Rajasthan State Road Development And Construction Corporation Limited Tender

Providing internal cement plaster 12mm thick in a single coat using Ready to use wall plaster to concrete or brick surface in all positions including scffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete. a) cement ratio 1:5 With Prior Approval of Concerned S.E.

Providing and laying vitrified mirror/glossy finish tiles decorative type having size590mm to 605 mm x 590 mm to 605 mm of 8to10mm thickness and confirming toIS.15622-2006 (groupBla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.

Providing and fixing 1.5mm thick polyvenyl chloride flooring including leveling the base with white cement including pasting with appropriat material cleaning the surface etc. complete

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Providing and fixing on walls/ceiling/floor 25mmdia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipe line If necessary and conveying and stacking the same in PWD chowk or as directed etc.complete.

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and constructing Brick Masonry Inspection Chamber 60cmx45cmx90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channel shal fround G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete.

Providing internal/external 20mm thick Ready Mix plaster confirming to IS:4031(Part-4) 1988 and IS383-1970 in a single coat using Cement mortar of proportion 1:4 containing special type of polymer additives about 0.4%, to all type of surfaces in all positions including scaffolding and curing complete

Providing and applying Texture plaster with finishing with texture material of approved make in 3to4 millimeter thickness on previously plastered srface ,including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete.

Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning complete.b) Granite

Providing and laying in position flooring of telephone black/Amba White/ Catbary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cemen tmortar including cement floats striking joints, pointing in C.M.1:3 curing and cleaning etc. complete.

Providing and fixing machine cut mirror polished 18mm to 20mm thick telephone black/Amba White/ Catbary brown/ RB Ired/ Ocean Brown granite stone partition with full moulding the edge setc.complete. One side polish

Providing fly ash brick masonry with conventional/I.S. type bricks in cement mortar1:6 in super structure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint incluing scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required,etc. complete.

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wpe clean for area.Applying Asian/Berger/Nerolac/Dulex Paints or equivalent wall primer with brush by adding mineral turpentine oil by 8to10% or water by 15to20% allowing to dry for 6to8 hours After applying Asian/Berger/Nerolac/Dulex Paints or equivalent acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4to6hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40to45% or 65to70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40to45% or 65to70% by roller.(Withprior approval of S.E.)

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soiling 15 cm to 20 cm thick including hand packing and compacting complete.

Providing and fixing of BITUFLEX CLOSE CELL FOAM of size 30 mm x 30 mm in double layer in the expansion joints in R.C.C framed structure (at floor level / at terrace level / interior columns) for overlapping of closed cell foam joints, applying TP- 40 PRIMER on both the sides of concrete surface, filling the 25 mm x 25 mm gap with the POLYDEE-41 highly flexible sealant and covering the joint with Polydee-LM, 150 mm width in 2 coats etc. complete. Page Nos..262

Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No.: Bd.V.41, Page No. 573

Providing, laying and fixing P.V.C.pipe of 110mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete .Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing, aupplying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4mmthick ACP sheet material consisting of 3mm thick Fgrade mineral core following NBC part IV Fire and life safety (having 2hours fire resistance inaccordance to ASTME119-12 and BS476 part6 and 7 classO) sand witch ed between two aluminium sheets (each0.5mmthickofAA5005/AA3105grade) The aluminium composite panel cladding sheet shall be coil coated with kynar500 based PVDF/Lumiflonbased fluro polymer resin (having70:30 ratio of PVDF and acrylic) coating of approved colour and sg=had eon top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts,bolts,washers,cleats, weather silicon sealent, backerrods etc .overall weight of the ACP shall not be less than 7.5 kg/sqm)

Providing and fixing shutter to wall cup board made from 19 mm thick Teak particle board with approved coloured laminated face 1.5mm thick bonded with penolformaldehyde synthetic resin B.W.P. grade including lipping beading ir onoxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).

Providing and fixing reinforced cement concrete cover of size90cmx45cm with frame over inspection chamber etc.complete.Heavyduty(225 kg)

Jaipur BSR-2019

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding,

P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. size 1000 mm X 1000mm

Providing and fixing of perforated Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width height of 32mm. The tiles shall be perforated to 1.5mm dia with open area of 23%. The Tile will be manufactured on advanced includes several leveling stages in the manufacturing process by approved manufacturers. Tile ends will be raised with pips and slops to ensure positive engagement into the spring to enable for de-mounting of individual panels. The Tile sides will be sufficiently high to ensure a minimum deflection across the length of Tile. All Tiles will be bevel edged. The Tile shall be epoxy polyester powder coating in white colour. The Tile shall be cllpped into clip in rail of 0.5mm thick GI. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G .I rod, Hold on Clamp with Clip. POWDER COATING SPECIFICATION: Aluminium PANELS, cleaned through eco friendly cleaning ,process and powder applied thru electrostatic charged Automatic Carona technology spray guns and cured in combination of Infrared & hot air oven in a certified plant as Akzo International approved applicator .

P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 25mm nominal bore.

Thane -Schedule 0f rates 2011-12

Providing , laying & fixing ,jointing Supreme Eco- drain 110 mm SN 8 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. Spec. No.: As Directected By Engineer Incharge

Non BSR Item

Providing and fixing tuffened glass panels of ASAHI, Saint Gobain or any other equvialent make in straight position witch shall have 12 mm thickness and clear in appearance. This item includes all hardware fixtures like DORMA- magnet/PAG magnet No. 1417 or any other equivalent make for floor, beam, and ceiling fitting to hold the glass in required stable position. The glass shall be sealed by 5 mm "D" profile white seal made from cellular EPDM running through the entire profile length.

Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement all complete as per direction of Engineer-in-charge.

Trap door -Providing & Fixing of 1800x1100 mm Trap door Shutter made from 12.5mm Gypsum Bord and both side of Gypsum Board Finish with Paintas per approved by Engineer in charge .Shutter frame to be made with 19mm thick Specified ply havinf Additional 19mm to form band and operated on hinge .All Exposed edges to be finished with BTC bedding & locking Arrangement with LN key lock & necessary Hardware fittings.