Rajasthan Tourism Development Corporation Limited Tender

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

French Sprit polishing two or more coats on new work including a coat of wood filler.

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete.

Providing and fixing 15mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles pf a[[rpved texture as per direction of Engineer in charge of size 595x596mm intrue horizontal level suspended on inter locking metal grod of hot dipped galvanized steel sections (galvanizing @ 120grams per sqm) consisting of main T runner suitably spaced at joints to get required length and size of 24x38mm made from 0.33 mm thickl (minimum ) sheet, 1200mm centre to centre, and cross T of size 24x32mm made out of 0.33mm (Minimum) sheet, 1200mm long spaced between main T at 600mm centre to centre to form a grid of 1200x600mm and secondary cross T of length 600mm and size 24x32mm made out of 0.33mm thick (Minimum) sheet to be interlocked at middle of the 1200x600mm panel to form gird of size 600x600mnm resting on periphery walls/partitions on a perimneter wall angle pre-coated steel of size (24x24x3000mm made of 0.40mm thick (Minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick densified edged calcium sllicate ceiling tiles of approved texture in the grid including cutting /making opening for services like diffusers, grills, light fittings, fixtures smoke detectors etc, wherever required, Main T runners to be suspended from ceiling using 50mm long M 6 dash fasteners, 6mm G.I. fully threaded rods with galvanized steel L cleat level adjusters of size 85x25x2mm, spaced at 1200mm centre to centre long Main T bottom exposed with 24mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications drawing and as directed by Engineer in charges.

Providing and fixing Ist quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles conforming to Is:13753 & IS: 15622 of size 200mmx300mm in walls, floors, steps, pillars, etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillars)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr. lead.

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finish 25mm thick