Rajasthan State Road Development And Construction Corporation Limited Tender

Silt clearance of drains, channels and canals with lift 1.5 Meter. And lead up to 50 Meter.

Restoration of rain cuts with soil, Morrum, gravel or a mixture of these including all leads and lifts and cost of arrangement of land, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammer to restore the original alignment levels & slopes complete as per MoRTH specification Clause 3002.

Providing & laying patchng with mixed SDBC material including cleaning area of patch removing all loose and disintigrated material and applying tack coat @ 2.25 kg/10 sqm with all lead, placing and compacting of material with 8-10 tonne power road roller including cost of bitumen grade 60/70, aggregate, fuel, lubricant, binder, hire charges of machjinary T & P etc. complete.25-30mm thick patch (with binder content 5%)

Labour charges for removal of up heaved bitumen surface on semi-dense carpeted road surface good to original condition

Up to 3 cm height

Repair of iron sign board at road side including cutting welding and refixing as per directions but excluding painting and lettering.

Providing and laying of hot applied thermo plastic compound inclusive of type-1 reflectorising glass beads as per table 800.3, 800.4 applied in uniform thickness of at least 2.5 mm and spread uniformlywith reflectorising glass beads type-2 in addition @ 250 gm/scm with a road marking machine as per IRC : 35 complete with traffic diversion arrangement as per MoRTH specification clause 803.4.

White washing of parapets, kerbs, railings, boundary stones, guard etc. complete:

Old surface-two coats.

Painting and printing letter on km stone with first quality synthetic enamel paint as per MoRTH specification clause 800

5th Km. stone

Km. Stone for ODR & MDR

Repair of pot holes by Wet Mix Macadam material by removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, compacting base of excavation as per clause 503, back filling the pot holes with wet mix macadam material by manual means as per clause 406, compacting with roller 8-10T, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.

Providing and laying built-up spray grout patching 75 mm thick in two layers (each layer consisting of spreading aggregate (crusher broken) @ 0.50 cum per 10 sqm area as per MoRTH specification) laying first layer after application of tack coat @ 3.75 kg per 10 sqm (including cost of tack coat) rolling with 8-10 tonne power road roller and application of first spray of binder @ 15 kg/10 sqm. Spreading and rolling of second layer of coarse aggregate with 8-10 tonne power road roller applicationof second spray of binder @ 15 kg per 10 sqm and laying key aggregate on the top of second layer and rolling with 8-10 tonne power road roller including heating and spraying of binder, cleaning the area of patch, pot holes cut to regular shape, with vertical side, removing all loose and disintegrated material including cost of coarse aggregate, key aggregate, rolling and hire charges of machinery, T & P, fuel bitumen etc. complete.

Construction of Speed Breaker of IRC standard having width of 3.70 M including cost of stone aggregate (50-25mm) size hire charges for roller for consolidation and compaction and other machines required for the work including cost of Bitumen