Rajasthan Urban Drinking Water Sewerage And Infrastructure Corporation Tender

Providing & installation at site of ISO-9001/9002 approved Control Panel with main switch, Starter, Ammeter and Volt meter, suitable starting & running capacitor etc. suitable for three phase pump set upto 10 HP including fixing of panel at guard in cement concrete block of size 0.45m x 0.45 x 0.60 m. Control panel box of size 90 x 75 x 30 cm should be made up of 20 swg MS sheet and base angles of size 40 x 40 x 6 mm

Sprinkler system

Sprinkler with MS Connecting pipe- IS: 14151 P-1&2 Type: Regular Latch and C type clamp Coupler, Corrosion resistance, Fine finish, Robust structure

Pump Connecting Nippel HDPE Vergin Granules With Standard Master batch 75mm dai

Sprinkler Coupler (Adaptor) - HDPE Virgen 75 mm dai

Installation, Testing & Commissioning of floating fountain 01. Floating body of FRP Materials of size 4ft. dia. X 10” thickness FRP of double coated Including extra materials for easy weight holding capacity with chemical polishing for extra water resistence capacity to durability. Make: AE- (1 Nos) 02. Anchoring of floating body with proper anchoring material(SS-304) to hold a floating body. Make:Any approve mak (40 Rmt) 03. Centre jet of high shooter nozzle of size 2”inch. bore of SS-304 CNC with nickel chromium plating with control valve. Make: AE (1 Nos) 04. Multi colored RGB LED Light 9W,12V SS-304-body, fixture with water proof Light (IP 68) protected ,dynamic color changing capability, toughen glass with elastomer sealed. Make: AE (4 Nos) 05. Controller for programmable colour changing system with 6-8 station changing option with RGB LED Light Make: AE (1 Nos)

06. Submersible pump 5Hp with required size of suction stunner and other fittings with all respect. Make: Crompton/Kirlosker (1 Nos) 07. Pump holding GI L-Type Channel for the proper weight & balance of pump. (Job Work) 08. Outdoor electrical Panel of 5hp pump(MCB,OLR,Push button switch, light indicator,voltmeter,ammeter etc. Make: L&T,Snider,any approve make etc.) Assemble by: AE (1 Nos) 09. Electrical submersible cable complete in all respect of 4 core round 1.5mm copper conductor. Make:Deep cable/finolex/any approve make (1 Set) 10. Electrical submersible cable complete in all respect of 3 core flat 2.5mm copper conductor,PVC insulated flat wire for pump. Make:Deep cable/finolex/any approve make (1 Set) 11. UPVC Plumbing and its fittings in 10kg pressure with bush,socket,T,Elbow,controlvalve,gate valve, etc. Make: Prince/Supreme (Required) 12. Installation,Testing and commissioning (Job) 13. Transportation

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Chittorgarh Town Bidder should fill amount Rs. 500000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 500000.00 only.

Rejuvenation of Surya sagar & Lalit Sagar (Supplying & Fixing of Open Gym instruments.)

Providing and laying the bentonite layer sandwitched in between original ground and a soil layer. the process shall be adopted as under:- 1. the pond must be drained out first. At most, the soil should be lightly humid for this technique to be properly applied. 2. Start the application by cleaning up the area of any debris, including logs, tree roots, rocks, and any other undesirable material. 3.Proceed to remove a layer of 4 to 6 inches of soil and leave them around the area of the pond, as it will be used later for covering. 4. Proceed to lay the bentonite in 100-150 MM thickness evenly throughout the bottom surface of the pond. The resulting layer is similar to laying a white blanket onto the pond area. 5. overlay the soil in 4-6 inches as a blanket that were previously removed should be carefully laid on top of the bentonite blanket. 6.Compact the newly created layers once, spray some water if possible and compact a second time. Bentonite required 110 tonne/ acre

SURFING BOARD Providing and fixing of Surfing Board of size not less than 1000mm (Length) x 600mm (Width) x 1400mm (Height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. The footrests shall be made from high quality fiber reinforced plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 1. Brand -Arihant or Similar

Parellal Bar Size : 1800x630x1700mm Providing and fixing of parallel bar of size not less than 1800mm (Length) x 630mm (Width) x 1700mm (Height), to build up the upper body strength (Chest ,shoulder,back) ,enhance core stability and balance . The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High-tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. Brand -Arihant or Similar

Sit up Board Dual Providing and fixing of Board dual of size not less than 1300mm (Length) x 490 mm (Width) x 85 0mm (Height), to build up the abdominal muscles ,improves core strength and stability ,enhance posture and balance . The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High-tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Brand -Arihant or Similar

Chest Press Double Size : 2500x800x2000 mm Providing and fixing of Chest press double of size not less than 2500 mm (Length) x 800 mm (Width) x 2000mm (Height), to build up the anterior deltoids and triceps muscles , improves chest strength ,enhance overall uper body development . The structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High-tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Brand -Arihant or Similar

CROSS TRAINER Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Width) x 1750mm. (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The Handle Frame shall be made up of atleast 25NB “C” Class G.I. Pipe. The footrests shall be made from Aluminum casting material of size not less than 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 30mmx310mmx3mm thick. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 Micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Make-Arihant or Similar

Leg Press Providing and fixing of Leg press of size not less than 2000mm (Length) x 550mm (Width) x 1600mm (Height), to build up the muscle groups of the leg , enhance and flexibility. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. The footrests shall be made from high quality fiber reinforced plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Brand -Arihant or Similar

Eliptical Cross Trainer Size:1220x550x1600 mm Providing and fixing of Eliptical cross trainer of size not less than 1220 mm (Length) x 550 mm (Width) x 1600mm (Height), to build up thecardiovascular fitness and weight loss ,improved muscular endurance and strength . The structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High-tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Brand -Arihant or Similar

Tichi Wheel Size:970x970x1940mm Providing and fixing of tichi wheel of size not less than 970 mm (Length) x 970 mm (Width) x 1940mm (Height), to build up the flexibility and balance ,ehance core strength and stability and overall physical fitness. The structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High-tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Brand -Arihant or Similar

Triple Twister Size:1400x1400x1350 mm Providing and fixing of tichi wheel of size not less than 1400 mm (Length) x 1400mm (Width) x 1350mm (Height), to improves the core strength and stability,enhance less and glute strength ,increase flexibility and coordination. The structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High-tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Brand -Arihant or Similar

Double Shoulder Press Size:1900x850x2000 mm Providing and fixing of double shoulder press of size not less than 1900 mm (Length) x 850mm (Width) x 2000mm (Height), to improves the deltoids ,trapezius and triceps,improve shoulder strength ,enhance overall upper body development . The structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High-tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Brand -Arihant or Similar

Pull & Push Chair Size:1900x850x2000 mm Providing and fixing of pull & push chair of size not less than 1900 mm (Length) x 850mm (Width) x 2000mm (Height), to improve the upper body strngth and endurance,targets chest ,back,shoulder and arms.enhance overall fitness and athleticism. The structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High-tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Brand -Arihant or Similar

Horizontal Bar Size:820x610x960 mm Providing and fixing of Horizontal bar of size not less than 820 mm (Length) x 610 mm (Width) x 960mm (Height), to improve the upper body strngth and endurance, targeting, back, shoulder, and arms. enhance overall fitness and athleticism,improves grip strength and forarm development . The structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High-tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Brand -Arihant or Similar

Double Elliptical (Exercizer) Size:2450x1100x1600 mm Providing and fixing of Double Elliptical (Exercizer) of size not less than 2450 mm (Length) x 1100mm (Width) x 1600mm (Height), to improve cardiovascular fitness and weight loss, improved muscular endurance and strength. The structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High-tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Brand -Arihant or Similar

Double Air Walker Size:2200x550x1480 mm Providing and fixing of Double Air Walker of size not less than 2200 mm (Length) x 550 mm (Width) x 1480mm (Height), to improve cardiovascular fitness and weight loss, improved muscular endurance and strength. The structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High-tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Brand -Arihant or Similar

THAI-CHI SPINNER (2 WHEEL) Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (Width) x 1280mm (Height), to increase mobility of shoulder -elbow and hip-knee. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High tensile S.S. nut bolts shall be used for assembly. The powder coating shall be done with pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. Make-Arihant or Similar

Push Bar Size:3x2.5x2.5 Ft Providing and fixing of Push Bar of size not less than 3 ft (Length) x 2.5 ft (Width) x 2.5 ft (Height), to improve overall fitness and athleticism,target chest,shoulder, and triceps ,devlop upper body strength. The structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High-tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Brand -Arihant or Similar

Double Sitting Twister Size:800x400x900mm Providing and fixing of Double Sitting Twister of size not less than 800 mm (Length) x 400 mm (Width) x 900mm (Height), to improve flexibility and balance,develop core strength and endurance The structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High-tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo Brand -Arihant or Similar

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Badi Sadri Town for Surya Sagar Talaab Bidder should fill amount Rs. 400000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 400000.00 only.

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Badi Sadri Town for Lalita Sagar Talaab Bidder should fill amount Rs. 200000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 200000.00 only.

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Nimbahera Town Bidder should fill amount Rs. 400000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 400000.00 only.