Rajasthan State Road Development And Construction Corporation Limited Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Technical
Technical
Bid Capacity
... View More
The bid capacity required can be calculated using the formula: Assessed Available Bid capacity = (A * N * 2 - B), where A is the maximum value of construction works executed in anyone year during the last five years, N is the number of years prescribed for completion of the works, and B is the value of existing commitments and on-going works to be completed during the next N years.
Technical Capacity
... View More
The required prior work experience for the bidder is experience in works of a similar nature and required size for any of the last five years. The bidder should provide details of works underway or contractually committed. The bidder should have completed works as a prime contractor, and work performed in the past as a nominated sub-contractor will also be considered, provided the sub-contract involved execution of all main items of work described in the bid document. The value of work performed in the last five years is required, excluding the current year, with specific years mentioned: 2023-2024, 2022-2023, 2021-2022, 2020-2021, and 2019-2020. No specific amount or percentage is mentioned for similar works completed, except for the subcontracting component which should be more than 10 per cent of the Bid Price. The bidder is required to have a good financial standing and should not have abandoned any work in the past. Key Personnel should have 10 years of experience, specifically two Graduate Civil Engineers and four supervisors. The bidder should demonstrate availability of a Project Manager with minimum three years' experience in construction of similar civil engineering works. The bidder's experience is assessed based on the maximum value of construction works executed in anyone year during the last five years. The bidder's available bid capacity is calculated as (A * N * 2 - B), where A is the maximum value of construction works executed, N is the number of years prescribed for completion of the works, and B is the value of existing commitments and on-going works. The bidder should upload scanned copies of certificates showing details of similar nature of works executed and provide an Annual Turnover Certificate from a Chartered Accountant for the last five financial years, with a breakup of construction works and total works for each financial year.
Costs
EMD
₹ 10,25,840Document Cost
₹ 5,900Tender Fee
₹ 2,500
Summary
Sitc Of Mgps And Mot Work For Medical Hospital (phase-ii) At Bundi, Rajasthan
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_RSRDC_445105_1Tender No
RSRDCC NIT 468/2024-25 DATED 28.01.2025 Sl No 2Tender Authority
Rajasthan State Road Development And Construction Corporation Limited ViewPurchaser Address
-Website
http://http://roads.rajasthan.gov.in/content/raj/roads/en/home.html
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
VARIOUS ACT CIRCULARS NOTIFICATION AND ORDERS
PD BANK ACCOUNT NUMBER DETAILS
RS. 1000/- STAMP FEE FOR AFFIDAVIT
ANNEXURE A,B,C,D AND RTPP ACT 2012, ANNEXURE C
BOQ Items
... More
SITC of Oxygen emergency system - Emergency manifold system comprise of bank of 6+6 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 12 no's non return valves & 12 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag. One High pressure Imported and approved make Double gauge regulator with manual pressure setting option and showing cylinder and line pressure make CE Approved/CE certified
Note : Providing of Cylinders is in the scope of Hospital / End Client.
2
72000
144000
... More
S/1/T/C of Oxygen Outlets (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
370
4900
1813000
... More
S/1/T/C of Oxygen probes (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
370
1472
544640
... More
SITC of BPC (back pressure compensated) flow meter with humidifer made of nickel plated body , double jacketed with flow gradations marked on it . Desired flow will be setteled through rotary knob . Flow range should be between 0 to 15 1pm & work should be executed as per direction of engineer in charge .
314
1506
472884
... More
MEDICAL NITROUS OXIDE SYSTEM
-
-
-
... More
SITC of Nitrous Oxide Manifold System (4+4) with tail pipes NRV - manifold system comprise of bank of 4+4 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 8 no's non return valves & 8 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag make CE Approved/CE certified Note : Providing of Cylinders is in the scope of Hospital / End Client
1
26345
26345
... More
S/1/T/C of Fully Automatic N20 Control Panel, as per HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
1
395000
395000
... More
SITC of Nitrous Oxide emergency system - Emergency manifold system comprise of bank of 1+1 cylinders (Bulk cylinder of D type) capacity manifold high pressure copper pipe of size 1/2"ID x14 swg (approx. 2.0320 mm) & high pressure fitting made of high tensile strength brass be used to connect the cylinders to the header assemblies with 2 no's non return valves & 2 no's high pressure flexible tail pipe is made of copper pipe of 1/3"x16 swg (approx. 1.6256 mm) the manifold is hydraulically tested at 225kg/cm2 pressure it is also degreased and is to be offered duly wrapped in a polythene bag. One High pressure Imported and approved make Double gauge regulator with manual pressure setting option and showing cylinder and line pressure make CE Approved/CE certified
Note : Providing of Cylinders is in the scope of Hospital / End Client.
1
6586
6586
... More
S/1/T/C of N20 Outlets (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) European CE with 4 digit notafied body no / UL Listed
8
4900
39200
... More
S/1/T/C of N20 probes (imported) as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) European CE with 4 digit notafied body no / UL Listed
8
1472
11776
... More
MEDICAL COMPRESSED AIR SYSTEM
-
-
-
... More
S/1/T/C of Air Compressor with Compressed air plant complete pacakage unit total capacity 6000 LPM (imported) - as per HTM 2022/02-01/ NFPA99C as per enclosed technical specifications (European CE with 4 digit notafied body no / UL Listed
1
6418610
6418610
... More
S/1/T/C of Air-4 Bar Outlets as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
78
4900
382200
... More
S/1/T/C of Air-4 Bar probes, as per
HTM-2022/02-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
78
1472
114816
... More
SIIITIC of Air-7 Bar Outlets , as per HTM-2022102-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
7
4900
34300
... More
SIIITIC of Air-7 Bar probes, as per HTM-2022102-01 of UKINFPA99C of USA as per enclosed technical specifications - (Imported) (European CE with 4 digit notafied body no / UL Listed
7
1472
10304
... More
MEDICAL VACCUM CENTRAL SYSTEM
-
-
-
... More
S/I/IT/C of Vacuum central system with pump only complete pacakage unit total capacity 9000 LPM (imported) - as per HTM 2022/02-01/ NFPA99C as per enclosed technical specifications and list of approved makes (European CE with 4 digit notafied body no / UL Listed
1
4950000
4950000
... More
SIIITIC of Vacuum Outlets , as per (imported)
HTM-2022102-01ofUKINFPA99C of USA as per enclosed technical specifications - uropean CE with 4 digit notafied body no / UL Listed
370
4900
1813000
... More
SIIITIC of Vacuum probes, as per (imported)
HTM-2022102-01ofUKINFPA99C of USA as per enclosed technical specifications - European CE with 4 digit notafied body no / UL Listed
370
1472
544640
... More
SITC of suction unit (Suction Controller and Collection Jar) with posibility to configure required capacity capacity collection Jar and should meets the requirements as per BSEN ISO 100793:2009. The unit must designed to operate with the vaccum line of MGPS. The collection Jar must accumpained with Vaccum regulator suitable for 0-14.7 psig with flow rate 0-55 Lmp (min) for operating temperature - 18°C to 50°C with ON/OFF facility. The collection Jar should be transparent, made of high quality polycarbonate that can be autoclaved at 121°C for 20 minutes for reuse and provided with auto stop to avoid over spill and contamination of the suction source when the jar collection reached optimized level. The complete unit supplied with filter to protect the source and pipe line from bacterial contamination.
-
-
-
... More
600 m1 Capacity collection Jar
314
2438
765532
... More
Supply, Installation, testing & commissioning of Theatre
Vacuum Unit (2 jar nos capacity 2000 Ml) ( Imported) European CE with 4 digit notafied body no
4
41300
165200
... More
SITC of MGPS of medically grade as per BSEN-13348 with third party certification from Lloyds/TUV, degreased (ie free from oil, grease and particulate matters) seamless copper pipe confirming to ASTM B88 and all copper joining done by brazing with AWSA5.8, classification BCuP-5 or BS 1845 following procedure in accordance with ASTM B828 after purging with nitrogen. All pipe cutting shall be carried out with a radial pipe cutter and copper pipe fitting's shall comply with B4 alloy designation. Adequate support shall be provided while laying pipeline testing shall be done at 17 bar and after testing pipe shall be painted with two coat of enamel paint as per colour codification as per ISO 7396-Part-I 2016.
4008.8
1987
7965485.6
... More
SITC of Valve box made of CRCA sheet duly powder coated with transparent window which is installed in the MGPS for oxygen and vaccum line and should comply with ENIS05211:2001 complete with ball type valves and gauses as required for oxygen compressed air and vaccum line (three gas)
-
-
-
... More
For Three gas
17
11778
200226
... More
For Four gas
2
14380
28760
... More
For Five gas
4
17119
68476
... More
SITC of microprocessor based auto alarm system (digital type) suitable for medical gas service provided with audible and visual alarm for MGPS Zoning. It should monitors the current status of oxygen /compressed air pressure in distribution pipeline of central medical supply system and trigger the alarm to alert. The system should comply BSEN ISO:7396-1:2007
-
-
-
... More
For Two Gas Services
10
11709
117090
... More
For Three Gas Services
7
15612
109284
... More
For Four Gas Services
2
19516
39032
... More
For Five Gas Services
-
-
-
... More
For Six Gas Services
-
-
-
... More
SITC of non lubricated ball type GM Isolation Valve with adapter & PTFE Seat having quarter turn handle opening of following sizes suitable for flow capacity 1500 LPM at 4.7 bar with maximum allowable pressure of 30 bar and suitable for working temperature ranging - 20°C to 130°C.Valve should be CE approved/ CE certified.
-
-
-
... More
For 12 MM OD pipe
370
848
313760
... More
For 15 MM OD pipe
14
1103
15442
... More
For 22 MM OD pipe
12
1357
16284
... More
For 28 MM OD pipe
6
1867
11202
... More
For 42 MM OD pipe
4
3139
12556
... More
For 54 MM OD pipe
2
4751
9502
... More
SITC of Bed Head Panel of 1200 -1500 MM long made out from high strength extruded aluminium with powder coating with 4 nos 6/16 Amp switch socket and provision forfour Nos gas outlet point work should be executed as per directions of engineer in charge and of CE certified makes.
42
15818
664356
... More
SITC of Bed Head Panel of 1800 -2400 MM long made out from high strength extruded aluminium with powder coating with 6 nos 6/16 Amp switch socket and provision forfour Nos gas outlet point work should be executed as per directions of engineer in charge and of CE certified makes.
23
29636
681628
... More
P&F of Bed Panel accessories like
Monitor Tray, Utility Basket, Vacuum Slider, Infusion Pump Pole with IV hooks, with proper nut bolts and screw and with proper finishing & work should be executed as per directions of engineer in charge of CE certified/ CE Approved .
-
-
-
... More
Monitor Tray
60
3499
209940
... More
Utility Basket
60
1708
102480
... More
Vacuum Slider
60
563
33780
... More
Infusion Pump Pole
60
3019
181140
... More
Sub: Modular Operation Theater 03 Nos
-
-
-
... More
S/1/T/C of SS 304 sandwitch puf panel Walls and ceiling for of Operating Area as per tender technical specification enclosed
250
12980
3245000
... More
S/1/T/C of paint as pertender technical specification enclosed
250
1200
300000
... More
SITC of recess mounted cleanroom flat LED panel of 595 x 595 mm size as per specifications
24
9440
226560
... More
S/1/T/C of Touch Surgeon control panel, mounted flush in the theatre wall, complete set with electrical Distribution Board, as per enclosed tender technical specifications (Imported).
3
525100
1575300
... More
S/1/T/C of Twin Plate X-ray viewing Screen designed to
provide a high level of control luminance without flicker. Size:- 1000x700x95 Deep, indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
23600
70800
... More
S/1/T/C of Seamless flooring with perfectly curved fish-
covings resistance to mechanical stress and dynamic load and having Electro static discharge (ESD) I (anticonductive) protection characteristics 2 mm thick, washable- complete. As per enclosed tender technical specifications. (Imported)
80
3119
249520
... More
S/1/T/C of Pass Box, Hatch should be provided in each Operation Theatre to remove waste materials from the operation theatre to the dirty linen area just adjacent to operation theatre- as per technical specification (Indian)
3
82600
247800
... More
S/1/T/C of Scrub Sink- 3 bay- made in Stainless steel
304 Finish, having Sensor & Foot Operated with Thermostatic Mixing valve control to Size maintain the water temperature, Indigenous complete set, as per enclosed tender technical specifications.(lndian
3
118000
354000
... More
S/1/T/C of Automatic Sliding door, Complete with Automation Unit, frame, viewing window. complete set, as per enclosed tender technical specifications. (extruded aluminium) (Indian)
-
-
-
... More
Each 2100mm x 1500 mm (height x width of door frame)Automatic
3
241900
725700
... More
Each 2100mm x 1000 mm (height x width of door frame)Automatic
3
230100
690300
... More
S/1/T/C of LED OT light European CE Certified/UL listed/US FDA as per technical specifications.(imported)
3
1220975
3662925
... More
S/1/T/C of camera for OT light as per technical specifications.(imported)
3
356568
1069704
... More
S/1/T/C of Flat panel monitor as per technical specifications.(imported)
3
284534
853602
... More
S/1/T/C of Single Arm Pendant with 1000mm long horizontal arm with both horizontal and vertical movemen , imported, as per CE Certified / UL Listed, complete set, as per enclosed tender technical specifications. (Imported)
3
634100
1902300
... More
S/1/T/C of Double Arm pendant with 1000mm+800mm
long horizontal arms with both horizontal and vertical movement , imported, as per CE Certified/ UL listed, complete set as per enclosed tender technical specifications. (Imported)
3
702100
2106300
... More
S/1/T/C of writing board, indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
14160
42480
... More
S/1/T/C of PRD , indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
23010
69030
... More
S/1/T/C of Storage Unit , indigenous, complete set as per enclosed tender technical specifications. (Indian)
3
53100
159300
... More
SITC of : Isolation Panel system with insulation monitoring and insulation fault location floor mounted dust and vermin proof (IP30) compartmentlaized cubical type 10 KVA medical isolation panels shall comfirm to following IEC statndard IEC 60364-7-710, IEC 61439-1 and -2, IEC 61557-8, IEC 61558-2-15 (IEC test certificate to be attached with panel) .The panel shall be fabricated out of 14 gauge CRCA sheet steel required hardware duly treated throgh 7 tank process for derusting. The panel door shall have trnsparant inspection window. The panel shall have following 1 no 10 KVA isolation transformer, 1 no Insulation monitor suitable for all outgoings, 1 no 63 Amp 10 KA 2 pole MCB, 12 nos 16/20 Amp 2 pole C curve MCB, all required suitable rating current transformer for incomer & outgoing, 1 no digital voltmeter & ammeter, suiatble for monitoring insulation fault, transfomer fault, insulation fault location. The panel shall be capable to perform insulation test. The Insulation monitor & fault locator should have inbuilt RS485 communication protocol. Panel shall be capble of detecting overheating of cables inside the OT isolation panel and sending alarm as well as alart over BMS. including making necessary connection etc complete in all respect
3
625000
1875000
... More
SITC of 10 KVA 1 Phase Input, 1 Phase Output advance DSP controlled UPS with IGBT based rectifier, LCD display, double conversion / Digital Signal Processing UPS, with full load 30 minute battery back up, with required cabling for incoming & outgoing connection of as per enclosed technical specifications
3
400000
1200000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%