Rajasthan Rajya Vidyut Prasaran Nigam Limited Tender

P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mm B-7.14.2

B-12.2.3+ Plaster on new surface on walls in cement sand mortar 1:4 including racking of joint etc. complete fine finish :12mm thick

B-12.37.2 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:Old work (one or more coats) including scrapping surface and necessary repairs.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. B-12.37.1

Providing and applying white cement putty over plastered surface to prepare the surface even and smooth complete 12.22.1

B-12.43.2 Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision on old work

B-12.48.2 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work.

B-13.4.1 Renewing glass panes,with putty and nails wherever necessary Float glass panes. Of 4mm thick

B-13.24 Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc.

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 30 mm thick . Commercial Veneer both side B-8.13.2 A

Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint MS sheet 18 S.W.G. ( 1.00 mm thick) B-9.17

B-23/5.2.2 Brick work with common burnt clay F.P.S. bricks of class designation 7.5 in superstructure above plinth level upto floor 5 level in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse sand ) with F.P.S ( Non modular ) Bricks.

B-24/5.8.3 Half brick masonry with common burnt clay F.P.S. ( Non modular ) bricks of class designation 7.5 in super structure above plinth level upto floor five level. cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). B-7.12

Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). B-7.13

Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges Kota stone 25 to 30mm thick. :B-6.17.3

P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 550 mm x 400 mm S-1.36.3

S-1.43.2 P&F waste pipe with all fittings PVC with PVC nut 32mm.

S-2.10.1 P & F G.I. Pipes with G.I.fittings (IS :1239 mark) & MS clamps including cutting and making good the walls and floors: (Internal works) (A) Exposed on walls 15 mm dia nominal bore Class-B

S-2.10.3 -------do----25mm dia nominal bore.

P & F 1.0mm thick salem stainless steel AISI -304 kitchen sink & IS 13983 with C.I. brackets and stainless steel plugs 40mm including painting of fittings and brackets,cutting and making good the wall whenever required :Kitchen sink without drain board , stainless steel kitchen sink -without drain board , 24x18x8 bowl 20x16x8. S-1.38.9.3

S-2.6.1 P & F Pillar cocks (IS :8934 mark) of superior quality and approved make. C.P.Pillar cock, 15 mm dia nominal bore.

S-2.7.1 P & F Bib cock (IS : 8931 mark) superior quality of approved make: Brass 400 grm, 15 mm nominal bore.

S-2.7.4 ------do----C.P.Brass Long body, 15 mm nominal bore weight not less than 690 gm.

S-2.11.2 P & F Ball cock (IS : 1703 mark) with rod & P.V.C. ball complete : Brass wt. 400 gm. 15 mm

S-2.12 P & F Inlet connection (Angle Valves) Superior quality, of approved make, for wash basin, gyser etc. C.P.Inlet connection 15 mm brass (IS : 8931 marked)

S-21/2.13.2 P & F 15mm dia connection pipe of approved quality/make 15mm nominal bore PVC pipe with C.P.brass nuts upto length 450mm

S-2.14.3 P & F Flush Cock/Flush Valve (IS : 9758 marked) for WC of approved quality make: Brass gun metal half turn wt. 1 Kg of approved quality/make 25mm nominal bore.

S-2.15.1 P & F Full way Valve (IS : 778 mark) or wheel valve of approved make : Gun-metal 15 mm nominal bore.

S-1/1.2.2 P & F Indian type white glaged vitreous china I st quality W.C.orissa pan (IS : 2556 mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580 x 440 mm.

P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity. S-2.26.3

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia S-3.16.3

Construction of chamber in all type of soil with 230 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 40mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 300 X 300 mm depth upto 0.5 M Cement concrete cover with frame. S- 3.21.1

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:(A) Bend 87 .5 110 mm dia S-3.17.9B

P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVC bend as per IS : 7231 .S-1.20.3

Supplying & Fixing Ferrow cement covers with CI frame for chamber and manholes approved make 450 mm dia S-3.32.1

P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor S-1.3

P & F water closet Seat Covers with brass hinges complete : Solid PVC (IS 2548 marked) grade-I White for EWC. S-1.7.2

P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. S-1.59

10.27 P&F of false ceiling at a height decided by the engineer in charge on a MS made skeltion frame work. The perimeter square MS pipe shall be fixed along with the wall, having dismension of 25mm and with a wall thickness of 1mm+/- 0.3mm. The main member of the gradeis made out of MS pipe having on a overall thickness 38x25mm and with a wall thickness of 1mm +/- 0.3mm. The side pipe and the intermediate pipes is fixed to the roof from the top with the help of ceiling angels / pipes.After the grid work is complete, it has to be covered by the multi-chamber hollow PVC section from below, with the help of self tapping scrw of 19mm x 8mm. These PVC hollow section are having an overall dimension of 150mm x10mm or 254mm x 6mm, with a wall thickness of 1.0m + 0.3mm and 0.8 + 0.2mm respectively approved by the engineer in chareg, are jointed wtih each other by lap joint, which will conceal the screws. Necessary cutouts for electric connections, lighting, air conditioning etc. shall be provided at reqd. palace. The edge and cornice shall be covered by extruded PVC corner beading section of size 13m x10mm with a wall thickness of 1.7mm+ 0.3mm. The same has to be fixed by applying cynoacrylate adhesive.