Rajasthan Tourism Development Corporation Limited Tender

Random Rubble stone masonry for with hard stone inSuperstructure above plinth level in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand).

Add Extra for facing as per design and detailed specifications including additional cost of stone course rubble facing first sort

Half Brick masonry with F.P.S. bricks of class designation 75 in above plinth with bricksCement mortar 1 : 4 (1 cement : 4 coarse sand)

Supply and installation of Mult Rib-proofing/cladding sheet manufacture out of 0.50 TCT high tensile zinc aluminium alloy coated galvaiumesseel (As per IS 150 gsm Zink aluminium 550 MPA tuekd strength) confirming to IS 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and center width 1020mm sheet be casted with fine on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate at made at to prevent leakage sheet shall be fixed by more of sell drilling lift tapping hot zink coated hox head fasterner of size 12x14x55 mm long head fasterner of size 12x14x55 long. The sheet shall be supplied in cost one length and foe a minimum upto 12mt. with all scaffolding

a) Add extra for 0.80 mm TCT (total coated thickness ) high tensile Zink aluminium alloy coated galvaniumeseel sheet in place of 0.50 mm thick

Providing and fixing steel gate grating and grills made of angles tees square bars, flats or blackpipe with holdfast and fittings complete as per design and drawng including cutting, welding and fabrication with priming coat of red oxide

Extra if square, rectangular hollow tublar sections are used or grill made by flats only

Plaster on new surface on wall in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 25mm thick

Extra for proviiding and Mixing water proofing material in cement plaster work in proportion recommended by manufacturer

Pointing on stone masonry in Cement mortar 1:3( flush/ruled/struck or weathered pointing

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code)

Centering & shuttering with plywood or steel sheets including strutting,propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills,chhajjas, lintel, beam, plinth beam etc.

Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. , South Zed Black Above 3601 Cm2 Slabs

Providing and fixing Ist quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazes tiles ISI marked (IS : 13753) of size 300mm X 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and pillar).

Category-A : Kajaria, Jhonson, Somani make.

Kota stone slab flooring 25mm thick over 20 mm thick base laid over jointed with grey cementwith pigment to match the slab shade including rubbing and polishing complete for area of each slab 2001 ro 5000 sqcm.

Providing and fixing M.S. 1 mm thick single leaf door shutter in single iron frame 35x35x5 mm suitabally diognally braced with 25x3mm flat iron above & below lockrail of size 50x5mm beading extra including all fittings but excluding cost of choukhats i/c. 2 coats of anticorrosive red oxide primer paint extra for double leaf shutter

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete: New Plastered Surface (three or more coats)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer.

Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. : Granite Work

Painting with enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work.

Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C C block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge : Window fixed.