Rajasthan State Road Development And Construction Corporation Limited Tender

Linear Table with padestal as per layout / drawing (4 seater) size : Minimum width 600 mm & as per site measurement The top surface made out of 25mm thick prelaminated Particle board four side edge band finish all four side edge band 1.3mm thick matching colour PVC Edge banding. The main top rest on one side legs and one side 3 drawer padesal unit .Flat edge duly sealed with1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. The side panel & modesty is 18mm thick pre laminate particle board all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All the PVC edge beading should have press through 200 ° Temperature PUR glue by automatic through feed edge banding machine with corner rounding function. The all table should contain adjustable screws is provided at the bottom of the legs for Level adjustment. Grommets (cutouts) is provided on table top for cabling. Grommets is provided with PVC cover. The three drawer pedestal unit size: 725(H)x380(W)x450(D) shall made out of 18mm thick pre- laminated board, having three number of drawer units, the two top units of 6” depth each and the bottom drawer of 15” depth. The front shutters matching with top surface in quarter round post forming on the right and left side and all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Drawers are provided with full extension telescopic ball bearing slide channels. Pedestal is provided with single central locking system including necessary hard-wares, handle locks etc. The entire table & side unit is complete in all respects and made as per specification and as directed by engineer-in-charge.

Visitor Sofa

3 Seater :Size : 1880 x 785 x 730 (L x D x H)

2 Seater size : 1370 x 785 x 730 (L x D x H)

Providing three & two seater sofa, sofa structure duly made with SS pipe 202 grade frame (1.2mm thick) finish, sofa internal structure duly made with pine wood and fix at steel structure with the help of self tapping steel screw, sofa having seat 40 & back 32 medium density foam and all foam duly covered with PU leathrite tapestry/ fabric tapestry, sofa having in bottom four nos. leg of nylon steps for anti-skid on floor.The entire Sofa is complete in all respects and made as per design and as directed by engineer-in-charge.

Office Table with Three Drawer Pedestal & Side Unit Main table Size-1650(W)X750(D)X750(H) mm. The main table of size 1650 x 750 mm with the top surface made out of 25mm thick Particle board with half round shape post forming on front and the rear side with 0.6mm thick laminate pasted on it and the rest of the sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side. This main top rest on one side legs and one side 3 drawer padesal unit .Flat edge duly sealed with1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. The side panel & modesty is 18mm thick pre laminate particle board all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All the PVC edge beading should have press through 200 ° Temperature PUR glue by automatic through feed edge banding machine with corner rounding function. The all table should contain adjustable screws is provided at the bottom of the legs for Level adjustment. Grommets (cutouts) is provided on table top for cabling. Grommets is provided with PVC cover. Side unit size-900(W)X450(D)X750(H) mm. Top made up of 25mm thick Particle board with half round shape post forming on front side with 0.6mm thick laminate pasted on it and the rest of three sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side.The side panel is 18mm thick pre laminated particle board on both sides all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges.All unit having two hinge door, back and fixed shelves are made up of 18mm thick pre laminated particle board Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All the PVC edge beading should have press through 200 ° Temperature PUR glue by automatic through feed edge banding machine with corner rounding function. The side unit should contain adjustable screws is provided at the bottom of the legs for Level adjustment. three drawer pedestal unit size: 725(H)x380(W)x450(D) shall made out of 18mm thick pre- laminated board, having three number of drawer units, the two top units of 6” depth each and the bottom drawer of 15” depth. The front shutters matching with top surface in quarter round post forming on the right and left side and all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Drawers are provided with full extension telescopic ball bearing slide channels. Pedestal is provided with single central locking system including necessary hard-wares, handle locks etc. The entire table & side unit is complete in all respects and made as per specification and as directed by engineer-in-charge.

Office Table with Side Unit Main table Size-1500(W)X750(D)X750(H) mm. The main table of size 1500 x 750 mm with the top surface made out of 25mm thick Particle board with half round shape post forming on front and the rear side with 0.6mm thick laminate pasted on it and the rest of the sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side. This main top rest on both side legs made out 18mm thicl prelaminated particle board finish all flat edge duly sealed with1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All the PVC edge beading should have press through 200 ° Temperature PUR glue by automatic through feed edge banding machine with corner rounding function. The all table should contain adjustable screws is provided at the bottom of the legs for Level adjustment. Grommets (cutouts) is provided on table top for cabling. Grommets is provided with PVC cover. Side unit size-900(W)X450(D)X750(H) mm. Top made up of 25mm thick Particle board with half round shape post forming on front side with 0.6mm thick laminate pasted on it and the rest of three sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side.The side panel is 18mm thick pre laminated particle board on both sides all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges.All unit having two hinge door, back and fixed shelves are made up of 18mm thick pre laminated particle board Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All the PVC edge beading should have press through 200 ° Temperature PUR glue by automatic through feed edge banding machine with corner rounding function. The side unit should contain adjustable screws is provided at the bottom of the legs for Level adjustment. The entire table & side unit is complete in all respects and made as per specification and as directed by engineer-in-charge.

Revolving Chair For HOD :- Supplying and placing in position chair of the following specifications. The cushioned seat assembly shall consists of insert moulded polyurethane foam (density 40 kg/cum,55mm thick) upholstered with foam laminated mesh fabric. The insert moulded foam is assembeled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-52cm, (H)-52.0cm & size of seat shall be (W)-51.0cm x (D)-52.5cm. Armrest are injection moulded with height adjustable. The mechanism of chair shall have following features:360 degree revolving type, Front pivot Synchro mechanism, Tilt tension adjustment, 3 position locking and seat sliding. Neck rest assembly shall made up of polyurethane foam upholstered with foam laminated mesh fabric. The neck rest assembly is mounted on the top of back it can be adjusted up to 4.5+/- 0.5cm up-down and has regular adjustment of 30 degree +/-2 .The pneumatic height adjustment have an adjustment stroke of 10.0 cm to 15.0cm. The Telescopic bellow assy:- The bellow is 3 piece telescopic type and injection molded in black polypropylene . The pedestal made of die-cast polished aluminium. it fitted with 5 nos twin wheel castor. The size of the pedestal 67.0 cm pitch-centre-dia(74.0 cm with castors). The twin wheel castors are injection moulded in black nylon. Overall dimensions of Chair shall be, Width of Chair - 74.0cm,Depth of Chair - 74.0 cm as measured from pedestal below.The entire chair is complete in all respects and made as per specification and as directed by engineer-in-charge.

Revolving Chair For staff : Supplying and placing in position chair of the following specifications. The cushioned seat assembly shall consists of insert moulded polyurethane foam(density 35 kg/cum, thickness 30mm) upholstered with foam laminated mesh fabric(220 GSM ). The insert moulded foam is assembeled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-48.5cm, (H)-62.0cm & size of seat shall be (W)-51.0cm x (D)- 52.5cm. Armrest Adjustable.The mechanism of chair shall have following features:360 degree revolving type, center tilt mechanism. Neck rest assembly shall made up of polyurethane foam upholstered with foam laminated mesh fabric. The neck rest assembly is mounted on the top of back it can be adjusted up to 4.5+/- 0.5cm up-down and has regular adjustment of 30 degree +/-2 .The pneumatic height adjustment have an adjustment stroke of 10.0 cm to 15.0 cm. The Telescopic bellow assy:- The bellow is 3 piece telescopic type and injection molded in black polypropylene .The pedestal is injection molded in black 30% glass filled Nylon. A 10.5 mm dia forged bright zine plated M.S. caster pin pressfitted into each prong for holding the castors. The pedestal shall be 700 mm pitchcentre- dia. (750 mm with castors).The twin wheel casters are made of nylon . Overall dimensions of Chair shall be, Width of Chair- 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below.The entire chair is complete in all respects and made as per specification and as directed by engineer-in-charge.

Revolving Chair for Conference Table : Supplying and placing in position chair of the following specifications. The cushioned seat assembly shall consists of insert moulded polyurethane foam(density 35 kg/cum, thickness 30mm) upholstered with foam laminated mesh fabric. The insert moulded foam is assembeled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-48.5cm, (H)-47.0cm & size of seat shall be (W)-51.0cm x (D)- 52.5cm. Armrest Adjustable.The mechanism of chair shall have following features:360 degree revolving type, center tilt mechanism. The pneumatic height adjustment have an adjustment stroke of 10.0 cm to 15.0 cm. The Telescopic bellow assy:- The bellow is 3 piece telescopic type and injection molded in black polypropylene .The pedestal is injection molded in black 30% glass filled Nylon. A 10.5mm dia forged bright zine plated M.S. caster pin pressfitted into each prong for holding the castors. The pedestal shall be 700 mm pitchcentre- dia. (750 mm with castors).The twin wheel casters are made of nylon . Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below.The entire chair is complete in all respects and made as per specification and as directed by engineer-in-charge.

Visitor Chair : The cushioned seat assembly consists of insert moulded polyurethane foam(density 45 kg/cum, 50mm thick) upholstered with foam laminated mesh fabric. the insert moulded foam is assembeled over a load bearing ply of 12mm. The back made up of two piece injection moulded frame with lumber support. The inner frame is upholstered with mesh fabric and mounted on the main assembly. Size of seat (W)-51.0cm x (D)-52.5cm. Armrest made of injection moulded polypropylene.The sled base leg frame welded assembly made from SS 202 square tube of 24x24mm or round tube of 25mm dia with 1.2mm thick with base plate for seat fixing. All the metal parts have free from the dent, burrs and sharpedges removed. The entire chair is complete in all respects and made as per specification and as directed by engineer-in-charge.

Over head storage

size : 2000 x 380 x 840mm (Single unit with 4 Hinged Door) above Linear table

size : 2400 x 380 x 840mm (Single unit size : 1200 x 380 x 840mm - 3 nos.) each unit 3 Hinged door

size : 1650 x 380 x 840mm (L x W x H) 4 Hinged Door

All storage 18mm thick prelaminated Particle board with four sides edge banded with 1.3mm thick matching colour PVC Edge banding. The side panel is 18mm thick pre laminated particle board on both sides all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Each unit have auto close hinged door, back and fixed shelves are made up of 18mm thick pre laminated particle board Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All the PVC edge beading should have press through 200 ° Temperature PUR glue by automatic through feed edge banding machine with corner rounding function. The entire storage is complete in all respects and made as per specification and as directed by engineer-in-charge.

Office Table with padestal

size : 1050 x 600 x 750mm (L x W x H)

size : 1200 x 600 x 750mm (L x W x H)

The top surface made out of 25mm thick Particle board with half round shape post forming on front and the rear side with 0.6mm thick laminate pasted on it and the rest of the sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side. This main top rest on one side legs and one side 3 drawer padesal unit .Flat edge duly sealed with1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. The side panel & modesty is 18mm thick pre laminate particle board all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All the PVC edge beading should have press through 200 ° Temperature PUR glue by automatic through feed edge banding machine with corner rounding function. The all table should contain adjustable screws is provided at the bottom of the legs for Level adjustment. Grommets (cutouts) is provided on table top for cabling. Grommets is provided with PVC cover. The three drawer pedestal unit size: 725(H)x380(W)x450(D) shall made out of 18mm thick pre- laminated board, having three number of drawer units, the two top units of 6” depth each and the bottom drawer of 15” depth. The front shutters matching with top surface in quarter round post forming on the right and left side and all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Drawers are provided with full extension telescopic ball bearing slide channels. Pedestal is provided with single central locking system including necessary hard-wares, handle locks etc. The entire table is complete in all respects and made as per specification and as directed by engineer-in-charge

CONFERENCE TABLE

Size : 4500 x 1200 x 750mm (L x W x H)

Size : 4800 x 1200 x 750mm (L x W x H)

Table Top: The table top would be made out of 25mm thick Prelaminated Particle board with four side edge banding finish. and the rest flat edge duly sealed with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side. Front Cover: The front cover of the table is made of 18mm thick pre laminated particle board with four side edge banding finish matching with the color of the tabletop. Legs: The top is supported by six leg would be made out with25mm thick Prelaminated Particle board with four side edge banding finish. and the rest flat edge duly sealed with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side.

Storage for conference room size-6900 (W)X450(D)X750(H) mm (6900 (W) is approx.(single storage size : 2300 x 450 x 750mm - 3 nos. with 5 nos. hinged door) before production take actual masurement. Top panel made up of 25 mm thick three layer pre laminate particle board all flat edge duly sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Rest all structure 18 mm thick three layer pre laminate particle board . Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Storage unit have one fix shelve & openable shutter with auto close hinges. The entire table is complete in all respects and made as per specification and as directed by engineer-in-charge.

Setti cum Storage for confrence room:- size-2400 (W)X380(D)X450(H)mm with cushion All structure 18 mm thick three layer pre laminate particle board . All flat edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Storage have 6 Drawer with full extension telescopic ball bearing slide channels. Storage having 100mm thick cushion for seating pupose The entire storage is complete in all respects and made as per specification and as directed by engineer-in-charge.

TV Console size : 1800 x 450 x 750mm (L X W X H) Top panel made up of 25 mm thick three layer pre laminate particle board all flat edge duly sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Rest all structure 18 mm thick three layer pre laminate particle board . Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Console have 4 Drawer with full extension telescopic ball bearing slide channels & 2 openable shutter with auto close hinges. The entire console is complete in all respects and made as per specification and as directed by engineer-in-charge.

Center Table size : 1200 x 600 x 450mm (L x W x H) Table top: Table top made out with 18mm thick prelam particle board with fourside edge band finish.The whole table is supported on four leg and equal size which are made out of 18mm thick prelaminated particle board with PVC edge banding of matching color. Table having 8mm thick black tinted glass. The entire table is complete in all respects and made as per specification and as directed by engineer-in-charge.

Lab stool size : 20.5 inch x 40 inch (Maximum Height & width outer to outer) size : 31 inch x 40 inch (Minimum Height outer to outer) tolerance in width & height (± 3 inch) Lab stool 3 inch comfortable & long lasting PU leathrite tapestry cushioned seat, adjustable height, 360 deg. Revolving, Base structure chrome plated pipe frame.