Rajasthan Rajya Vidyut Prasaran Nigam Limited Tender

Providing and laying in position specified grade of reinforced cement concrete for all RCC structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size) (B-4.1.)

Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , .(B-20 / 4.9)

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.Tremo Mechanically treated bars(Confirming of relevent IS Code) 4.13.3

B-23/5.1.2 Brick work with common burnt clay F.P.S. bricks of class designation 7.5 in foundation and plinth in : cement mortar 1:6 (1 cement : 6 coarse sand ) with F.P.S ( Non modular ) Bricks.

B-12.3.2 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick

Structural steel work welded in single up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 Mtr. height in R.S. Joists flats, tees, angles and channels.(B-92/9.1+9.1.1

Cement concrete flooring grade 1:2:4 finished with a floating coat of neat cement including cement slurry , making lines or grooves etc complete but excluding the cost of nosing of steps etc. complete :.40 mm thick with 20 mm thick nominal size aggregate. ( B /11.3.1)

P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant110mm dia. (S-35/ 3.16.3)

surface dressing of ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead upto 50mtr and lift upto 1.5mtr all kind of soils

11.38.1(B) Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks: 1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color: Grey cement natural colour 4) Variation in dimension: Less than 1.6mm. 5) Variation in thickness: Less than 3.2mm 6) Abrasion: As per BS: 6717:2001 11.38.1(B)

Chapter G-3 , G-5 ,22 Stone aggregate (Single size) : 40 mm nominal Size R-1 1.1(13) Add extra for lead of 186 km(990+240+7*110=)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 12.46.1