Rajasthan State Road Development And Construction Corporation Limited Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 31,04,000Document Cost
₹ 11,800Tender Fee
₹ 2,500
Summary
Sitc Of Accomplishment Of Hospital Services For Various Hospital Under Elect. Unit-ii Jaipur (package-ii)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_RSRDC_431861_1Tender No
RSRDCC NIT 335/2024-25 DATED 19.11.2024 SL No 02Tender Authority
Rajasthan State Road Development And Construction Corporation Limited ViewPurchaser Address
-Website
http://http://roads.rajasthan.gov.in/content/raj/roads/en/home.html
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
VARIOUS ACT CIRCULARS NOTIFICATION AND ORDERS
RS. 1000/- STAMP FEE FOR AFFIDAVIT
ANNEXURE A,B,C,D AND RTPP ACT 2012, ANNEXURE C
BOQ Items
SITC of Oxygen Manifold System (16+16) with tail pipes NRV -manifold system comprise of bank of 16+16 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 32 no's non return valves & 32 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag make CE Approved/CE certified Note : Providing of Cylinders is in the scope of Hospital / End Client.
2
192000
384000
S/1/T/C of Fully Automatic Oxygen Control Panel, as per HTM-2022/02-01 of UK NFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed)
2
425000
850000
SITC of Oxygen emergency system - Emergency manifold system comprise of bank of 6+6 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 12 no's non return valves & 12 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag. One High pressure Imported and approved make Double gauge regulator with manual pressure setting option and showing cylinder and line pressure make CE Approved/CE certified
Note : Providing of Cylinders is in the scope of Hospital / End Client.
2
72000
144000
S/1/T/C of Oxygen Outlets (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
385
4900
1886500
S/1/T/C of Oxygen probes (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
385
1472
566720
SITC of BPC (back pressure compensated) flow meter with humidifer made of nickel plated body , double jacketed with flow gradations marked on it . Desired flow will be setteled through rotary knob . Flow range should be between 0 to 15 1pm & work should be executed as per direction of engineer in charge .
314
1506
472884
MEDICAL NITROUS OXIDE SYSTEM
-
-
-
SITC of Nitrous Oxide Manifold System (4+4) with tail pipes NRV - manifold system comprise of bank of 4+4 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 8 no's non return valves & 8 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag make CE Approved/CE certified Note : Providing of Cylinders is in the scope of Hospital / End Client
1
26345
26345
S/1/T/C of Fully Automatic N20 Control Panel, as per HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
1
395000
395000
SITC of Nitrous Oxide emergency system - Emergency manifold system comprise of bank of 1+1 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 2 no's non return valves & 2 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag. One High pressure Imported and approved make Double gauge regulator with manual pressure setting option and showing cylinder and line pressure make CE Approved/CE certified
Note : Providing of Cylinders is in the scope of Hospital / End Client.
1
6586
6586
S/1/T/C of N20 Outlets (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) European CE with 4 digit notafied body no / UL Listed
8
4900
39200
S/1/T/C of N20 probes (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) European CE with 4 digit notafied body no / UL Listed
8
1472
11776
MEDICAL COMPRESSED AIR SYSTEM
-
-
-
S/1/T/C of Air Compressor with Compressed air plant complete pacakage unit total capacity 4500 LPM (imported) - as per HTM 2022/02-01/ NFPA99C as per enclosed technical specifications (European CE with 4 digit notafied body no / UL Listed
1
5835100
5835100
S/1/T/C of Air-4 Bar Outlets as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
78
4900
382200
S/1/T/C of Air-4 Bar probes, as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
78
1472
114816
SIIITIC of Air-7 Bar Outlets , as per HTM-2022102-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
7
4900
34300
SIIITIC of Air-7 Bar probes, as per HTM-2022102-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
7
1472
10304
MEDICAL VACCUM CENTRAL SYSTEM
-
-
-
S/I/IT/C of Vacuum central system with pump only complete pacakage unit total capacity 7500 LPM (imported) - as per HTM 2022/02-01/ NFPA99C as per enclosed technical specifications and list of approved makes (European CE with 4 digit notafied body no / UL Listed
1
3475100
3475100
SIIITIC of Vacuum Outlets , as per (imported)
HTM-2022102-01of UKINFPA99C of USA as per enclosed technical specifications - uropean CE with 4 digit notafied body no / UL Listed
385
4900
1886500
SIIITIC of Vacuum probes, as per (imported)
HTM-2022102-01ofUKINFPA99C of USA as per enclosed technical specifications - European CE with 4 digit notafied body no / UL Listed
385
1472
566720
SITC of suction unit (Suction Controller and Collection Jar) with posibility to configure required capacity capacity collection Jar and should meets the requirements as per BSEN ISO 100793:2009. The unit must designed to operate with the vaccum line of MGPS. The collection Jar must accumpained with Vaccum regulator suitable for 0-14.7 psig with flow rate 0-55 Lmp (min) for operating temperature - 18°C to 50°C with ON/OFF facility. The collection Jar should be transparent, made of high quality polycarbonate that can be autoclaved at 121°C for 20 minutes for reuse and provided with auto stop to avoid over spill and contamination of the suction source when the jar collection reached optimized level. The complete unit supplied with filter to protect the source and pipe line from bacterial contamination.
-
-
-
600 m1 Capacity collection Jar
314
2438
765532
Supply, Installation, testing & commissioning of Theatre
Vacuum Unit (2 jar nos capacity 2000 Ml) ( Imported) European CE with 4 digit notafied body no
4
41300
165200
SITC of MGPS of medically grade as per BSEN-13348 with third party certification from Lloyds/TUV, degreased (ie free from oil, grease and particulate matters) seamless copper pipe confirming to ASTM B88 and all copper joining done by brazing with AWSA5.8, classification BCuP-5 or BS 1845 following procedure in accordance with ASTM B828 after purging with nitrogen. All pipe cutting shall be carried out with a radial pipe cutter and copper pipe fitting's shall comply with B4 alloy designation. Adequate support shall be provided while laying pipeline testing shall be done at 17 bar and after testing pipe shall be painted with two coat of enamel paint as per colour codification as per ISO 7396-Part-I 2016.
6200
1987
12319400
SITC of Valve box made of CRCA sheet duly powder coated with transparent window which is installed in the MGPS for oxygen and vaccum line and should comply with ENIS05211:2001 complete with ball type valves and gauses as required for oxygen compressed air and vaccum line (three gas)
-
-
-
For Three gas
17
11778
200226
For Four gas
2
14380
28760
For Five gas
4
17119
68476
SITC of microprocessor based auto alarm system (digital type) suitable for medical gas service provided with audible and visual alarm for MGPS Zoning. It should monitors the current status of oxygen /compressed air pressure in distribution pipeline of central medical supply system and trigger the alarm to alert. The system should comply BSEN ISO:7396-1:2007
-
-
-
For Two Gas Services
10
11709
117090
For Three Gas Services
7
15612
109284
For Four Gas Services
2
19516
39032
For Five Gas Services
4
22255
89020
For Six Gas Services
-
-
-
SITC of non lubricated ball type GM Isolation Valve with adapter & PTFE Seat having quarter turn handle opening of following sizes suitable for flow capacity 1500 LPM at 4.7 bar with maximum allowable pressure of 30 bar and suitable for working temperature ranging - 20°C to 130°C.Valve should be CE approved/ CE certified.
-
-
-
For 12 MM OD pipe
385
848
326480
For 15 MM OD pipe
14
1103
15442
For 22 MM OD pipe
12
1357
16284
For 28 MM OD pipe
6
1867
11202
For 42 MM OD pipe
4
3139
12556
For 54 MM OD pipe
2
4751
9502
SITC of Bed Head Panel of 1200 -1500 MM long made out from high strength extruded aluminium with powder coating with 4 nos 6/16 Amp switch socket and provision forfour Nos gas outlet point work should be executed as per directions of engineer in charge and of CE certified makes.
42
15818
664356
SITC of Bed Head Panel of 1800 -2400 MM long made out from high strength extruded aluminium with powder coating with 6 nos 6/16 Amp switch socket and provision forfour Nos gas outlet point work should be executed as per directions of engineer in charge and of CE certified makes.
23
29636
681628
P&F of Bed Panel accessories like
Monitor Tray, Utility Basket, Vacuum Slider, Infusion Pump Pole with IV hooks, with proper nut bolts and screw and with proper finishing & work should be executed as per directions of engineer in charge of CE certified/ CE Approved .
-
-
-
Monitor Tray
65
3499
227435
Utility Basket
65
1708
111020
Vacuum Slider
65
563
36595
Infusion Pump Pole
65
3019
196235
Sub: Modular Operation Theater 03 Nos
-
-
-
S/1/T/C of SS 304 sandwitch puf panel Walls and ceiling for of Operating Area as per tender technical specification enclosed
300
12980
3894000
S/1/T/C of paint as pertender technical specification enclosed
300
1200
360000
SITC of recess mounted cleanroom flat LED panel of 595 x 595 mm size as per specifications
24
9440
226560
S/1/T/C of Touch Surgeon control panel, mounted flush in the theatre wall, complete set with electrical Distribution Board, as per enclosed tender technical specifications (Imported).
3
525100
1575300
S/1/T/C of Twin Plate X-ray viewing Screen designed to
provide a high level of control luminance without flicker. Size:- 1000x700x95 Deep, indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
23600
70800
S/1/T/C of Seamless flooring with perfectly curved fish-
covings resistance to mechanical stress and dynamic load and having Electro static discharge (ESD) I (anticonductive) protection characteristics 2 mm thick, washable- complete. As per enclosed tender technical specifications. (Imported)
105
3119
327495
S/1/T/C of Pass Box, Hatch should be provided in each Operation Theatre to remove waste materials from the operation theatre to the dirty linen area just adjacent to operation theatre- as per technical specification (Indian)
3
82600
247800
S/1/T/C of Scrub Sink- 3 bay- made in Stainless steel
304 Finish, having Sensor & Foot Operated with Thermostatic Mixing valve control to Size maintain the water temperature, Indigenous complete set, as per enclosed tender technical specifications.(lndian
3
118000
354000
S/1/T/C of Automatic Sliding door, Complete with Automation Unit, frame, viewing window. complete set, as per enclosed tender technical specifications. (extruded aluminium) (Indian)
-
-
-
Each 2100mm x 1500 mm (height x width of door frame)Automatic
3
241900
725700
Each 2100mm x 1000 mm (height x width of door frame)Automatic
3
230100
690300
S/1/T/C of LED OT light European CE Certified/UL listed/US FDA as per technical specifications.(imported)
3
1220975
3662925
S/1/T/C of camera for OT light as per technical specifications.(imported)
3
356568
1069704
S/1/T/C of Flat panel monitor as per technical specifications.(imported)
3
284534
853602
S/1/T/C of Single Arm Pendant with 1000mm long horizontal arm with both horizontal and vertical movemen , imported, as per CE Certified / UL Listed, complete set, as per enclosed tender technical specifications. (Imported)
3
634100
1902300
S/1/T/C of Double Arm pendant with 1000mm+800mm
long horizontal arms with both horizontal and vertical movement , imported, as per CE Certified/ UL listed, complete set as per enclosed tender technical specifications. (Imported)
3
702100
2106300
S/1/T/C of writing board, indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
14160
42480
S/1/T/C of PRD , indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
23010
69030
S/1/T/C of Storage Unit , indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
53100
159300
SITC of : Isolation Panel system with insulation monitoring and insulation fault location floor mounted dust and vermin proof (IP30) compartmentlaized cubical type 10 KVA medical isolation panels shall comfirm to following IEC statndard IEC 60364-7-710, IEC 61439-1 and -2, IEC 61557-8, IEC 61558-2-15 (IEC test certificate to be attached with panel) .The panel shall be fabricated out of 14 gauge CRCA sheet steel required hardware duly treated throgh 7 tank process for derusting. The panel door shall have trnsparant inspection window. The panel shall have following 1 no 10 KVA isolation transformer, 1 no Insulation monitor suitable for all outgoings, 1 no 63 Amp 10 KA 4 pole MCB, 12 nos 16/20 Amp 2 pole C curve MCB, all required suitable rating current transformer for incomer & outgoing, 1 no digital voltmeter & ammeter, suiatble for monitoring insulation fault, transfomer fault, insulation fault location. The panel shall be capable to perform insulation test. The Insulation monitor & fault locator should have inbuilt RS485 communication protocol. Panel shall be capble of detecting overheating of cables inside the OT isolation panel and sending alarm as well as alart over BMS. including making necessary connection etc complete in all respect
3
625000
1875000
SITC of 10 KVA 3 Phase Input, 3 Phase Output advance DSP controlled UPS with IGBT based rectifier, LCD display, double conversion / Digital Signal Processing UPS, with full load 30 minute battery back up, with required cabling for incoming & outgoing connection of as per enclosed technical specifications
3
400000
1200000
PART B TONK HOSPITAL
-
-
-
MEDICAL GAS PIPING SYSTEM
-
-
-
MEDICAL OXYGEN SYSTEM
-
-
-
SITC of Oxygen Manifold System (16+16) with tail pipes NRV -manifold system comprise of bank of 16+16 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 32 no's non return valves & 32 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag make CE Approved/CE certified Note : Providing of Cylinders is in the scope of Hospital / End Client.
2
192000
384000
S/1/T/C of Fully Automatic Oxygen Control Panel, as per HTM-2022/02-01 of UK NFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed)
2
425000
850000
SITC of Oxygen emergency system - Emergency manifold system comprise of bank of 6+6 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 12 no's non return valves & 12 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag. One High pressure Imported and approved make Double gauge regulator with manual pressure setting option and showing cylinder and line pressure make CE Approved/CE certified
Note : Providing of Cylinders is in the scope of Hospital / End Client.
2
72000
144000
S/1/T/C of Oxygen Outlets (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
350
4900
1715000
S/1/T/C of Oxygen probes (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
350
1472
515200
SITC of BPC (back pressure compensated) flow meter with humidifer made of nickel plated body , double jacketed with flow gradations marked on it . Desired flow will be setteled through rotary knob . Flow range should be between 0 to 15 1pm & work should be executed as per direction of engineer in charge .
350
1506
527100
MEDICAL NITROUS OXIDE SYSTEM
-
-
-
SITC of Nitrous Oxide Manifold System (4+4) with tail pipes NRV - manifold system comprise of bank of 4+4 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 8 no's non return valves & 8 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag make CE Approved/CE certified Note : Providing of Cylinders is in the scope of Hospital / End Client
1
26345
26345
S/1/T/C of Fully Automatic N20 Control Panel, as per HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
1
395000
395000
SITC of Nitrous Oxide emergency system - Emergency manifold system comprise of bank of 1+1 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 2 no's non return valves & 2 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag. One High pressure Imported and approved make Double gauge regulator with manual pressure setting option and showing cylinder and line pressure make CE Approved/CE certified
Note : Providing of Cylinders is in the scope of Hospital / End Client.
1
6586
6586
S/1/T/C of N20 Outlets (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) European CE with 4 digit notafied body no / UL Listed
8
4900
39200
S/1/T/C of N20 probes (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) European CE with 4 digit notafied body no / UL Listed
8
1472
11776
MEDICAL COMPRESSED AIR SYSTEM
-
-
-
S/1/T/C of Air Compressor with Compressed air plant complete pacakage unit total capacity 4500 LPM (imported) - as per HTM 2022/02-01/ NFPA99C as per enclosed technical specifications (European CE with 4 digit notafied body no / UL Listed
1
5835100
5835100
S/1/T/C of Air-4 Bar Outlets as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
78
4900
382200
S/1/T/C of Air-4 Bar probes, as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
78
1472
114816
SIIITIC of Air-7 Bar Outlets , as per HTM-2022102-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
7
4900
34300
SIIITIC of Air-7 Bar probes, as per HTM-2022102-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
7
1472
10304
MEDICAL VACCUM CENTRAL SYSTEM
-
-
-
S/I/IT/C of Vacuum central system with pump only complete pacakage unit total capacity 7500 LPM (imported) - as per HTM 2022/02-01/ NFPA99C as per enclosed technical specifications and list of approved makes (European CE with 4 digit notafied body no / UL Listed
1
3475100
3475100
SIIITIC of Vacuum Outlets , as per (imported)
HTM-2022102-01ofUKINFPA99C of USA as per enclosed technical specifications - uropean CE with 4 digit notafied body no / UL Listed
300
4900
1470000
SIIITIC of Vacuum probes, as per (imported)
HTM-2022102-01ofUKINFPA99C of USA as per enclosed technical specifications - European CE with 4 digit notafied body no / UL Listed
300
1472
441600
SITC of suction unit (Suction Controller and Collection Jar) with posibility to configure required capacity capacity collection Jar and should meets the requirements as per BSEN ISO 100793:2009. The unit must designed to operate with the vaccum line of MGPS. The collection Jar must accumpained with Vaccum regulator suitable for 0-14.7 psig with flow rate 0-55 Lmp (min) for operating temperature - 18°C to 50°C with ON/OFF facility. The collection Jar should be transparent, made of high quality polycarbonate that can be autoclaved at 121°C for 20 minutes for reuse and provided with auto stop to avoid over spill and contamination of the suction source when the jar collection reached optimized level. The complete unit supplied with filter to protect the source and pipe line from bacterial contamination.
-
-
-
600 m1 Capacity collection Jar
300
2438
731400
Supply, Installation, testing & commissioning of Theatre
Vacuum Unit (2 jar nos capacity 2000 Ml) ( Imported) European CE with 4 digit notafied body no
4
41300
165200
SITC of MGPS of medically grade as per BSEN-13348 with third party certification from Lloyds/TUV, degreased (ie free from oil, grease and particulate matters) seamless copper pipe confirming to ASTM B88 and all copper joining done by brazing with AWSA5.8, classification BCuP-5 or BS 1845 following procedure in accordance with ASTM B828 after purging with nitrogen. All pipe cutting shall be carried out with a radial pipe cutter and copper pipe fitting's shall comply with B4 alloy designation. Adequate support shall be provided while laying pipeline testing shall be done at 17 bar and after testing pipe shall be painted with two coat of enamel paint as per colour codification as per ISO 7396-Part-I 2016.
4570
1987
9080590
SITC of Valve box made of CRCA sheet duly powder coated with transparent window which is installed in the MGPS for oxygen and vaccum line and should comply with ENIS05211:2001 complete with ball type valves and gauses as required for oxygen compressed air and vaccum line (three gas)
-
-
-
For Three gas
17
11778
200226
For Four gas
2
14380
28760
For Five gas
4
17119
68476
SITC of microprocessor based auto alarm system (digital type) suitable for medical gas service provided with audible and visual alarm for MGPS Zoning. It should monitors the current status of oxygen /compressed air pressure in distribution pipeline of central medical supply system and trigger the alarm to alert. The system should comply BSEN ISO:7396-1:2007
-
-
-
For Two Gas Services
10
11709
117090
For Three Gas Services
7
15612
109284
For Four Gas Services
2
19516
39032
For Five Gas Services
4
22255
89020
For Six Gas Services
-
-
-
SITC of non lubricated ball type GM Isolation Valve with adapter & PTFE Seat having quarter turn handle opening of following sizes suitable for flow capacity 1500 LPM at 4.7 bar with maximum allowable pressure of 30 bar and suitable for working temperature ranging - 20°C to 130°C.Valve should be CE approved/ CE certified.
-
-
-
For 12 MM OD pipe
350
848
296800
For 15 MM OD pipe
14
1103
15442
For 22 MM OD pipe
12
1357
16284
For 28 MM OD pipe
6
1867
11202
For 42 MM OD pipe
4
3139
12556
For 54 MM OD pipe
2
4751
9502
SITC of Bed Head Panel of 1200 -1500 MM long made out from high strength extruded aluminium with powder coating with 4 nos 6/16 Amp switch socket and provision forfour Nos gas outlet point work should be executed as per directions of engineer in charge and of CE certified makes.
42
15818
664356
SITC of Bed Head Panel of 1800 -2400 MM long made out from high strength extruded aluminium with powder coating with 6 nos 6/16 Amp switch socket and provision forfour Nos gas outlet point work should be executed as per directions of engineer in charge and of CE certified makes.
23
29636
681628
P&F of Bed Panel accessories like
Monitor Tray, Utility Basket, Vacuum Slider, Infusion Pump Pole with IV hooks, with proper nut bolts and screw and with proper finishing & work should be executed as per directions of engineer in charge of CE certified/ CE Approved .
-
-
-
Monitor Tray
65
3499
227435
Utility Basket
65
1708
111020
Vacuum Slider
65
563
36595
Infusion Pump Pole
65
3019
196235
Sub: Modular Operation Theater 03 Nos
-
-
-
S/1/T/C of SS 304 sandwitch puf panel Walls and ceiling for of Operating Area as per tender technical specification enclosed
270
12980
3504600
S/1/T/C of paint as pertender technical specification enclosed
270
1200
324000
SITC of recess mounted cleanroom flat LED panel of 595 x 595 mm size as per specifications
24
9440
226560
S/1/T/C of Touch Surgeon control panel, mounted flush in the theatre wall, complete set with electrical Distribution Board, as per enclosed tender technical specifications (Imported).
3
525100
1575300
S/1/T/C of Twin Plate X-ray viewing Screen designed to
provide a high level of control luminance without flicker. Size:- 1000x700x95 Deep, indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
23600
70800
S/1/T/C of Seamless flooring with perfectly curved fish-
covings resistance to mechanical stress and dynamic load and having Electro static discharge (ESD) I (anticonductive) protection characteristics 2 mm thick, washable- complete. As per enclosed tender technical specifications. (Imported)
105
3119
327495
S/1/T/C of Pass Box, Hatch should be provided in each Operation Theatre to remove waste materials from the operation theatre to the dirty linen area just adjacent to operation theatre- as per technical specification (Indian)
3
82600
247800
S/1/T/C of Scrub Sink- 3 bay- made in Stainless steel
304 Finish, having Sensor & Foot Operated with Thermostatic Mixing valve control to Size maintain the water temperature, Indigenous complete set, as per enclosed tender technical specifications.(lndian
3
118000
354000
S/1/T/C of Automatic Sliding door, Complete with Automation Unit, frame, viewing window. complete set, as per enclosed tender technical specifications. (extruded aluminium) (Indian)
-
-
-
Each 2100mm x 1500 mm (height x width of door frame)Automatic
3
241900
725700
Each 2100mm x 1000 mm (height x width of door frame)Automatic
3
230100
690300
S/1/T/C of LED OT light European CE Certified/UL listed/USFDA as per technical specifications.(imported)
3
1220975
3662925
S/1/T/C of camera for OT light as per technical specifications.(imported)
3
356568
1069704
S/1/T/C of Flat panel monitor as per technical specifications.(imported)
3
284534
853602
S/1/T/C of Single Arm Pendant with 1000mm long horizontal arm with both horizontal and vertical movemen , imported, as per CE Certified / UL Listed, complete set, as per enclosed tender technical specifications. (Imported)
3
634100
1902300
S/1/T/C of Double Arm pendant with 1000mm+800mm
long horizontal arms with both horizontal and vertical movement , imported, as per CE Certified/ UL listed, complete set as per enclosed tender technical specifications. (Imported)
3
702100
2106300
S/1/T/C of writing board, indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
14160
42480
S/1/T/C of PRD , indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
23010
69030
S/1/T/C of Storage Unit , indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
53100
159300
SITC of : Isolation Panel system with insulation monitoring and insulation fault location floor mounted dust and vermin proof (IP30) compartmentlaized cubical type 10 KVA medical isolation panels shall comfirm to following IEC statndard IEC 60364-7-710, IEC 61439-1 and -2, IEC 61557-8, IEC 61558-2-15 (IEC test certificate to be attached with panel) .The panel shall be fabricated out of 14 gauge CRCA sheet steel required hardware duly treated throgh 7 tank process for derusting. The panel door shall have trnsparant inspection window. The panel shall have following 1 no 10 KVA isolation transformer, 1 no Insulation monitor suitable for all outgoings, 1 no 63 Amp 10 KA 4 pole MCB, 12 nos 16/20 Amp 2 pole C curve MCB, all required suitable rating current transformer for incomer & outgoing, 1 no digital voltmeter & ammeter, suiatble for monitoring insulation fault, transfomer fault, insulation fault location. The panel shall be capable to perform insulation test. The Insulation monitor & fault locator should have inbuilt RS485 communication protocol. Panel shall be capble of detecting overheating of cables inside the OT isolation panel and sending alarm as well as alart over BMS. including making necessary connection
3
625000
1875000
SITC of 10 KVA 3 Phase Input, 3 Phase Output advance DSP controlled UPS with IGBT based rectifier, LCD display, double conversion / Digital Signal Processing UPS, with full load 30 minute battery back up, with required cabling for incoming & outgoing connection of as per enclosed technical specifications
3
400000
1200000
PART C NAGUR
-
-
-
MEDICAL GAS PIPING SYSTEM
-
-
-
MEDICAL OXYGEN SYSTEM
-
-
-
SITC of Oxygen Manifold System (16+16) with tail pipes NRV -manifold system comprise of bank of 16+16 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 32 no's non return valves & 32 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag make CE Approved/CE certified Note : Providing of Cylinders is in the scope of Hospital / End Client.
2
192000
384000
S/1/T/C of Fully Automatic Oxygen Control Panel, as per HTM-2022/02-01 of UK NFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed)
2
425000
850000
SITC of Oxygen emergency system - Emergency manifold system comprise of bank of 6+6 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 12 no's non return valves & 12 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag. One High pressure Imported and approved make Double gauge regulator with manual pressure setting option and showing cylinder and line pressure make CE Approved/CE certified
Note : Providing of Cylinders is in the scope of Hospital / End Client.
2
72000
144000
S/1/T/C of Oxygen Outlets (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
350
4900
1715000
S/1/T/C of Oxygen probes (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
350
1472
515200
SITC of BPC (back pressure compensated) flow meter with humidifer made of nickel plated body , double jacketed with flow gradations marked on it . Desired flow will be setteled through rotary knob . Flow range should be between 0 to 15 1pm & work should be executed as per direction of engineer in charge .
350
1506
527100
MEDICAL NITROUS OXIDE SYSTEM
-
-
-
SITC of Nitrous Oxide Manifold System (4+4) with tail pipes NRV - manifold system comprise of bank of 4+4 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 8 no's non return valves & 8 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag make CE Approved/CE certified Note : Providing of Cylinders is in the scope of Hospital / End Client
1
26345
26345
S/1/T/C of Fully Automatic N20 Control Panel, as per HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
1
395000
395000
SITC of Nitrous Oxide emergency system - Emergency manifold system comprise of bank of 1+1 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 2 no's non return valves & 2 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag. One High pressure Imported and approved make Double gauge regulator with manual pressure setting option and showing cylinder and line pressure make CE Approved/CE certified
Note : Providing of Cylinders is in the scope of Hospital / End Client.
1
6586
6586
S/1/T/C of N20 Outlets (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) European CE with 4 digit notafied body no / UL Listed
8
4900
39200
S/1/T/C of N20 probes (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) European CE with 4 digit notafied body no / UL Listed
8
1472
11776
MEDICAL COMPRESSED AIR SYSTEM
-
-
-
S/1/T/C of Air Compressor with Compressed air plant complete pacakage unit total capacity 4500 LPM (imported) - as per HTM 2022/02-01/ NFPA99C as per enclosed technical specifications (European CE with 4 digit notafied body no / UL Listed
1
5835100
5835100
S/1/T/C of Air-4 Bar Outlets as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
78
4900
382200
S/1/T/C of Air-4 Bar probes, as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
78
1472
114816
SIIITIC of Air-7 Bar Outlets , as per HTM-2022102-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
7
4900
34300
SIIITIC of Air-7 Bar probes, as per HTM-2022102-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
7
1472
10304
MEDICAL VACCUM CENTRAL SYSTEM
-
-
-
S/I/IT/C of Vacuum central system with pump only complete pacakage unit total capacity 7500 LPM (imported) - as per HTM 2022/02-01/ NFPA99C as per enclosed technical specifications and list of approved makes (European CE with 4 digit notafied body no / UL Listed
1
3475100
3475100
SIIITIC of Vacuum Outlets , as per (imported)
HTM-2022102-01ofUKINFPA99C of USA as per enclosed technical specifications - uropean CE with 4 digit notafied body no / UL Listed
300
4900
1470000
SIIITIC of Vacuum probes, as per (imported)
HTM-2022102-01ofUKINFPA99C of USA as per enclosed technical specifications - European CE with 4 digit notafied body no / UL Listed
300
1472
441600
SITC of suction unit (Suction Controller and Collection Jar) with posibility to configure required capacity capacity collection Jar and should meets the requirements as per BSEN ISO 100793:2009. The unit must designed to operate with the vaccum line of MGPS. The collection Jar must accumpained with Vaccum regulator suitable for 0-14.7 psig with flow rate 0-55 Lmp (min) for operating temperature - 18°C to 50°C with ON/OFF facility. The collection Jar should be transparent, made of high quality polycarbonate that can be autoclaved at 121°C for 20 minutes for reuse and provided with auto stop to avoid over spill and contamination of the suction source when the jar collection reached optimized level. The complete unit supplied with filter to protect the source and pipe line from bacterial contamination.
-
-
-
600 m1 Capacity collection Jar
300
2438
731400
Supply, Installation, testing & commissioning of Theatre
Vacuum Unit (2 jar nos capacity 2000 Ml) ( Imported) European CE with 4 digit notafied body no
4
41300
165200
SITC of MGPS of medically grade as per BSEN-13348 with third party certification from Lloyds/TUV, degreased (ie free from oil, grease and particulate matters) seamless copper pipe confirming to ASTM B88 and all copper joining done by brazing with AWSA5.8, classification BCuP-5 or BS 1845 following procedure in accordance with ASTM B828 after purging with nitrogen. All pipe cutting shall be carried out with a radial pipe cutter and copper pipe fitting's shall comply with B4 alloy designation. Adequate support shall be provided while laying pipeline testing shall be done at 17 bar and after testing pipe shall be painted with two coat of enamel paint as per colour codification as per ISO 7396-Part-I 2016.
4540
1987
9020980
SITC of Valve box made of CRCA sheet duly powder coated with transparent window which is installed in the MGPS for oxygen and vaccum line and should comply with ENIS05211:2001 complete with ball type valves and gauses as required for oxygen compressed air and vaccum line (three gas)
-
-
-
For Three gas
17
11778
200226
For Four gas
2
14380
28760
For Five gas
4
17119
68476
SITC of microprocessor based auto alarm system (digital type) suitable for medical gas service provided with audible and visual alarm for MGPS Zoning. It should monitors the current status of oxygen /compressed air pressure in distribution pipeline of central medical supply system and trigger the alarm to alert. The system should comply BSEN ISO:7396-1:2007
-
-
-
For Two Gas Services
10
11709
117090
For Three Gas Services
7
15612
109284
For Four Gas Services
2
19516
39032
For Five Gas Services
4
22255
89020
For Six Gas Services
-
-
-
SITC of non lubricated ball type GM Isolation Valve with adapter & PTFE Seat having quarter turn handle opening of following sizes suitable for flow capacity 1500 LPM at 4.7 bar with maximum allowable pressure of 30 bar and suitable for working temperature ranging - 20°C to 130°C.Valve should be CE approved/ CE certified.
-
-
-
For 12 MM OD pipe
350
848
296800
For 15 MM OD pipe
14
1103
15442
For 22 MM OD pipe
12
1357
16284
For 28 MM OD pipe
6
1867
11202
For 42 MM OD pipe
4
3139
12556
For 54 MM OD pipe
2
4751
9502
SITC of Bed Head Panel of 1200 -1500 MM long made out from high strength extruded aluminium with powder coating with 4 nos 6/16 Amp switch socket and provision forfour Nos gas outlet point work should be executed as per directions of engineer in charge and of CE certified makes.
42
15818
664356
SITC of Bed Head Panel of 1800 -2400 MM long made out from high strength extruded aluminium with powder coating with 6 nos 6/16 Amp switch socket and provision forfour Nos gas outlet point work should be executed as per directions of engineer in charge and of CE certified makes.
23
29636
681628
P&F of Bed Panel accessories like
Monitor Tray, Utility Basket, Vacuum Slider, Infusion Pump Pole with IV hooks, with proper nut bolts and screw and with proper finishing & work should be executed as per directions of engineer in charge of CE certified/ CE Approved .
-
-
-
Monitor Tray
65
3499
227435
Utility Basket
65
1708
111020
Vacuum Slider
65
563
36595
Infusion Pump Pole
65
3019
196235
Sub: Modular Operation Theater 03 Nos
-
-
-
S/1/T/C of SS 304 sandwitch puf panel Walls and ceiling for of Operating Area as per tender technical specification enclosed
270
12980
3504600
S/1/T/C of paint as pertender technical specification enclosed
270
1200
324000
SITC of recess mounted cleanroom flat LED panel of 595 x 595 mm size as per specifications
24
9440
226560
S/1/T/C of Touch Surgeon control panel, mounted flush in the theatre wall, complete set with electrical Distribution Board, as per enclosed tender technical specifications (Imported).
3
525100
1575300
S/1/T/C of Twin Plate X-ray viewing Screen designed to
provide a high level of control luminance without flicker. Size:- 1000x700x95 Deep, indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
23600
70800
S/1/T/C of Seamless flooring with perfectly curved fish-
covings resistance to mechanical stress and dynamic load and having Electro static discharge (ESD) I (anticonductive) protection characteristics 2mm thick, washable- complete. As per enclosed tender technical specifications. (Imported)
105
3119
327495
S/1/T/C of Pass Box, Hatch should be provided in each Operation Theatre to remove waste materials from the operation theatre to the dirty linen area just adjacent to operation theatre- as per technical specification (Indian)
3
82600
247800
S/1/T/C of Scrub Sink- 3 bay- made in Stainless steel
304 Finish, having Sensor & Foot Operated with Thermostatic Mixing valve control to Size maintain the water temperature, Indigenous complete set, as per enclosed tender technical specifications.(lndian
3
118000
354000
S/1/T/C of Automatic Sliding door, Complete with Automation Unit, frame, viewing window. complete set, as per enclosed tender technical specifications. (extruded aluminium) (Indian)
-
-
-
Each 2100mm x 1500 mm (height x width of door frame)Automatic
3
241900
725700
Each 2100mm x 1000 mm (height x width of door frame)Automatic
3
230100
690300
S/1/T/C of LED OT light European CE Certified/UL listed/US FDA as per technical specifications.(imported)
3
1220975
3662925
S/1/T/C of camera for OT light as per technical specifications.(imported)
3
356568
1069704
S/1/T/C of Flat panel monitor as per technical specifications.(imported)
3
284534
853602
S/1/T/C of Single Arm Pendant with 1000mm long horizontal arm with both horizontal and vertical movemen , imported, as per CE Certified / UL Listed, complete set, as per enclosed tender technical specifications. (Imported)
3
634100
1902300
S/1/T/C of Double Arm pendant with 1000mm+800mm
long horizontal arms with both horizontal and vertical movement , imported, as per CE Certified/ UL listed, complete set as per enclosed tender technical specifications. (Imported)
3
702100
2106300
S/1/T/C of writing board, indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
14160
42480
S/1/T/C of PRD , indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
23010
69030
S/1/T/C of Storage Unit , indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
53100
159300
SITC of : Isolation Panel system with insulation monitoring and insulation fault location floor mounted dust and vermin proof (IP30) compartmentlaized cubical type 10 KVA medical isolation panels shall comfirm to following IEC statndard IEC 60364-7-710, IEC 61439-1 and -2, IEC 61557-8, IEC 61558-2-15 (IEC test certificate to be attached with panel) .The panel shall be fabricated out of 14 gauge CRCA sheet steel required hardware duly treated throgh 7 tank process for derusting. The panel door shall have trnsparant inspection window. The panel shall have following 1 no 10 KVA isolation transformer, 1 no Insulation monitor suitable for all outgoings, 1 no 63 Amp 10 KA 4 pole MCB, 12 nos 16/20 Amp 2 pole C curve MCB, all required suitable rating current transformer for incomer & outgoing, 1 no digital voltmeter & ammeter, suiatble for monitoring insulation fault, transfomer fault, insulation fault location. The panel shall be capable to perform insulation test. The Insulation monitor & fault locator should have inbuilt RS485 communication protocol. Panel shall be capble of detecting overheating of cables inside the OT isolation panel and sending alarm as well as alart over BMS. including making necessary connection etc complete in all respect
3
625000
1875000
SITC of 10 KVA 3 Phase Input, 3 Phase Output advance DSP controlled UPS with IGBT based rectifier, LCD display, double conversion / Digital Signal Processing UPS, with full load 30 minute battery back up, with required cabling for incoming & outgoing connection of as per enclosed technical specifications
3
400000
1200000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%