Rajasthan State Road Development And Construction Corporation Limited Tender

Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).Category-I. Add extra over item No. 7.3, 7.4 & 7.5 for marble printed, granite shade tile.Add extra over item No. 7.4 & 7.5 for using 400mm x 400mm tiles or more

Providing and fixing wall paneling using soft wood frame of size 50x25 mm @ 600 mm c/c in both directions duly treated with antitermite treatment making grooves painting of grooves including nailing etc. complete as per specification and drawing using : 8 mm thick teak one side laminated fibre board (Phenol bonded).

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 16 kg/m3, 50 mm thick, held in position by chicken wiremesh and sandwitch between wall & wall panelling complete.

Providing and fixing clamps of required size shape for anchoring stone wall lining (veneer) to the backing or securing adjacent stone in stone wall lining (veneer) in cement mortar 1:2 including making the necessary chases made of : Copper

Supplying & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250x40x3mm fixed with M.S. bolt 5 mm dia 50 mm long duly embedded in cement concrete M-15 grade IS 4121-1967 :Ghana teak wood Grade - I

Providing and fixing fully paneled double leaf shutter for doors as per approved design and drawing with approved ordinary C.P./oxidized steel fittings as per Annexure – A’ and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mmx12mm on both faces complete IS 1003 (Part-I) 2003 : 35mm Thick, Ghana teak wood Grade- I , Wood grade- I Panels

Providing and fixing fully paneled double leaf shutters for windows and ventilators as per approved design and drawings with approved steel fittings as per Annexure ‘A’ and width of styles, bottom and top rails 75 mm including beading of 25mm x 15mm size on both faces IS 1003 (Part-II) 1994. 30mm Thick, Ghana teak wood Grade- I , 4mm thick Plain glass panels.

Providing and laying Melamine Polish of two or more coats to give on even shade on wood work with superior grade.

Providing and Fixing at all height all false ceiling of 12.5 mm thick tapered edge Gypsum board conforming to IS : 2095 including providing and fixing of frame work made of special section power pressed from M.S. sheet and galvanized in accordance with zine coating 600 as per IS : 277 and consisting of angle cleats of thick 25 mm wide x 16 mm thick with flanges of 22 mm and 37 mm at 1200 mm center to center one flange fixed to the ceiling with dash fastner 12.5 mm dia x 40 mm long with 6 mm dia bolts to the hangers of 25x25x5mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45 mm x 15 mm x 0.9 mm running at the rate of 1200 mm center to center to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm center to center shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm dia x 230mm long

G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm center to center with 25 mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of gypsum board with recommended filler paper tapes, finisher and two coats of primer suitable for gypsum board as per manufactures specifications and also including the cost of making openings for right fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specifications and direction of the Engineer-in-charge but the excluding the cost of painting.

Providing and Fixing Bearing Base door closure.

P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete.Flat Back (large) or half stall size 590x375x390 mm.

P & F C.P. brass Urinal Spreader for stall urinal of approved make.

Providing and fixing Premium quality CP Brass fittings Complete as per direction of Engineer Incharge Angular stop cock with long thread 15 mm nominal size

Providing and fixing Premium quality CP Brass fittings Complete as per direction of Engineer Incharge Hand shower with 8 mm dia 1 mt. long PVC tube & wall hook complete

Supply and fixing of Premium Quality wall hung-WC with UF seat cover, Hinges, accessories set size : 360x575x360 including single piece slim concealed cistern body and control plate fusion complete with all respect.

Providing Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS:458 mark) of approved make with collars, jointed with C.M. 1 : 2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete .200mm dia Internal

Providing and fixing sensor based locks with all accessories & card reading facility complete.

Providing and fixing Premium quality CP Brass fittings Complete as per direction of Engineer Incharge Sensor based pillar cock 15 mm nominal size