Rajasthan Tourism Development Corporation Limited Tender

50.0 Sq.mm X 3.5 core

SITC of wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet , required hardware ,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear . Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator)

Supplying and fixing of Aluminium / Copper bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. Electrolytic grade Copper bus bar

S & F of (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type

S & F of CT operated direct reading type Ampere meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type

S & F of Current Transformer , with all necessary support in existing panel including connection etc. as required . from 200 / 5 to 400/5 Ratio , 10 VA , class 1 accuracy

S & F of selector switch of 10 A for voltmeter (4 position ) including making connection etc. as required .

S & F of CT linked selector switch of 10 A for Ampere meter (4 position ) including making connection etc. as required

Supply & fixing of GI pipes with flanges duly screwed & welded including rubber washer, nuts & bolts of 8mm dia complete in all respect ISI make.

B class 50mm dia

S & F of 110/220 V, LED (22.5 mm dia ) Indicating lamp with integral circuit, terminal block, including connection etc. as required. Red/yellow/Green colour

P & F of Multy function meter with LCD/ LED display capable of measuring electrical parameters like V, I, F, PF, KW, Kva, Kvar, Kwh, Kvah, Kvarh display with 1A/5A CT input for LV/ HV network, RS 485 communication port etc. complete in all respect.

SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push ( test ) to trip , including making connections with lugs & spreaders, etc. as required. With Thermal Magnetic release

250 Amp , 35 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu

up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu

P & F of IP 65 protected High Power LED Flood Light system with Pressure die cast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240V, 50Hz - High Power LED fixture supplied with pre-wired cable of 1 mtr. Integrated Driver shall be high efficiency having efficiency more than 85% and in compliance to IEC standards /BIS certified the System level Lumens efficiency 100 % with High Power LEDs of CREE / NICHIA / OSRAM / PHILIPS / SEOUL make is to be used LED Driver Input Voltage AC 110 to 270 V AC with Auto resetting Safety Cut – off. Input Frequency 50 Hz +_ 3 % Power Factor 0.95 Driver Efficiency 85%, Control Gear Integral Design, THD (1) 10 %,. Electrical Connector Must be provided Surge Protection Min =5KV internal and 10 KV external in 80W onwards Humidity 10% to 90% RH Working Temp -20C to 50C. LED Luminaire Specifications: Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintenance Manufactures Word Mark/ Name Engraved/ Embossed on die cast housing to allow traceability / authenticity till life of fixture, Fixtures shall be CE and compliance

High Power LED Food Light 240 Watt

Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.

S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.

25mm x 5 mm copper strip

Add Extra if Cable laid through Vernier Machine

P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with Copper conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of app. make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 6.0 Sq.mm x 4 core

P & F of ac operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4-1/IEC:947-4-1 having provision of mechanical interlocking, auuxilary contacts, Din rail mounting type including making connections, testing etc. as required. 4 pole Power contactors with following AC 1 Rating 100 Amp