Rajasthan State Industrial Development And Investment Corporation Tender

Providing and laying Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per table 510 and design mix for base/binder course including loading of material with F.E loader heating of binder aggregate and filler in approved hot mix plant as per clause 6.5 of manual transporting the mixed material by tippers and laying with sansor paver finisher as per clause 505.3.5 to the required level and grade rolling by self propelled power rollers and vibratory rollers or pneumatic tyred roller 150-250KN. TP=0.7MPa to achieve the desired density (approved by the department) but excluding cost of primer/tack coat. [MoRTH Specification : Clause 505,112], Grading II (19 mm nominal size) - Bitumen @ minimum 4.5 % of mix (VG-30 grade) & thickness 50 - 75 mm

Providing and applying tack coat on the prepared surface ,with bitumen emulsion as per IS : 8887 & manufacturer’s specifications @ 2 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI.503, 501.5.2,112 ( Including cleaning of Road Surface)

Providing and applying tack coat on the prepared surface ,with bitumen emulsion as per IS : 8887 & manufacturer’s specifications @ 2 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI.503, 501.5.2,112 ( Including cleaning of Road Surface), Add extra to item No. 6.2 for additional 0.1Kg per Sqm emulsion

Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-16 for wearing course including loading of aggregate with F.E loader and hot mixing of binder and 2% cement filler with aggregates in approved hot mix plant as per clause 6.5 of manual Transporting the mix material with tipper to paver and laying with sensor paver finisher (as per clouse 507.3.5) to the required level , grades and rolling with vibratory compactor and pneumatic tyred roller 150-250 KN,TP=0.7 Mpa, to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MORTH Specification : Clause -507,112), Grade-II Bitumen @ 5.4 % of mix With All lead of mix material, VG-30 grade

Providing and laying of hot applied thermoplastic compound inclusive type I reflectrosing glass beads as per table 800-9, 800-10 applied in uniform thickness of at least 2.5 mm and spread uniformly with reflectorising glass beads type II in addition @ 250 gms per Sqm with a road marking machine as per IRC: 35 complete with traffic diversion arrangement as per MORTH specification clause 803.4.

Providing & fixing Two way reflective metal body raised road studs with anchor with shank 100x100x19.8 and 2x43 pieces special reflective elements 19 degree tilted etc. complete made by swareflex at 9 m. centre to centre on edge lenes, lane lines and 1 m. centre to centre on pedestrai crossing including fixing, cost of conveyance of all materials to site including labour and hire charges for machineries involved etc. complete as per standard specifications and directions of the Engineer-in-charge..

Providing and laying built up spray grout patching 75mm thick in two layers (each layer consisting of spreading aggregate (crusher broken) @.50 cum per 10 Sqm area as per MoRTH specifications, laying first layer after application of tack coat@3.75 kg per 10 sqm ( including cost of tack coat) rolling with 8-10 tonne power oad roller application of first spray of binder @15kg/Sqm spreading and rolling of second layer of course aggregate with 8-10 tonne power road roller application spray of binder @15Kg/10 sqm and laying key aggreage on the top of second layer and rolling with 8-10 tonner power roller including heating and spraying of binder, cleaning of the area of patch, pot holes, cut to regular shape with vertical sides, removing all loose and disintegrated material inclusing cost of coarse aggregate key aggregate rolling and hire charges of machinery Y&P fuel bitumen etc. complete