Rajasthan Urban Drinking Water Sewerage And Infrastructure Corporation Tender

Providing and fixing of water proof canvas fabric cloth of thickness 500GSM including necessary accessories i.e. washers,screws, nut-bolts, wire rope, clips, fixtures etc at sufficient interval as per dsign. The cloth shall have UV block range 91.1% to 95.5% with 10-year UV degradation warranty,Temperature range –22°F to 158°F,Fray and tear resistant,Breathable,Rot resistant,Won’t absorb moisture,Heat set to eliminate shrinking, post installation, Stretch properties as Tear Tensile: WARP 278 lbs/ft and WEFT 340 Burst Tests: up to 828 lbs/ft and 100% People and environment-friendly, free of lead and phthalate as per direction of engineer in charge for Out Door purpose.

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Sirohi Town (Lakherao Talaab) Bidder should fill amount Rs. 200000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 200000.00 only.

Name of Work: REJUVENATION OF NIDORA LAKE & GARDEN DEVELOPMENT, SIROHI

P & F of IP65 IK10 protected LED Bollard fixture. Light Fixture made of powder coated alluminium/Steel housing with diffuser for uniform distribution. The System level Luminous efficacy 85 Lumen/W. SMD LEDs . CRI70, CCT: 3000/4000/6000 K. The integral SMPS based electronic driver must be constant current and inbuilt surge protection of min. 4KV(L-N) and efficiency 85%, PF0.9 and input Voltage range of 90- 270V AC at 50Hz. System life of 50000 burning hours with 70% of Initial Lumens maintained. Light should include quick connecting cable coupled with various mounting accessories. Light output in Cool white or Warm White Colour as per engineers choice. Fixture must be in compliance with IS/CE Standards. 1.0 Mtr Bollard

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Sirohi Town (Nidora Lake) Bidder should fill amount Rs. 100000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 100000.00 only.

Name of Work: REJUVENATION OF SANT SITARAM SAROVAR LAKE & GARDEN DEVELOPMENT, PINDWARA

SITC of Aeration machine of capacity up to 600m3/hr including 10hp motor in alll respect as per direction of Engineer in-charge

SITC aeroxy tubes inner diameter 12.5mm and outer diameter 25mm complete in all respect as direction of Engineer in charge

SITC Flexible pipe diameter 15mm complete in all respect as per direction of Engineer in charge

Electrical works

P & F of IP65 IK10 protected LED Bollard fixture. Light Fixture made of powder coated alluminium/Steel housing with diffuser for uniform distribution. The System level Luminous efficacy 85 Lumen/W. SMD LEDs . CRI70, CCT: 3000/4000/6000 K. The integral SMPS based electronic driver must be constant current and inbuilt surge protection of min. 4KV(L-N) and efficiency 85%, PF0.9 and input Voltage range of 90- 270V AC at 50Hz. System life of 50000 burning hours with 70% of Initial Lumens maintained. Light should include quick connecting cable coupled with various mounting accessories. Light output in Cool white or Warm White Colour as per engineers choice. Fixture must be in compliance with IS/CE Standards. 1.0 Mtr Bollard

P & F of IP-66 protected high power LED flood light system with extruded aluminium housing , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps supplied with pre wired cable of 1 mtr. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumen be maintained. Light output in red , green , blue, cool white or warm white colour as per engineers choice. Fixtures shall be CE compliance. High power LED flood light 200 watt. Make :- Philips, Bajaj, CG, Wipro, GE, Havells, HPL, Surya, Schreider, Keselec, Lighting Science

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Pindwara Town Bidder should fill amount Rs. 100000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 100000.00 only.

Name of Work: DEVELOPMENT OF SIGHPRASTH SAROVAR, SUMERPUR

Supply installation testing & Commissioning of ISO certified company 30.5M Flag mast. Mast shaft shall be in three sections, hot dip galvanised by single dipped method and suitable for wind velocity as per IS 875 with FRP dome. System for Raising Lowering of Flag. It Shall have double drum winch, 6mm dia galvanised wire rope and integral power tool for the raising and lowering of Flag. Suitable Control Panel shall be provided for reversing operation of Power tools Motor Mast shall be suitable for Indian Tri Color Flag Size 30Ft X 20Ft. Mast shall be PU painted. Mast head frame assembly with full cover, including 1 No. LED 10 Watts aviation obstruction lights, double drum type self sustaining winch, integral power tool accesible from door with padlocking arrangement ( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial,, trailing cable for aviation light , including outdoor type control panel for auto on / off, reverse / forward motor operation and CC foundation of M - 25 grade complete as required as per IS 456/IS 2911. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135. OEM must have inhouse PU paint facility.

OEM Must have Type test certificate for wind tunnel test for mast fixtures. complete in all respect. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. All as per pre approved by Engineer in charge. Material Cunstruction:- IS 2062 grade E350 / BS EN 10025 or Equivalent having minimum yield strength of 350 N/Sq. mm. Top/ Bottom (diameter of Mast):- 150/540 mm. Thickness of Section (Top-middle-bottom):- 3-4-4 (mm). Thickness of Galvanisations (Min.):- As per BSEN ISO 1461 (For Steel ≤ 3 mm- 55 Microns & For Steel 3mm to ≤ 6 mm - 70 Microns). Diameter of Base Plate (Min.):- 730 mm. Thickness of Base Plate (Min.):- 30 mm. Nos of foundation Bolt sand size:- 12 Nos and 30 mm Dia. PCD of Foundation bolts (min):- 635 mm. Bolt Length/Grade/Tensile Strength:- 1200mm/ EN 8 Grade Minimum tensile strength 600 N/mm2. Winch:- Nos. of Drum (Drum/Winch):- 2, Capacity (Min.):- SWL 500Kgs, Wire Rope (Nos./Thickness):- 2 continuous/6mm, AISI 316. Make:- Bajaj/ Valmont/ Skipper.

Supply and Fixing of national flag of size 20Ft X 30Ft in 100% knitted Polyester (140gsm), with reinforced super-strong nylon webbing on all 3 sides & rope/toggle sleeve.

Supply of national flag of size 20Ft X 30Ft in 100% knitted Polyester (140gsm), with reinforced super-strong nylon webbing on all 3 sides & rope/toggle sleeve.

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Sumerpur Town Bidder should fill amount Rs. 500000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 500000.00 only.

Name of Work: Construction & Beautification of Ghat at Sundelab Talab, Jalore

Providing and Fixing of Stone Chattris of size (3X3X5 ) M in Bansipaharpur stone on 6 to 8 pillars of size 0.30-0.45M Dia. as per MARWADI architecture including carving, cladding etc all including required DASA copings and all attached and fixing with SS clamps and fasterners with tenax chemical ,including Planning, developing, making base, carving work, polishing, all loading-unloading, transportation, scaffolding, hoisting, installation with all required T&P (including white cement, pigment, Chemical, SS clamps and fasteners of approved brand etc.), fixing over/on base/surface as per shape-size & placement of approved drawing , finishing, surface treatment etc. covering properly till the date of pening/inauguration of site etc. under the direction of engineer incharge and as per approval from Architect

Providing and Fixing of Stone make decorative heritage pole in 4 Meter height. Pole upper section of length 3mtr is of dia 76mm and 1 meter bottom section of dia 114mm with decorative casting with base plate as per drawing. Provision for inside termination box with 4way connector & 1nos 6 AMPS MCB for local isolation with cover.Complete in all aspects with foundation bolts 4.0 Mtr

Supply, Installation, Testing and Commissioning of Spike Light of 6 Watt and 10 Degree Beam Deflection and 3000 K CCT similar to the Model LLO180 of Make Litomatic

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Jalore Town Bidder should fill amount Rs. 100000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 100000.00 only.

Name of Work: Rejuvenation and Strengthening of Pond, Ahore

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Ahore Town Bidder should fill amount Rs. 100000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 100000.00 only.

Name of Work: Beautification of Kamla Nehru Garden, Mt. Abu

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Mt. Abu Town Bidder should fill amount Rs. 400000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 400000.00 only.

Name of Work: Development and Beautification of Talab, Takhatgarh

Providing and laying CNS (Cohesive non swelling) layer for running track in required thickness comprising of clay silt and gravel mixed in desired ratio including excavation in borrow area / quarry, transportation to work site with all leads and lifts of all ingredients, mixing homogeneously by suitable method, laying in layers of 15-20 cm watering and compaction by mechanical vibro compactor to achieve a desired density including dewatering whenever necessary and complete as per technical specifications. Ingredients of CNS layers are: - (i) clay 20% (ii) Silt 35%(iii) Sand 40%(iv) gravel 5% Kachcha Track

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.By mechanical means with all lead : For Grading I Material

Fix Provision for O&M of all facilities created under this contract Five Years as per Tender Document (yearwise payment amount is given in tender document) for Takhatgarh Town Bidder should fill amount Rs. 300000.00 Bidder should fill this amount in case any other amount is filled then it will be consider as Rs. 300000.00 only.