Rajasthan Urban Infrastructure Development Program Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 25,00,000Document Cost
₹ 10,000Tender Fee
₹ 1,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_RUIDP_300699_1Bid Award Id
ViewTender No
RSTDSP/BHR/CTYBF/01Tender Authority
Rajasthan Urban Infrastructure Development Program ViewPurchaser Address
-Website
http://http://urbanslbruidp.rajasthan.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete.
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.
269.5
-
-
Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.
34442.8
-
-
Random rubble masonry with hard stone in foundation and plinth :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
1160.75
-
-
Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.
-
-
-
In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m
2048.37
-
-
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications and as per clause 2504 of MoRT&H Specification.
-
-
-
With R.R. Stone/ bolder, weighing not less than 40 kg, thickness not less than 150mm, Specific gravity not less than 2.65.
450
-
-
Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.
-
-
-
Green / Black Above 3601 Cm2 Slabs
44
-
-
Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer.
-
-
-
Cement Concrete Grade M-15 and above and PCC blocks
110
-
-
Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories. Cement mortar 1:4 (1 cement :4 coarse sand)
129
-
-
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
1440
-
-
Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).
324
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 40 mm nominal outer dia .Pipes.
70
-
-
Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite Work
40
-
-
Town Hall Civil Work
-
-
-
Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer.
-
-
-
Lime Concrete, cement concrete grade M-10 (1:5:10) and below
142
-
-
Dismantling Stone Masonry ; Rubble stone masonry in lime mortar
46
-
-
Rubble stone masonry in cement mortar
44
-
-
Steel work in all type section upto a height of 5 m above plinth level (Riveted work where rivet are required to be cut shall be measured and paid separately) including dismembering
10.4
-
-
Scraping plaster in lime or cement mortar from brick/ stone masonry
3860
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-incharge. In cement mortar
34
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
40
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
Of area 3 sq. metres and below
12
-
-
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:
-
-
-
Of area 3 sq. metres and below
14
-
-
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
390.1
-
-
Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
5
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
5440
-
-
Scarifying existing granular road surface, including picking up
scarified material and stacking of old serviceable material within a
lead of 1000 meters complete as per clause 305.4.3 of MoRT&H
specification including all labour, machinery, lighting, guarding and
maintenance of diversion.
920
-
-
Scraping & Removing of white wash/ distemper/algli etc. from plain plaster & surfaces gently with care to keep intact the old designs.
3170
-
-
Scraping & Removing of white wash/ distemper/oil paint /algli etc. from lime plaster highly decorative, ornamental and stucco work with at most care by using fine sand paper under the close supervision to keep intact the old designs.
1935
-
-
De-vegetation from monument by removing bushes, trees including complete uprooting from the wall & roofs/structures carefully including sutaible chemical treatment to roots to avoid further growth including disposal of rubbish with in 50mtr. Lead as per direction of Engineer incharge.
5720
-
-
Carriage of Materials by mechanical transport including loading, unloading and stacking : upto 10 Km: Stone, boulders, gravelly material
4675
-
-
Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.
-
-
-
Earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m.
601.73
-
-
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
-
-
-
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
1890
-
-
Random rubble dry stone Kharanja (soling) under floor.
789.68
-
-
Extra for random rubble masonry with hard stone in superstructure
above plinth level and upto two stories.
176
-
-
Brick work with FPS bricks of class designation 75 in foundation
and plinth in:
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
85
-
-
Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
699.14
-
-
Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :
-
-
-
Suspended floors, roofs, landings, balconies and access platform
247.59
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts.
215
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
122
-
-
Reinforced cement concrete work in beams, suspended floors,
roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: M-20 Grade Concrete (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) -As per design mix)
82.44
-
-
M-30 Grade Concrete
15
-
-
Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand)
4367.41
-
-
Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I,
460
-
-
Providing and fixing wall panelling on existing wood frame as per specification and drawing using : 12 mm thick Acoustical Board
485
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
5024.15
-
-
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
3330
-
-
P & L Lime Surkhi Plaster lime surkhi mortar 1:2 (1 Lime : 2 Surkhi) including preparation of mortar by traditional practice (by grinding) in specified course for base coarse and subsequent course & Loi, tamping, beating, curing till the shrinkage cracks are disappear. The work is to be done with all lead as the work is of restoration nature as per Jaipur practice including adding gur, methi & gugal on old walls including removal of all old loose and decade plaster, each coat to be done after 3 days of previous coat.
-
-
-
45 mm thick in four coats
12005
-
-
Making Mehrab's, Arches, pillars, highly decorative creepers, flower of small sizes etc.in lime Surkhi plaster (1:2) as per B248old traditional practices (Arches, Mehrab's) in three coats for base course and subsequent course and Loi tamping, beating till the shrinkage cracks are disappear than making ornamental flowering/design etc. The work is to done with all leads and lifts as per work of restoration nature as per Jaipur practice.
685
-
-
Add extra over Lime plaster work done over flat ceiling.
1090
-
-
Add extra over Lime plaster work done over curved/circular masonary work (curved or circular surface.)
1130
-
-
Flush and ruled pointing over joints of dressed stone cladding, chajjas, jali etc. including racking the joints as per traditional practice including all leads and lifts with grinded mortar of lime putty and fine sand mixed in 1:2 ratio and gur, methi, gugal etc. are to be mixed as per traditional practice
1070
-
-
Araish plaster (as per Jaipur practice) 1:2 ( 1 lime : 2 Zikki) on lime plaster or plane back ground including preparation of lime for 6 months by slaking of lime with curd and changing the water every week. The Kara plaster of not more than 6 mm thick is to be left the maximum of 3 months to appear the shrinkage & temperature cracks. Over the Kara plaster 2mm layer of grinded lime putty is to be done and is to be rubbed Gently by Akik stone. Then adding Khoppra & Ghee and inserting the design of colour boarder all round.
105
-
-
Coloured plain Araish work 1:2 (1 lime : 2 zikki) on lime plaster or plane back ground including preparation of lime for 6 months by slaking of lime with curd and changing the water every week. The Kara plaster of not more than 6mm thick is to be left the maximum of 3 months to appear the shrinkage & temperature cracks. Over the Kara plaster 2mm layer of grinded lime putty is to be done and is to be rubbed Gently by Akik stone. Then adding Khoppra & Ghee and inserting the design of colour boarder all round including desired colour stone pigment to match the existing colour.
65
-
-
Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured, Gugal, for non-synthetic colour adding gum (babool gum) as per specification.Then applying prepared solution on walls three to four thin coats as desired finishing.
13070
-
-
Stucco work in lime, Surkhi, mortar (1:2) as per existingdesign work/ traditional practices by skilled craftsman,the stucco work should be done as per restoration nature, the mortar should be prepared by grinding mill adding gur,methi & gugal.. The thickness varies from 50mm to 100mm as per the design.
504
-
-
Providing & applying Lime kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manually on lime base,on all flat surface in two coats.First coat applying 3mm to 4mm thick and curing properly at least 7 days,second finishing coat done after 7days of previous coat as per traditional practice.(thickness not more than 6 mm.)
13230
-
-
Add extra for Lime kara work (on lime plaster base) other than flat surface as per traditional practice with all lead & lift with fine finishing complete in all respect on :
-
-
-
domical surface/spherical/domical ceiling.
570
-
-
curved surface.
1300
-
-
Tuman masonry by brick bats/ stones in grinded mortar of Lime Surkhi mortar 1:2/lime sand mortar 1:2 including racking and removal of all old loose plaster and cleaning the wall surface properly as per direction of Engineer Incharge.
4570
-
-
Providing and fixing stone Patties (slab) on roofing including removing broken patties carefully and replacement new slab with Kharanja, ralthal and lime dhar as per traditional practice. Span about 3.30 mtr. To 5.50 mtr. 100 mm to 150mm thick of approved stone.
54
-
-
roviding and laying lime Dhar on roofing as per Rajasthan, Jaipur traditional practice with lime, Surkhi, old lime powder, brick aggregate 12 to 20mm (1:2:2:2) and using Methi, Gur, Hemp, Belgiri etc. including beating and temping 100 to 150 mm thick as per specifications. Including dismantling of old detoriated roofing
2470
-
-
Painting on Stucco work with stone colours including base coat of khameera as per traditional practice (minimum rectangular to be measured).
215
-
-
Providing and fixing double leaf door wooden shutters made of Ist grade wood as per trditional design (Deshi pattern) planks thickness 40mm and width of Binies, Andheri 50mm and 35mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle and patti etc.) as per existing matching/ as per approved design with moulding/ carving complete in all respect :
-
-
-
M.P teak wood grade Ist
82
-
-
Providing and fixing double leaf Window wooden shutters made of Ist grade wood as per trditional design (Deshi pattern) planks thickness 25mm and width of Binies, Andheri 35mm and 25mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle and patti etc.) as per existing matching/ as per approved design with moulding/ carving complete in all respect :
-
-
-
M.P teak wood grade Ist
61
-
-
Providing and applying breathable, non-reactive, transparent,
antifungal, UV resistant, alkaline stable, impregnable silane-siloxane or equivalent based water repellent coating on exposed absorbing substrate like stone surface/ concrete surface/ mineral painted surface / exposed brick surface / lime surface in two or more coats to give uniform finish surface in all heights, horizontal, inclined, vertical and on ceiling complete in all respect and making it complete water-proof as per direction of the Engineer-in charge.
14415
-
-
Providing and applying ceilent adhesive to existing cracks by
suitable silicon or equivalent ceilent complete in all respect and making it complete water-proof as per direction of the Engineer-in charge.
244
-
-
Chemical treatment of sand stone to clean from yellowness,
blackness, algal growth, dust, dirt oily accretions, lime & gypsum deposits, filling of cracks/ joining of gaps/ pointing, strengthening of weak stone, removal of salt effect and application of preservative coating to prevent algal growth and make the stone water proof.
2562
-
-
Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.)
-
-
-
With float glass panes of 5.50 mm thickness
81
-
-
Extra for providing opening of required size & shape for wash
basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete
16
-
-
Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).
123
-
-
Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story height made with 40mm dia. M.S. tube 1.5 m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. (To be used for maintenance work judicially . necessary deduction for scaffolding in the existing item to be done.)
15840
-
-
Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Electric resistance or induction butt welded tubes.
12500
-
-
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
11776.25
-
-
Providing and laying water proofing treatment in sunken portion of
WCs, bathroom etc., by applying cement slurry mixed with water
proofing cement compound consisting of applying :
a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water
proofing cement compound @ 0.253 kg/sqm. This layer will be
allowed to air cure for 4 hours.
b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with
water proofing cement compound @ 0.126 kg/sqm. This layer will
be allowed to air cure for 4 hours followed with water curing for 48
hours.
The rate includes preparation of surface, treatment and sealing of all
joints, corners, junctions of pipes and masonry with polymer mixed
slurry.
1120
-
-
Town Hall Civil Work-A&M
-
-
-
Providing & applying Lime kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manually (on lime surkhi/sand plaster base) on decorative/ornamental lime plaster in two coats.First coat applying 3mm to 4mm thick and curing properly at least 7 days,second finishing coat done after 7days of previous coat as per traditional practice.(thickness not more than 6 mm.)
610
-
-
Making Gardana under ceiling/ chajja with katla stone and grinded Lime surkhi mortar 1:2 including moulding work and fine finishing with grinded Lime surkhi mortar 1:2 as per existing matching/ traditional practice completev in all respect;. - Size 25cm X 25cm.
579
-
-
Making Bend -patta, Cornice, Gola & String course with katla stone and Lime surkhi mortar 1:2 (projected ) and finishing with grinded Lime surkhi mortar 1:2 including moulding/ design work as per existing matching at site complete in all respect. - Size 15cm X 10cm.
652
-
-
Providing and fixing "Corrugated" surface sand stone/approved stone flooring for ramp-way with fine dressed corrugation work as per approved design and size over a base of of grinded Lime surkhi mortar 1:2 and jointed with masaldar lime putty and stone powder 1:1 with an adixure of pigment, complete in all respect, as per direction of Engineer Incharge.
-
-
-
(a) 75 mm. thick stone slab
255
-
-
Providing & fixing ashlar "Rain water Spouts" (3) lines dressed as per traditional practice / existing design / approved design size 60 x 30 x 25 cm, fixing the rain water spout with lime surkhi mortar 1:2, with proper slope complete in all respect.
40
-
-
Providing & fixing in lime surkhi mortar 1:2, single paitam (rebated) store doors, window and ventilator frames as per existing matching or approved quarry including removing of damaged parts of frame, the cuting of corner as per drawing complete in all respect. - size 100mm x 75mm
56
-
-
(b) size 100mm x 100mm
50
-
-
(c) size 125mm x 100mm
39
-
-
Providing & fixing fine dressed machine cut sand stone/approved stone Stone steps (Treads & risers) with round nising as per existing matching fixing in lime surkhi mortar 1:2 including pointing in lime cream and stone dust 1:1 with an admixture (50mm to 60mm thick)
3675
-
-
Providing and Fixing fine dressed sand stone approved stone" Railing" as per existing design and matching with thambli,fixing of railing with proper adhesive /clips complete in all respect (thambli & clips paid seperately.)
-
-
-
(b) 75 mm. thick with moulding/lining.
1045
-
-
Providing and Fixing fine dressed sand stone /approved stone "Thambli" (katahara pillers including) kalash on top,fixing on dasa as per existing design for fixing of stone jalies/railings including making grooves as per required size.
-
-
-
(a) Size 100x100x750mm including kalash with moulding.
1050
-
-
Providing and Fixing fine dressed sand stone /approved stone "Chajja" for palaces,chattries,forts and jharokas with fine dressed surface both sides and front edges should be round shape/moulding, fixing in grinded lime surkhi mortar 1:2 joint flush with proper adhesive with pigment to match the shade of stone (thickness of chajja on front edge 50mm and 75mm on fixing end) exposed surface is to be measured only.
64
-
-
Providing and fixing fine dressed sand stone "Dasa/coping" as per existing matching , fixing in grinded lime surkhi mortar 1:2 including pointing in cream and stone powder 1:1 with an admixture of pigment to match the shade of stone complete in all respect. - (a) 75mm to 100mm thick with pan patti design.
1029
-
-
Providing and fixing fine dressed sand stone "Cladding" (Plain dressing only) as per existing matching , fixing in grinded lime surkhi mortar 1:2 including pointing in cream and stone powder 1:1 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding. - upto 50mm to 60mm thick'
437
-
-
Providing and fixing fine dressed "sand stone flooring " with white sand stone (Bansh paharpur/dholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base of lime surkhi mortar 1:2 including jointing finished flush with lime putty and stone powder with an admixture of pigment as per direction of Engineer incharge. (75mm thick)
11200
-
-
Providing, casting, curing, erecting and fixing in position Lime Jali (lime lattice ) 40mm to 50mm thick as per existing design and pattern with grinded lime surkhi mortar 1:2 adding gur, methi gugal etc. as per specification complete in all respect including all scaffolding.
35
-
-
Providing and spray/brushing of Gur, gugal & methi solution for bonding of lime work as per specification (200gm gugal, 200gm belgiri powder, 200gm methi powder and 1 kg. Gur mixed in 20litre water and boiled and sttired till the solution volume reduce upto 3/4th) using 15.00litre solution in 10.00Sqm area.
14490
-
-
Steel-rod stitching incracked stone patties, beam,and lintels.Providing and fixing stainless steel rods of 90cms length of which 15cm on either side and cold bending at 90degrees. The stainless steel clamps to be fixed perpendicular to the crack by drilling in stone and fixing with cement and aradite mixture in such a way that the entire length of the rod is in complete contact of the stone and the bent ends are fully inserted in the cracked stone. Use 316 grade stainless steel charge per hole.steel rod charges are counted per kg.Holes with 6mm, 8mm, 10mm or 12mm dia.as per requirement of position.
63
-
-
Crack filling in masonary walls with grinded masaldar lime surkhi mortar 1:2 (adding gugal, gugal, methi, belgiri ) including cleaning the crack properly complete in all respect- Crack thickness (average) upto 25mm (average)
765
-
-
Providing and fixing fine dressed sand stone "Todies" (Brackets) as per existing matching stone with moulding work with fine finishing , fixing in grinded lime surkhi mortar 1:2 including scaffolding, lead & lift complete in all respect.
-
-
-
(b)Size : 60cm X 45cm X 7.50cm (exposed part only.)
60
-
-
(c) Size : 90cm X 60cm X 10cm (exposed part only.)
37
-
-
Town Hall Sanitry Work
-
-
-
Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks
12
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)
-
-
-
15mm nominal outer dia pipes
74
-
-
20mm dia nominal outer dia pipes
62
-
-
25mm dia nominal outer dia pipes
85
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all
CPVC plain & brass threaded fittings. This included jointing of pipes
& fittings with one step CPVC solvent cement, trenching, refilling &
testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
32 mm nominal outer dia .Pipes.
10
-
-
40mm dia nominal outer dia pipes
76
-
-
50 mm nominal outer dia pipes
73
-
-
Providing and fixing on wall face Unplasticised Rigid PVC Single socketed pipes rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
-
-
-
75 mm dia
120
-
-
110 mm dia
275
-
-
Providing and fixing on wall face Unplasticised - PVC moulded
fittings/ accessories for Unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A including jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
-
-
-
Coupler
-
-
-
75mm dia
36
-
-
110mm dia
38
-
-
Single push fit Coupler :
-
-
-
75mm dia
30
-
-
110mm dia
34
-
-
Single tee with door
-
-
-
75x75x75 mm
38
-
-
110x110x110 mm
36
-
-
Single tee without door
-
-
-
75x75x75 mm
40
-
-
110x110x110 mm
36
-
-
Bend 87 .5
-
-
-
75mm dia
30
-
-
110mm dia
34
-
-
Shoe ( Plain )
-
-
-
75mm dia
30
-
-
110mm dia
34
-
-
P, Laying &Jointing R.C.C. class NP-2 (Non pressure) pipes (IS:458) with collars. Jointed with cement mortar of ratio 1:2 including excavation etc. as required.
-
-
-
150mm dia Internal
125
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required
-
-
-
One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
16
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
14
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
-
-
-
White Vitreous China Wash basin size 550x400 mm with a pair of 15mm C.P. brass pillar taps.
19
-
-
Providing and fixing PTMT Bottle Trap for Wash basin and sink.
-
-
-
Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms.
18
-
-
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.
-
-
-
Waste coupling 31mm of 79mm length and 62mm breadth weighing not less than 45gms.
17
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin
including P.V.C. waste fittings complete.
-
-
-
Flexible pipe : 32 mm dia
17
-
-
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.
20
-
-
Providing and fixing toilet paper holder :
-
-
-
C.P. brass
18
-
-
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms.
18
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall
-
-
-
15 mm dia. nominal bore
86
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work :
-
-
-
15 mm dia nominal bore.
44
-
-
25 mm dia nominal bore.
197
-
-
32 mm dia nominal bore.
41
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
25 to 40 mm nominal bore
20
-
-
50 to 80 mm nominal bore
16
-
-
Supply, fixing, testing and commissioning of Multi jet magnetic type
domestic water meter Class-B confirming to IS:779-1996 / EEC/
MDIL with end coupling as per relevant technical specification and
the direction of the Engineer. 15 mm size
4
-
-
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).
4
-
-
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
21
-
-
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
19
-
-
Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end) : 25 mm nominal bore
18
-
-
32 mm nominal bore
19
-
-
Providing and fixing square-mouth S.W. gully trap grade 'A'’
complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 150 x 100 mm size P type. With sewer bricks conforming to IS : 4885
14
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With Sewer bricks conforming to IS : 4885
6
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
23000
-
-
Nehru Park Civil works
-
-
-
Earth work in excavation in open area, STP, WTP, Pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of Engineer. (Measurements for payment to be done as per standard drawings).
-
-
-
In all type of soil Upto 3.0 m depth
24
-
-
Providing and laying damp-proof course with cement concrete grade M-15 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification . 50 mm Thick
15.53
-
-
Providing and laying damp-proof course with cement concrete grade M-15 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification . 75 mm Thick
140.82
-
-
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level :
-
-
-
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
2.61
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: M-25 Grade Concrete (1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) -As per design mix)
-
-
-
M-25 Grade Concrete (1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) -As per design mix)
0.86
-
-
Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete.
-
-
-
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : : Cement mortar 1:6 (1 cement : 6 coarse sand)
13.09
-
-
Providing & fixing door, window, chowkhats and other frames,
including antitermite treatment, M.S. flat, hold fasts of size 250 x 40
x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in
cement concrete M-15 grade : Sheesham wood Grade - I.
0.04
-
-
Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure 'A' 25 mm thick Commercial Veneer both side
1.89
-
-
Cement mortar 1:4 (1 cement : 4 coarse sand)
11.98
-
-
Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
1:4 (1 cement : 4 fine/ coarse sand)
14.54
-
-
Cement plastering including T&P, scaffolding, material and complete lapour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster finished with a floating coat of neat cement of mix : )
-
-
-
1:3 (1 cement : 3 fine/ coarse sand
32.44
-
-
Providing and fixing upto two stories precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete.
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
0.6
-
-
Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion).
10.5
-
-
Supplying Chlorpyriphos / Lindane emulsifiable concentrate of 20% in sealed containers including delivery as specified.
1.05
-
-
Providing and fixing 1.2 metres high GI barbed wire fencing with 1.8 m angle iron posts 40 mm x 40 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2 diagonals interwoven
with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 807 of MoRTH specification & type "A" as per IS : 278-1978 size designation 5 (line wire 2.24, point wire 2.00mm mass 97-106 g/m) includiing all material, labour.
140
-
-
Random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of MoRT&H specification including all scaffolding material, labour, machinery but excluding pointing and plastering.
In cement mortar 1:4 (1 cement : 4 coarse sand)
96.59
-
-
Brick work with machine moulded perforated bricks of class designation 125 conforming to IS: 2222 -1991 in superstructure above plinth level upto two stories in cement mortar 1:6 (1 cement : 6 coarse sand) : With FPS bricks.
54.59
-
-
Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :
1:4 (1 cement : 4 fine/ coarse sand)
470.72
-
-
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg / 10 sqm.)
427.22
-
-
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :
a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 g/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately For the purpose of measurement the entire treated surface will be measured.
6
-
-
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side /top /centre hung with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of hinges, pivots, float glass panes with glazing clips and special metal sash putty of approved make and a priming coat of approved steel primer excluding the cost of metal beading and other fittings except necessary hinges or pivots complete as per approved design.
7.2
-
-
24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm ± 0.2 mm wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
4.94
-
-
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge.
14.95
-
-
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).
3
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer.
14.54
-
-
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
14.61
-
-
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead :
-
-
-
With cement mortar 1:4 (1 cement : 4 fine sand)
36
-
-
Finishing walls with textured exterior paint of required shade :
-
-
-
Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.
36
-
-
Providing and fixing 1st quality MAT & GLOSSY finished ceramic tiles colour such as standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the the cost of cement mortar bed 1:4) Size 300mm x 450mm
21
-
-
Providing at site, lowering & laying in trenches, aligning & jointing of PVC-U pipes (SN 8) as per IS 15328 (amended up to date) and as per specifications with rubber rings with socket and spigot joint, (EPDM/SBR) for all depths for pipe length as per drawing and specification including hydraulic field testing (including the cost and conveyance of water to site for testing) and commissioning etc complete as directed by Engineer.
Note : E/w to be measured and paid separately.
100 mm Nominal Dia
25
-
-
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 ( 1cement : 5 coarse sand) with joints finished flush.
-
-
-
Red Sand Stone
600
-
-
Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work.
800
-
-
Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :
-
-
-
One face dressed Red sand stone
2.32
-
-
Both face dressed.
-
-
-
Red Sand Stone (selfie point statue)
1.2
-
-
Providing and making house service connections from water supply distribution uPVC pipe line upto 150mm dia and upto water meter chamber inside the property using MDPE (Class-PE 80) composite pipes upto 2 metre length including supply and fixing of ferrules, clamps, rubber sheets, tapping, compression fittings etc, complete including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer.
25 mm dia service pipe
1
-
-
Providing, lowering, laying & jointing MDPE pipes (Class-PE 80) composite pipes for extra length for house service connections as per drawing and specifications complete including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer.
25 mm dia service pipe
120
-
-
Construction of tube-well from ground levels and upto 100 Meter depth and above to accommodate housing and assembly pipe of following sizes in all types of alluvium strata by percussion/ rotary drilling method and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I -& II) 1979 as amended upto date (the work includes the cost of gravel & its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coir-rope, wherever necessary for arresting fine sand particles. The work will not include cost of housing pipe and strainer pipe assembly and development work, but work would be completed after obtaining sand free water). 150 mm dia Nominal bore.
160
-
-
Development of tube well as per IS specification using suitable compressor to give sand free water for required yield of the gravel packed tube well.
8
-
-
Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work. 150 mm dia
125
-
-
Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985.
150 mm dia
30
-
-
S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size: 150 mm dia
1
-
-
S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.
2
-
-
Providing & lowering of G.I. Pipes, flange pipe including rubber washer and nuts of 8 mm dia complete in all respect I.S.I. Make. B Class 50 mm dia
150
-
-
Installation of submersible motor pump set in tube-well/open well complete (labour charges only) including transportation of tripod, chain pulley block & any other material required for lowering purpose.
1
-
-
Providing and laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required
4.0 Sq.mm 3 core flat
240
-
-
Providing P.V.C. insulated & P.V.C. sheathed cable of 1.1 kv grade with aluminum conductor of IS : 1554 P-1 of group –II of approved make in ground as per IS ; 1255 including excavation of 30cm x 75cm size trench 25mm thick under layer of sand IInd class bricks covering refilling earth compaction of earth making necessary connection testing etc. as required of size 6.0 sqm mm 4 core.
150
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever
required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
2
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
15 mm diameter
10
-
-
20 mm diameter
10
-
-
Providing and fixing brass bib cock of approved quality :
20 mm nominal bore
8
-
-
Providing and fixing brass stop cock of approved quality :
-
-
-
20 mm nominal bore
4
-
-
Providing and fixing gun metal non return valve of approved quality (screwed end) 50mm nominal bore Horizontal
1
-
-
Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100 x 100 mm size P type. (With F.P.S. Bricks class designation.)
-
-
-
150 x 100 mm size P type.
-
-
-
With bricks class designation 75
1
-
-
Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : with FPS bricks
2
-
-
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
-
-
-
15 mm nominal bore, 105 mm long. Weighing not less than 138gms.
7
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.
-
-
-
600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.
2
-
-
Cobble stones in sizes 125x125x75mm
120
-
-
Constructing soak pit 1.20 mx 1.20m x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
1
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With bricks with class designation 75
1
-
-
Painting top of roofs with bitumen of approved quality at 17 kg. per 10 sqm impregnated with a coat of coarse sand at 60 cum per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. With residual type petroleum bitumen of penetration 80/100
10.43
-
-
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
15.32
-
-
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with meet cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) : Light shade using white cement.
10.43
-
-
Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade.
40.05
-
-
Providing of synthetic rope for submersible pump ISI marked (IS:5175) of following sizes.
16mm (suitable above 50mm & up to 75mm OD pipe)
160
-
-
Supply Installation testing & Commissioning of ISO certified company made DOL/Star-Delta Starter panel made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating
lamps etc. suitable for following rating motors complete in all respect. Appropriate type test certificate / OEM test report shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
For Three phase Submersible / Mono block pump
3.0 HP to 10.0 HP ( Star / Delta )
1
-
-
Supply Installation testing & Commissioning of Radial / mixed flow ISI marked water filled submersible motor pump sets suitable for 100/150mm dia borewell. The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The construction material of motor and pump should match IS: 8034:2018 and IS 9283 guideline. The radial flow pumpset should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011 with required accessories including making connection suitable for Bore well. The job includes labour part of lowering of riser pipe G.I./H.D.P.E. with rope, cables & pump, installation of complete fitting
and accessories, jointing of electrical cables up to switch board. All
labour for testing of submersible pumps set and supply of water to
water mains, complete in all respect . All as per pre approved by
Engineer in charge. For additional technical parameters of products/
work.
-
-
-
150 mm diameter Submersible pump shall have following HP Rating, phase, Head range, Discharge range respectively. 7.5 HP, 3-Ø, (76 - 96)Mtr, (285-180) LPM
1
-
-
Nehru Park A&M works
-
-
-
Providing and Fixing "Cobbles" on path way / open court yards over 40mm thick base grinded lime surkhi / lime sand mortar 1:2, including keeping 10mm joint between cobbles filled with masaldar grinded lime surkhi mortar 1:1 complete in all respects. The mortar should remain recessed by 5mm from the top surface of the cobble stone.
-
-
-
(b) 200 mm. thick
540
-
-
Brick work with Lakhori bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in :
-
-
-
Lime mortar 1:2:1 ( 1 Lime putty : 2 Surkhi : 1 Sand )
890
-
-
Providing and Fixing Lime/Mud/Masonary Bluster with Lime Kara finish as per detail and design as per the Engineer in Charge.
85
-
-
Toughened float plain Glass 8mm +1.5 mm (Laminate Film) +8mm of standard for Single/Double door with, Edges of Glass polished, and fitting of door, locking arrangements, both way handle (german fitting) page fittings & fixture SS 304 complete in all aspect (cost of floor spring will be paid speratly including Wooden Frame 1st grade seasoned wood etc.
33
-
-
Toughened float plain Glass 8mm +1.5 mm (Laminate Film )+8mm of standard make saint goblin/modi/Tata, as per ite requirement for fixture 2.4 x1.5-3.6 including Supporting Fixed Glass including Wooden Frame 1st grade seasoned wood as per traditional design (Desi pattern )planks thickness approx. 70 mm and width frame 70 mm fixed over wall etc
35
-
-
Double action Hydraulic floor Spring of approved brand/Manufacturer for glass door ( cost of spring only) including cost of cutting floors as required embedding in floors and cover plate etc. complete as per direction of Engineer in charge in Make-Ozone/Dorma/CNR, Equivalent
16
-
-
Removal and refixing of stone chajja 50 to 75mm thick, stone used to be similar to the existing ones at the site, cutting in proper shape and providing interlocking keys in the new as well as old stone for proper bonding including finishing the edges in all respects in lime surkhi mortar (1 lime putty : 2 surkhi).
27
-
-
Repairing of existing historic window/doors for hardware, rotten/ deteriorated parts. Proper fixing and making it operational with locking possibility including moulding, carving and polishing. Refer drawings for window types.
50
-
-
Removal and Refixing of loose stone cladding and pointing with rich Lime mortar & proper adhesive with pigment to match the shade of stone complete. Thickness 50 to 100 mm with nessacary joining accassory etc. Complete .
35
-
-
Providing & fixing ornamental (both side carved) sand stone Jali as per existing desing & pettern with fine finising and grained lime surki mortar 1:2 incuding all scaffolding, lead and lift complete on all respected. the expose rectangle area shall be mesured for payment at the place directed by Engineer Incharge Avg thickness of stone upto 50 mm
52
-
-
Providing/Carving/Fixing approved sand stone 2 Mt long benches with 75 mm thick pan patta dasa top fixed in stone pair as per detail drawings,design and as directed by engineer incharge complete in all respect.
139
-
-
Providing,carving and Fixing of building signages in approved sand stone of size 750x450x50 mm.Engraving,painting of latters as per drawing and design.The signage stone shall be fixed on the building wall complete as per details and drawings and as directed by engineer incharge.
8
-
-
Providing,carving and Fixing of information signages in approved sand stone of size 1000x500x50 mm.Engraving,painting of latters as per drawing and design.The signage stone shall be fixed on the post of same stone of size 100 x 100x 1350 above ground and 1/3 of total height of post shall be embedded in ground with neccesary earthwork and concreting etc.as per the intructions of Engineer In-charge complete in all respects.
6
-
-
Providing and fixing in position Red Sand Stone Kerb of size 150 mmx300 mm and cut to shape as per with exposed face fine chiesel dresses fixing and jointing/pointing with cement mortar 1:4 using pigment as per drawing and instruction of Enineer Incharge complete in all respect.
1600
-
-
Supply and fixing of HI RIB roofing system manufactured out of 0.50mmTCT (Total Coated Thickness) high tensile zinc aluminum alloy coated with an alloy about 55% aluminum, 43.5% zinc&1.5% silicon Precoated Galvalume high tensile cold rolled steel as per AS 1397, coating class AZ 150 (min. 150 gms/m2Zinc aluminum alloy coating mass, total both side 550 Mpa yield strength) conforming to AS 1397/ASTM A792 of approved colour.Sheets to have wide pans and 28-30mm.Hi-Ribs at 200-250 mm Centers and a cover width of 1010 mm and an overall width of 1050-1060mm. Sheets shall be fixed by means or self-drilling self-tapping hot dip zinc coated climaseal polymer coated hexed fasteners of size12x14x55mm long of Roofix or equivalent. The sheets shall be supplied in custom lengths as per design and details. Sheet to be Trimdeck of TATA bluescope or equivalent. The rate shall include bending as per profiles in drawings. The colour to be approved by the consultant before installation. The contractor is to provide the sample colours for approval. Only finished measurements will be paid for. The end lap of sheet to be minimum 150mm and sealed with silicon sealant. The side lap to be minimum 50mm or as per manufacturer's specifications. Final complete executed areas will be paid for. Item to include Neoprene gasket between M.S. member and roofing sheet. Item to include making sleeves for tie member and making the junction water tight.
827
-
-
Removing damage solid stone Architectural elements (Pillers stone, Plinth stone, sill stone, pannel stone,Niches etc) and Providing & fixing new stone ( plain / ornamental) in approved stone with mechanical/ manual system carefully as per existing stone design & pattern as directed by engineer in charge complete in all respect.
15
-
-
Providing and fixing new Stone Ornamental Architectural elements(Mehrab, Surface pannels, Oranmental bends) in approved sand Stone and fixed with mechanical/ manual system carefully as per existing stone design & pattern as directed by engineer in charge complete in all respect. Thickness up to 100 mm
79
-
-
Providing/ Carving/ Fixing of signages made Cast Iron Pole of approved design 2800 mm high with both side Retro‐Reflective sign board of size 750X375 mm. fixed over 2mm thick aluminum , around 38mm Dia SS Pipe including necessary SS Clamp, nuts and bolts, fixed to the ground by means of property designed foundation with M20 grade cement concrete 45cm x45cm x 90cm etc. including nominal reinforcement. as per detail drawing and as directed by engineer incharge and as per detailed drawing complete in all respect. ( Approx weight of column 90 Kg. )
20
-
-
Providing/Carving/Fixing of placing of Dustbin in Bansi Paharpur stone with Carved Arch pattern and wire mash litter bin inside , over all size of dust bin will be 900x900x1200 as per detail drawing and as directed by engineer incharge complete in all respect.
98
-
-
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in lime mortar 1:2 (1lime : 2coarse sand), including making the necessary chases.
660
-
-
Providing and Fixing White Sand Stone"Cobbles" ( Size 150 x 300 mm x 200 mm thk.) on path way / Road Way / open court yards over 40mm thick base grinded mortar 1:2, including keeping 10mm joint between cobbles filled with masaldar grinded mortar 1:1 complete in all respects. The mortar should remain recessed by 5mm from the top surface of the cobble stone.
6495
-
-
Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. , Lintels, beams, plinth beams, girders, bressumers and cantilevers
417.5
-
-
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.
16
-
-
Providing, lowering, laying in trenches, aligning, fixing in position and jointing socketed rubber gasket type ISI marked uPVC pipes of Class III (6 Kg/sqcm) suitable for potable water with rubber ring joints (as per IS 4985-2000) of following outer dia with all accessories (excluding specials) complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer Note : E/w to be measured and paid separately. 90 mm dia
80
-
-
Part-B: HORTICULTURE, LANDSCAPE, BEAUTIFICATION WORKS
-
-
-
Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge, farm- yard manure or/and good earth to be paid for separately).
660
-
-
Grassing with 'Doobs' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed. In rows 7.5 cm apart in either direction
5180
-
-
Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart.
850
-
-
Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 900 mm min. height plants at site in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required.
-
-
-
Ficus panda
220
-
-
Tecoma capensis ( Ratanjot)
230
-
-
Tabernaemontana variegated ( Chandni)
280
-
-
Supplying and stacking good earth at site of work.
Note: 1) Loading, unloading and carriage to be paid extra as per actual lead. 2) Earth measured in stacks will be reduced by 20% foe payment
600
-
-
Supply at site of work well decayed farm yard manure, from any available source, approved by the engineer in charge including screening and stacking.
660
-
-
Supply and planting following species best quality container grown healthy trees of 3 mt. min. height, well established & free from disease at site in 1.20 m dia holes, 1.20 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required.
-
-
-
Plumeria alba ( Champa) 3 M height minimum
320
-
-
Gulmohar(Delonix regia)
130
-
-
Jacaranda mimosifolia (Neelli Gulmohar)
110
-
-
Town Hall horticulture
-
-
-
Digging holes in all kinds of soil and refilling the same with the excavated earth mixed with well decayed farm yard manure (cost of well decayed farm yard manure to be paid separately).
-
-
-
Hole 1.2 m dia and 1.2 m deep
390
-
-
Hole 0.9 m dia and 0.9 m deep
390
-
-
Hole 0.6 m dia and 0.6 m deep
740
-
-
Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 900 mm min. height plants at site in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required.
-
-
-
Hamelia patens ( Firebush, Thal Kamal)
150
-
-
Supply and planting following species best quality container grown healthy trees of 3 mt. min. height, well established & free from disease at site in 1.20 m dia holes, 1.20 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required.
-
-
-
Neem(Azadirachta indica)
150
-
-
CONSERVATION & DEVELOPMENT WORKS OF SALIGRAM KUND AT BHARATPUR
-
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : - Two or more coats on new work
630.05
-
-
Providing and fixing soil, waste and vent pipes : Sand cast iron S&S pipe as per IS: 1729. 100 mm dia.
60
-
-
Stone work, plain in copings, cornices, string courses and plinth
courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6
coarse sand) including pointing with white cement mortar 1:2 (1
white cement : 2 stone dust) with an admixture of pigment matching
the stone shade. White sand stone
48
-
-
Sanitry Work
-
-
-
Providing and fixing fine dressed 35mm to 40mm thick " flooring " with white/light pink sand stone (machine grinded surface) machine cut of approved shade set in pattern over 30mm thick base of lime surkhi mortar 1:2 including jointing finished flush with lime putty and stone powder with an admixture of pigment complete in all respect.
200
-
-
Removal of sludge (by dredging method ) for the lake with suitable mechanical means, during dredging water should not be drained out, including disposal of sludge up to 20 km.
34105
-
-
Brick work with Lakhori bricks of class designation 75 in foundation and plinth in:
-
-
-
Lime mortar ( 1 Lime putty : 1 Surkhi : 1 Sand )
425
-
-
Providing,carving and fixing of 750 mm high decorative bollards (100 mm dia circular base and 75 mm circular top) of sand stone with fixing in White cement with Araldite & colouring pigment to match same as stone colour and as per detail drawings,design and as directed by engineer incharge complete in all respect.
183
-
-
Providing,carving and Fixing of building signages in approved sand stone of size 750x450x50 mm.Engraving,painting of latters as per drawing and design.The signage stone shall be fixed on the building wall complete as per details and drawings and as directed by engineer incharge.
13
-
-
Providing,carving and Fixing of information signages in approved sand stone of size 1000x500x50 mm.Engraving,painting of latters as per drawing and design.The signage stone shall be fixed on the post of same stone of size 100 x 100x 1350 above ground and 1/3 of total height of post shall be embedded in ground with neccesary earthwork and concreting etc.as per the intructions of Engineer In-charge complete in all respects.
15
-
-
Providing and fixing new Stone Ornamental Architectural elements(Mehrab, Surface pannels, Oranmental bends) in approved sand Stone and fixed with mechanical/ manual system carefully as per existing stone design & pattern as directed by engineer in charge complete in all respect. Thickness up to 100 mm
8
-
-
Nehru Park Horticulture
-
-
-
Digging holes in all kinds of soil and refilling the same with the excavated earth mixed with well decayed farm yard manure (cost of well decayed farm yard manure to be paid separately).
-
-
-
Holes 0.45 m dia, and 0.45 m deep
60
-
-
Nehru Park Non BSR items
-
-
-
BOAT STYLE FLOATING HIGH & HEAVY CASCADE WATER FORMATION (HEIGHT- 13 Mtr.)
-
-
-
(a) Supply, installation & commissioning of Boat Style Floatation System, from an ISO 9001:2008 certified company/Firm, in the form of two floatation compartment made of Fibre glass reinforced plastic (FRP). Floats immune to rust corrosion or rot. Each FRP float consists of a shell of FRP lamination between 3-4mm thick. This shell shall be completely sealed to prevent ingress of water. To provide for any eventually whereby the shell is holed, it shall be completely filled with closed cell foam which shall prevent the ingress of water. The foam shall be polystyrene and should fill the whole of the shell. The nozzles, water formation head, submersible pumps, lights all are mounted on this glass reinforced plastic white boat with minimum infrastructure. Provision for fixing lights in hidden recesses. An anchoring system with buoys keep the water formation in position but at the same time make it easy to bring the water formation ashore if required. Practical answer to install a water formation in minimum time and without costly civil work. Specifications:
Length of Boat: 4.32 mtr , Width of Boat: 1.00 mtr , Length of Steel Channels: 2.5 mtr, Length of size of Steel Wire Ropes: 3/8” 50 ft x 4 lengths
Under frame of steel protected by hot dip galvanizing. Fittings in plated steel. Proper anchoring system provided with aluminium bouys and steel cables and clamps and eye lugs for casting in anchor blocks.
Make of floatation system: Premierworld (Premier Fountains)/Wet Design/OASE Only.
Note: Minimum depth of water in Lake shall be: 1.5 meters
Supply, installation & commissioning of Pumpsets with accessories, from an ISO 9001:2008 certified company/Firm, with following description:
i) Pump set: 2 x 10 h.p mono submersible pumpset with mounting frames. ii) Cables: Armoured cables for connection between control panel and pumps up to a maximum distance of 30 mtrs shall be provided by the contractor. Additional cables, if required will be provided by DDA at its own cost.
iii) Rating & description of mono-submersible pump sets: 7.5KW/10HP iv) Casing, shaft, impeller, make of pumpsets: Make- Sona/Premierworld (Premier Fountains) /Kirloskar/Crompton Greaves/Texmo/OASE/Wet Design. Casing- Cast Iron; Shaft- Steel, Impeller- Cast Iron
v) Motor description: 3-Phase, 50Hz., 2900 rpm
vi) Strainer/filter description including size & make for each pump: 2-1/2” inlet size. Large area filter with Body of filter made of galvanised steel & mesh of stainless steel mesh. Make: Premierworld (Premier Fountains)/Wet Design/OASE Only. vii) Duty of pumps: 965 lpm at 30mtrs head
viii) Description of pumps cable with size & make:
3-core armoured copper cable- not less than 2.5mm2. Make: Finolex/ Jainsons/ Havells/ KDK/ Evershine/ Plaza/ Kalinga/ Gloster
Supply, installation & commissioning of Outdoor type Control Panel, from an ISO 9001:2008 certified company/Firm, with following description:
i) Control Panel: Incoming main switch, contactors, delay timer for star delta starting of motor, HRC fuse base, fuses for lights. All housed in a sheet metal enclosure, paint finish with internal wiring. The electric control panel is installed on land close to the water formation and the pumps and lights controlled from panel. ii) Comprehensive list of items of control panel with makes including gauge of sheet of control panel enclosure. Make of control panel: Premierworld (Premier Fountains)/Wet Design/OASE Only. Control Panel shall be IP55 certified from a Govt. of India Test Laboratory.
a. 63A, T.P.N. Switch Fuse Unit, GE make – 1 no.
b. 12A, Contactor 3 pole, GE make – 4 nos.
c. 9A, Contactor 3 pole, GE make – 2 nos.
d. Thermal overload relay (8- 12A), GE make – 2 nos.
e. Electronic Star-Delta Timer (3S to 120 Sec.), 220V AC, L&T/GIC make – 2 nos.
f. Indicating Lamp (Red) LED type 220V AC, Esbee make – 1 no.
g. Indicating Lamp (Amber) LED type 220V AC, Esbee make – 3 nos.
h. Indicating Lamp (Blue) LED type 220V AC, Esbee make – 1 no.
i. 32A, Fuse Base & Carrier, HRC Type, GE/Busman make – 12 nos.
j. Illuminated Stop Push Button (Red) with ‘NC’ Contact Block & BA95 Fillament Bulbs & Holder, Esbee make – 2 nos.
k. Illuminated Start Flush Button (Green) with ‘NO’ Contact Block & BA95 Fillament Bulb, Esbee make – 2 nos.
l. Terminal Connector 10 Sq.mm., Elmex make – 12 nos.
m. 16A, 3 Pole CAM operated On/Off Rotary Switch, L&T/Salzer make – 1 no.
iii) Size of control panel: 27” x 22” x 7-1/2”, 2mm thick steel sheet.
iv) Outdoor Electrical rain protected enclosure for control panel comprising of 2mm thick steel sheet on angle iron frame. Door with provision for padlock (not provided). Finish red oxide undercoat and enamel/NC paint.
Supply, installation & commissioning of water formation accessories, from an ISO 9001:2008 certified company/Firm, with following description: A Central Jet with six large volume Aerated Jets radiating out from the base – very visible, dramatic and exciting. Peripheral nozzles are fitted on adjustable flanges and control valves for directional adjustment and to control Jet height. Approx. height of water formations: Central Jet- 13 mtr, peripheral 6 nos. – 8 mtrs
a) Make of nozzles: Premierworld (Premier Fountains)/Wet Design/OASE Only.
b) Size of nozzles - inlet & orifice - 6 nos. peripheral nozzles: Inlet- 32mm, Orifice- 40mm, Central nozzle inlet- ¾” BSP, Orifice- 12mm c) Material of construction of nozzle- Central-Brass, Peripheral- Aluminum Alloy-Epoxy coated. d) Nos. of nozzles: 1 no. Central, 6 nos. Peripheral
e) Material of construction of manifold: Galvanised Steel
f) Make of manifold: Premierworld (Premier Fountains)/Wet Design/OASE Only.
g) Size of manifold: 15” dia & 6” inlet
h) Material of construction of control valves & NRVs: Control valves- Gunmetal, Non return valves- Cast Iron
i) Make of control valves: Control Valves-HM/Vijay ISI marked
j) Size of control valves, NRVs: Control Valves- 1-1/4”, Non return valves- 2-1/2”
Supply, installation & commissioning of Water Formation Lights, from an ISO 9001:2008 certified company/Firm, with following description:
Luminaries {Premierworld (Premier Fountains)/Oase/Wet Design make only} comprise of 9 nos. (3 nos. X 3 colours) waterproof sequencing lights. Water-proof luminary shall use PAR lamp 300w x 220/230V precision beam high performance sealed unit. Shall have through connection for “daisy chaining”. Besides gland seals, for extra security against leakage in and out cables shall be sealed in potted wells. Connections shall be made by crimping or soldering. Light body and cover ring shall be made from die cast LM6 aluminium alloy with epoxy polyester coating. Overall height of light body shall be 216 mm and dia 252mm. All external nuts, bolts and studs shall be of AISI 304 stainless steel. Mounting bracket shall be steel protected by hot dip galvanizing. Cable glands. Toughened glasses shall be sealed by double gasket system. Gasket shall be of heat resistant elastomer. Rosco (of Hollywood USA) Supergel coloured film filter of 200mm dia shall be fitted in- between two toughened glasses of 203mm dia each in sandwich construction to protect the filter against damage and dirt, also for easy cleaning. PAR lamp shall be positioned by stainless steel circlip. Certification by Govt. of India test laboratory – IP 67.
Cables: Armoured cables for connection between control panel and lights up to a maximum distance of 30 mtrs shall be provided by the contractor. Additional cables, if required will be provided by the department at its own cost : Description of cable with size & make :2 or 4 core armoured copper cable- not less than 2.5 Sq.mm. Make: Finolex/ Jainsons/ Havells/ KDK/ Evershine/ Plaza/ Kalinga/ Gloster
4
-
-
P & F Sand–cast Floor Trap (Nahni) of (IS:1729 mark) of approved quality/make with socket down or hinged grating including cutting and making good the floor.
-
-
-
Size 100 x 100mm
3
-
-
Supply and fixing Glass Mosaic tiles of 20 X 20 X 4 mm size of approved shade and design with required adhesive over bed of 15 mm thick cement, sand mortar 1:3 including nicely finished joints. Thickness of joints shall not be more than 1.5mm using water proof joints filler (as recommended by manufacture) & finished with flush pointing in white cement mixed with pigment to match the shade of tiles. Complete work as required in all respect.
73.4
-
-
Designing, supply, erection, commissioning and testing of ring type Umbrella fountain which shall contain the following specifications. 1 The Fountain Shall Contain a umbrella of 10ft dia. Complete set Make Premier/Famous/Ripples
4
-
-
Supply and fixing of 3 HP monoblock submersible pump of kirlosker/Pluga/Texmo or equivalent make AC three phase 380/440 Volts, 50 cycle with foundation bolts, suction bend and 10 mtr. Of submersible cable duly insulated.
2
-
-
Providing & Fixing of 3'' S.S. 304 grade wire mesh Mesh Filter for Pump filtration of water at inlet of mono submersible pump. Filter made out of M.S.Sheet & Flats with inlet threaded nipple as per pump inlet. The S.S.mesh fitted on filter body aluminium but type rivet for proper strength.Make Premier/Famous/Ripples
2
-
-
Designing, Supply and fixing of (3 HP X2) 1no. Electirc sequencing control panel box above pump of steel sheet enclosure with front door, back wall mounting type with detachable bottom plate with provision for incoming & outgoing cable. Red oxide under coat and paint finish work on surfaces with Proper fixing of main incoming four pole MCB for Pump and saperate mcb for lights, HRC fuse with base, Contactor, Relay, wiring, Strips complete set. 7 station Pre programmed Microcontroller based Electric controller shall be used to control the lights.
1
-
-
Designing, Supply, erection. Commissioning and testing of of IP68 Protecetd (Certified by any lab of Govt. of India ) underwater lighting system dynamic color changing capability continually red , green, blue shall consist of 9 X 3W, 12 V/24V DC Led lamps Mounted on MCPCB comprising high quality water proof luminaries. The Luminaries shall have die cast aluminum alloy helices for strength and totally protected by fused epoxy polyester coating on all surfaces. The wall thickness of Luminaries not less than 5 mm. The wiring shall be reputed make double insulated PVC within copper conductor. The Connection shall be fully water proof. All external nuts, bolts and stands of stainless steel.
18
-
-
1.5 sq.mm. 4 core submersible cable of approved make
80
-
-
100 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively.
-
-
-
1.0 HP, 1-Ø, (30-78)Mtr, (46-18)LPM (2150 Labour Rate)
1
-
-
Construction of " HUT/ Gajebo/" as per following specification and enclosed photograph. - Circular platform at ground level having overall dia not less than 7.66 Mtr. annular shape footpath. - Plinth Level area 17 Sqm (dia. of circular platform not less than 4.66 Mtr.).- Plinth height 0.60Mtr. from ground level should be in three equal steps having rise 15cm with one side gentle slope ramp having width 1.0Mtr. and with side railing. - Ist roof level height should be not less than 3Mtr. from plinth level.- Total Covered area of Ist roof level not less than 21.50 Sqm.- Roof should be made in frustum of cone shape having frustum height 0.60Mtr. and thickness of roof slab should not be less than 0.125Mtr.- 2nd roof should be made not less than 2.0Mtr. dia. at bottom with 0.60Mtr. cone height at center.- Difference of level between both roofs should be not less than 1 Mtr.- Minimum 6 Nos. R.C.C. (M-20) circular columns having dia 0.23Mtr.with required reinforcement from plinth level to support Ist roof level having load bearing capacity of both roofs with required foundation.- The "Hut" should be facilitated with 1No. round sitting bench of 0.45Mtr. width and 0.10Mtr. thick should be made in R.C.C. of M-20.- R.C.C. work should be complete in M-20 with required reinforcement (not less than minimum) as per relevant IS code. All work should be ornamental and having natural look of wooden finishing with ornamental plaster in rich mortar, using white cement oxide color and bamboo/balli design with final finishing in touchwood color (two or more coats) as per photograph enclosed. With giving asthetic look. The job work should be complete as per direction of engineer incharge and upto satisfaction of engineer incharge .
1
-
-
Electrical Work
-
-
-
Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps . Integrated driver must be potted & has a unique BIS R
number shall be high efficiency having efficiency more than 85 % and in compliance to BIS certified and T.C. certificate. The System level Luminaire efficacy =120 lm/ wt with High Power LEDs is to be used . LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @=300 V AC and Auto resetting Safety . Input Frequency 50Hz±3%, Power Factor 0.95 ,driver Efficiency 85% , THD(I) 10% , driver current 1000mA shown in LM79 report. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector Must be provided, Surge Protection Min =4KV internal and 10KV external, System life of 30000 Burning hours with 70% of Initial Lumens maintained, color Rendering Index 70 and CCT 5700K ±355K. Driver current 1000mA shown in LM79 report. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.
OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.
-
-
-
High Power LED Flood Light 30W
180
-
-
Providing & Fixing of 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C tripping characteristic as per type of load and site requirement) 4KV impulse withstand voltage, as per PWD specification for electrical Works with ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , IP 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 A rating and 10,000 upto 63 A, 5000 for 80 A rating including making connections, testing etc. as required. . OEM shall have submit NABL / CPRI / ERDA accrediated lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters o
-
-
-
Single pole MCB 6 A to 32 A rating
252
-
-
Double pole MCB 40 A to 63 A rating
46
-
-
Providing & Fixing of 240/415 V Residual current circuit breaker (RCCB) as per PWD specification for electrical Works with ISI marked (IS:12640-1) / conforming to IEC 61008 -1 , rated conditional s/c current of 10 KA, truly current operated and shall operate on CBCT mechanisum, provision for pad lock, min. operation 10,000 upto 63 A rating and 5000 for 100 A rating, minimum phase termination capacity of 50 sq.mm. rigid wire , IP 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
Two pole 30 mA sensitivity 25 A rating
45
-
-
Providing & Fixing of IK09 recessed/surface mounting heavy duty horizontal type sheet steel not less then 1.2 mm thick Distribution board as per PWD specification for electrical Works ISI marked conforming to IS-13032 & IS-8623 / conforming to IEC 61439-3. Phosphatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link , connecting wire of suitable rating and din bar,masking sheet, including making internal DB terminations with copper lugs and with detachable gland plate, including making connections, testing etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated
lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
IP-43 Double door (single phase), 12 Way (12 O/G +2 I/C)
45
-
-
Switch Socket
-
-
-
Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) as per PWD specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , minimum width of 1 module switch toggle( PUSH PART ) should not less then 20mm, including all as per pre approved by Engineer in charge,making connections, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
6 A one way switch
120
-
-
16 Amp. 1 Module switch With Led Indicator
30
-
-
Providing & Fixing of modular type lockable feature socket duly ISI marked (IS :1293) as per PWD specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
6 A 3 pin shuttered socket
40
-
-
16 A 6 pin shuttered socket
20
-
-
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free ( 10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A or C ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4, in existing surface or recessed PVC/ MS conduit/casing capping including all as per pre approved by Engineer in charge,making connections, etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
1 x 1.5 sq.mm
6215
-
-
1 x 2.5 sq.mm
18895
-
-
1 x 4.0 sq.mm
18195
-
-
Supply & Laying following size earth strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
25mm x 6mm G.I. ( Hot Dipped ) Strip
2190
-
-
roviding & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Unarmoured / Armoured aluminium cable of 1.1 KV grade as per PWD specification for electrical Works in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench with filling of excavated earth in trench , on existing cable trays or on surface etc. including making necessary connection, testing etc. as required of size and as per points (a), (b), (c), mentioned below:- (a) Material :- H4- Grade aluminium conductor of purity 99.6 % & as per IS:1554 P-I / IS :7098 P – I (b) conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999 for armouring of cables in armoured cable items , IS 5831 for sheath, IS 10810 (Part 0 to 64 ) for testing procedures. (c) OEM Must have ISO 9001 & 14001 certifications for quality assuarance & its own in house NABL lab setup for all testing facilities for cables . Appropriate type test certificate / OEM test report shall be submitted . All above as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR.
-
-
-
Armoured Cable, 4.0 Sq. mm, 2 core
2240
-
-
P & F of IP68, IK10 protected LED Buried marker light /Step Light Fixture. Fixture made of powder coated die cast aluminium with Toughened Glass cover and appropriate beam angle lens to be used as per requirement. The System level Luminous efficacy must be 90 Lumen/W. High Power LEDs at 1W/2W per LED. The driving current should be Minimum 350 mA per LED. CRI70, CCT: 3000/6500 K. The integral SMPS based electronic driver must be constant current and surge protection of min. 4KV(L-N) and efficiency 85%, PF0.9 and input Voltage range of 90-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained. Light should include quick connecting cable coupled with various mounting accessories. Light output in Cool white or Warm White Colour as per engineers choice. Fixture must be in compliance with IS/CE Standards. Burial Light - 5W L-7 MODEL
295
-
-
P & F of IP68, IK10 protected LED Buried marker light / Step Light Fixture. Fixture made of powder coated die cast alluminium with Toughened Glass cover and appropriate beam angle lens to be used as per requirement. The System level Luminous efficacy must be 90 Lumen/W. High Power LEDs at 1W/2W per LED. The driving current should be Minimum 350 mA per LED. CRI70, CCT: 3000/6500 K. The integral SMPS based electronic driver must be constant current and surge protection of min. 4KV(L-N) and efficiency 85%, PF0.9 and input Voltage range of 90-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained. Light should include quick connecting cable coupled with various mounting accessories. Light output in Cool white or Warm White Colour as per engineers choice. Fixture must be in compliance with IS/CE Standards.
Rectanglar LED Marker Light
620
-
-
AIR COOLED DX SYSTEM :
-
-
-
Supply , Installation, Testing and Comissioning of ISO certified company made Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. Min 5 year OEM warranty both compressor and PCB. NABL accredeated as per IS/ISO/IEC 17025 standards / CPRI/ ERDA lab testing reports as per IS 1391(Part-2) 2018 with OEM certificate must submitted to engineer in charge. All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge. For additional technical parameters of products/work , refer Annexure "A" attached with this BSR .
-
-
-
Non Invertor Type
-
-
-
1.8/2.0 TR with 3 star rating of BEE (ISEER not less then 3.5 )
24
-
-
SITC of ISO certified company made air cooled ducted split type air conditioning machine with each having a capacity and details as mentioned below suitable for operation on R-32/R-410A R-407 Green refrigerant comprising of single/twin Scroll / Rotary / Reciprocating type compressor hermatically sealed complete with automatic capacity, safety switches, lubrication system,with min 5 year OEM warranty both compressor and PCB , Suitable capacity squirrel cage induction motor with class 'B' insulation suitable for operation on 415 + 10% volts, 50 Hz, A.C. supply for Blower motor, Necessary drive arrangement for blower motor, Matching Air cooled condenser with necessary fittings for refrigerant piping connections, necessary structural support for mounting condensers, Microprocessor based control panel complete with accessories, machine isolation / disconnect switch, valves and accessories to inter conne ct compressor and condender including pressure testing, vacuum. Necessary starters suitable for Indoor & outdoor unit complete with O/L , U/V, phase reversal protection, single phase preventors etc complete as required. NABL accredeated as per IS/ISO/IEC 17025 standards / CPRI/ ERDA lab testing reports as per IS 1391 with OEM certificate must submitted to engineer in charge. All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
Ductable Split type
-
-
-
11 TR
4
-
-
5.5 TR
1
-
-
DX SYSTEM INSTALLATION:
-
-
-
Supply and installation of copper refrigerant piping of required sizes duly insulated with closed cell elastomeric insulation thickness as specified by manufacturer,as per pipe size and cabling between indoor and outdoor complete with proper supports etc for following capacity unit. All related civil work such as making hole, chasing in wall, shall be inclusive in the quoted price.
-
-
-
1.8 TR WALL MOUNTED UNIT (3-Star Rated), R-32 Gas Inverter/ Non Inverter
290
-
-
11.0 TR DUCTABLE UNIT, R-22 gas, Non Inverter type
165
-
-
5.5 TR DUCTABLE UNIT, R -22 gas, Non Inverter type
20
-
-
Communication cable between IDU & ODU
-
-
-
For Split AC (2.5 Sq mm X 4 C)
360
-
-
For Ducted AC (1.5 sq mm X 8 C)
85
-
-
To supply, install, test and commission PVC drain pipes duly insulated with 6 mm thick nitrile rubber and 'U ' traps from indoor units to nearest drain point.
-
-
-
32 mm dia
35
-
-
25mm dia.
250
-
-
Out door stand for Split Ac (pre fabricated)
24
-
-
Out door stand MS frame for ducted AC
5
-
-
Air Distribution Part
-
-
-
Supply , Installation, Testing and Comissioning of ducting made from GSS of class VIII & fabricated as per IS:655 and as per approved drawings & designs including the cost of hangers, supports, angle, expansion fasteners , closed cell neoprene gasket T&P etc. as required of following gauge:- All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
SITE FABRICATED GI SHEET DUCT
-
-
-
0.63mm (24 G)
250
-
-
0.80mm (22 G)
50
-
-
FLEXIBLE CONNECTION
-
-
-
P & F of Fire retardent , non porous double layer Canvas of required size with GI frame ,Gasket Nut Bolts for air cooling Plants/AHU/FCU etc complete with making connections etc as required All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
5
-
-
GRILLE / DIFFUSER
-
-
-
Supply, installation, testing and commissioning of terminal air distribution equipment as per approved shop drawings, colour and specifications.
-
-
-
Powder Coated aluminium linear grille with aluminium damper.
7
-
-
Powder Coated aluminium linear/square grille without damper.
10
-
-
Volume Control Damper of standard duty flanged style frame dampers with opposed blade linkage drive, made out of 1.0 mm galvanised steel.
5
-
-
Fire smoke damper made of heavy gauge galvanised steel having multi blade construction,90 min fire rating, with UL stamped thermal cut-off with spring return electric actuator motor.
4
-
-
THERMAL INSULATION
-
-
-
ACOUSTIC LINING (DUCTS) :
-
-
-
Supply and fixing of acoustic lining of ducts with following thick, resin bonded glass fibre insulation rigid board with density 48kg/cum fixed in frame work covered with reinforced black fibre glass tissue and finished with 0.50 mm perforated aluminium sheet with 3mm perforation at 6mm center to center fixed with cadmium plated screws etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
12 mm thick fiber glass
50
-
-
Supply & fixing of external thermal closed-cell Nitrile rubber Insulation material FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified 'Class O' in Fire Propagation as per BS 476 Part 6 in form of sheet on duct including cost of adhesive (CPRX Compound) complete as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
9mm thick for indoor Application
250
-
-
UNDERDECK INSULATION (Under roof/ Teen shade)
-
-
-
Supply & installation of following thickness, XPS boards under deck insulation (Density 34 kg/m³ ) in form of sheet and complete in all respects as per specifications and drawings :
-
-
-
25 mm thick
425
-
-
50 mm thick
1
-
-
Supply and fixing duct insulation with 50 mm thick Expanded Polystyrene Thermocol (ESP) sheet of density 24 kg/cu.m after applying two coats of cold setting adhesive (CPRX Compound) and binding sheet with chicken wire mesh and applying 26 G aluminium cladding complete as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work.
1
-
-
Town Hall Electrical
-
-
-
P & F Of Mechanical /digital time switch having following day/week programme and minimum 100 hours reserve and AC 1 rating of 16-20 amperes including making connection
197
-
-
Step Light - 5W
565
-
-
P &L of lP66 protected high power high power LED linear flood light system. Fixture made of powder coated extruded aluminium housing with UV stabilized PC/toughened glass cover and appropriate lens tobe used to achieve various beam angle pattern. fixture suitable for input 12vDC, power consumption should be 6W/0.5A per feet with system CRI- 70, color red/ green / blue/ /RGB /W/WW. the fixture must have IP66 protected 5mm Round female connector for input, the fixture must have provision to extend further . system life of 50000burning hours with 70% of initial lumens maintained . light output in red, green, blue, cool, white or warm white colour as per requirement. fixtures shall be CE complete series of linear flood light.
-
-
-
Linear LED Strip 1 Feet (with Driver)
300
-
-
Linear LED Strip 2 Feet (with Driver)
545
-
-
Linear LED Strip 4 Feet (with Driver)
500
-
-
PVC Wiring Conduit
-
-
-
S&F following sizes (dia.) of ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit as per PWD specification for electrical Works along with its accessories (IS: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. All relative and latest acceptance tests reports by any NABL accredited lab for the conduit shall be submitted before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work.
-
-
-
25 mm
2330
-
-
32 mm
1585
-
-
Providing and fixing of non modular power plug point accessories as per PWD specification for electrical Works with 18 SWG G I box of size 175 x 100 x 60 mm with earthing terminal/connector on recessed/surface with suitable size phenolic laminated sheet (IS : 2036 - 1995) cover including cost of 16 amp. Switch (IS :3854) and 3/6 pin 16 amp. socket outlet [ as per detailed in respective item in BSR], making connection , testing , etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work.
2820
-
-
Earthing
-
-
-
Pipe Earthing as per PWD specification for electrical Works as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work.
104
-
-
Cable & Wiring
-
-
-
P&F of thermoplastic/ PVC cable junction boxes of following sizes including clamps for holding the box, cost of DIN rail for MCB mounting, connectors for cables terminals, threaded cable glands made of polyamide material etc. complete in all respect.
-
-
-
300mm X 200mm X125mm
260
-
-
Labour charges for Excavation of 30cmx75cm size trench in CC road including refilling of excavated earth,compaction of earth, making good the same complete as required .
2240
-
-
Providing & Laying of 25 cm thick layer of river sand to cover of existing cable in 30cmx75cm size cable trench with levelling and making symmetric 25 mm thick layer in complete running length of trench as required.
2240
-
-
Providing & Fixing of following size mounting grid plates with cover plates as per PWD specification for electrical Works, made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/work , refer Annexure "A" attached with this BSR
-
-
-
4 Module
30
-
-
8 Module
20
-
-
12 Module
12
-
-
Providing & Fixing of following size hot dip galvanized M.S. box of 18 SWG as per PWD specification for electrical Works, with earthing terminal in recess/ surface suitable for modular accessories as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
4/5 Module
30
-
-
6/8 Module
20
-
-
10/12 Module
12
-
-
Providing & Fixing of ISO certified company made IK10 IP65 protected Top/Bottom mounted LED Post top Light system. Fixture made of powder coated die cast alluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy ≥ 90 Lumen/W. SMD LEDs is to be used, System CRI70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency 85%, PF0.9, THD20% and input Voltage range of 90-270V AC at 50Hz. System life of 30000 Burning hours with 70% of Initial Lumens maintained Light output in Cool white or Warm White Colour as per engineers choice. driver current 1000mA shown in LM79 report. Fixture must be in compliance with BIS Standards and T.C . Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
30 W LED Post Top Fixture
450
-
-
Town Hall - Electrical Non SOR
-
-
-
Supply, Installation, Testing and Commissioning of Spike Light of 6 Watt and 10 Degree Beam Deflection and 3000 K CCT similar to the Model LLO180 of Make Litomatic
470
-
-
Supply, Installation, Testing and Commissioning of Spike Light of 12 Watt and 10 Degree Beam Deflection and 3000 K CCT similar to the Model LLO181 of Make Litomatic
575
-
-
KL-3286 Alina, COD : Ø75, Wattage : 18W LED. Supply of KL-3286 - 18W LED WW,CW,NW BA:38°, Clear Acrylic C.O.D : Ø75mm ,Alina recess mounted range of LED ceiling lights are a perfect fit for indoor lighting applications. The die cast aluminium housing is ideal for better thermal management. Different wattage & CCT options make this luminaire versatile for superior glare free indoor lighting solutions. Product Description • LED ceiling recessed downlight - Indoor luminaire with uniform light distribution. • Luminaire made of die- cast aluminium for better thermal management. • High efficiency diffuser for glare free uniform light distribution. • Integrated with COB light LED. • High PF 0.9 constant current LED driver with 2.5KV built in surge and thermal protection. • Cable entries for through-wiring of mains supply cable. • Suitable for operation on 240V, 50Hz single phase ac supply. • Ordering guide : KL-3285-CCT ( Colour
210
-
-
KL-4082 Cylin Mini, Dimension : Ø100 x 150, Wattage : 18W LED. Supply of Cylin Mini ID : 4082 LED 3000K, 4000K 240Vac CRI 80 MacAdam step 3 Input power : 18W Dimension Ø100 x 150mm Beam angle : 15° / 25° / 40° Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Ceiling Mounted Down Light. IP rating IP65 MATERIAL CHARACTERISTICS Extruded aluminium pipe (grade 6063 with test certificate) Ø100 x 2.5mm thickness & cast aluminium plate for surface mounting on ceiling (grade ADC12 with test certificate). SS fasteners. Silicone gasket. Mechanical resistance IK07. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. LIGHTING PERFORMANCE Hybrid optics with lens & reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Clear touchened glass diffuser of 4mm thickness with controlled downward light emission. Lamp fixed position CYLIN MINI This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 85%, power factor 0.95, THD 10%, Surge protection 3KV.
45
-
-
Providing and Fixing Panel Light for Celling 595x595 (48 Watt) complete as per standard spesification, as per Direction of Engineer in charge.
15
-
-
Security works
-
-
-
SITC of 1/3" CCD camera (Ceiling or Wall Mounted ) with night vision of sony chip having resolution of 400 mpx with 21 IR LED capture/electronic eye/advert. 10 mtr. Range
14
-
-
Supply, installation and commissioning of Remote compact keyboard, variable speed, Joystick Control, for DVR.
1
-
-
Supply, installation and commissioning of 16-Channel Video, 1-Ch audio Embedded DVR, Each DVR with 400ips display and 400 ips recording, 1TB HDD built, CDRW, PAL, capable of 8 Internal HDD's.
1
-
-
Supply, Installation and commissioning of 21" Color Monitor
1
-
-
Suppy, Installation, testing, commisioning, training, and maintance of WALK THROUGH DOOR FRAME METAL DECTACTOR. As per sspecifications.
1
-
-
Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessorry tools for punching, stripping, crimpping and testing required.
560
-
-
Public address system
-
-
-
Full range surface mount loudspeaker with frequency response of 80Hz to 17kHz; power handling of 40W; Nominal dispersion of 125H X 125V; Sensitivity of 87 db SPL and Max SPL of 103 db SPL; Transformer tapping can be done. Brackets included. Bose Ds40SE
10
-
-
Frequency Response (+/-3 dB)
45 – 180 Hz
Frequency Range (-10 dB)
37 – 270 Hz
Nominal Dispersion
Omnidirectional below 200 Hz
Sensitivity (SPL / 1 W @ 1 m)
90 dB Maximum SPL @ 1 m
117 db (123 db peak)
Long-Term Power Handling
500 W (2000 W peak)
Nominal Impedance
8 ohms : Bose AMU 210
1
-
-
2x4 Signal Processor with 2 analog balanced differential input; 4 analog balanced differential output with programable custom pages like seminar / presentations / cultutal events / conferences etc as per site requirements ; custom channel routing; crossovers, limiters, gain control; band pass filters; delays; limiters; gain and signal polarity. Bose SP 24
1
-
-
Power Amplifier Maximum Rated Power: 2 x 1000 W (THD+N 0.04%, 1 kHz, 4-8 Ω , 70/100V) Bose Powershare 21000
1
-
-
Professional Media Player ( Gemini CDMP 1500)
1
-
-
10Channel Analog Mixer ( Yamaha MG10 )
1
-
-
Speaker Cable ( Krystal 1.5Sqmm ) - 100
Meter Spool Bundle
3
-
-
Connectors ( Krystal )
1
-
-
VAK make decorative haritage pole in 4 Meter height. Pole upper section of length 3mtr is of dia 76mm and 1 meter bottom section of dia 114mm with decorative casting with base plate as per drawing. Provision for inside termination box with 4way connector & 1nos 6 AMPS MCB for local isolation with cover.Complete in all aspects with foundation bolts
525
-
-
Wiring of light point/ fan point/ exhaust fan point/ call bell point as per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked ( IS:9537 P - II ) rigid steel conduit & it's all accessories, round tiles, Hot Dipped Galvanized Modular Box of 18 SWG with earth terminal, 6 A Modular switch,3
pin ceiling rose / lamp holder/ 3 point connector ,Modular face plate with grid plate, pvc bushes, check nuts, screws etc, all as per pre approved by Engineer in charge, making connections, testing etc. complete as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 . For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
Short Point (upto 3 metres)
15
-
-
Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm. FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS: 694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it’s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. On Board Gr. - I.
1
-
-
Providing & Fixing of ISO Certified company made BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan as per PWD specification for electrical Works, Conform to all the performance requirements laid down in IS:374-2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) or Quality Certification such as ISO - 9001 or above. with down rod up to 30 cm with secondary support safety cable ( steel wire ) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. Appropriate OEM test certificate shall be submitted by contractor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
1200 mm Sweep BEE 3 Star rated (service value =5.0 to 5.5 )
3
-
-
Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency 85% , with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD 10 % , p.f.≥0.95,CRI 80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.
-
-
-
OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer Annexure "A" attacheded with this BSR.
-
-
-
Suspended Mounting/Surface Moutning
-
-
-
36W LED light fixture 2'x2' with acrylic / prismatic front cover.
2
-
-
Nehru Park Electrical works
-
-
-
Providing & Fixing of IK07 IP 66 protected LED Street Light
Luminaire on existing bracket/pole. Fixture made of powder coated
single piece pressure die cast aluminum LM6/ ADC12 material with
heat dissipation fins on housing with UV stabilized PC/Toughened
Glass cover (UV stablzation report submitted for UV cover ) and
secondary lens on each LED & should be SMD type . The System
level Luminaire efficacy =120 lm/ wt with High Power LEDs is to be
used and potted driver must be potted & has a unique BIS R
number with Input Voltage AC 120 to 270 V AC with High voltage
Cutoff @=300 V AC and Auto resetting Safety ,Input Frequency
50Hz±3% Power Factor 0.95 driver Efficiency 85% ,THD(I)
10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver
current 1000mA shown in LM79 report. The luminaire shall be BIS
certified and T.C. certified. Life Expectancy Equal or more than
50000 burning hrs with Minimum 70% lumen maintened ,color
Rendering Index 70 and CCT 5700K +355K. Surge protection shall
be min ≥ 4 KV internal and min 10 KV external. driver should be
Phase to phase protection of 440 V for 4 Hrs. Manufactures Word
Mark/Name Engraved/Embossing on die cast housing to allow
traceability/authenticity. Fixture shall be AS PER IS 10322
Complianced.
OEM Must have its own in house NABL lab setup for all testing
facilities for LED fixtures. (LM79/LM80) Certificate/ report with
liable warranty of product/accessories from OEM shall be submitted.
All as per pre approved by Engineer in charge. For additional
technical parameters of products/ work
-
-
-
LED Street Light fixture 30 Watt
75
-
-
Cable & Wiring
-
-
-
Providing and fixing flexible 20 mm dia PVC conduit 2 MM thick including all necessary supports, clamps, jointing pieces etc for drop of wire/cable from slab / wall.
16
-
-
Part C- Provisional Sum
-
-
-
Provision of Provisional sum to be used as tender document (fixed) : INR 50,00,000. Bidder should fill amount INR 50,00,000.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements