Rajasthan State Road Development And Construction Corporation Limited Tender

Chair (Peacock ) Chair with low back support chair, chair base made out with wooden finish and chair seat and back structure duly made with medium density foam covered with fabric tapestry chair having two nos. of arm made with wooden finish.

Seminar Table Size : 1800 x 1200 x 750mm (L x W x H) Supply of Table with following specifications Table top 25Mm Thick Prelaminated Particle Board of Action Tesa/Green Lam / Merino with 2.0mm thickPVC edge banding of Reahu/Dholkin/Spectrum supported On 50X50 (Tolerance + & - 5mm) Square Pipe wall thikness 2.0mm Open Desk Metal Understructure of Branded MS square tube. With 2 Year warranty on the manufacturing defect.

Full Height Storage Size :950x 400 x 2150mm (L x W x H) Supply of Storage with following specifications 18Mm Thick Prelaminated Particle Board of Actin Tesa/Green Lam /Merino 2.0mm thickPVC edge banding of Reahu/Dholkin/Spectrum All necessary Hardwares Such as lock &Handels Of Hettich/Hafele as per size required. Hardware and fitting of Hettich/HafeleWith 2 Year Warranty on manufacturing defect.

CONFERENCE TABLE Size :25’ x 17’ x 2’6” (L x W x H) The conference table is modular having following modules. Rectangular Module It is the main module used for making modular conference table. It is of size 3810 x 600 x 750 mm (WXDXH). The top surface will be made of 18mm+(18mm thick MDF Board 150mm width skirting fixed below the 18mm thick table top) thick MDF board laminate with membrane finish. There are two supporting side legs of 525 X 726mm (WXH) and these will be made of 18mm thick MDF board post formed finish with 2.0mm thick PVC Edge Banding of matching colour on the edges. Rectangular Middle Module It is the middle module used for making modular conference table. It is of size 1350 x 750 mm (WXD). The top surface will be made of 18mm+(18mm thick MDF Board 150mm width skirting fixed below the 18mm thick table top) thick MDF board laminate with membrane finish. There are two supporting side legs of 525 X 726mm (WXH) and these will be made of 18mm thick MDF board post formed finish. with 2.0mm thick PVC Edge Banding of matching colour on the edges. Quarter Round Corner Module It is used as a corner module in a conference table. It is quarter round in shape. It is of size 838 x 838 mm (WXD). The top surface will be of size 838 x 838 mm (WXD) and will be made of 18mm +(18mm thick MDF Board 150mm width skirting fixed below the 18mm thick table top) thick MDF board laminate with membrane finish. There are two supporting legs made each of size 525 X 726(WXH) and these will be made of 18mm thick MDF board post formed finish with 2.0mm thick PVC Edge banding of matching colour on the edges.

Podium Wooden body Size : 2’ x 2’ x 4’ Make – Excellaro Model EXCL-6000 Fully integrated smart Podium having inbuilt amplifier, in-built Speakers, in-built Woofers, in-built tweeters, goose neck mike, cordless hand mike, Reading light, Timer watch, Finish Matte, Coasters, Shock Proof Body, Power Cord, Elegant Black Colour, Organization Logo in fibre glass and all other hardware/accessories as per design.

Auditorium Chair zip cover for Seat & back seat size : 450 x 450mm back size : 450 x 560mm Seat & back upholstery covered shall be 100% cotton fabric construction with zipped type for ease of maintenance.

Single Drawer for Table Size : 380 x 200 x 480mm (L x W x H) All structure & shutter 18mm thick prelaminated particle board with 2mm thick PVC edge banding finish. Drawer have Hettich make lock and drawer runner channel.

Conference Chair Providing conference chair, chair with low back support chair, chair base made out with Pipe stand. Chair seat and back structure duly made with medium density foam covered with fabric tapestry, chair having two nos. of arm made with PU base and fix at seat & back with the help of screw. Seat Width :50 cm, Depth :46 cm, Back width 50 cm & Height 48cm and floor to seat height 48cm.

DESK & BENCH AT DHANWANTRI OPD BLOCK

DESK FRAME: The Complete MS section to be powder coated in approved EP based high gloss colour& shade. Vertical supporting pipe is to be made of 80*30 mm elliptical shape pipe with 2.0 mm wall thicknes to be connected with 50*50*1.6mm horizontal supporting pipe and 1.2mm thick modesty. Front of the seat, perforated curved modesty with both side of vertical pipes. 20*20*1.6mm square pipe to be used for strengthening the border of modesty. the front row have full MS modesty panel. 25*3mm MS angle shall be used for top supporting. which shall be connected, one part with the table top and another from modesty border pipe. All arrangement to be connected with zinc coated rust free 6.0 mm fastener and bolt. All steel structural components shall be processed and made from virgin material sourced from SAIL/Tata Steel/Jindal or equivalent Manufacturer. SEAT FRAME: Seat frame shall be made from 80*30 mm elliptical shape pipe with 2.0mm wall thickness supported in seat frame Border of modesty pipe made out of 20*20*1.6mm square shape. Seat frame mounting pedestal to be used like a desk frame. Seat shall be mounted on 22.0mm dia. & 1.6mm thick pipe.. All steel structural components shall be processed and made from virgin material sourced from SAIL/Tata Steel/ Jindal or equivalentmanufacturer.

DESK TOP: Desk top to be made of 25mm thick commercial ply with 1.0 mm thick laminate and all the four side covered with Rehau make 2.0mm thick pvc edge beading of the same colour. Table top height shall be 750 mm from floor level. Top bottom face to be screwed with top supporting angle. Rest all size as per sample available at site/layout. BENCH SEAT : Seat height shall be as per sample available at site/layout. Desktop to be made of 25 mm thick commercial ply with 1.0 mm thick laminate and all the four side covered with Rehau make 2.0mm thick pvc edge beading of the same colour. Seat shall be screwed with the seat supporting pipe of size 25*1.6mm. Rest of sizes as per layout/sample available at site. WOODEN : Ply board and Laminate shall be sourced from reputed manufacturers like - Greenlam, marino or its equivalent duly treated with anti termitetreatment. BASKET : Basket shall be Made of 6mm thick Mild steel rod, making a curved basket, connected with the 50*50 mm square pipe support. FIXING :Fixing at site to be done with metal dash fasteners of 100*08 mm size grouted with approved quality chemical filter compound such as Hilti or equivalent complete as per the direction of the Engineer incharge. Pedestal made of pressed steel base and shall be ribbed with 2 counters sunk holes for floor fixing. Apart from above, all specification will be as per approved sample available at site. All bidders ensure that quoted rates and other information should be as per available sample and no variation will be acceptable from the same. Any difference in specifications in above specification and sample available at site, the specifications as per approvad sample available at site will be applicable.

Student Table Size : 675 x 525 x 800mm (L x W x H) Supply of Study Table with following specifications Table top 18mm Thick Particle Board of Action Tesa/Green Lam / Merino with postformed finish rest flat edges duly covered 2.0mm thickPVC edge banding finish. Table front & shelf made out with 18mm thick prelaminated particle board with 2.0mm thick PVC edge banding finish.Table supported on 25 x 25(Tolerance + & - 2mm) MS square tube.Wall thickness 1.5mm

Student Chair Size : 450 x 450 x 500mm (L x W x H) Supply of Study Chair with following specifications Seat & back made out of 18mm Thick Particle Board of Action Tesa/Green Lam / Merino with postformed finish rest flat edges duly covered 2.0mm thickPVC edge banding finish. Table supported on 25 x 25(Tolerance + & - 2mm) MS square tube. Wall thickness 1.5mm