Rajasthan Rajya Vidyut Prasaran Nigam Limited Tender

Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , .(B-20 / 4.9)

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.Tremo Mechanically treated bars(Confirming of relevent IS Code) 4.13.3

Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ).

B-23/5.1.1 Brick work with common burnt clay F.P.S. bricks of class designation 7.5 upto plinth level in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse sand ) with F.P.S ( Non modular ) Bricks.

Cement concrete flooring grade 1:2:4 finished with a floating coat of neat cement including cement slurry , making lines or grooves etc complete but excluding the cost of nosing of steps etc. complete :.40 mm thick with 20 mm thick nominal size aggregate. ( B /11.3.1)

B-12.3.2 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick

Structural steel work welded in single up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 Mtr. height in R.S. Joists flats, tees, angles and channels.(B-92/9.1

providing and fixing welded mesh/expanded metal mesh in frame work flat iron beading 20x3 mm including top cross laps inside and out side welding iron bolts crews clips etc complete excluding frame work of size welded mesh 25x25x2.1 mm 9.38.3

P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant110mm dia. (S-35/ 3.16.3)

surface dressing of ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead upto 50mtr and lift upto 1.5mtr all kind of soils

11.38.1(B) Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks: 1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color: Grey cement natural colour 4) Variation in dimension: Less than 1.6mm. 5) Variation in thickness: Less than 3.2mm 6) Abrasion: As per BS: 6717:2001 11.38.1(B)

Chapter G-3 , G-5 ,22 Stone aggregate (Single size) : 40 mm nominal Size Add extra for lead of 245 km(990+240+7.0*225=2805)

Construction of chamber in all type of soil with 230 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 40mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 450X450 mm depth upto 0.5 M Cement concrete cover with frame. (S- 3.21.2-3.21.2.1)(2332-508)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 12.46.1

P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 100 mm dia nominal bore b class 2.2.9