Rajasthan Urban Infrastructure Development Program Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 14,00,000Document Cost
₹ 10,000Tender Fee
₹ 2,500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_RUIDP_395761_1Bid Award Id
ViewTender No
RSTDSP/MTB/CTYBF/01Tender Authority
Rajasthan Urban Infrastructure Development Program ViewPurchaser Address
-Website
http://http://urbanslbruidp.rajasthan.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer. Cement Concrete Grade M-15 and above and PCC blocks
223
-
-
... More
Dismanetaling Dry rubble masonry
30
-
-
... More
Dismantling kerb stone by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 metre as per MoRT&H specification clause 202.
40
-
-
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-incharge. In Cement Mortar
1
-
-
... More
Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 metres lead including refilling the excavated gap.
5
-
-
... More
Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.
876
-
-
... More
Filling with locally available river sand at all levels including watering ramming consolidating and dressing complete including cost of sand
592
-
-
... More
Earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m.
358
-
-
... More
Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibrator including curing complete as per clause 2100 of MoRT&H specification including all scaffolding, material, labour, machinery.
1422
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). (As per design mix)
6
-
-
... More
Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete.
24
-
-
... More
Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.
389
-
-
... More
Precast RCC Beams :Providing, precasting, transportation and placing in position at all level precast pre/post-tensioned specified grade girders as per drawing and clause 1800 & 2300 of MoRT&H specifications (excluding cost of reinforcement, HTS strands and pre-stressing) including all material, labour, machinery (suitable crane).
RCC M-45
29
-
-
... More
Providing and laying Precast Reinforced cement concrete slab for footpath and median with approved finish, constructed with specified grade concrete as per dimensions in the approved drawing and at locations directed by the Engineer including form work and excluding reinforcement and complete as per clause 1500 & 1700 of MoRT&H specification including all material, labour, machinery. including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar. RCC M-30
15
-
-
... More
Precast RCC railing : Construction of precast/ cast-in-situ RCC railing M-30 grade, true to line and grade, center to center spacing between vertical post not to exceed 2000mm leaving adequate space between vertical post for expansion, complete as per drawing and technical specification and as per clause 1500, 1600, 1700 & 2703 of MoRT&H Specification including all material, labour, machinery etc.
20
-
-
... More
Providing and laying expansion joint complete as per drawing and technical specification and as per clause 2605 of MoRT&H Specification including all material, labour, machinery etc
Filler joint with 20m thick compressible fibre board.
29
-
-
... More
Brick work with machine moulded perforated bricks of class designation 125 conforming to IS: 2222 -1991 in superstructure above plinth level upto two stories in cement mortar 1:6 (1 cement : 6 coarse sand) : With FPS bricks.
448
-
-
... More
Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories. Cement mortar 1:3 (1 cement :3 coarse sand)
82
-
-
... More
Random rubble masonry with hard stone in foundation and plinth : Cement mortar 1:6 (1 cement : 6 coarse sand)
186
-
-
... More
Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge.
8353
-
-
... More
Interlocking paver block : Providing and fixing of 60mm thick precast cement concrete interlocking paver block casted with rubber moulds in approved reflective colour and design having minimun compressive strength of 300 kg/ sq cm. The CC paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications.
324
-
-
... More
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. red sand stone
2063
-
-
... More
Kerb stone : Providing and laying structural Reinforced cement concrete (design mix) of specified grade using mechanical concrete mixer and vibrator in approach slab, friction slab, edge beam, footpath and kerb as per approved drawing and specification as directed by the Engineer as per clause 1500 &1700 of MoRT&H specification including all scaffolding, material, labour, machinery etc. including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar. RCC M-30
88
-
-
... More
thermoplastic paint : Providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.
159
-
-
... More
Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar mix : 1:3 (1 cement : 3 fine/ coarse sand)
3742
-
-
... More
Exterior textured paint : Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
5080
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
300
-
-
... More
Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture
15
-
-
... More
Granite : Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Green / Black Upto to 1500 Cm2 Tiles
1118
-
-
... More
GI mesh with post & foundation : Supplying and fixing of GI chain link fencing of required width in mesh including strengthening with 2 mm dia GI wire/ G.I. staples/ G.I.U-nails/ nuts bolts with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete 30cmx30cmx60cm, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only etc complete as required and as per direction of Engineer-in-charge. Mesh size 50mm x 50mm made of GI wire 3.15mm dia
80
-
-
... More
GSB : Providing, laying, spreading and compacting of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per MoRT&H specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. Grading - I Material
74
-
-
... More
WMM : Providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (WMM) base course comprising of graded stone aggregate and granular material conforming to MORT&H specifications (Table 400-II) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per MoRT&H specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion.
74
-
-
... More
Premix carpet : Providing and laying open graded premix carpet 20mm thick (compacted), on prepared surface in a single course as wearing course, composed of specified graded crushed stone aggregate as per Table 500-23, premixed with bituminous binder @ 14.60 kg/ 10sqm (including Cost of anti stripping compound Minimum 1% in Lime/Cement as per design wherever required), including loading of material with F.E. loader, hot mixing of stone aggregate and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control to the required level and grade, compacting smooth wheeled roller 8-10 tonne capacity and finishing to required level to achieve the desired density as per clause 511 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding cost of tack coat/ seal coat. With Bitumen VG-grade 30
744
-
-
... More
Seal Coat : Providing and applying liquid seal coat type "A" comprising of a layer of bituminous binder @ 9.8 kg/ 10 Sqm (including Cost of anti stripping compound Minimum 1% in Lime/Cement as per design wherever required) followed by a cover of stone chipping @ 0.09 cum/10 sqm of specified grading and rolling with power roller 8-10 tonne complete as per clause 513 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. With Bitumen VG-grade 30
744
-
-
... More
U-Drain : Providing and fixing precast dense cement concrete M-20 Grade(Vibro-pressed) drain section block of different size as per approved drawing, design and strength as per IS:2185 (part I) of grade 'D' (5.00 N/mm2) proper quality of additive/admixture like plasticizer etc. added to produce high quality and durable drain section Blocks of 'L' shape 'U' shape etc. over 50mm thick CC M15 base course with fixing and joining with C.M.1:4 in proper grade and level complete in all respect. (cost of earth work, steel & welded mesh shall be paid extra).
80 mm thick
223
-
-
... More
150mm RCC pipe : Providing and Laying Reinforced cement concrete pipe NP4/ prestrssed concrete pipe for culverts including jointing ends and fixing collar with cement mortar 1:2 complete as per clause 1000 & 2900 of MoRT&H specification including all material, labour form work, machinery. 150 mm internal diameter
558
-
-
... More
Cutting road (Bitumin) and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. bituminous portion
688
-
-
... More
Cutting road (WBM) and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. Water bound macadam
1036
-
-
... More
Wooden flooring 25mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with : Second class teak wood
110
-
-
... More
Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer.
Dismanetaling Stone pitching/ dry stone spells.
15
-
-
... More
Filling of Pot- holes and patch repairs with Built up Spray Grout in two layers with 53-22.4mm size of aggregate upto 75mm depth and removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 506, compacting with 8-10 tonne power roller, trimming and finishing the surface to form a smooth continuous surface complete using Bitumen VG-grade 30 as per clause 503, 506 & 3004.2 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.
1175
-
-
... More
Precast Concrete : Providing and fixing upto two stories precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
47
-
-
... More
PART:B - CIVIL WORK NSOR ITEMS
-
-
-
... More
Granite stone Seater : Supply and fixing Seater size 1.8 X 0.45 x 0.45 meter height made of the following specifications, including with RCC, PCC, Excavation, Granite, filling etc complete, do as per drawing and as per direction in engineer in charge.
80
-
-
... More
Seating Module 4 : Supply and fixing planter seating size 2.65 X 1.8 x 0.6 meter made of the following specifications, including with PCC base, Brick work, Excavation, Granite top, MS box section as oer drawing, fininshing with washed stone grit plaster with groove etc complete, do as per drawing and as per direction in engineer in charge.
11
-
-
... More
Signage E : Supply and fixing signage 1.5 X 2.5 meter height made of the following specifications : Signage of A.C.P / transparent PVC acrylic sheet 3 mm thick fixed on MS hollow rectangular section size 50mmx25mm, letters made of acrylic material sheet 3 mm thick of any colour or printed on sheet fixed with LED lights with all accessories and wiring with copper wire complete. 2.5 x 0.2 m M25 RCC columns with footing, M15 garde base PCC, excavation of 1m depth. 25mm thick Selected Stone cladding in pattern as per drawing and as per direction in engineer in charge.
14
-
-
... More
Pergola : Providing and making in postion Stone pergola of as per drawing in plan with columns at 3m c/c along length, top wooden planking of teak wood on the framing of MS box section of symmetrical size at 200mm c/c selected type of stone cladding on all exposed surface with adhesive or cement mortar or clamping matching color pigment, and all necessary fixtures and fastners required as per drawing and instruction given by engineer in charge. Mode of measurement-Plinth area in Smt shall be considered for payment.
189
-
-
... More
Creeper frame :Supply and fixing creeper frame of 2.5mt ht x 5 m length made of the following specifications including Excavarion, PCC, RCC, filling , wood work, and steel structure work- MS fabrication work etc complete. do as per drawing and as per direction in engineer in charge.
11
-
-
... More
Seating Module 1 : Supply and fixing planter seating size 2 X 1.2 x 0.85 meter height made of the following specifications, including with PCC base, Excavation, Granite, filling grade soil, planting shrubs, fininshing with washed stone grit plaster with groove etc complete, do as per drawing and as per direction in engineer in charge.
30
-
-
... More
Seating Module 2 : Supply and fixing planter seating size 5 X 1.0 x 0.6 meter height made of the following specifications, including with PCC base, Excavation, Granite, filling grade soil, planting shrubs, fininshing with washed stone grit plaster with groove etc complete, do as per drawing and as per direction in engineer in charge.
5
-
-
... More
Signage B : Supply and fixing sign board 4.0 X 1.5 meter height made of the following specifications board base of A.C.P / transparent PVC acrylic sheet 3 mm thick fixed on MS hollow rectangular section size 50mmx25mm, letters made of acrylic material sheet 3 mm thick of any colour fixed with LED lights with all accessories and wiring with copper wire complete including 1.8 x 0.6 x 0.6 m base rubbble masonary 0.6m above ground and 0.5m below ground with pointing, 1.8 x 0.6 x 0.15 m grade M15 base PCC, excavation of 0.6m depth and 150m thick coping on top. sign board will be fixed on MS fabrication work with synthetic enamal paint in pattern as per drawing and as per direction in engineer in charge.
1
-
-
... More
Signage F : Supply and fixing signage 1.5 X 2.5 meter height made of the following specifications : Signage of A.C.P / transparent PVC acrylic sheet 3 mm thick fixed on MS hollow rectangular section size 50mmx25mm, letters made of acrylic material sheet 3 mm thick of any colour or printed on sheet fixed with LED lights with all accessories and wiring with copper wire complete. 2.5 x 0.2 x 0.2 m M25 RCC columns with footing, 1.5 x 0.6 x 0.6 base Brick masonary with 0.6m above ground and 0.3m below ground. 1.5 x 0.6 x 0.15 m grade M15 base PCC, excavation of 1m depth. Selected 25mm thick Stone cladding in pattern as per drawing and as per direction in engineer in charge.
15
-
-
... More
Granite stone Seater : Supply and fixing Seater size 1.8 X 0.45 x 0.45 meter height made of the following specifications, including with RCC, PCC, Excavation, Granite, filling etc complete, do as per drawing and as per direction in engineer in charge.
37
-
-
... More
Seating Module 3 : Supply and fixing stepped seating size 5 X 1.0 x 0.6 meter height made of the following specifications, including with PCC base, Excavation, Granite, filling grade soil, planting shrubs, fininshing with washed stone grit plaster with groove etc complete, do as per drawing and as per direction in engineer in charge.
4
-
-
... More
Signage A : Supply and fixing signage 1.5 X 2.25 meter height made of the following specifications : Signage of A.C.P / transparent PVC acrylic sheet 3 mm thick fixed on MS hollow rectangular section size 50mmx25mm, letters made of acrylic material sheet 3 mm thick of any colour or printed on sheet fixed with LED lights with all accessories and wiring with copper wire complete. 1.5 x 0.6 x 0.6 m base rubbble masonary with 0.6m above ground and 0.5m below ground with 25mm selected stone cladding. M15 grade base PCC, excavation of 0.6m depth. Selected Stone craved jali fixed on top and bottom of signage top and bottom in pattern as per drawing and as per direction in engineer in charge.
4
-
-
... More
Signage B : Supply and fixing sign board 4.0 X 1.5 meter height made of the following specifications board base of A.C.P / transparent PVC acrylic sheet 3 mm thick fixed on MS hollow rectangular section size 50mmx25mm, letters made of acrylic material sheet 3 mm thick of any colour fixed with LED lights with all accessories and wiring with copper wire complete including 1.8 x 0.6 x 0.6 m base rubbble masonary 0.6m above ground and 0.5m below ground with pointing, 1.8 x 0.6 x 0.15 m grade M15 base PCC, excavation of 0.6m depth and 150m thick coping on top. sign board will be fixed on MS fabrication work with synthetic enamal paint in pattern as per drawing and as per direction in engineer in charge.
3
-
-
... More
Convex Mirror : Supply and fixing of imported Outdoor Polycarbonate Convex Mirror with 130 Degree + actual viewing angle, equipped with adjusting swivel and mounting bracket for infinite adjustment. Diameter – 100 cm outdoor, fixed on 0.5 m dia x 1.0 m depth M25 RCC pedestal, and 100 x 100 mm MS pole with paint as per MORTH specification and standards.
4
-
-
... More
90 liter dustbin with 2 wheels : 90 litre capacity plastic bins HDPE made from virgin polymer material having thickness of 2.5mm on 2 heavy duty 175 mm dia. wheels with foot operated lid having metal pedal and rod along with HDPE handle for lifting matching standard of IS 3730: 1988. Bin shall be rectangle, square or circular shall in yellow, green, blue and red colourand the shape and aesthetics as per selection of the architect / EIC. All the work shall be done as per instruction given by EIC and as per Approved tender make list with all relevant IS codes.
67
-
-
... More
120 liter dustbin with 2 wheels : 120 litre capacity plastic bins HDPE made from virgin polymer material having thickness of minimum 2.5mm on 2 heavy duty 200 mm dia. rubber wheels with foot operated lid having metal pedal and rod along with HDPE handle for lifting matching standard of IS 3730: 1988. Bin shall be rectangle, square or circular shall in yellow, green, blue and red colourand the shape and aesthetics as per selection of the architect / EIC. All the work shall be done as per instruction given by EIC and as per Approved tender make list with all relevant IS codes.
15
-
-
... More
Providing & Fixing Dustbins of 40 Liter Capacity in existing with MS pipe frames
24
-
-
... More
Stone railing : Providing and fixing in position Nimabheda stone railing of 0.3m height and 100mm dia stone pillers at every 1.0 m, thickness of stone jali will be 50mm finished on both side as per drawing
844
-
-
... More
Hydraulic Bollard : Supply, Installation, Testing and Commissioning of Hydraulic Retractable Crash Rated Bollards as per following parameters with RCC base as per manufacturers standarads : Drive Unit Hydraulic - (S4-H), Pneumatic (S4-P) Protection Class-IP 66-68 (IP Enclosure customisable according to the requirement) Rating -K4/IWA 14-12013 Bollard V/7200 [N2A] 48/90/0.1 (6.8 Ton Truck Impacted At 48 Km) Hydraulic Drive Unit -420 V (Ac), 50 Hz Cylinder Material -High Tensile Carbon Steel Cylinder Diameter -223mm Rising Lowering Time (Normal) -3 sec
9
-
-
... More
Tesile Structure with Steel : Structural Steel : Supplying, Providing, Fabricating, Assembling, hoisting, erecting and placing in position MS Built-up section/Tubular Structure ( MS built-up section :-Rolled section & plates confirming to IS 2062 Grade Yst 350 MPA,Tubular Structure:- made from Steel hollow sections, ISI marked from SAIL / TATA/JINDAL or Equivalent Grade conforming to IS 1161/4923/1239, Minimum Yst 240 MPA ) in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections etc. including Preparation of detailed fabrication and erection drawings of Structural steel work from design drawings, Tansportation from fabrication yard, cutting, threading, machining, leads and lifts upto all heights, tools and plants and necessary scaffolding etc. Required for all operations involved to make structure of Tensile Membrane shade. The structure has to be provided as per conceptual drawings of Tensile fabric profile , including all arch beam, curved lateral beams and bracings, vertical support columns, nodal joints. The complete structure to be with one coat of epoxy zinc primer and two coats of Polyurethane paint RAL 9010 on steel work at all locations prepared by Surface Preparation shot blast clean to Sa 2.5 as per ISO 850 1.1/BS/7079: A1 with the range 50-75 & required minimum 310 micron DFT (dry film thickness) for each coat as specified in particular specification. Tensile fabric: Providing, fabricating, assembling and erection of prestressed Tensile Membrane Fabric structure in desired profile including fabric designing and seaming as per conceptual drawing. The fabric structure should be Mehler / Sattler or equivalent grade conforming max tensile strength warp/weft 6000 / 5500. This work shall include raw material, patterning, forming, cutting, welding, fixing and installation with GI cables, flashing, hot dipped galvanized e Corner Plates and hardware with EN8 grade 8.8 - HDG etc. including lifts up to all heights, tools and plants, and necessary scaffolding etc. required for all operations.(Note: Plan area to be measured for payment purpose)
75
-
-
... More
Stone railing : Providing and fixing in position Nimabheda stone railing of 0.6m height and 100mm dia stone pillers at every 1.0 m, thickness of stone jali will be 50mm finished on both side as per drawing
1500
-
-
... More
PART:C - HORTICULTURE WORK SOR ITEMS
-
-
-
... More
Hedge : Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart.
160
-
-
... More
Ground Cover Plants : Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 300 mm min. height ground covers at site in 0.3 m dia holes, 0.3 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. Wedelia trilobata ( SunFlower Family)
153
-
-
... More
Alternathera green (Parrot Leaf)
70
-
-
... More
Shurbs : Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 600 mm min. height shurbs at site in 0.45 m dia holes, 0.45 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. Rhaphis excelsa with 3-4 suckers ( Lady Palm)
100
-
-
... More
Phonenix sylvertris ( Date Palm)
69
-
-
... More
Supply and planting following species best quality container grown healthy trees of 2 mt. min. height, well established & free from disease at site in 0.90 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. Plumeria alba ( Champa)
30
-
-
... More
Gulmohar(Delonix regia)
33
-
-
... More
Bauhinia blakeana (Arckid)
20
-
-
... More
Quis quallis indica ( Madhu Malti)
20
-
-
... More
Vernonium ( Parda Bel)
61
-
-
... More
Bougain villea
86
-
-
... More
Soil for garden : Supplying and stacking good earth at site of work. Note: 1) Loading, unloading and carriage to be paid extra as per actual lead. 2) Earth measured in stacks will be reduced by 20% foe payment + Supplying and stacking of well decayed cow dung manure at site. Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge, farm- yard manure or/and good earth to be paid for separately). +
254
-
-
... More
Lawn : Grassing with 'Carpet' grass (selection no. 1) including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed.(The good earth shall be paid separately) With grass Turf
1486
-
-
... More
Part D- Electrical Works
-
-
-
... More
Supply and erection of Galvanized Iron pole with galvanizing done in single dipping (Average coating thickness Minimum 65 Microns) continuously tapered poles having Octagonal / Circular cross-sections designed to withstand the maximum wind speed as per IS 875, The pole shaft shall be made from sheet steel (HT Steel Conforming to grade S355JO) and confirming to BSEN 10025 and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process. pole shafts shall be provided with the rigid flange plate of suitable thickness (Fe 410 conforming to IS 226 / IS 2062) with provision for fixing 4 no. foundation bolts, This base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside.The octagonal Poles shall have lockable door of approximate 500 mm length at the elevation of 500 mm from the Base plate with bakelite sheet having 6A SP MCB and 16 sqmm stud type connector ( 4 nos) inside the pole at door opening for cable connection of following length and dimension as per table P-01 with base plate and foundation bolt on the Existing cement concrete foundation.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
Poles with Octagonal Cross Section
-
-
-
... More
4.0 Mtr
186
-
-
... More
6.0 Mtr
46
-
-
... More
Providing & Fixing of IK07 IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum LM6/ ADC12 material with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover (UV stablzation report submitted for UV cover ) and secondary lens on each LED & should be SMD type . The System level Luminaire efficacy =120 lm/ wt with High Power LEDs is to be used and potted driver must be potted & has a unique BIS number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @=300 V AC and Auto resetting Safety ,Input Frequency 50Hz±3% Power Factor 0.95 driver Efficiency 85% ,THD(I) 10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current 1000mA shown in LM79 report. The luminaire shall be BIS certified and T.C. certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened, color Rendering Index 70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Compliant. All as per pre approved by Engineer in-charge.
-
-
-
... More
LED Street Light fixture 30 Watt
46
-
-
... More
Supply installation testing & Commissioning of high mast lighting system (as per PLG 07 of ILP UK techinical report no 7 of ILE UK /IS:875 Part-1 – 2015//BSEN10025/and IS:2062 )consisting of totally hot dip galvanised by piecewise single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries with welded arm (excluding luminares), mast head frame assembly with full cover, including 1 No. LED 15 Watts aviation obstruction lights, double drum type self sustaining winch, integral power tool accesible from door with padlocking arrangement (winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, Stainless steel 6 mm dia. wire ropes (AISI 316, 7 / 19 costruction 3 no. rope for lantern carrage & 2 no. rope for winch assembly ) foundation bolt, torque limiter,EPR insulated PCP sheathed 5 core x 2.5 Sq.mm trailing cable, including outdoor type control panel for auto on / off, reverse / forward motor operation. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135.etc. as required on Existing Foundation. ( See table P - 03 for specs.) OEM Must have Type test certificate for wind tunnel test . All as per pre approved by Engineer in-charge. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
16.0 Mtr HM (in 2 section) suitable for 9 No. Luminaries
1
-
-
... More
Supply and Fixing of Pole OEM fabricated hot dipped galvanised M.S. Overhang (48.3 X 3.25 mm) with cap (400 x 88.9 / 114.3 x 3.25 mm) over the existing poles. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
Single arm overhang
46
-
-
... More
Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps . Integrated driver must be potted & has a unique BIS number shall be high efficiency having efficiency more than 85 % and in compliance to BIS certified and T.C. certificate. The System level Luminaire efficacy =120 lm/ wt with High Power LEDs is to be used . LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @=300 V AC and Auto resetting Safety . Input Frequency 50Hz±3%, Power Factor 0.95 ,driver Efficiency 85% , THD(I) 10% , driver current 1000mA shown in LM79 report. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector Must be provided, Surge Protection Min =4KV internal and 10KV external, System life of 30000 Burning hours with 70% of Initial Lumens maintained, color Rendering Index 70 and CCT 5700K ±355K. Driver current 1000mA shown in LM79 report. Fixture shall be IS 10322 Compliant. All as per pre approved by Engineer in-charge.
-
-
-
... More
High Power LED Flood Light 30W
10
-
-
... More
Providing & Fixing of IK10 IP65 protected 600 mm height LED Bollard Luminarie with base plate made of powder coated die cast alluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy ≥ 90 Lumen/W. SMD LEDs is to be used, System CRI70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency 85%, PF0.9, THD20% and input Voltage range of 90-270V AC at 50Hz. System life of 30000 Burning hours with 70% of Initial Lumens maintained Light output in Cool white or Warm White Colour as per engineers choice. driver current 750mA. Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
Minimum lumen output 980 lm Bollard
123
-
-
... More
Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in-charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
-
-
-
... More
Single pole MCB (With B/C curve tripping Characteristics)
-
-
-
... More
6 A to 32 A rating
68
-
-
... More
Double pole MCB(With B/C curve tripping Characteristics)
-
-
-
... More
50-63 A rating
15
-
-
... More
Providing & Fixing of 240/415 V Residual current circuit breaker (RCCB) conforming to (IS:12640-1)/ IEC 61008 -1 , rated 4 KV impulse withstand voltage truly current operated and shall operate on CBCT mechanisum, provision for pad lock, min. operation 10,000 upto 63 A rating and 5000 for 100 A rating and minimum phase termination capacity of 35 sq.mm. rigid wire , IP 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in-charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
-
-
-
... More
Two pole 30 mA sensitivity
-
-
-
... More
16/25 A rating
11
-
-
... More
Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
-
-
-
... More
Glazed door (single phase) IK-09 and IP-43 with Metal end box
-
-
-
... More
12 Way (12+2)
11
-
-
... More
Switch Socket
-
-
-
... More
Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) with CM/L no. printed and made out of unbreakable and fire retardant vergin UV Stabilized Polycarbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating ,minimum width of switch toggle( PUSH PART ) should not less then 20mm, including all as per pre approved by Engineer in-charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
-
-
-
... More
16 Amp. 1 Module switch With Led Indicator
23
-
-
... More
Providing & Fixing of following size mounting grid plates with cover plates made from fire retardent UV established high-performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
3 Module
22
-
-
... More
Providing & Fixing of Wiring Accessories OEM fabricated following size GI box of 1.2 mm thick with earthing terminal and adjustable floating clamp in recess/ surface suitable for modular accessories as required.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
3 Module
57
-
-
... More
Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed
Armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of
1.1 KV with electrolytic grade Copper made of copper rods
confirming to IS 613-1964, of purity 99.7 %, round / flat strip
armouring, Inner / outer sheath confirming to IS:5831 in existing
RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench /
Cable tray(with cable tie) including testing etc. as required of
following size. OEM must have it's own in house NABL accrediated
Laboratory for testing procedure as per IS:10810 For additional
technical parameters of product / work refer Annexure 'A' attached
with this BSR
-
-
-
... More
10.0 sqmm x 4 core
4840
-
-
... More
2.5 Sq. mm x 2 core
2260
-
-
... More
4.0 Sq. mm x 2 core
226
-
-
... More
Hume Pipe & Cover
-
-
-
... More
Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade & PN-6 for potable water as per IS 4984 (amended upto date) in trenches complete with all accessories like Bend, Tee, Reducer, Stub end, End cap etc including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. Note : E/w to be measured and paid separately.
-
-
-
... More
75 mm dia
4840
-
-
... More
Construction of brick masonry valve chamber for different type of valves with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand), wall 230 mm thick, top cover slab 150mm thick RCC M20 grade (1:1½:3 i.e. 1 Cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) with C.I. surface box with hinged cover 100x100x75mm (deep) including earthwork excavation, 100mm thick levelling course of PCC M10 (1:3:6 i.e. 1 Cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) including cost of steel reinforcement not less than 80kg per cum CC, form work, proper curing complete in all respect as per standard specifications and drawings and as directed by Engineer.
-
-
-
... More
60cm x 60cm x 75cm (depth) for 80/100/125/150 mm dia valve
45
-
-
... More
Outdoor Feeder Pillar
7
-
-
... More
SITC of 4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% ICU. U imp =8 KV, rated insulation voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in-charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
-
-
-
... More
4 pole MCCB With Thermal Magnetic release
-
-
-
... More
up to 100 Amp , 25 kA, adjustable O/L & adjustable S/C setting,
3
-
-
... More
Providing & Fixing of ISO certified company made bus bar chamber housed in sheet metal box as per PWD specification for electrical Works Confirming to IEC-60439/ IS-8623 & IEC-60529/ IS-2147 made out from 1.6 mm thick powder coated CRCA sheet,degree of protection IP-31 front openable bus bar made out of aluminium or wrought aluminium alloy suitable for 200 amp. Capacity , bus bar fixed on porcelain/DMC insulators at approved spacing including making connections etc. as required. Appropriate type test certificate / OEM test report shall be submitted . All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
600 mm long , 4 strip
3
-
-
... More
LED Type Indicating Light 230V Red/Green/White with Smooth Lens
3
-
-
... More
LED Type Indicating Light 230V Yelolow/Amber with Smooth Lens
3
-
-
... More
LED Type Indicating Light 230V Blue with Smooth Lens
3
-
-
... More
Outgoing:
-
-
-
... More
Cost Of Panel Box Made Out Of I6/14swg Ms Sheet Powder Coated IP42 Class Enclosre As Per Approved Design
4
-
-
... More
Earthing
-
-
-
... More
Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in-charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
61
-
-
... More
Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu purity 95% thimble etc. as required. All as per pre approved by Engineer in-charge. For additional technical paramete
-
-
-
... More
6 SWG copper Wire
1180
-
-
... More
Cable & Wiring
-
-
-
... More
Providing & Fixing of IK08 IP65 protected Top/Bottom mounted LED Post top Luminarie made of single piece construction powder coated die cast alluminium housing with UV stabalized Clear / frosted Polycarbonate diffuser and Aluminium anodised with sand blast reflector. The System level Luminous efficacy ≥ 100 Lumen/W. SMD LEDs is to be used, System CRI70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency 85%, PF0.9, THD10% and input Voltage range of 140-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained . Driver current 750mA. Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
Minimum lumen output 2500 lm Post top Luminarie
186
-
-
... More
PART:E - FOUNTAIN SYSTEM
-
-
-
... More
Supply And Installation Of Fountain Fiber Tank FRP Floater Square 45 MTR Feet Floating Fountain Make By wonderful water As Per Design
1
-
-
... More
Supply And Installatin OF Fountain Brass Gunmetal High Jet Nozzles 1 Inch Size As Per Design
8
-
-
... More
Supply And Installation Of Fountain Brass Peacock Fingers Jets 1.5 Inhc Size \As Per Design
4
-
-
... More
Supply And Installation OF Fountain GI Pipe Ring 1.5 Inch Dia Pipe 1.5 Feat Round Ring 15 Nozzles Adjustable Setup Ring As Per Design
8
-
-
... More
Supply And Installation OF Fountain Gunmetal Brass Rotation Nozzles With Ball Joints Setups 1 Inch Size As Per Design
12
-
-
... More
Supply And Installation Of Fountain Staight 4 Feat GI Pipe Ring 10 Nozzles Pyramid Setups As Per Design
4
-
-
... More
Supply And Installation Of Fountain GI Pipe Ring 1.5 Inch Dia Pipe 6 Feat Round Ring 45 Nozzles Adjustable Nozzles Setup As Per Design
2
-
-
... More
Supply And Installation OF Fountain Centre Jets Nozzles 1.5 Inch Size Adjustable As Per Design
1
-
-
... More
Supply And Installation Of Fountain GI Pipe Ring 1.5 Inch Dia Pipe 8 Feat Round Ring 65 Nozzles Adjustable Nozzles Setup As Per Design
1
-
-
... More
Supply And Installation Of Fountain Submersible Pumps ISI RR Make ( 5 HP - 1 NOS ) ( 7.5 HP - 6PCS ) ( 10.0 HP - 1 Nos ) ( 3.0 HP - 1 NOS ) Copper Rotor Cast Body pump sets
9
-
-
... More
Supply And Installation OF Fountain RGB Led Lights 12 W 36 DC Alluminium Cast Body High Power Multi Programmed
102
-
-
... More
Supply And Installation Of Fountain Panel Board Double Door Powder Coated VFD Base , CH Programmed , Lights Pre Proagramed Funcations , Maany MCB , Auto Timer Panel Board , Manual On Off , Cooling Systems , Solenoid Drivers And Drive Setup All Of Then Music Systems
1
-
-
... More
Supply And Installation OF Panel Board Drive Setups Solenoid N O / N C Valves And Normal Brass Valves Make A Uflow Auto Motions / And Many Others Approx Use Plumbing Points As Per
18
-
-
... More
Supply And Installation Floating Fountain Electric Cabling Works For Pumps And Lights Use 4 Core Flats Cables 4 SQ MM , 1.5 Core Round Cables 1.5 SQ MM Make By Darshan / Jainsons / Lissom ETC Only 100 MTR In Vendor Scope only
1
-
-
... More
Supply And Installation Of Fountain Plumbing material Use UPVC , GI , And Hores Pipes Fiitngs As Per Design Prince , Dutron , Fitron And Others Use
1
-
-
... More
Supply And Installation Of Fountain Installation , Transpotation , Labour , And ETC Other
1
-
-
... More
PART:F - 3 YEAR O&M
-
-
-
... More
1st year
1
-
-
... More
2nd year
1
-
-
... More
3rd year
1
-
-
... More
Cost of establishment of office accomodation of 300 sq. ft. as per contract clause no. 6.28 including power, telephone and water charges, Rate shall be quoted on monthly basis ( maximum 18 months) and cost of Office operations
18
-
-
... More
Water Quality Analysis– Collecting representative sample and Physical & Chemical testing of Parameter from NABL approved laboratory as per CPHEEO manual: PH, TDS, Electrical Conductivity (EC), Taste & Odour, turbidity, magnesium, Total hardness, total alkalinity, chloride, Dissolved Oxygen (DO), sulphate, nitrate, fluoride, Calcium, Iron, Pesticide, Manganese, Cooper, Aluminium, Residual Chlorine, Zinc, phenolic compound, Arsenic, Cadmium, Chromium, cyanides, lead, selenium, Mercury.
6
-
-
... More
Ambient Air Quality Monitoring- For parameters – PM-2.5 & PM-10, SO2, NO2, CO from NABL approved laboratory and submission of report complete in all respect
12
-
-
... More
Ambient Noise Quality Monitoring - To Identify sources of noise, Noise due to traffic/transportation of vehicles, Noise due to heavy equipment operations, Duration and variations in noise over time etc. the equivalent noise levels shall be monitored (Lday and Lnight in Leq dBA) from NABL approved laboratory and submission of report complete in all respect.
12
-
-
... More
Provision of Provisional Sum to be used as tender document (fixed) :INR 25,00,000. Bidder should fill amount INR 25,00,000.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements