Rajasthan Urban Drinking Water Sewerage And Infrastructure Corporation Tender

Rejuvenation and water conservation of Pratap Sagar at Nagaur

Providing & Fixing of Double Swing Arihant's Model PGSW 04 or equivalent Product Area : 3m x 2.5m (10ft x 8.2ft) Safe Play Area : 4.2m X 2.5m (13ft X 11.5ft) Ideal For : 4-14 Years Friends at a time : 2 Its total required area 3 mtr. X 2.5 mtr. And height shall be 2.4 mtr. From ground level top bar of swing is made by 80mm IDGI pipe. And 4 nos. of leg support pipe should be 60mm IDGI pipe. Top bar attach with 2 nos. of alloy steel coasting bearing with GI chain. Seating arrangement of swing is made up of 10mm thick. Anti skid chequered reinforced rubber belt. Bearing should be covered by specially design nylon clamp. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C. base system as per order by engineer in charge

Providing & Fixing of Elephant see-saw Arihant's Model PGSS 06 or equivalent Product Area : 0.4m X 0.75m (1.3ft X 2.4ft) Safe Play Area : 1.4m X2m (4.5ft X 6.5ft) Ideal For : 3-8 Years Friends at a time : 2 This innovative see saw is an exciting product, which provides unlimited fun to the children playing on it. The Elephant is made up of PP sheet of 12mm thick. The seating arrangement is also made up of FRP sheet of 3mm thk. The handles for gripping are made up of S.S material. The frame is made from 25 x 50 x 1.6 mm thk rectangular tube. Rubber padding is fixed at the bottom end of the tube to absorb the ground impact. The Elephant are mounted on a pair of heavy-duty compression spring. The dia of the spring rod is 20mm. The spring is mounted on 5mm thick plate. And the stand for support is made out of 50MM NB powder coated GI pipes. For a good foundation, M.S. angle of size 25 x 25 x 5 mm thk are provided. Special end caps are used to cover the nuts bolts so that no injury is caused to the child.

Providing & Fixing of Tiny See-Saw Arihant's Model PGSS 09 or equivalent Product Area : 1.3m x 0.5m (4.3ft X 1.6ft) Safe Play Area : 2.3m x 1.5m (7.5ft X 5ft) Ideal For : 1-3 Years Friends at a time : 2 This innovative spring see saw is an exciting product, which provides unlimited fun to the children playing on it. The seating arrangement is also made up of FRP sheet of 3mm thk. The handles for gripping are made up of S.S material. The frame is made from 25 x 50 x 1.6 mm thk rectangular tube. Rubber padding is fixed at the bottom end of the tube to absorb the ground impact. The dia of the spring rod is 20mm. The spring is mounted on 5mm thick plate. And the stand for support is made out of 80MM NB and leg support should be 50MM NB. powder coated GI pipes. For a good foundation, M.S. angle of size 25 x 25 x 5 mm thk are provided. Special end caps are used to cover the nuts bolts so that no injury is caused to the child.

Providing & Fixing of a Playsets Arihant's Model Theme MAPS T22 or equivalent Product Area : 7.9m x 4.8m (26ft x 15.7ft) • Safe Play Area : 9.9m x 6.8m (32.5ft x 22.5ft) Age Group : 2-5 yrs Friends at a time : 15 Platform Height : 3ft & 5ft (1)PLATFORM The platform is made in Fiber reinforced plastics with anti skid surface giving ,it is a smooth finish so that the child does not slip while walking on it . Each of the side should be 1.16 m x 1.16 m .The innovative Frog canopy and poll leaf at the top of the deck is made up of Fiberglass reinforced plastic which gives aesthetic look to the MPPS. (2).PLATFORM WITH POLL LEAF (1.5 MTR) The platform is made in Fiber reinforced plastics with anti skid surface giving, it is a smooth finish so that the child does not slip while walking on it . Each of the side should be 1.16 m x 1.16 m .The innovative Frog canopy and poll leaf at the top of the deck is made up of Fiberglass reinforced plastic which gives aesthetic look to the MPPS. (3).FRP STAIRCASE The FRP staircase is made up of Fiber Reinforced plastic with a conservative thickness of 4 mm. Ladder should have Reinforcement to maintain strength and avoid bending. The top surface of the ladder should be such that it should not deserve any kind of skidde (4).WIDE STAIRCASE WITH RAILING :- The wide staircase is made up of Fiber reinforced plastic with thickness of 4 mm. The railling will be made from 20 NB GI pipe. The railling is attached to the deck with the help of 80 x 20 NB GI nylon clamps. The railing will be powder coated to avoid rusting. There is a FRP Lotus & SUNFLOWER is affixed to the deck pipe with the help of 20 NB GI pipe. (5). MINI WAVE SLIDE WITH SLIDE ENTRY ;- The centre support of the mini wave slide is made up of 50 NB GI pipe .The slide portion is made in glittering FRP material . The thickness of the mini wave slide is 4 mm with proper reinforcement to support the module; the landing support is made made up of 25 NB GI pipes. All the sharp edges and corners grinded to give smooth finish so that children are not hurt while playing the pure polyester powder coating done on the pipes extends the life of equipment . There is also FRP slide entry. (6). FROG RAILING :- The FRP Frog railing is provided for the deck for safety purpose And it is made of reinforced plastics. It is attached to the deck pipe with the help of 80 NB GI nylon clamps. The support pipe is powder coated to avoid rusting of the pipe. (7) SPIRAL SLIDE:- The spiral slide is made up of Fiber Reinforced Plastic (FRP) in one piece having shell thickness of 3-4 mm. The slide is supported on a center support 80 NB GI pipe. The landing supports of the slide are supported by two 20 NB pipes (8). CROSS –N- ZERO :- This item provides brain washing experience to the children and enhances their technical strength by providing them an intelligent game. The prisms for the “x” and “o” of this item are made made out of molded plastics while the frame is made out from LLDPE in roto molded. The prisms are fixed on powder coated GI pipe frame of 20 NB GI and 15 NB GI pipes. The cross n zero attached to the deck pipe with the help of 80 NB nylon clamps. (10). FRP DOLPHIN /LOTUS/ SUNFLOWER / BUTTERFLY:- The dolphin is made from fiberglass reinforced plastics. The dolphin is mounted inside 20 NB GI pipe. The character is attached to etc. Complete as per directions of the engineer Incharge.

Providing & Fixing of a Playset Arihant's Model ROTO MAPS R06 or equivalent Product Area : 8.2m x 5.6m (27ft x 18.4ft) Safe Play Area : 10.2m x 7.5m (33.4ft x 24.6ft) Age Group : 8-12 yrs Friends at a time : 15 Platform Height : 3ft & 5ft

Providing & Fixing of Criss Cross Scrambler Arihant's Model PGDL 09 or equivalent Product Area : 1.7m X 1.7m (5.6ft X 5.6ft) Safe Play Area : 2.7m X2.7m (8.9ft X 8.9ft) Ideal For : 4-12 Years Friends at a time : 5-6

Providing & Fixing of A to B Scrambler Arihant's Model PGKD 04 or equivalent Product Area : 3.6m x 0.5m (11.8ft x 1.6ft) Safe Play Area : 4.6m x 1.5m (15ft x 5ft) Age Group : 3-8 yrs Friends at a time : 4-5 The frame of A to B climber consists of alphabet shape „A‟ and „B‟ which is made from 25 NB GI pipes. It has spacers of 20 NB GI pipes. It also consists of a ladder placed between„A‟ and „B‟ made from 20 and 25 NB GI pipes. The whole item is powder coated to avoid rusting of the pipes and for esthetic look.

Providing & Fixing of Toddler Swing Arihant's Model PGSW 08 or equivalent Product Area : 3.3m x 1.0m (10.8ft X3.3ft) Safe Play Area : 4.3m x 2.0m (14ft X6.6ft) Ideal For : 3-8 Years Friends at a time : 2 In the toddler swing the center support is made up of 100 NB GI pipes. The horizontal bars are made up of 60 NB powder coated GI pipes. The bucket seats of the toddler swing are made of rubber with anti skid. The ball bearings are mounted inside specially designed nylon balls. The rubber seat is affixed on 6mm thick GI chain. The seats are made with full care so that the child does not fall from it while swinging.

Providing & Fixing of a Playset Arihant's Model Theme MAPS T19 or equivalent Product Area : 5m x 3.7m (16ft x 12.2ft) Safe Play Area : 7m x 5.6m (23ft x 18.3ft) Age Group : 2-5 yrs Friends at a time : 15 Platform Height : 3ft & 5ft (1)PLATFORM The platform is made in Fiber reinforced plastics with anti skid surface giving ,it is a smooth finish so that the child does not slip while walking on it . Each of the side should be 1.16 m x 1.16 m .The innovative Frog canopy and poll leaf at the top of the deck is made up of Fiberglass reinforced plastic which gives aesthetic look to the MPPS. (2).PLATFORM WITH CIRCULAR CANOPY (1.5 MTR) The platform is made in Fiber reinforced plastics with anti skid surface giving, it is a smooth finish so that the child does not slip while walking on it . Each of the side should be 1.16 m x 1.16 m .The innovative Frog canopy and poll leaf at the top of the deck is made up of Fiberglass reinforced plastic which gives aesthetic look to the MPPS. (3).FRP STAIRCASE The FRP staircase is made up of Fiber Reinforced plastic with a conservative thickness of 4 mm. Ladder should have Reinforcement to maintain strength and avoid bending. The top surface of the ladder should be such that it should not deserve any kind of skidde (4).WIDE STAIRCASE WITH RAILING :- The wide staircase is made up of Fiber reinforced plastic with thickness of 4 mm. The railling will be made from 20 NB GI pipe. The railling is attached to the deck with the help of 80 x 20 NB GI nylon clamps. The railing will be powder coated to avoid rusting. There is a FRP Lotus & SUNFLOWER is affixed to the deck pipe with the help of 20 NB GI pipe. (5). MINI WAVE SLIDE WITH SLIDE ENTRY ;- The centre support of the mini wave slide is made up of 50 NB GI pipe .The slide portion is made in glittering FRP material . The thickness of the mini wave slide is 4 mm with proper reinforcement to support the module; the landing support is made made up of 25 NB GI pipes. All the sharp edges and corners grinded to give smooth finish so that children are not hurt while playing the pure polyester powder coating done on the pipes extends the life of equipment . There is also FRP slide entry. (6). FROG RAILING :- The FRP Frog railing is provided for the deck for safety purpose And it is made of reinforced plastics. It is attached to the deck pipe with the help of 80 NB GI nylon clamps. The support pipe is powder coated to avoid rusting of the pipe. (7). DOUBLE WAVE SLIDE WITH SLIDE ENTRY :- The double wave slide chute with top entry module is made up of 4 mm thick fiber reinforced plastic with self pigment. The chute has its end such as it cause safe landing of the child. The landing portion is horizontal with respect to the ground. The landing support provided is made up of 25 NB GI pipe. (8). CROSS –N- ZERO :- This item provides brain washing experience to the children and enhances their technical strength by providing them an intelligent game. The prisms for the “x” and “o” of this item are made made out of molded plastics while the frame is made out from LLDPE in roto molded. The prisms are fixed on powder coated GI pipe frame of 20 NB GI and 15 NB GI pipes. The cross n zero attached to the deck pipe with the help of 80 NB nylon clamps. (9). BALL RAILING :- The ball for ball railing are made out of molded plastics (HDPE), While the frame of it is also made in Roto molding process. The ball is attached over 12 mm Dia rod to the frame. (10). FRP DOLPHIN /LOTUS/ SUNFLOWER / BUTTERFLY:- The dolphin is made from fiberglass reinforced plastics. The dolphin is mounted inside 20 NB GI pipe. The character is attached to etc. Complete as per directions of the engineer Incharge.

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Nagaur Town (Paratap Sagar Talab) Bidder should fill amount Rs. 300000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 300000.00 only.

Heritage Conservation and Renovation Work of Gulab sagar

Re-Fixing Stone jali including cost of making grooves instone, fixing with metallic key to hold it tight and making good with pigmented white cement and adhessive including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in charge. .including Loading , un loading and Transportation

Labor Charges for cutting, Jhiri as required size in existing sand stone for fixing kota stone including the cost of fixing good finish ( White Cement ,Color, Epoxy etc )complete in all respect as instruction given by Engineer in-charge

Lobour charges for making holes in existing sand stone drain cover to make it perforated sand stone drain cover ,including cost of all required arrangements, good finish, complete in all respect as instruction given by engineer in-charge

Supplying & Fixing Floating Fiber boat with Puff boat with Following Specification Size Minimum 11'x6'x2' wall thickness min. 6mm or as per Designing and Requirement

Liquid polyurethane Foam (PUF ), density 30-40 kg/m3

S. S Nut And Bolt -3" or as per required for fixing of structure on boat

GI pipe Manifold with 8nos aerator points with Necessary Arrangement of required dia & shape as per Design

Aerating GI fitting for Diffuser point ( surya/jindal ) Quantity And item As per Design Requirement and instruction given by Engineer in -charge Complete in all Respect

Brass Nozzle 3" inlet x 1" outlet , length & Quantity , other size / other Brass Fitting if requirement as per Design Complete in all Respect

8mm SS Rope or as per design for anchoring Usha Martin / L&T or Equalent

8mm SS Clamps or as per design for ss rope Usha Martin / L&T or Equalent

2ft length or as per design Anchors ( precast ) 20kg

Supplying & installation of required capacity of three phase , 50Hz,415V , air blower pump steel body ,as per is of approved make 2900rpm , inlet 2" out let2" oil filter, 3kg/min airflow, hight 2.ft ' and width 2ft KSB / Kirloskar / Crompton

Fibre Diffuser of size 2ft x 2" and dia 1" inlet with Black color 3mm dia diffuser holes as per design, complete in all respect as instructions given by engineer in-charge.

SITC of indoor control relay panel shall consiting of ammieter , voltmetre, selector switch, auxiliary relays for antipumping device,trip and alarm of buchhols realay, oil and winding temperrature circuit,electronic hooter, 230VAC to 110 VDC power pack with charging equipment for closing ,tripping and indication triple pole IDMTL two O/C and one E/F delay with current setting range 50- 200% and 10-15% , push button high speed trip relay etc; complete as per IS specification , consting of following equipment from any of the following makes , Schnelder, Seimens ,L&T

S&F following Item as per specification ( 1 )ISI mrked Automatic star-Delta Starters confirming to is: 13947-4 with suteble over lod relay range and contactor size & time 415 v,3- phase with two earthing terminals 3 to 12.5 H.P 4 - Nos. ( 2 ) Capacitor duty contactor of approved make in existing power factor / LT panel including connections etc, as required as per specification. For 63Amp, 4core, 440v, 3ph,50Hz, Aux contact 4 - Nos. ( 3 )Two Way Centre off MCB Change over Switch confirming to IS : 13947 (part III) / IEC : 60947 - 3, 2/4 pole, AC 240 / 415 Volt, 50 Hz, For 100 Amp, 4 Core. - 1 Nos. (4) Analog time switch for automatic ON - OFF light of approved make : Light Controller - 4 Nos. (5) S Ampere power supply - 400A - 230V - 12W Converter. 4 Nos. (6) Ampere Meter with CTs with selector switch - 4 Nos. (7) Push Buttons for On/Off - 4 Nos. (8) Single Phase Preventer - 1 Nos. (9) Timer - 8 Nos.

P & F of IP 68 protected LED underwater light system with Die cast housing, toughened glass diffuser, 18 X 1W, 12V DC LED lamps with dynamic color changing capability available in quick connecting cable coupled with various mounting accessories. Ability to create 16.7 million uniform, smooth and brilliant colors without revealing any lamp image. Available in 5 colors – amber, green, blue, red and white.

Online DO Analyzer S&F 5mtr cable and Digital Dispaly with RS485 o/P, RTU unit for same for the online acesses bhooi, xylem

Labour Charges for Preparetion of PUF boat by using all required material and techniques. As per Design

O & M work for all machinary / equipments and operations for Eco-management system including cost of making and submitting daily report to engineer incharge.

Removing,Repairing and Re-fixing of existing Stone Lamp Post, / sand stone Ghada including cost of all types of material, labour and machinary for repairing, dressing etc as required to match the existing design, complete in all respect as approved and instructions given by Engineer In-charge.

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Jodhpur North (Gulab Sagar) Bidder should fill amount Rs. 200000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 200000.00 only.

Heritage Conservation and Renovation Work of Fateh sagar

Re-Fixing Stone jali including cost of making grooves instone, fixing with metallic key to hold it tight and making good with pigmented white cement and adhessive including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in charge. .including Loading , un loading and Transportation

Labor Charges for cutting, Jhiri as required size in existing sand stone for fixing kota stone including the cost of fixing good finish ( White Cement ,Color, Epoxy etc )complete in all respect as instruction given by Engineer in-charge

Labour Charges for making holes in existing sandstone drain cover to make it perforated sandstone drain cover, including cost of all required arrangements, good finish, complete in all respect as instructions given by Engineer In-charge

Supplying & Fixing Floating Fibre boat with Puff boat with Following Specification Size Minimum 11'x6'x2' wall thickness min. 6mm or as per Designing and Requirement

Liquid polyurethane Foam (PUF ), density 30-40 kg/m3

S. S Nut And Bolt -3" for fixing of structure on boat

GI pipe Manifold with 8nos aerator points with Necessary Arrangement of required dia & shape as per Design

Aerating GI fitting for Diffuser point ( surya/jindal ) Quantity And item As per Design Requirement and instruction given by Engineer in -charge Complete in all Respect

Brass Nozzle 3" inlet x 1" outlet , length & Quantity , other size / other Brass Fitting if requirement as per Design Complete in all Respect

8mm SS Rope or as per design for anchoring Usha Martin / L&T or Equalent

8mm SS Clamps or as per design for ss rope Usha Martin / L&T or Equalent

2ft length or as per design Anchors ( precast ) 20kg

Supplying & installation of required capacity of three phase , 50Hz,415V , air blower pump steel body ,as per is of approved make 2900rpm , inlet 2" out let2" oil filter, 3kg/min airflow, hight 2.ft ' and width 2ft KSB / Kirloskar / Crompton

Fibre Diffuser of size 2ft x 2" and dia 1" inlet with Black color 3mm dia diffuser holes as per design, complete in all respect as instructions given by engineer in-charge.

SITC of indoor control relay panel shall consiting of ammieter , voltmetre, selector switch, auxiliary relays for antipumping device,trip and alarm of buchhols realay, oil and winding temperrature circuit,electronic hooter, 230VAC to 110 VDC power pack with charging equipment for closing ,tripping and indication triple pole IDMTL two O/C and one E/F delay with current setting range 50- 200% and 10-15% , push button high speed trip relay etc; complete as per IS specification , consting of following equipment from any of the following makes , Schnelder, Seimens ,L&T

S&F following Item as per specification ( 1 )ISI mrked Automatic star-Delta Starters confirming to is: 13947-4 with suteble over lod relay range and contactor size & time 415 v,3- phase with two earthing terminals 3 to 12.5 H.P 4 - Nos. ( 2 ) Capacitor duty contactor of approved make in existing power factor / LT panel including connections etc, as required as per specification. For 63Amp, 4core, 440v, 3ph,50Hz, Aux contact 4 - Nos. ( 3 )Two Way Centre off MCB Change over Switch confirming to IS : 13947 (part III) / IEC : 60947 - 3, 2/4 pole, AC 240 / 415 Volt, 50 Hz, For 100 Amp, 4 Core. - 1 Nos. (4) Analog time switch for automatic ON - OFF light of approved make : Light Controller - 4 Nos. (5) S Ampere power supply - 400A - 230V - 12W Converter. 4 Nos. (6) Ampere Meter with CTs with selector switch - 4 Nos. (7) Push Buttons for On/Off - 4 Nos. (8) Single Phase Preventer - 1 Nos. (9) Timer -4 Nos.

P & F of IP 68 protected LED underwater light system with Die cast housing, toughened glass diffuser, 18 X 1W, 12V DC LED lamps with dynamic color changing capability available in quick connecting cable coupled with various mounting accessories. Ability to create 16.7 million uniform, smooth and brilliant colors without revealing any lamp image. Available in 5 colors – amber, green, blue, red and white.

Online DO Analyzer S&F 5mtr cable and Digital Dispaly with RS485 o/P, RTU unit for same for the online acesses bhooi, xylem

Labour Charges for Preparetion of PUF boat by using all required material and techniques. As per Design

O & M work for all machinary / equipments and operations for Eco-management system including cost of making and submitting daily report to engineer incharge.

Removing,Repairing and Re-fixing of existing Stone Lamp Post, / sand stone Ghada including cost of all types of material, labour and machinary for repairing, dressing etc as required to match the existing design, complete in all respect as approved and instructions given by Engineer In-charge.

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Jodhpur North (Fateh Sagar) Bidder should fill amount Rs. 200000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 200000.00 only.

Heritage Conservation and Renovation Work of Padamsar

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Jodhpur North (Padamsar) Bidder should fill amount Rs. 100000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 100000.00 only.

DEVELOPMENT OF WATER BODY AT BILARA

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Bilara Bidder should fill amount Rs. 400000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 400000.00 only.