Rajasthan State Road Development And Construction Corporation Limited Tender

ISI 9 mm teak ply one side BWR

Providing and fixing Nigeria / Ghana /Ivory Coast Teak wood grade-I mouldings and beadings in doors and windows size :-

50x20 mm

Cement plaster in skirting and/dado 18 mm thick with cement mortar 1:3 (1 cement : 3 course sand) finished with a floating coat of neat cement including rounding of junctions with floor .

Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System with (Bevelled Tegular) EDGE TILES WITH 15 mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99% NRC 0.5, Light Reflectance _85%, Thermal Conductivity K =0.052-0.057 w/m K, Colour White, Fire Performance UK Class 0/Class 1 (BS 476 Part 6 & 7), in module size of 600 x 600 x 16 mm, suitable for Green Building application, with Recycled content of 32 %. The tile shall be laid on Silhouette profile grid system with 15 mm white/black flanges incorporating a 6 mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kgs/Sqm minimum pull out strength of 100 kgs. Silhouette, Main Runners & Cross Tees to have mitred ends & "birdsmouth" notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per sqm and need to be installed with suspension system of make. The Tile & Grid system used together should carry a 30 year warranty. INSTALLATION :- To comprise main runner spaced at 1200 mm centres securely fixed to the structural soffit using suspension system (Specifications below) at 1200mm maximum centre. The First/Last suspension system at the end of each main runner should not be greater than 450 mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600 mm module to be formed by fitting 600 mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450 mm maximum centers. SUSPENSION SYSTEM consisting of M6 Anchor Fasteners with Vertical Hangers made of Galvanised steel of size 26 x 26x 25x1.2 mm with a Galvanised Thickness of 80 gsm, A pre Straightened Hanger wire of dia-2.5 mm of 1.8 m length., thickness of 80 gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8 mm thick, galvanised spring steel for 2.68 mm with a minimum pull strength of 110 kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner.

Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting.

Providing and Fixing Cushion Vinyl/Fully flexible Vinyl Flooring confirming to I.S.-3462 Flooring of approved make with fibre base using rubber base adhesives including rolling with light wooden roller complete :

2.0 mm thick.

Providing and applying Melamine polish on teak wood work of approved brand and manufacture to give an even shade with two or more coats by compressor including sand papering, wood filler coat etc complete in all respect:

New Surface

NON BSR ITEMS:

Supply & installation of Salon Slats surco made of pinewood EI grade fiberboard melamine/veneer laminated finish, groove perforated slats L8-2 -(2mm grooves @8 mm centers with 52% open area) / L16-2 - (2mm grooves @16 mm pitch with 27% open area)/ L32-2- (2mm grooves @32 mm centers with 15% open area)/L64-2-2 (2mm grooves @ 64mm centers with 8% open area), backlined with soundtexblack acoustical fleece of 0.27 mm thick surface density 63g/m2, tounge-groove edge for a seamless look, 5-test fire retardant grade, size 128x2440x16mm, volume density of base board 700Kg/m3, weight is 9Kg/m2 (L16), 10.5Kg/m2 (L32), 11Kg/m2 (L64) installed by useing Strut framework system. The Strut framework system shall include Strut CC25, fully knurled, sectiional thickness 0.55mm, length 3600mm web 50mm depth of 25mm and equal flanges 15mm is fastened to the wall positioned vertically at every 600mm centers. Strut CC 18 , Aluminium corc cross channel, thickness 0.5mm length 2400mm web 15mm & 27 mm, depth 18 mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the Strut CC25 with the help of fasteners at every 400mm centers. Slats Surco Plus of size 128x2440x16 mm in then fixed perpendicular to Strut CC 18 with suitable edge & centre brackets. Contractor to provide expansion joints of 3mm at every 4.88m length wise and 4.992m width wise. Note Wooden packing of appropriate thicknes to be provided at rear of strut to bring finish inline with Stretch NRC finish. The work will include required scaffolding upto all height, wire chicken mess etc complete

Supply and installtion of Stretch NRC system consisting of FR Grade NRC fabric with high performance Polypropylene core and acoustically ransparent face covering of choice colourn size 1.7mx75m, stretched by using combinationof Strand 2 primer 600x1200x200x thick. Strut FS15 trak, Synth PF 10x25 infill with requisite accessories on studd framework system.The Strut framework system shall include Strut CC25, fully knurled, sectional thickness 0.55mm, length 3600mm web 50mm depth of 25mm and equal flanges 15mm is fastened to the wall or framework beind horizontal at every 600mm centers. Strand2 primer 600x1200x200mm thick is then fastened perpendicular to strut CC25 behind with suitable fastners Wooden base 12mm is then installed on Strand2 primer above the marking lines, with metal fasteners at 300mm centres. FS15 tracks to be installed on wooden base by first applying stick S7 adhesive on both surfaces for a true and continuios secure grip and heavy duty fasteners at 150mm cetres on one/both sides of Strut Tracks.SynthPF 10x25 mm is then adhered on Strand2 primer with stick S7 adhesive in between tracks. This complete the substract to receive the Stretch NRC acoustical fabric. The Stretch NRC acoustical fabric of width 1.7 m is stretched and tucked into the Strut Trqacks and secured to the locking jaws with puppose specific tucking tools to obtain smooth taut wrinkle free finish. Ensure the weft and weave of the fabric along with the surface are all oriented in one direction to achieve uniform shade. The work will include required scaffolding upto all height, wire chicken mess etc complete

Providing and fixing of Carpet as per following specification Construction : Machine Tufted Cut pile pile weight : 1350 GSM, total weight 1810 GSM, Pile Height 7 to 8 mm (+/-5%) Pile Fiber Contents : 100% Heatset Nylon (2 Ply yarn), Yarn Type Class - 1 Nylon 6 yarn, Stitch Count : 9.33 SPI, Gauge Inches : 1/10 inches : 1/10 inches, Printing technique : Chromo Jet Printing,Primary Backing, : Woven Polypropylene.

Providing and fixing Armour foam undelay over the floor, Steps, passages before the carpet laying. Rate includes all necessary adhesives brushing and cleaning of floor etc.

Auditorium Chair- Supply & Fixing of Auditorium Chairs with Following Specification General: Fabricaste Auditorium seating with padding fabric covering Equip each seat with a self rising Gravity compensating mechanism so that unoccupied seats rturn to an upright position perpendicular to the base line of fillor of auditorium. Chair profile with the seat in the upright position. The Seat Size should be 50 cm x 45cm & the Back size should be 45cmx56 cm with ergonomically designed seat and back cushions. Where back height is required to be 9.25 mm from ground to achieve the Clear Eye sight and Seat envelope should be not more than 20" to achieve ease of exit in emergency cases

Seat Construction: Seat construction is comprised of an inner upholstered tubular welded frames made yp by 2cmx2cmx0.16 thick ERW tubes and Securing Metal webs. The inner Seat Cushioning to be secure by 50+/- 5 Kg Denisty High Pressure Moulded Polyurethane Foam shall be applied over the Powder Coated Metal Frame assembly. Assembly consist of a front layer of 32 Density foam for extra Comfort by making dual density cushion assembly. For Foam shall be fire retardant and conform to the California Bureau of Home Furnishing Technical Bulletin 117 to secure maximum safety in event of fire. The upholstery cove shall be 100% Polyester Dyed Fabric with 3 Layer Fabric+Foam+Fabric Construction, Sewn and fitted to the seat assembly Zipped type upholstery for ease of maintenance. Seat size: 50.0 cm (W) X 45.0cm (D) X12.0 cm (T) @front edge and 8.0 cm @ Rear edge.

Back Construction: Back construction is comprised of and inner upholstered tubular welded frames made up by 2cmx2cmx0.16 cm thick ERW tubes and Securing Metal webs. The inner Seat Cushioning to be secure by 50+/-5 Kg Density High Pressure Moulded Polyurethane Foam shall be appiled over the Powder Coated Metal Frame assembly + Back Assembly consist of a front layer of 32 Density foam for extra Comfort by making dual density cushion assembly. Foam shall be fire retardant and conform to the California Bureau of Home Furnishings Technical Bulletin 117 to secure maximum safety in event of firm The upholstery cover shall be 100% Polyester Dyed Fabric with 3 Layer Fabric+Foam+Fabric Construction, Sewn and fitted to the assembly Zipped type upholstery for ease of maintenance.

Metal Stands: Frame shall be 5 cmx2.5cmx0.16 Cold rolled welded steel tubing formed steel bracktes welded into one interral freestanding structure upon which the seat, back and arms are assembled. Floor mount plate shall be 0.6cm thick hot-rolled steel base plate mounting anchors, All Exposed Metal part need to do high quality of powder coating of black matt finish to pervfent lustre.

Armrests: Armrest should be available in various options like, Plastic-PPC,P Waterfall design, Plastic HDPE Blown Classic Design, Plastic PPCP Cup holder Armrest PU Waterfall design, PU Waterfall design, Soild Wooden Polished etc, option to client's choice

E) SLIDING MECHANISM (Push Back):The sliding mechanism is fabricated from M.S. sheets forming linkage providing a 4-bar sychronons motion for the seat & back and has a special feature of upright resistance lock to avoid activation of sliding feature unless enough force is applied by user when titting is required. The roller is made up of nylon for ease of movement in seat.

Hinge: The hinge should be slim profile to provide maximum space to seating area, containing sound damping feature when seat tip up and down by PU pads with 82 Density. The hinge should be fully covered by hard plastic coating to avoid rust and anti-friction feature.

Fixing: Fixing at site to be done with metal dash fasteners of 125*12mm size grouted with approved quality chemical filter compound such as Hilti or equivalent complete as per the direction of the Engineer in charge. Pedestal made of pressed steel base and shall be ribbed with 2 counters sunk holes for floor fixing. Apart from above, all specification will be as per approved sample available at site. All bidders ensure that quoted rates and other information should be as per available sample and no variation will be acceptable from the same. Any difference in specifications in above specification and sample available at site, the specifications as per approvad sample available at site will be applicable. The product should bear green pro certificate for this product and should be BIFMA memeber having AIOTA for Auditorium furniture for ergonomic design.

P/F hard wood such as sal wood or as directed by consultant, scanting of 3"x4" in base frame work for both ways. The hard wood shall be of approved quality (kiln seasoned up to 8 to 9% moisture content and treated with chemical treatment) scanting shall be places require distance and rigidly fixed in position with cemented teak wooded gutties and m.s. screws at 600 mm c/c. in each direction/member. the frame work shall be interconnected in approved manner at the junctions including planning the top and painting the wood work with two coats of black japan paint all around etc. complete with necessary scaffolding the work shall have to be carried out with all labour and materials as per drawing and as directed by E.I.C. Including filling dry sand between frame work.The work will include required scaffolding upto all height, via chicken mess etc complete

P/F 150x37 mm (6"x 1 1/2") out of secret T& G.(as per detail given by consultant). Scientific kiln drying to under 8 to 9% moisture content teak plank (free from knot, wrap and bend etc.) as per drawing and instructions stated belo etc.

(a) complete lot of indian teak plank shall have scientific kiln drying upto 8 to 9% moisture content. Then after plank shall be 1800in length x 150x37mm plank shall be fixed by screw in secret groove. Process shall be sent for moisture check in approved laboratory and report shall be put on record. plank shall be fixed

(b) Applying three coats of matt finishing melamine polish on wooden flooring complete with machine sending and levelling. Appluing hard putty filling gaps etc. and necessary polishand shading and again sending by machine and polish upto required shade and level.

Providing & fixing 100 mm thk. Acoustical door with frame for Theatre shutter finished with Laminate on both side. Door shall be made in Saal wood frame in 75 x 35 frame Frame shall have both side 12 mm thk. commercial Ply with 0.8 mm Laminate on both side and Glass wool of 50 mm thk-2000 D shall be kept between wooden frame (including glass wool) Door shutter have two rebated having thin flat lining for making air tight door Fixing 3mm thk TECSOUND or equvalent insulation layer in between two frame. Door shutter to have following brass fittings & fixtures Heavy duties railway type oxides brass hinges 150 x 50 x 6 mm 3 Nos. 12 mm dia 300 long top, 12 mm dia 300 mm long bottom oxidized tower bolt. 65 mm. brass dead lock. Handle - 750 mm long as approved by Engineer-in-charge 4 Nos. Door Size 125 mm thk and installation including door frame complete as per direction of Engineer-in-charge. The work will include required scaffolding upto all height, wire chicken mess etc complete

Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS-316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make. Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates. fastener, anchors, SS channel laminated glass etc. all complete.

Providing and foding fully glass door with patch fitting door. Door shall consists of 12mm thick PLAIN toughened float glass (saint Globin) fixing with necesary designer film, approved locking system, ss screws, gasket & heavy duty floor springs and 25mm dia ss full length door handles pair as selected as per architectural detailed drawings and specifications and as directed by E.I.C. The work will include required scaffolding upto all height, via chicken mess etc complete

For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured

Providing and fixing designer false ceiling as per design at all height including providing and fixing of frame work made of special sechons, power pressed from MS sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per 15 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 min and 37 al 1200 mm centre to centre, one flango fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia boits other flange of clear fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & balts of required size and other end of angle hanger fixed with intermediate GI channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.1 intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long GI. wire at every junction including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c. including jointing and finishing to a flush finish of tapered and square edges of the board with recurramended jointing compound.

Jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for tight fittings, grills, diffusers cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12.5 mm thick tapered edge glass reinfoced Gypsum (GRG) board confirming to IS 2095 (Part 3) 1996 (board with BIS certification marks) The work will include required scaffolding upto all height, via chicken mess etc complete

Supply and Installation of Pixel Sesery perforated GFR gypsum panels, consisting of Pixel 0308 panel, backlined with acoustical fleece, having 3x3min square perforations ( 8.33mm pitch-8% open area. vize 1200x2400x12.5mm tapered long edges. volume density of base board 700 Kgs/m3, weight 9Kgs/m2 finished with Smery acoustical fleece, size 1000x25000x0.75mm and acrylic paint (Paint not by ) installed by using Strut ceiling framework The Strut ceiling framework system shall include Strut WC25, fully knurled, sectional thickness 0.55mm, length 3600mm, unequal flanges of 20 & 30mm and web of 25mm, fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300mm centers Then suspend Strut MC45, fully knurled, sectional thickness 0.8mm, length 3600mm, equal flanges of 15mm and web 45mm from the soffit at 1200mm centers with Strut SA25, fully knurled, Suspender angle with sectional thickness 0.55mm, unequal flanges of 25 & 10mm such that the Strut MC45 rests on the Sout WC25. Strut CC25, fully knurled, sectional thickness 0.55mm, length 3600mm, web 50mm, depth of 25mm and equal flanges 15mm is fastened to the Strut MC45 perpendicularly at 600mun centers for upto RH70, at 400mm centers for RH70-RH90 and at 300mm centers for RH90 and inserted inside the Strut WC25 at the perimeter. Antone Pixel 0308 panel is installed on the Antone Strut CC25 with suitable fasteners at 600/400/300mm centres The tapered long edges are then filled and finished with Seam AJC and tape (tape not by ). The short square edges are also similarly finished but no tape. Apply one coat of white primer (not by ) with roller brush evenly across the Pixel surface to achieve uniform colour.

Smery fleece Installation: Apply vinyl glue thinly, evenly and fully on Pixel to receive the Smery acoustical fleece Cut Smery rolls with sharp knife to required size .Paste the Smery on Pixel and smooth it with plastic rasper. Ensure butt joints between successive drops are fine and level. Wherever Smery joints are aligned with Pixel perforations ensure to block/close the perforations by using Seam AJC to achieve smooth surface below the joints. Smery is finished with approved colour water base acrylic paint by using roller brush. Paint a second finishing coat on the Smery when the first coat is dry.(Paint not by ) The system is backlined with the acoustical infill SynthPF 10x25. The work will include required scaffolding upto all height, via chicken mess etc complete

Providing and Fixing Roller Blind curtain fixed at window level and curtain lift with pvc bead rope, design and colour as per instruction by engeer-in-charge with necessary hardware fitting, material and labour etc. complete. (Vista or equivalent) The rate shall include all materials, hardware and lobour etc. complete as per instruction of engineer-in-charge and consultant

Providing and Fixing of Aluminium extruded slotted angle on edges of kota stone steps edge for carpet fixed with fastner complete as per direction engineering incharge

Supply installation testing and commission of concealed can action door closer with G 96N slide channel arm with standard spline. Including cushioned limit stay, spring size EN 3-6 as per EN 1154 and CE market silver finish non handed version. Leaf thickness equall ore graeter to 50mm max. door width 1400mm with mechanical hold open unit G96 N with on/off feature, adjustable engage and relase force.

Podium Providing and fixing in position podium of size 2'-0"x 1'-9x4'6" by using 25mm thick plywood for top and 18 mm thick plywood for all other horizontal and vertical members. Footrest made with T.W. member of size 4'x 1 W finished with french polish. All exposed plywood surfaces to be finished with 1 mm thk. laminate of approved make & shade, and all exposed edges of table top & ply verticals to have 1" x 1/4" T.W. lipping. All exposed T.W. sections to be melamined and internal surfaces to have white enamel paint as directed. Item to include plywood (Mayur, Green or equivalent ply boxing, all necessary hardware and fittings in Stainless Steel 304 finish, lipping to all edges etc. complete in all respects.

TARAFLEX SPORTS M COMFORT- 12 MM THICK Supply and Installation of 12mm thick TARAFLEX SPORTS M COMFORT Synthetic sports surface it consist of five mm Polyolefine foam and seven mm thick synthetic floor which consist of 100% pure vinyl wear layer not less than two mm thick, protecsol and sanosol treated to reduce Skin burn with double fiber glass grid for sound stability on floor and 5 mm CXPTM HD double density foam backing with D-MAXTM+ ensuring highest possible resistance to indentation, durability and energy return, width of sheet is 1.5 M joined with seamless Hot welding. Laid with adhesive as per manufacturer's instruction over existing levelled surface including game lines marking with following specification. Shock absorption under EN 14808 standard not less than 45%, Ball bounce under EN 12235 standards not less than 90% Abrasion resistance as per EN ISO 5470-1 shall be 350 mg. coefficient as per DIN-16032 0.4-0.6, resistance as per DIN 16032 7 N/m., Sound isolation shall be 23 dB. tratment to to reduce Skin burn and easy to cleaning. Approved By :- WBF (World Badminton Federation). FIBA (Federation International Basketball Association). FIVB (Federation International Volley ball). IHF (International Handball Federation). The work will include required scaffolding upto all height, via chicken mess etc complete

Providing and fixing of 1 pair Badminton Nets/poles as per standard practices as approved by Sports Council including requisite marking etc complete in all respect as directed by

SITC of Grand drape pre fabricated heavy duty Type vertically operating system with load carryong capacity 200 kg/mtr. of 20 mtr x 8 mtr in length and height., vertical parting provided with Heavy duty prefabricated modular curtain complete with mounting brackets Specially designed compact gear box Electromechanical drive unit with 1 HP Motor, Gi wire ropes of 4 mm in diameter constructed with 7 bundles of 7 strands with fibre core at centre, with Curtain holding system throughout the curtain with Upper and lower limit controller System to be complete with necessary Divertor and tension pulley. Fabric not included here. Make: Effectron/ keya Lights

SITC of Rear curtain drape pre fabricated Zinc passivated Modular MS Curtain Rail of 115x90mm heavy duty Type track system with load carryong capacity 200 kg/ mtr. of 15 mtr x8mtr. in length and height. centre parting with overlap of 0.6 mtr provided with Heavy duty prefabricated and modular curtain track complete with mounting brackets. Electromechanical drive unit with 1HP Motor, Gl wire ropes of 4 mm in diameter constructed with 7 bundles of 7 strands with fibre core at centre, Curtain holding trollies consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm throughout the curtain track System to be complete with necessary Divertor and tension pulley Fabric not included here Make Effectron/keya Lights/Canara Light

SITC of MS Wings Frame, made out of 50X25mm MS rectangle pipe with 1.6 mm in thickness painted of 6.5m x 1.2m. The wing be fabricated using welding construction with a centre vertical member at 600mm. Horizontal members be fixed every 900mm. The Frame to be primered with two coats of Red Oxide and painted with Black enamel paint. The wing will be faxed on the front side with 6mm Commercial Ply on the front side, the frame is then covered with Black/or approved shade Fabric on either side. The wing be suspended from the ceiling grid using required structural steel, a central Pivol. The Necessary Bolt be provided to park the wing in a given place Make Effectron/ keya Lights

SITC of Frill bar for Frills of 10 to 13 mtr. length, made using 40NB undergone through various chemical treatment to keep them rust free and finished with two coats of Red Oxide primer and one coat of enamel paint Make Effectron/ keya Lights

SITC of Motorised winch to use as Utility bar of 10 mtr. made using 40NB dual barrel undergone through various chemical treatment to keep them rust free and finished with two coats of Red Oxide primer and one coat of enamel paint and provided with: Necessary pulley, guide pulleys Gl wire rope with winding drum Specially designed compact gear box 0.5/1.0HP AC motor Upper and lower limit controller Average Length of Bar 8-10 mtr. With cable retractor & cable trays Make Effectron, Keya Lights

SITC of fabricated ladders of size 600 x 1500 mm made using 50x25mm MS Rectangle Pipe with 1.6mm thickness undergone through various chemical treatment to keep them rust free and finished with two coats of Red Oxide primer and one coat of enamel paint in between side wings Make: Effectron/ keya Lights

SITC of Valance arrangement of 20m in length consists of 40NB MS pipe undergone through various chemical treatment to keep them rust free and duly finished with two coats of Red Oxide primer and one coat of enamel paint with matt black finish with suspenders for frills For Main Frill Bar Make: Effectron/Canara/ keya Lights

SITC of Fire retardant cotton fabric, 100% gathering for Rear Curtain with approved colour duly stitched and with eyelets. Size: As per actual Fabric Make: Reliance /Nexgen/Innovative/Raymonds

SITC of Fire retardant cotton fabric, 100% gathering for Rear Curtain with approved colour duly stitched and with eyelets. Size: As per actual Fabric Make: Reliance /Nexgen/Innovative/Raymonds

SITC of Fire retardant cotton fabric for wings duly stitched wrapped all around with 0% gathering. Fabric Make: Reliance /Nexgen/Innovative/Raymonds

SITC of Fire retardant cotton fabric 100% gathering for frill with approved colour duly stitched and with eyelets. Size: required length x 1.2 M Fabric Make: Reliance /Nexgen/Innovative/Raymonds

SITC of Fire retardant velvette fabric 200% (2 times of the finished dimension) gathering for main valance with approved colour duly stitched of Size: required length x 1.0MIr. Fabric Make: Reliance/Nexgen/ Innovative/ Raymonds

SITC fabrication of cyclorama screen frame made by 40 mm and 25 mm MS pipe frame, and screen fabric made by PVC perforated high gain fabric with 75 mm border, eyelets, and fixing accessories Size: 36" x 18" customized.