Rajasthan Rajya Vidyut Prasaran Nigam Limited Tender

B-14/4.1 Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix

B-16/4.9 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation, footings, strap beam, raft, bases of columns etc.

(B-18/4.13.2) Providing & fabricating reinforcement for RCC work incl. straightening,cutting,bending,placing in position and binding (Incl cost of binding wire)all complete floor V level:hot rolled deformed bars

S-42/3.19.3 P&F rigid PVC pipe (IS 4985 mark) class IInd /4 Kg P.SqCM ) approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant 110mm dia

(B-62/11.28) Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks: 1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color: Grey cement natural colour 4) Variation in dimension: Less than 1.6mm. 5) Variation in thickness: Less than 3.2mm 6) Abrasion: As per BS: 6717:2001

(G-2/293+G-33/4.2.14) Supply and stacking 40 mm single size aggregate/ballast free from kutch stones, organic matter and vegetationncluding loading ,unloading& transportation with in a lead of 30 km complete in all respect as per dirction of engineer incharge

(B-63/11.30) providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3(1cement : 3coarse sand ) including making joints with without grooves (thickness of joints except at sharp curve shall not to more than 5 mm ) including making drainage opening wherever required complete including painting etc. as per direction of Engineer incharge (length of finished kerb edging shall be measured for payment) (precast C.C. kerb stone shall be approved by Engineer-in-charge)

(G-33/4.1.7) Disposal/carriage of earth including loading, unloading and transportation with in a lead of 3.0 Km complete as per direction of Engineer incharge

B-14/14.3 Demolishing RCC work manually/by mechanical means incl. stacking of steel bars and disposal of unserviceable material within 50m lead as per direction of EIC in cement mortar