Rajasthan Urban Drinking Water Sewerage And Infrastructure Corporation Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 1,22,400Document Cost
₹ 1,000Tender Fee
₹ 1,500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_RUDSI_411440_1Tender No
NIT 03/2024-25Tender Authority
Rajasthan Urban Drinking Water Sewerage And Infrastructure Corporation ViewPurchaser Address
-Website
http://https://urban.rajasthan.gov.in/content/raj/udh/rudsico/en/home.html.html
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.
1: 3: 6 or richer mix.
37.5
-
637
... More
Carriage of Building Rubbish Stone metal (Grit and ballast etc.) including loading, unloading complete with a lead for 10 Km
67.5
-
165
... More
Taking out doors, windows and clearstory windows shutters (steel or wood) including stacking within 50 meters lead:
Of area 3 square meter and below.
25
-
42
... More
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead :With cement mortar 1 :4 ( 1 cement : 4 coarse sand)
752.5
-
235
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 15 mm nominal outer dia pipes
100
-
279
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20 mm nominal outer dia pipes
504
-
289
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 50 mm nominal outer dia pipes
155
-
757
... More
P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:
-
-
-
... More
500 litres capacity
4
-
3920
... More
1000 litres capacity
6
-
7841
... More
P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.Not less than 400 gm, 20mm.
10
-
372
... More
P & F Gun-metal Non-return Valve or Check Valve (IS :Make) of approved make, superior quality:40mm nominal bore horizontal.
10
-
970
... More
Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge Bib Cock with long thread 15 mm nominal size
50
-
823
... More
Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge Long body Bib Cock 15 mm nominal size
25
-
1084
... More
P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection. Inlet connection 15mm.Brass (IS : 8931 marked) with 37 cm long pipe and nut.
120
-
590
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia
260
-
336
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make
-
-
-
... More
Coupler (socket)
-
-
-
... More
110mm dia
50
-
108
... More
Single Tee
-
-
-
... More
110mm dia
50
-
210
... More
Bend 87 .5
-
-
-
... More
110mm dia
45
-
155
... More
Pipe Clip
-
-
-
... More
110mm dia
100
-
31
... More
Nahni Trap with Jali 4”
25
-
171
... More
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 4 (1 cement : 4 coarse sand)
18
-
5196
... More
Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. South Zed Black Above 3601 Cm2 Slabs
40
-
4076
... More
Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone minium 30 mm thick
60
-
609
... More
P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mm
70
-
911
... More
Providing and fixing 1st quality standard Marble printed/
Granite Shade or Light/dark shad glazed tiles confirming to IS
: 13753 & IS :15622 of size 300mm x 600mm in walls, floors,
steps, pillars etc. laid on a bed of neat cement slurry-finished
with flush pointing in the white cement mixed with pigment to
match the shade of the tile complete (excluding the cost of
cement plaster on walls and pillar).
631.8
-
1003
... More
Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).Size 300mm x 450mm
205.2
-
809
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
130
-
111
... More
Plaster on new surface on walls in cement sand mortar 1:4 including racking of joint etc. complete fine finish :20mm thick.
200
-
202
... More
Removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandla/loi and all scaffolding (for colour changing only)
6800
-
4
... More
Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats)
1632.5
-
84
... More
Finishing walls with textured exterior paint of required shade
as per approved colour complete as per manufacturers
specifications including primer coat and protecting coat
including scaffolding and safety provision .Trowel Finish av. thickness 1500 to 2000 microns.
200
-
404
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.
6905
-
80
... More
Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete.
12
-
825
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :One or more coats on old work.
346.4
-
69
... More
Painting exterior surface of Wall with 100% acrylic exterior
paint of approved brand and manufacture to give an even
shade with two or more coats including prepartion of base
with sand papering, primer, putty, etc complete in all respect
including scaffolding and safety provision
1500
-
123
... More
Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion Powder coating aluminum ( minimum thickness of powder coating 50 micron)
150
-
351
... More
For shutters builtup standard tubular sections of openable
doors ,windows & ventilators including providing & fixing
hinges / rollers etc. and making provision for fixing of
fittings wherever required (lockes shall be paid for
separately). Powder coating aluminum ( minimum thickness of powder
coating 50 micron)
80
-
381
... More
Providing & Fixing Aluminium composite panel of indo bond/euro/flexi bond of equivalent made 3mm that with 0.5mm thick skin& PVDF coated of approved shads for toilet door in double layer in Aluminium frame complete in all respect as per sample approved by Engineer in Charges.
70
-
929
... More
Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Prelaminated particle board with decorative lamination on both sides.
27.63
-
1092
... More
Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)With float glass panes of 4.0 mm thickness ( weight not less than 13.50 kg/sqm)
95
-
791
... More
Renewing glass panes with wooden fillets wherever necessary :
-
-
-
... More
Float glass panes of thickness 4 mm in windows
30
-
765
... More
P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the Size 550 mm x 400 mm dia for counter top
26
-
2994
... More
Size 400 mm x 400 mm or 450 mm x 390 mm Corner
2
-
2232
... More
Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap
26
-
286
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
20
-
4595
... More
P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.
20
-
381
... More
P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. Other sizes
15
-
1538
... More
Providing and applying Melamine polish on teak wood work of approved brand and manufacture to give an even shade with two or more coats by compressor including sand papering, wood filler coat etc complete in all respect: Old Surface
18.9
-
606
... More
Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
600
-
96
... More
Extra if square,rectangular hollow tubelar sections are used or grill made by flats only
1200
-
9.6
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required.
-
-
-
... More
0.80 mm thick with zinc coating not less than 275 gm/m2
30
-
765
... More
P & F Indian type white glazed vitreous china 1 st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor:Size 530x410mm
6
-
2640
... More
Providing & fixing calcium silicate perforated ceiling tiles of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge of thickness of tiles as mentioned below:- 8mm thick
160
-
989
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
-
-
-
... More
M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)
4.5
-
4915
... More
M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
30
-
3847
... More
Providing and fixing vertical Blinds , headrail shall be oriented aluminum alloy 50 mm wide x 18 mm high the thickness shall be 1.2 mm. Control unit shall be made of high grade polymer and shall be housed in side the headrail, which shall transfer motion from chain tilter to tilt rod. Chain tilter shall be made of plastic bead of diameter 4.5 mm through which 2 mm thick polyester code passes. Tilt rod shall be extruded aluminum having 3 key ways. Runner shall be moulded plastic and shall have to plastic wheels mounted on plastic exles to enable runner to slide unhindered in headrail. Luver shall be made of fabric 100 mm colour fast and shall have protective scotchgard coating to resist stains and dust. Bottom mechanism consist bottom weight made of powder coated galvanized steel for maximum corrosion resistance. The bottom weight shall be attached with bottom.
27
-
1623
... More
Dismantling stone slab/ terrazo chip flooring laid in cement
mortar including stacking of serviceable material and disposal
of unserviceable material within 50 meters lead.
450
-
80
... More
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix
1.8
-
4934
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix
2.7
-
5609
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786Thermo-mechanically Treated bars (Conforming of relevent IS
code)
450
-
77
... More
Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' :25 mm thick .Decorative teak veneer One side
151.2
-
1894
... More
Extra for providing vision panel not exceeding 0.1 Sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured)
72
-
128
... More
Providing & Fixing of ward robe shutters made out of 19mm thick BWP block board ISI of superior quality make with following details :- Front side finishing with 1mm thick superior quality mica approved make and 0.8mm thick approved shade mica in the inner side. Covering with teak wood beading 25x12mm all the sides of shutter & 35x12mm on outer frame for making good the wall joint including heavy brass S.S. fittings (Handle 200mm 2 Nos., Tower Bolt 150mm 2 Nos., Brass Lock 1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75x40x2.5 mm 6 Nos., SS Hanger Rod 20mm dia) complete as per drawing and design approved by Engineer in Charge.
57.6
-
5571
... More
Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 0.6mm thick mica
90
-
627
... More
Providing and laying water proofing treatment in sunken
portion of WCs, bathroom etc., by applying cement slurry
mixed with water proofing cement compound consisting of
applying : (I) first layer of slurry of cement @ 0.488 kg/sqm mixed with
water proofing cement compound @0.253 kg//sqm .This layer
will be allowed to air cure for 4 hours.
( II) Second layer of slurry of cement @ 0.242 kg/sqm mixed with
water proofing cement compound @ 0.126 kg/sqm This layer
will be allowed to air cure for 4 hours followed by water
curing for 48 hours. The rates includes preparation of surface
treatment & sealing of all joints ,corners, junction with
polymer mixed slurry.
250
-
275
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/ltr and viscosity 70 - 160 cps. over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick
80
-
507
... More
P.T.M.T. Liquid Soap Container of 400ml capacity
26
-
135
... More
Labour charges for removing and refixing of urinals (all type & sizes) including all necessary fittings
26
-
339
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.
20
-
8580
... More
Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
... More
Full Edge moulding
100
-
233
... More
Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil.
12
-
175
... More
Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:4 ( 1-Cement : 4-Sand).
8
-
3182
... More
Spray painting in approved shade and approved quality with Duco paint of required colour to give even shade with two or more coats by compressor including sand papering, NC putty filler coat etc complete in all respect as per design given by Engineeer incharge on new work.
18
-
1859
... More
Providing & fixing S.W. square mouth Gully trap `A` grade
(IS 651-1992 marked) of approved make & design in existing
man-hole.
Size 100 X 100mm
20
-
182
... More
EXECUTIVE MEDIUM BACK REVOLVING OFFICE CHAIR
Providing & Fixing of Executive medium back revolving chair having following specification : Seat/Back, Assembly: The seat/Back are made up of 12mm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra confort.
Back Size :520mm (W) × 580mm (H)
Seat Size :460mm (W) ×470nn (D)
Overall Height : 1080mm Polyurethane Foam : The polyurethane foam is moulded with density = 45+2kg/m3
Upholstery : Fabrick/Leatherette Arm rests: The one-piece of armrest in "D" shape made up of Polypropylene sample and color to be approved by Engineer-in-charge
16
-
9570
... More
Work Station Providing and fixing of computer table for computer room the sitting arrangement 12 operator working table widht 600 mm wall to wall 3 sight fixing to wall & 2 corner round shape made out of 18mm ply ISI BWP waterproof and acidproof and equalant make and 1mm thick mica at Top and inside, front having combination pattern the top thick 38mm and top edge teak wood biding decorative one Nos drawer and 1 Nos key board or CPU arrangement As per separate person with channel complete melamine polish sample and color to be approved by Engineer-in-charge. Top width 600 mm×Hight 760mm
15
-
9040
... More
Wiring of light point/ fanpoint/ exhaust fan point/ call bell point as per PWD specification for electrical Works with ISI marked 1.5sq.mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1kV grade (IS:694) and 1.5sq.mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1kV grade (IS:694) in recessed ISI marked (IS:9537P-II) rigid steel conduit & it's all accessories, roundtiles, Hot Dipped Galvanized Modular Box of 18 SWG with earth terminal, 6A Modular switch, 3pin ceiling rose/ lamp holder/ 3point connector ,Modular face plate with grid plate, pvc bushes, checknuts ,screws etc, all as per pre approved by Engineer in charge, making connections ,testing etc. complete as required. For specification of copper Conductor ,Phenolic Laminate dsheet's &Electrical/ Wiring accessories refer ChapterE-04, E-05 &E-07 For addition altechnical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
Short point upto 3 mtr.
30
-
245
... More
Medium Point upto 6 mtr.
15
-
370
... More
Long Point upto 10 mtr.
5
-
478
... More
P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. 380 mm sweep(900/1400 RPM)
10
-
3088
... More
Providing & Fixing of ISO Certified company made BEE Starrated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan as per PWD specification for electrical Works, conforming to IS:374-2019, & IS:1885-P-V-1981. with down rod upto 30 cm with secondary support safety cable (steelwire), cotterpin with 3x1.5sq. mm pvc insulated flexible copper conductor making connection testing etc. as required. Appropriate OEM test certificate shall be submitted by contractor. All as per preapproved by Engineer incharge. For additional technical parameters of products/ work,referAnnexure"A"attachedwiththis BSR .1200 mm Sweep BEE 2 Star rated (service value= 4.5 to 5
2
-
1482
... More
Providing & Fixing of IP40 LED Recessed/ Surface Mounted, Round/ Sqaure Non-Dimmable Backlit SMD Mid Power LED Downlight with die-cast aluminum housing & Heat Sink for heat dissipation with UV Stabilized non yellowish Diffuser with internal/ external BIS complience 2.5KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency85% and in compliance to IEC standards. System Lumen efficacy of≥120lm/ watt, THD10% ,p.f.≥0.95 CRI80, life time of minimum 50000 Burning Hours with, 70% of intial Lumen maintaned till life ends, CCT 3000°K/ 4000°K/ 5700°K/ 6000°K/ 6500°K (AsperANSIBin), maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate(T.C.) .Manufactures WordMark/ Name Engraved / Embossing/ Screen printing on housing. Recessed Mounting LED Downlight 9/10W
15
-
577
... More
Providing & Fixing of IP40 LED Recessed/ Surface Mounted, Round/ Sqaure Non-Dimmable Backlit SMD Mid Power LED Downlight with die-cast aluminum housing & Heat Sink for heat dissipation with UV Stabilized non yellowish Diffuser with internal/ external BIS complience 2.5KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency85% and in compliance to IEC standards. System Lumen efficacy of≥120lm/ watt, THD10% ,p.f.≥0.95 CRI80, life time of minimum 50000 Burning Hours with, 70% of intial Lumen maintaned till life ends, CCT 3000°K/ 4000°K/ 5700°K/ 6000°K/ 6500°K (AsperANSIBin), maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate(T.C.) .Manufactures WordMark/ Name Engraved / Embossing/ Screen printing on housing. Recessed Mounting LED Downlight 14/15W
15
-
707
... More
Wiring of light point/ fanpoint/ exhaust fan point/ call bell point as per PWD specification for electrical Works with ISI marked 1.5sq.mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1kV grade (IS:694) and 1.5sq.mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1kV grade (IS:694) in recessed ISI marked (IS:9537P-II) rigid steel conduit & it's all accessories, roundtiles, Hot Dipped Galvanized Modular Box of 18 SWG with earth terminal, 6A Modular switch, 3pin ceiling rose/ lamp holder/ 3point connector ,Modular face plate with grid plate, pvc bushes, checknuts ,screws etc, all as per pre approved by Engineer in charge, making connections ,testing etc. complete as required. For specification of copper Conductor ,Phenolic Laminate dsheet's &Electrical/ Wiring accessories refer ChapterE-04, E-05 &E-07 For addition altechnical parameters of products/ work , refer Annexure "A" attached with this BSR .. On board
10
-
253
... More
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130:2013 of 1.1kV grade. Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss, oxygen free (10ppm) for less chances of oxidization and higher silver content for gives better conductivity, insulation PVC typeA, flame retardant as per IS10810-53, better amper age rating as per VDE 0298 part4,, in existing surface or recessed PVC/MSconduit/casing capping including all as per pre approved by Engineer in charge, making connections, etc.as required. OEM Must have its own in house NABL lab set up for all testing facilities for wires. For additional technical parameters of products/ work,refer Annexure"A" attached with this BSR
-
-
-
... More
3 x 1.5 sq.mm
300
-
37
... More
2x 2.5 sq.mm+1 x 1.5 sq.mm
100
-
51
... More
2 x 1.5 sq.mm
100
-
25
... More
Providing & Fixing of IP40 LED Surface Recessed/ suspended mounting Mid power SMD type LED Light fixture made from CRCA sheets teel housing, high purity/ transmisivity UV stabilized Non-yellowish diffuser for uniform light distribution. High efficiency with 2.5KV internal/ external surge protection BIS certified isolated driver having efficiency85%, with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of≥120lm/ Watt, THD10% ,p.f.≥0.95, CRI80, life time of minimum 50000 Burning Hours with, 70% of intial Lumen maintaned til llife ends, CCT3000°K/ 4000°K/ 5700°K/ 6000°K/ 6500°K (AsperANSIBin), maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate (T.C.). Manufactures WordMark/ Name Engraved/Embossing/Screen printing on housing. Suspended Mounting/Surface Moutning 48W LED light fixture 2'x2' with acrylic / prismatic front cover.
6
-
3436
... More
Providing & Fixing of modular type switch/ bell push duly ISI marked (IS:3854) as per PWD specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminal sand captive screws & silver alloy contact tip with IP-20 rating, minimum width of 1 modules witch toggle (PUSH PART) should not less then 20mm,including all as per pre approved by Engineer incharge, making connections, testing etc. as required. All as per pre approved by Engineer incharge. For additional technical parameters of products/ work, referAnnexure"A"attached with this BSR 6 A one way switch
-
-
-
... More
6 A one way switch
70
-
52
... More
16 Amp. 1 Module switch With Led Indicator
30
-
107
... More
16 Amp. Socket
40
-
133
... More
6 A 3 pin shuttered socket
30
-
88
... More
Providing & Fixing of following modular accessories as per PWD specification for electrical Works ,made out of unbreakable and fire retardant vergin polycarbonate with brass terminal sand captive screws & silver alloy contact tip with IP-20 rating, minimum width of 1 modules witch toggle (PUSHPART) should not less then 20mm, including all as per pre approved by Engineer incharge ,making connections, testing etc.as required. All as per pre approved by Engineer incharge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .
-
-
-
... More
2 pin Telephone socket
12
-
105
... More
RJ-45 computer jack with shutter
10
-
208
... More
RJ-11 telephone jack single two line
10
-
72
... More
Providing & Fixing of following size hot dip galvanized M.S .box of 18 SW Gas per PWD specification for electrical Works ,with earthing terminal in recess/ surface suitable for modular accessories as required. All as per pre approved by Engineer incharge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .
-
-
-
... More
4/5 Module
50
-
87
... More
Providing & Fixing of following size mounting grid plates with cover plates as per PWD specification for electrical Works ,made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect. All as per pre approved by Engineer incharge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .
-
-
-
... More
5 Module
50
-
79
... More
S&F following sizes (dia.) of ISI marked MMS (IS:9537P-III) vergin material PVC conduit as per PWD specification for electrical Works along with its accessories (IS:3419) as required inrecess including cutting the wall, covering conduit and making good the same as required. All relative and latest acceptance tests reports by any NABL accredited lab for the conduits hall be submitted before execution & All as per pre approved by Engineer incharge. For additional technical parameters of products/work,referAnnexure "A" attached with this BSR .
-
-
-
... More
25 mm dia
600
-
37
... More
Supply, Drawing and Testing of 4 pair ,23AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, ClassE, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/ TIA/ EIA-568, The copper conductors should be balanced twisted in pairs ,seperated by across-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies upto 250 Mhz .in existing MS/ PVC Conduits/ casing capping including making connection to Information outlet sand Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect.All as per pre approved by Engineer incharge. For additional technical parameters of products/ work, refer Annexure"A" attached with this BSR .
100
-
31
... More
Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps . Integrated driver must be potted & has a unique BIS R number shall be high efficiency having efficiency more than 85 % and in compliance to BIS certified and T.C. certificate. The System level Luminaire efficacy =120 lm/ wt with High Power LEDs is to be used . LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @=300 V AC and Auto resetting Safety . Input Frequency 50Hz±3%, Power Factor 0.95 ,driver Efficiency 85% , THD(I) 10% , driver current 1000mA shown in LM79 report. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector Must be provided, Surge Protection Min =4KV internal and 10KV external, System life of 30000 Burning hours with 70% of Initial Lumens maintained, color Rendering Index 70 and CCT 5700K ±355K. Driver current 1000mA shown in LM79 report. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . High Power LED Flood Light 50W
2
-
4395
... More
Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un armoured / Armoured aluminium cable of 1.1 KV grade as per PWD specification for electrical Works in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench with filling of excavated earth in trench , on existing cable trays or on surface etc. including making necessary connection, testing etc. as required of size and as per points (a), (b), (c), mentioned below:- (a) Material :- H4- Grade aluminium conductor of purity 99.6 % & as per IS:1554 P-I / IS :7098 P – I (b) conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999 for armouring of cables in armoured cable items , IS 5831 for sheath, IS 10810 (Part 0 to 64 ) for testing procedures. (c) OEM Must have ISO 9001 & 14001 certifications for quality assuarance & its own in house NABL lab setup for all testing facilities for cables . Appropriate type test certificate / OEM test report shall be submitted . All above as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR.10.0 Sq. mm ,3 core
30
-
66
... More
SITC of IP-42 and general construction confirming to IS:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and Other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-
-
-
-
... More
(a)Thickness of CRCA sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. Removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided
-
-
-
... More
(b)complete panel shall undergo a process of degreasing, Water rinsing, Activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then Powder coated with approved shade of minimum 70 microns on both side of panel. The panel having PE foam/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.
-
-
-
... More
[c) Interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (63 amp ) . control wiring will be carried out with 1.5 Sq.mm, Earth wire with 2.5 Sq.mm and CT with 2.5 sq.mm flexible copper wire only. All joints / interconnections of copper bus bar shall be dully tinned . Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves . Earth and Neutral bus bar shall be half of the size of phase bus bar. ( Cost of Bus bar / Flexible wire for Interconnection between Main busbar and Switchgear is to be Paid Extra )
-
-
-
... More
(d)Wiring between components within switchgear and Incoming / outgoing cable shall be done through the terminal block only. Direct connection shall not be permitted. Each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. For tap-offs, adjacent terminals with shorting strips shall be used. 10% Spare terminal blocks shall be provided. Wire identification on marking strip shall correspond to the designation of the wiring diagrams. All wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.
-
-
-
... More
(e)All wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, Wiring between terminals of various devices shall be ‘point to point’ (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.
-
-
-
... More
(f)Floor mounted panel shall be mounted on Base frame of ISMC channel size 100 x 50 x 5 mm ( to be paid Extra )
-
-
-
... More
(g) Tests: The insulation resistance (with 1000 V Megger) and High voltage Power frequency test (by applying a voltage of 2.5KV for one minute) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. The insulation resistance shall not be less than three megaohm. CT Secondary current injection test shall also be carried out.
-
-
-
... More
(h) only outer surface area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator only (CPRI Test certificates to be submitted)All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
2
-
5975
... More
Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2) / Copper (IEC 60028) bus bar by means of SMC / DMC type insulator with standard short circuit withstand capacity , high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .Electrolytic grade Aluminium bus bar 6010 grade
5
-
542
... More
Providing & Fixing of IS: 13875 & IEC :61326 confirming LED Digital type (up to 500) V range Volt meter / Direct- Ammeter / CT oertated ammeter/ Frequency meter / KWH meter / Multi Function Meter / Power analyzer of class 1 accuracy as per IS : 1248 of size 96mm x 96 mm including making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
Three phase Ammeter with Inbuilt Selector Switch
2
-
1689
... More
Three phase Voltmeter with Inbuilt Selector Switch
2
-
1689
... More
Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) on surface ISI marked ( IS:14927 P - II ) virgin material UPVC Trunking & it's accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal/ Surface Moulded virgin material UPVC Modular Box, modular 10A switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. Medium point (up to 6 mtr.)
6
-
584
... More
S&F following sizes of ISI marked ( IS:14927 P - II ) virgin material UPVC trunking along with accessories like coupler, inner, outer, elbow, square box, tee, end cap etc. on surface with screws, expansion fasteners as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR.32 mm x 12 mm
50
-
64
... More
Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR.Double pole MCB(With B/C curve tripping Characteristics).80 A rating
2
-
3392
... More
SITC of 3 /4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR.3 pole MCCB With Thermal Magnetic release.125 Amp , 25 kA, adjustable O/L & adjustable S/C setting,
2
-
6387
... More
Supply , Installation, Testing and Comissioning of ISO certified company made Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, aircirculation of following capacity with Scroll / rotary compressor. Min 5 year OEM warranty both compressor and PCB. NABL accredeated as per IS/ISO/IEC 17025 standards / CPRI/ ERDA lab testing reports as per IS 1391(Part-2) 2018 with OEM certificate must submitted to engineer in charge. All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .Invertor Type
-
-
-
... More
1.5 TR with 3 star rating of BEE (ISEER not less then 3.5 )
5
-
47220
... More
1.8/2.0 TR with 3 star rating of BEE(ISEER not less then 3.5 )
3
-
61693
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements