600mm x 600mm, pannelled with 12mm Boiling water resistant, anti-termite plywood and finished with 1mm laminate as per selection and pattern over 4mm HDF to create grooves as per design on both faces with all necessary provisions for wire movement, switch board installation and light fixing. Rate to include face preparation on both sides of partition.

Providing and fixing Wooden partitions with base structure in 75x75mm pine wood framing in a grid of 600mm x 600mm, pannelled with 12mm Boiling water resistant, anti-termite plywood and finished with 4mm MDF with base coat of oil primer to paste wallpaper (cost of wallpaper is seperate) and having bands of 12mm thick MDF 25mm wide duly duco painted complete as per design detail with all necessary provisions for wire movement, switch board installation and light fixing. Rate to include face preparation on both sides of partition.

Providing and fixing Full glass wall partitions made of 12mm Toughened glass with frame-less structure. Proper structure shall be made to ensure the fixing of glass from RCC slab above false ceiling and flooring. Straight and vertical structural members shall not be visible. custom printed Privacy film shall be applied on the glass as per design selected. All joints, edges and gaps to be sealed neatly with clear silcon not more than 4-5mm wide. NOTE: - The nature of installation should be replaceable, expandable and flexible to cater the future.

Providing & fixing in position Single/ double leaf framelass toughened glass door (single leaf size- 3'x7') using 12mm toughened glass with edge polish. The door to consist of floor spring , Top & Bottom patch fittings, Top pivot, lock, upto 400mm S.S handle etc complete fittings . Cost to include 12mm toughned fixed glass panel above lintel height with all necessary glass to glass / glass to wall SS fittings, silicon sealant in gaps and clear silicon door seal custom printed privacy film etc complete.

Providing & fixing Single leaf/ double leaf Flush shutter door with door frame 150mm*75mm and - 32mm th. door finished with laminate on both sides and glazed panel in between. Shutter to have 35mm wide and 12mm thick lipping beading allround finished with enamel paint of approved brand, colour and shade., Cost to include necessary hardwares door closer, hinges, handle lock etc., complete. Size 3.5'x7'.Details to be followed as per engineer in charge.

Repair work of existing Aluminium windows & Vents (glass & frame) including hinges, handles, frame, joints etc. Making windows in working condition and lockable, glass cleaning or change if broken. (lumpsum)

Providing and fixing CNC panel suspended ceilings made in cnc Cut 19mm MDF and suspended with clear wire and hanger screw to RCC ceiling at Height sepcified. The panel to be finsihed in Duco paint in specified shade as per design.

Providing and fixing CNC cut letters ranging in size from 200mm to 375mm, in 12mm MDF fixed to walls as per design and location to form wall quotes/ panels. Finished in duco paint with wall suspending hatrdware prefixed at the rear. Front Area to be measured for panel size.

Providing and fixing Wall cladding with custom printed venyl sheet pasted over 3mm Sunboard and laminated with matt finish protective clear film. To be mounted to wall with the help of silicon such that it appears snug fit and leaving no gaps on the side. Incase the maximum size exceeds the available size of venyl sheet, the print to be created in such a manner so that the joint is overlapped and not visible clearly. Rate to include purchase/ procurement of High resolution image from shutterstock or similar website.

Providing and fixing Partitions for conference room & TD room, Outer frame in base structure of pine wood grid 600x600mm C/C finished with 1mm laminate over 4mm HDF. Rest partition in fluted glass fixed to outer frame by means of wooden beading to make it possible to remove glass in future if required.

Providing Full wall or partial wall treatment with base in plywood/ pine wood framing as per desired depth/ thickness covered with BWR anti-termite 12mm/ 19mm plywood as per design and finished with 1mm laminate over 4mm MDF OR 12mm MDF with laser cut engraving etc complete as per design. Edges to be treated so as to match in design and having all necessary provisions for lighting and electrical wiring.

Providing Full wall or partial wall treatment with base in plywood/ pine wood framing as per desired depth/ thickness covered with BWR anti-termite 12mm/ 19mm plywood as per design and finished 4mm MDF and oil based primer for pasting of wallpaper (cost of wallpaper is seperate) having 25mm thk bands of 12mm mdf etc complete as per design. Edges to be treated so as to match in design and having all necessary provisions for lighting and electrical wiring.

Providing and fixing Beveled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers.it is to be installed as per size given by engineer in charge.

LOOSE FURNITURE AND WORKSTATIONS

Supply & installation workstations of size 1200(L) X 600(W) X 750(H) , made in 38mm blockboard for top rest in 19mm blockboard and 12mm plywood all Boiling water resitant & termite proof as per design and finished in laminate as per selection with all necessary hardware for KBPT, fixed type Drawer pedestal having one nos drawer and one nos shutter for shelf type storage both lockable. Each workstation to have total 1200mm high & 75mm thick partiton from floor having provision for wire manager, switch board and having Soft board on front facia as per fabric selection. Side deviders of workstations to be 150mm high from table top and finished with 1mm laminate. All edges of laminated top and partition to have groove by fixing the same over 4mm MDF on the edge and duly grouting the same to create a soft edge. Including Supply & installation of one 16 AMP modular switch & 3 no. 6/16 AMP modular universal sockets with one no. CAT-6 LAN socket and one nos USb charger socket as per recommended makes with end plates & mounting boxes. as per 3D view matching with Photographs as attached in RFP

Supply & installation Storage cupboards made in 19mm blockboard and 12mm plywood all Boiling water resitant & termite proof, finished in 1mm laminate over 4mm mdf, complete as per design between 900-1500mm high and 400 mm deep having a mix of shutter closed and open storage boxes with shelves at specified heights, having all nesessary hardware like autoclose hinges, handles and levelling pegs etc complete. Front facia to be measured

Supply & installation SA & ACP Cabin tables 1800x750mmx750mm. Made in 19mm blockboard and 12mm plywood all Boiling water resitant & termite proof as per design and finished in laminate with front panel as per detail with all necessary hardware and fittings like KBPT, Fixed type drawer pedestal having one nos drawer and one shutter with shelf with all locks and fittings. Table to have provision for wire manager. Including Supply & installation of one 16 AMP modular switch & 3 no. 6/16 AMP modular universal sockets with one no. CAT-6 LAN socket & USB charger as per recommended makes with end plates & mounting boxes. including supply & provision of connector for Laptop connectivity. as per 3D view matching with Photographs as attached in RFP

Supply & installation Director tables 2400x900mmx750mm. Made in 19mm blockboard and 12mm plywood all Boiling water resitant & termite proof as per design and finished in laminate with front panel as per detail with all necessary hardware and fittings like KBPT, Fixed type drawer pedestal having one nos drawer and one shutter with shelf with all locks and fittings. Table to have provision for wire manager. Rate to include rear book shelf cabinet (1800x400x2100mm) with solid shutter uptill 750mm height and glass shutters uptill 2100mm height. Including Supply & installation of one 16 AMP modular switch & 3 no. 6/16 AMP modular universal sockets with one no. CAT-6 LAN socket & one nos USb charger socket as per recommended makes with end plates & mounting boxes. including supply & provision of connector for Laptop connectivity. as per 3D view matching with Photographs as attached in RFP

Supply & installation Modular type Conference table as per design with MS powder coated legs and Boiling water resitant & termite proof 19mm blockboard top and 300mm high 12mm plywood front facia. All finished in 1mm laminate over 4mm mdf complete as per design with provision for cable manager for AV wires and mike/ speaker setup. Including Supply & installation of one 16 AMP modular switch & 3 no. 6/16 AMP modular universal sockets with one no. CAT-6 LAN socket & one nos USB charger socket as per recommended makes with end plates & mounting boxes. including supply & provision of connector for Laptop connectivity. as per 3D view matching with Photographs as attached in RFP

Supply & installation Reception counter as per design of size 1800x600x900mm . Made in 19mm blockboard and 12mm plywood all Boiling water resitant & termite proof, finished with 1mm laminate over 4mm mdf wherever specified. Including Supply & installation of one 16 AMP modular switch & 3 no. 6/16 AMP modular universal sockets with one no. CAT-6 LAN socket & one nos USB charger socket, wire manager as per recommended makes with end plates & mounting boxes. including supply & provision of connector for Laptop connectivity. as per 3D view matching with Photographs as attached in RFP

Supply & Installation of 3 Seater Sofa The seat should be made of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of J PU foam with Density 28 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of super soft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure: should be made up of 1.2±0.1 cm. thick hot pressed plywood . Dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose .it should be a welded assembly made in Stainless steel (grade SS 202) tube & plate. as per 3D view matching with Photographs as attached in RFP

Supply & Installation of 1 Seater Sofa The seat should be made of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of J PU foam with Density 28 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of super soft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure: should be made up of 1.2±0.1 cm. thick hot pressed plywood 4. Dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose .it should be a welded assembly made in Stainless steel (grade SS 202) tube & plate. as per 3D view matching with Photographs as attached in RFP

Supply & installation The centre table of size 1050x600x450 shall have legs in Brushed Or anodized SS 304 Grade and Top in either 10mm toughned glass or High gloss PU paint over wooden/SS base as per design detail.

Supply & installation Modular storage works for pantry and store areas as per design. Base structure for carcass and shutters/ drawers made in Boiling water proof & termite proof plywood and blockboard and finished with 1mm laminate. Rate to include internal shelves/ partitions/ 304 grade SS mongeries/ Hardware like drawer channels/ Autoclose hinges complete as per design drawing attached in RFP. Front facia to be measured

Supply & installation of Manual Roller blinds having Aluminum Roller tube along with fabric pasted on it with glue having control unit for manual operations and bottom bar Aluminum powder coated for weight purpose, including fabric, fitting & accessories of approved make & colour etc. complete.

Providing and fixing of fabric based wallpaper of approved shade and brand not less than 220 GSM on specified areas wherever mentioned by means of suitable adhesive. Air gaps and wrinkles to be taken care of with proper alignment. Cost to include necessary scaffolding if required. Mode of measurement LengthxBreadth (application area).

Providing and fixing of Logo in reception made up of laser cut 2+2mm acrylic sheet size 1mtr by 1mtr .details given by engineer in charge. Cost to include graphical drafting on suitable software supported by CNC machine.

Providing and fixing Name plate for individual cabin and rest of the area. Signage's are made up of laser cut acrylic sheet of 2mm thick sheet with laser cut method for impression. Approx. Dimensions: 300 mm X 170 mm X 2 mm.Design and detailing provided by as per engineer in charge. Cost to include graphical drafting on suitable software supported by CNC machine.

The planters shall be a double wall type construction in 304 grade SS with electroplating in desired shade. The sizes shall vary from between 400mmx400mm conical round to 750mmx450x450mm conical round.

SITC of Chair (Director's Chair) High Back with Cushioned Backrest, Synchronized Mechanism, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong Nylon Base. Seat: PU, Backrest – PU, Detailed specifications and mode of execution is mentioned in technical Specification of RFP.

SITC of Chair ( Officers and Reception) Medium Back, Mesh Back, Silver Epoxy Backbone, Synchronized Mechanism,Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong nylon Base, Seat - Fabric and mesh backrest, Detailed specifications and mode of execution is mentioned in technical Specification of RFP.

SITC of Chair (Visitor's chair) (Staff room chairs) (Without Wheels) Low back visitor model ABS for seat, Mesh back with extra lumber Support with fine tuning for depth adjustment, with fixed armrest, silver epoxy cantilever base Upholstery: Black Fabric Seat & mesh backrest.Detailed specifications and mode of execution is mentioned in technical Specification of RFP.

SITC of Chair (Workstation Chair) Medium Back, Mesh Back, Silver Epoxy Backbone, Synchronized Mechanism,Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong nylon Base, Seat - Fabric and mesh backrest, Detailed specifications and mode of execution is mentioned in technical Specification of RFP.

SITC of Chair (Conference Room Chair) Medium Back, Mesh Back, Silver Epoxy Backbone, Synchronized Mechanism,Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong nylon Base, Seat - Fabric and mesh backrest, Detailed specifications and mode of execution is mentioned in technical Specification of RFP.

Architechtural and MEP cunsultant charges for submission of working drawings as per BOQ of CVIL, MEP and conceptual drawings enclosed in RFP.