Rajasthan University Of Veterinary And Animal Sciences Tender

Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level 1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 40 mm nominal size (Crusher Broken)

Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in : Cement Mortar 1:6 (1-Cement:6-Sand).

Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls in : Cement Mortar 1:6 (1-Cement:6- Sand).

Half brick masonry in foundation & plinth using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing and laying in position Ready mix concrete manufactured in fully automatic Batching Plant and transported to site in transit mixer for having continous agitated mixer, manufactured as per approved mix design of specified grade of RCC work including pumping of R.M.C. from transit mixer to site of laying , exculding the cost of centering, shuttering and reinforcement with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. All works upto floor V floor M20 grade Design Mix by using cement as per codal provision.Providing M-30 grade concrete by using cement as per codal provision instead of M-20 grade design mix.

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Walls (any thickness) including attached pilasters, buttresses plinth and string course.

Add extra for shuttering in circular work (in respective centering and shuttering items)

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code)

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20mm thick. 12 mm Thick (Inside Plaster)

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20mm thick. 25 mm Thick (Outside Plaster)

Wall painting with plastic emulsion cpaint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.

Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Two or more coats applied @ 3.84 kg/10 sqm).

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm thick nominal size aggregate.

Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red/ Choclate/ Black/Pink Colour) Up to 1500 Cm2 Tiles Miscellaneous Work like step, window, urinal seprator etc.

Extra for providing edge moulding to 15- 18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work Full Edge moulding

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. Welded mesh 25x25mmx16 gauge

Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling o be paid for separately). For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)

Providing and Fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade-I, Type-II confirming to IS 12823 bonded formaldehyde synthetic resin of approved brand and manufacture in paneling fixed in aluminium doors, windows/ stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Prelaminated particle board with decorative lamination on both side.

P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia. 110 mm Dia Machine room Rain Pipe

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Coupler (socket)

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Plain Tee

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Door Tee

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 45

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Vent Cowel

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Pipe Clip

& F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc. "B" Class. 50 mm dia nominal bore.Vent Pipe

Making connection of G.I. distribution branch with G.I. main including all fitting. Beyond 25mm & upto 100mm dia

Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anitcorrosive red oxide primer paint. Tank Door

Supply of following sizes of D I K-7/ K-9 pipes Class medium and all jointing materials etc. complete (DI K-7) 100mm dia

Supply of following sizes of C.I. D.F. sluice valve as per IS-780-1960 tested to 10 Kg per cm2 etc. complete. 100mm dia

Excavation for pipe work in ordinary soil (loam, clay and sand) with lift upto 1.5 m, and lead upto 50m including filling back the excavated earth into trenches with watering ramming and disposal of surplus earth within 50m lead.

Carting of following sizes of D.I K-7/K-9 pipes with specials from store to site of work, lowering the same into trenches and laying true to alignment and gradient including jointing properly ,testing of pipe line (but excluding the cost of trenching and cutting of pipes for making the length etc. 100mm dia

Carting of following size of C.I.D.F sluice valve from departmental store to site of work, lowering the same into trenches and fixing in position & jointing the same with supply of jointing materials and testing etc. complete. 100mm dia

Supply of the all the material and the construct the sluice valve chamber complete at the site as per type design (masonry type)

Construction of P.C.C. thrust block at the bends including supply of all materials labour & T&P e.t.c. complete required for proper completion of the works.

Site clearance and other unforeseen items

PUMP-SET 300 LPM 40 m head 2900rpm 5 H.P. submersible clear water pumping plant suitable to operate on 415+ 5% volt, 50hz, 3-phase A.C. Supply (As per IS 8034-1989)

Switch gear (Fully automatic air break star delta starter fabricated by sheet steel wall mounting type dust and vermin proof cubical panel board with front opening door complete with internal wiring and 3 Nos. Instrument fuses, 3 Nos. toggle switch, 3 Nos. Indicating lamp, 1 No. A.E./L&T make 100 mm dial size Ampere meter, 1 No. A.E./L&T make 0 to 500 volts 100 mm dia size volt meter, 1 No. volt meter selector switch, 1 No minilic make single phasing preventer and 1No. power capacitor BCH/EPCOS make. of suitable size fitted with G.S.M. based Facility and 1 set. water level controller with accessories as per attached specification of switch gear) including Power wirring material built in with following accessories as per duty point of submersible pump sets( Fully automatic air break star delta starter cum panel) build in with following accessories. Type of starter - Fully Automatic star delta stater of L&T Make. Comprising of following instruments. Contactors of suitable ratings. TOR of suitable ratings. PB Switches Dual Amp & Voltmeter Amp meter selector Switch. Indicating Lamps Phase Failure Phase reversal relay Single Phase Preventer. Capacitor of suitable ratings GSM. Reference Standard:- IS/IEC: 60947-4-1 & IEC: 60947-4-1 Method of Control: - Wireless Contactor:- Suitable ratings Method of Cooling: - Naturally Air Cooled Motor Protection Provision Therrnal Over load relay Trip Class 10A Relay Range As per standard Water Level Controller Auto & Manual Provisions Pump OFF' when.tank is Full Pump 'ON' when tank is empty Indication for controller 'ON' System Protection:- MCB/MCCB for short circuit protection Power Factor: - Suitable rating Capacitor for improvement of power Factor GSM Features: - a) Make controller 'ON b) Make controller 'OFF' c) Controller can be made 'ON' for particular time. d) Feature of daily timer e) Auto/Manual Mode f) Power resumes feedback with duration g) Feedback can be given to 3 monitoring numbers h) Feedback will be given if the Controller manually 'OFF' i) Feedback on faults j) Feedback in case of power failure up to two phases k) Wide input voltage 100V to 540V, AC 3 phase, .3 wire, 50Hz

Wireless type GSM based pump controller complete kit.

MAIN PIPING AND VALVES 100 mm 5.4mm thick M.S. column pipe with both end flanged and groove for passing submersible cable in each length in 3m long 24 m with 1m long top pipe with cap (Damdam) andwater sealing rabber ring. (8 Nos), CI-D/F 900 Bend of size 100 mm dia. (1 Nos), CI-A/F Tee of size 100 mm dia. (1 Nos), M.S. Distance pipe 100 mm dia (2 Nos), M.S. Distance Pipe 100 mm dia. (1 Nos), M.S. enlarger/reducer of suitable size. (1 Nos), 100 mm dia.D/F Sluice Valve (1 Nos), 100 mm dia P.N. rating 1.0 having following specification confirming. (As per IS - 14846-2000) (2 Nos), Non rising system with hand wheel, Both end flanged, With Isometric trap axial threads for smooth operation of stream, Face ring pressed in body and wedge, Wedge tarred on both sides provided with deep grooves inside, Application Handling of clear and cold water sp. gr. 1.0 (Confirming to 15.780/I.S. 2905, 100 mm dia Reflux Valve, (Confirming to IS-5312 part-I) Having following specification, Suitable for handling clear and cold water having specific, gravity and temperature up to 50, Both end flanged, Door contact on the periphery, Body: Gun Metal., Hinge pin stainless steel, Disc face: High quality mature rubber or better (1 Nos).

GAUGES :-Pressure gauge 100 mm dial 0-7 kg/cm2 (1 Nos), Depth Gauge 100 mm dial 0-390 Ft. (1 Nos), Other necessary fitting for gauges (1 Nos), 8 mm dia. Steel airline 40 meter with bend, elbow (1 Nos), tee, union joints, sockets, control cock, Schrouder valves, hand air pump etc. (1 Nos)

TOOLS (REPUTED MAKE) IN A TOOL KIT Pipe wrenches 350 mm (1 Nos), Pipe wrenches 300 mm (1 Nos), D/E spanner 22/6 mm (1 Nos), Adjustable wrench 300 mm (1 Nos), Screw driver (a) 12 X 250 mm (1 Nos), (b) 8 X 250 mm (1 Nos), (c) 5 X 250 mm (1 Nos), Combination plier 200mm (1 Nos), Nose plier 200 mm (1 Nos), Hammer with handle 1 Kg. (1 Nos), Line tester (Taparia make) (1 Nos)

LIFTING TACKLE (REPUTED MAKE) 2 tones capacity 4.5 m lift, spur geared chain pulley block (Tested on 3 Tones.)

Misc. items such as protection ring, cutout, electric resistanace rubber sheet.

PAINTING Painting of pumping plant with approved anticorrosive and specified colour paint-2 coat.

Commissioning & testing of pumping plant.

INSTALLATION Installation of pumping plant along with all neccessory fitting including by pass & delivery arrangements, airline and gauges fitting etc. complete in all respect with power wiring & earthing

Transportation of Pumping Plant Chlorinating Plant & T.&P etc. Carting of Pumping Plant, Chlorinating Plant etc. by Truck in Two trips (Including return back of empty Truck) Loading and Unloading of above

One month watch & ward during the period of installation.

Supply & Erection of 10K.V.A. automatic air cooled voltage stabilizer for input voltage 200 volt to 480 volt output voltage 415 ± 1% including all associated accessories components for proper functioning of 5H.P submersible pumping plant

Internal Electrification of pump House comprising 6.5 points PVC casing-capping wiring with copper wire & necessary fittings.