Rajasthan Rajya Vidyut Prasaran Nigam Limited Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 3,65,800Document Cost
₹ 5,900Tender Fee
₹ 2,360
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_RRVPN_380642_3Bid Award Id
ViewTender No
NIT No. 19 (2023-24) SE (Civil) JodhpurTender Authority
Rajasthan Rajya Vidyut Prasaran Nigam Limited ViewPurchaser Address
-Website
http://http://energy.rajasthan.gov.in/content/raj/energy-department/rajasthan-rajya-vidyut-prasaran-limited/en/home.html
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
(B-54/3.1.1) Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering, All work up to plinth level. M20 grade nominal mix 1:1.5:3 (1-Cement:1.5-coarse sand:3-graded stone aggregate 20 mm nominal size).
15
73725
4915
... More
(B-69/6.1.6) Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand).
824
2338512
2838
... More
(B-69/6.2.6) Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in: Cement Mortar 1:6 (1-Cement:6-Sand).
690
2400510
3479
... More
(B-69/6.3.4) Add extra for Random Rubble stone masonry with hard stone in walls upto 30 cm & less thickness.
679
126294
186
... More
(B-69/6.3.1) Add extra for Random Rubble stone masonry with hard stone in Square or Rectangular pillars.
57
9861
173
... More
(B-70/6.4.2) Add extra for facing as per design and detailed specifications including additional cost of stones. Course rubble Second sort.
1933
949103
491
... More
(B-55/3.2.2) Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, plain window sills, fillets etc up to floor three level excluding the const centering and shuttering. M-15 grade 1:2:4 (1-Cement:2-coarse sand:4-graded stone aggregate 20 mm nominal size).
20
102240
5112
... More
(B-55/3.2.4) Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, plain window sills, fillets etc up to floor three level excluding the const centering and shuttering. M10 grade Nominal Mix. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
33
142560
4320
... More
(B-56/3.8) Providing & fixing precast cement concrete coping 1:2:4 mix 50 mm thick complete as per specification.
455
166985
367
... More
(B-143/12.31.3) Pointing on stone masonry in cement sand mortar 1:3 (1-Cement:3-Sand): Deep groove pointing.
1388
305360
220
... More
(B-143/12.31.2) Pointing on stone masonry in cement sand mortar 1:3 (1-Cement:3-Sand): Raised and cut pointing.
1810
421730
233
... More
(B-48/1.25) Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth , consolidating each deposited layer by ramming and watering including lead upto 50Mtr and with all lift.
264
16896
64
... More
(B-62/4.13.3) Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code).
14630
1126510
77
... More
(B-59/4.1) Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix.
28
138152
4934
... More
(B-59/4.2) Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix.
4
22436
5609
... More
(B-59/4.3) Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix.
129
668865
5185
... More
(B-61/4.9) Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns, etc.
251
39407
157
... More
(B-61/4.10.2) Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.
1080
367200
340
... More
(B-61/4.10.3) Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for: Columns, pillars, posts and struts etc.
235
88125
375
... More
(B-61/4.11) Add extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan are is to be measured)
62
10602
171
... More
(B-65/5.2.2) Brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes & sizes in. Cement Mortar 1:6 (1-Cement:6-Sand).
10
49900
4990
... More
(B-66/5.8.3) Half brick masonry in Superstructure, above plinth level upto floor V level using bricks of designation 75. Cement mortar 1:6 (1 cement : 6 coarse sand).
201
105726
526
... More
(B-139/12.3.1) Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 25 mm thick.
2717
573287
211
... More
(B-139/12.3.2) Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick.
240
45600
190
... More
(B-139/12.3.3) Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 12 mm thick.
243
38880
160
... More
(B-139/12.2.3) Plaster on new surface on walls in cement sand mortar 1:4 including racking of joint etc. complete fine finished: 12 mm thick.
442
72046
163
... More
(B-139/12.5) 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)
478
66442
139
... More
(B-109/10.22) Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design.
261
28971
111
... More
(B-109/10.24) Providing & laying broken glazed tiles on roof (broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm (1.40 Kg of VG-40 (30/40) grade and 0.30 Kg/Sqm of VG-10 (80/100) grade) and joints filled with cement mortar 1:2 (1 cement : 2 marble dust) mixed with water proofing compund all complete as per direction of Engineer-in-charge.
420
133140
317
... More
(B-50/1.35.3) Diluting and injecting by hand operated pressure pumps chemical Emulsion timber ground treatment [TCGT] in ratio 1: 2 as per manufacturers specification for Post Constructional Anti-termite treatment (as per IS 6313) part - III 1971 as amended from time to time) (excluding the cost of chemical emulsion): Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
293
25491
87
... More
(B-50/1.35.2) Diluting and injecting by hand operated pressure pumps chemical Emulsion timber ground treatment [TCGT] in ratio 1: 2 as per manufacturers specification for Post Constructional Anti-termite treatment (as per IS 6313) part - III 1971 as amended from time to time) (excluding the cost of chemical emulsion): Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
81
1377
17
... More
(B-49/1.34) Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20%.
35
8505
243
... More
(B-98/9.5) Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
95
7885
83
... More
(B-99/9.6.2) Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge: Profile C.
97
45493
469
... More
(B-99/9.6.3) Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge: Profile E.
58
29348
506
... More
(B-93/8.13.2.1+B-93/8.14) Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A': 30 mm thick. Commercial Veneer both side. Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured).
70
138740
1982
... More
(B-91/8.5.2.3 + B-93/8.11) Providing and fixing fully panelled /partly panelled double leaf shutters frame for windows and ventilators as per approved design and drawings with approved steel fittings as per Annexure A and width of styles, bottom and top rails 75mm including intermediate rails 50 mm wide, beading of 25mm x 15mm size on both faces: 30 mm thick. Shesham wood grade-I. Deduct for providing Single leaf shutter instead of double leaf.
22
35992
1636
... More
(B-92/8.6.9) Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). SS wire gauge 14 mesh x 24 gauge.
18
16686
927
... More
(B-100/9.17) Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint.
16
45904
2869
... More
(B-104/9.39) Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge
17
66215
3895
... More
(B-100/9.13) Supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm. long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design & IS 6248- 1979. (Clear openable area to be measured for payment).
6
12444
2074
... More
(B-101/9.19.3) Providing and fixing steel glazed doors, windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required: Windows side hung /Ventilators top or centre hung (openable).
37
115995
3135
... More
(B-102/9.26) Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.
37
22829
617
... More
(B-102/9.27) Providing and fixing Square bars or other flat welded to window, ventilatiors etc.
261
16965
65
... More
(B-95/8.25.2) Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm.
46
12236
266
... More
(B-98/9.2) Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete.
1700
137700
81
... More
(B-99/9.8) Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.
5870
563520
96
... More
(B-103/9.33 + B-103/9.35) Providing & fixing of black barbed wire in lines between the post fitted & fixed with G.I. staples Barbed Wire in postion. Add for using galvanizing barbed wire instead of black barbed wire.
5050
63630
12.6
... More
(B-104/9.38.3) Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. Welded mesh 25 mmx 25 mm x 2.1 mm.
58
43500
750
... More
(B-98/9.3.2) Steel work in built up tubular trusses including cutting, hoisting (height upto 10 m) fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished seamless type tubes.
1390
151510
109
... More
(B-105/10.1) Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 0.63 mm thick with zinc coating not less than 275 gm/m2.
100
64500
645
... More
(B-82/6.88-ii) Supply and fixing Jodhpur sand stone machine cut dassa, coping, sill, lintel fixed in cement sand mortar 1:4. 9 cm (3.5") thick.
108
224748
2081
... More
(B-132/11.18.1) Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand). For area of each slab from 901 to 2000 Sq.Cm.
358
340100
950
... More
(B-132/11.19.1) Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. For area of each slab upto 2001 Sq.cm.
46
41952
912
... More
(B-72/6.17.3) Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges: Kota stone minimum 30mm thick.
55
33495
609
... More
(B-86/7.12) Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).
108
72792
674
... More
(B-86/7.13) Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (Including the cost of cement mortar bed).
34
25432
748
... More
(B-83/7.3.3) Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Keseriaji/ Abu Ambaji (Green Marble). Above 3601 Cm2 Slabs.
16
26784
1674
... More
(B-131/11.17.1+B-131/11.17.5) Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand). Light shade using shade cement. Add Extra for polished chequered precast cement concrete tiles.
105
65950
628.1
... More
(B-132/11.20) Rough Chisel dressed Kota stone 35 mm thick flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 (1 cement : 6 coarse sand) and pointing with cement sand mortar 1:3 with pigment to match the shade of stone with joint thickness up to 15 mm complete in all respects.
58
36366
627
... More
(B-135/11.38.1.A) Providing and laying of paver block as per IS 15658 : 2006 and IRC : SP:63-2004. Category A denated units to key into each other on four faces zigzag shape as per IRC SP 63:2004. M-30, 60 mm thick to be used in non traffic areas like building premises, monument premises, land scapes, public gardens/park, domestic drives, paths and patios, Embankment slopes,sand stabilization Area etc.
98
79968
816
... More
(B-136/11.38.3.A) Providing and laying of paver block as per IS 15658 : 2006 and IRC : SP:63-2004. Category A denated units to key into each other on four faces zigzag shape as per IRC SP 63:2004. M-40, 80mm thick to be used in medium-traffic like city streets, small and medium market roads, low volume roads, utility cuts on arterial roads, etc.
234
254826
1089
... More
(B-128/11.3.1) Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete.40mm thick with 20mm thick nominal size aggregate.
8
2216
277
... More
(B-63/4.19) Providing, hoisting and fixing up to floor five level precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening, cleaning, fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand ) etc. complete as per approved design excluding plastering of jambs, sills and soffits. 50 mm thick.
30
18900
630
... More
(B-142/12.23) Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
1890
130410
69
... More
(B-142/12.22.1) Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. New plastered surface (three or more coats).
300
25200
84
... More
(B-146/12.45.1) Applying priming coat with ready mix pink or grey primer of approved brand and manufacture on wood work hard and soft wood.
129
3741
29
... More
(B-144/12.37.1) Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer.
1890
141750
75
... More
(B-145/12.43.1) Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision. New work.
1172
144156
123
... More
(B-146/12.46.1) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
727
50163
69
... More
(B-144/12.35.1) Colour washing of all shades to give an even shade including all scaffolding. New work (two or more coats) with a base coat of white washing with lime.
900
12600
14
... More
(B-143/12.34.1) White washing with lime to give an even shade including all scaffolding: New work (three or more coats).
410
4510
11
... More
Part- B [P.W.D. Rajasthan Integrated Building BSR 2022 (Sanitary)]
(S-257/3.44.2) Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110 mm dia.
483
162288
336
... More
(S-257/3.45.1.ii) Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipe fittings type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110 mm dia. Coupler.
63
6804
108
... More
(S-257/3.45.4.ii) Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipe fittings type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110 mm dia. Bend 87.5.
44
6820
155
... More
(S-259/3.45.26) Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipe fittings type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110 mm dia. Nahni Trap without Jali 4".
22
3344
152
... More
(S-258/3.45.17.ii) Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipe fittings type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110 mm dia. Single Tee with Door.
13
3146
242
... More
(S-259/3.45.30) Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipe fittings type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110 mm dia. Vent Cowl.
9
531
59
... More
(S-259/3.45.24) Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipe fittings type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110 mm dia. Gully Trap.
4
2740
685
... More
(S-259/3.45.20) Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipe fittings type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110 mm dia. Offset.
31
8742
282
... More
(S-258/3.45.12.ii) Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipe fittings type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110 mm dia. Pipe Clip.
107
3317
31
... More
(S-217/1.2.2) P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.
5
15400
3080
... More
(S-217/1.3) P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor
4
9680
2420
... More
(S-219/1.20.2) P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : PVC with PVC bend as per IS : 7231.
9
11619
1291
... More
(S-218/1.7.4) P&F water closet Seat Covers with brass hinges complete: Non-breakable of other approved make white.
4
1408
352
... More
(S-226/1.59) P&F Jet spray for water closet with C.P. Copper Tube flange of approved make.
4
1524
381
... More
(S-222/1.38.9.2) P&F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor: 1.0 mm thick stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling. Overall size: 22 x 18 x 7 bowl size: 20x16x7.
5
21650
4330
... More
(S-221/1.36.3) P&F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall: Size 550 mm x 400 mm.
9
23382
2598
... More
(S-240/2.37.1) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge (Exposed on wall). 15 mm nominal size.
183
34953
191
... More
(S-240/2.38.1) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.). 15 mm nominal size.
88
24552
279
... More
(S-240/2.39.3) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 25 mm nominal size.
15
3930
262
... More
(S-236/2.26.3) P&F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres Capacity.
11
43120
3920
... More
(S-232/2.11.1) P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete : Brass wt. 300 gm, 15 mm.
11
3454
314
... More
(S-15/2.2.1) P&F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc. 'B' Class. 15 mm Dia Nominal bore.
160
30400
190
... More
(S-15/2.2.3) P&F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc. 'B' Class. 25 mm Dia Nominal bore.
135
37530
278
... More
(S-15/2.2.6) P&F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc. 'B' Class. 50 mm Dia Nominal bore.
125
61375
491
... More
(S-233/2.15.1) P&F Full-way Valve (IS:778 Mark) or Wheel Valve of approved make. 15 mm Dia Nominal bore.
32
7264
227
... More
(S-233/2.15.3) P&F Full-way Valve (IS:778 Mark) or Wheel Valve of approved make. 25 mm Dia Nominal bore.
12
6348
529
... More
(S-234/2.15.6) P&F Full-way Valve (IS:778 Mark) or Wheel Valve of approved make. 50 mm Dia Nominal bore.
2
2928
1464
... More
(S-232/2.7.3) P&F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C.P. Brass bib cock 15 mm nominal bore.
13
7670
590
... More
(S-232/2.7.4) P&F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C.P. Brass bib cock, Long Body, 15 mm nominal bore weight not less than 690 gm.
26
20358
783
... More
(S-232/2.8.5) P&F Stop Cock (IS :8931 Mark), superior quality & of approved make: C.P. Brass concealed stop cock 15 mm nominal bore.
51
51459
1009
... More
(S-225/1.55.3) P&F Bath Shower of approved quality/make. C.P. brass of Heavy & superior quality, revolving with adjustable key 150mm.
8
4584
573
... More
(S-223/1.45.1) P&F looking mirrors with PVC frame of approved (atul/equivalent). Size 500x400mm.
9
3159
351
... More
(S-225/1.52.2) P&F Soap dish or tray of approved quality/make: C.P. brass heavy and superior quality.
16
2496
156
... More
(S-223/1.47.2) P&F Towel Rail or Ring of approved quality/make: C.P. Brass towel rail elbow type with concealed screws size 600 mm (heavy duty).
9
4644
516
... More
(S-224/1.47.8) P&F Towel Rail or Ring of approved quality/make: C.P. Brass towel ring revolving type.
9
2286
254
... More
(S-224/1.48.2) P&F Grating of approved quality/make: Stainless steel sheet heavy duty of approved quality/make size. 125 mm dia.
32
3104
97
... More
(S-233/2.13.3) P&F 15 mm Dia Connection Pipe of approved quality/make: PVC pipe with C.P. Brass nuts up to length 450 mm.
46
4646
101
... More
(S-243/3.2.1) Providing & Laying C.C. 1:5:10 (Stone aggregate 40 mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete as per Rajasthan P.W.D. specifications : (Width W=Diameter of pipe in Cm + 30 Cm.) (Excluding cost of pipe). 100 mm dia.
292
133444
457
... More
(S-255/3.39.2) Construction of Cement Concrete Chamber 125mm dia on depressed floor upto 45cm height from floor with: C.P. doom grating.
6
1578
263
... More
(S-250/3.19.1) Construction of manhole in all type of soil inner size 90 X 60 Cm, 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.5 M.
21
115269
5489
... More
(S-251/3.21.1) Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame.
20
20980
1049
... More
(S-253/3.27.1) Construction of septic tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr: Size 200 x 100 x 130 cm (for 10 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 8mm ϕ @15 cm c/c bothways including shuttering complete in all respect.
3
81966
27322
... More
(S-252/3.22.1) Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr: Size 300 Cm dia outside & 300 Cm depth.
3
72405
24135
... More
Part-C [P.W.D. Rajasthan Electrical BSR 2022]
(E-1/1.1.1) Wiring of light point/ fan point/exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch, Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. Short point (up to 3 mtr.)
81
29079
359
... More
(E-1/1.1.2) Wiring of light point/ fan point/exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch, Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. Medium point (up to 6 mtr.)
50
28900
578
... More
(E-1/1.1.3) Wiring of light point/ fan point/exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch, Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. Long point (up to 10 mtr.)
11
8492
772
... More
(E-2/1.3.1) Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. On board.
55
19635
357
... More
(E-1/1.2.2) Wiring of twin control light point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P-III ) PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 2 Nos Hot Dipped Galvanized M.S Modular box of 1.2 mm thick with earth terminal,2 Nos10 A two way Modular switch, 3 pin ceiling rose / holder / 3 way connector ,Modular face plate with grid plate, screws, making connections, testing etc. as required. Medium point (up to 6 mtr).
4
4548
1137
... More
(E-9/4.1.2) Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. 2 x 1.5 sq.mm
20
860
43
... More
(E-9/4.1.6) Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. 2 x 2.5 sq.mm
395
24095
61
... More
(E-9/4.1.11) Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. 2 x 4.0 sq.mm
370
34410
93
... More
(E-2/1.4.2) S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. 25 mm.
240
13440
56
... More
(E-33/7.37) Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required.
53
30740
580
... More
(E-31/7.29.1) Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required.
21
8358
398
... More
(E-30/7.26) Providing & Fixing of ding dong/musical chime bell as per PWD specification for electrical Works, including making connection testing etc. as required.
4
1312
328
... More
(E-87/17.2.2) Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture. system lumen efficacy ≥ 100 lm/Watt output, internal surge protection of 2.5 KV ,THD 20% ,p.f.≥0.95,CRI 80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. 1200mm, Min. Lumens output 2000 lm LED Tube rod with Polycarbonate Housing.
30
8100
270
... More
(E-90/17.9.3) Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulb in existing holder or fixture as required with system lumen efficacy ≥100 lm/Watt output ,pf 0.95 , CRI 70, minimum life time of minimum 25000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. 9W.
26
2990
115
... More
(E-89/17.6.1) Providing & Fixing of IP65 IK08 rated Integrated SMD Mid power LED bulk head type light fixture made from Pressure Die Cast AL housing suitable with integral driver, system lumen efficacy ≥100 lm/Watt output , THD 10% ,p.f.≥0.95,CRI 80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. surge protection 4 KV. Minimum lumen output 1000 lm.
14
23058
1647
... More
(E-95/18.12.5) Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy =125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @=300 V AC and Auto resetting Safety , Power Factor 0.95 driver Efficiency 85% ,THD(I) 10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current 750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI 70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced. All as per pre approved by Engineer in charge. LED Street Light fixture with Minimum lumen output 8700 lm.
7
40929
5847
... More
(E-96/18.18.3) Providing & Fixing of Street light bracket made out from following size of ' B ' class , Medium class G.I. Pipe confirming to IS : 1239 P - 1 ( 2004 ) with heavy duty pole clamp, Saddles suitable fastners etc. as required. All as per pre approved by Engineer in charge. 32 mm Dia.
7
5194
742
... More
(E-15/5.9) P & F 1.2 mm thick M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge.
21
2688
128
... More
(E-81/15.7.3) Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm Sweep BEE 3 Star rated (service value =5.0 to 5.5 ).
21
45990
2190
... More
(E-81/15.11.1) Providing & Fixing of of Double ball bearing, copper wounded capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor ,making connections, testing etc. as required. All as per pre approved by Engineer in charge. 225mm sweep.
4
6748
1687
... More
(E-22/6.10.1.1) Providing & Fixing of recessed/surface mounting heavy duty horizontal type double door (metal/glazed) distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only) 100 amp. insulated copper bus bar/shorting link, copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. Metal door (single phase) IK-09 and IP-43 with Metal end box. 4 Way (4+2).
2
3590
1795
... More
(E-22/6.10.1.4) Providing & Fixing of recessed/surface mounting heavy duty horizontal type double door (metal/glazed) distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only) 100 amp. insulated copper bus bar/shorting link, copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. Metal door (single phase) IK-09 and IP-43 with Metal end box. 12 Way (8+2).
4
10360
2590
... More
(E-17/6.1.1.2) Providing & Fixing of 240/415V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. Single pole MCB (with B/C curve tripping characteristics). 6A to 32A rating.
42
7854
187
... More
(E-18/6.2.1.2) Providing & Fixing of 240/415 V isolator ISI marked IS:13947-III/conforming to IEC 60947-3, suitable for AC22A utilization category, 4KV impulse withstand voltage, true contact indication, Red colour dolly / lever shall have single mould covering over all poles for operation, two position din rail mounting, minimum phase termination capacity of 35sq.mm. IP 20 contact protection and fitted in existing distribution board / sheet including making connections, testing etc. as required. Double pole isolator. 63A rating.
6
2718
453
... More
(E-11/4.6.2) Supply & drawing wiring for sub mains ISI marked (IS:694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. Support wire duly clipped etc. as required. 6.0 sq.mm.
60
4380
73
... More
(E-73/14.3) Plate Earthing with copper Earth plate of purity 95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge.
4
60576
15144
... More
(E-75/14.6.6) Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu thimble etc. as required. All as per pre approved by Engineer in charge. 10 SWG Copper Wire.
125
12125
97
... More
Part-D [P.W.D. Jaisalmer Road BSR 2022]
(R-24/4.19.3) Providing and laying granular sub-base material (From Natural Quarry) having P.I.not more than 6, including spreading in layers not exceeding 150 mm compacted thickness and consolidation by 8-10 tonne power roller to required camber and grade including cost of water and hire charges of machinery, including T&P with 20 KM lead (compacted thickness to be measured) as per MORTH specification table 400-1, 400-2 : For grading-III with CBR value not less than 20. To attain 100% proctor density.
132
39864
302
... More
(R-32/6.2) Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing.
97
490820
5060
... More
(R-38/8.6) Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.
3.6
54918
15255
... More
Part-E [P.W.D. Jaisalmer Road BSR 2013]
(R-77/16.30.5) S&F of M-20 grade precast cement concrete kerb or dand upto 60cm length over 20 mm thick base of cement mortar 1:6 incl. Jointing earth work, painting & jointing with cement mortar 1:4 of size: (20 + 25)/2 x 30 cm.
390
152100
390
... More
Part-F [P.W.D. Rajasthan Integrated Building BSR 2022 (Horticulture Part)]
(H-271/1.3.1) Supply & Stacking good earth at site complete including loading unloading and transportation etc.
290
69600
240
... More
(H-271/1.1.3) Supply of dry manure including loading unloading, transportation & stacking at site. Goat dungmanure.
75
90000
1200
... More
(H-278/2.1.1) Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately).
365
8760
24
... More
(H-280/3.1.2) Laying of lawns including plugging leveling breaking of clods maturing & removal of stones etc. (Cost of manure or extra good earth to be paid separately) Maintenance of lawns for 30 days sor more till the grass forms a thick lawns free from weeds & fit for mowing in the duration of planting if lawn die some where the contractor will replant it at his own cost.In rows 7.5 Cms. apart in either direction.
6.7
36850
5500
... More
(H-273/1.10.3) Supply of PVC hose pipe of different sizes at store including transportation etc. complete : 25mm dia.
60
4800
80
... More
(H-272/1.5.1) Supply of Garden Tools & Implements at store complete: Spade weighing 1.5 Kg. with Handle.
1
175
175
... More
(H-272/1.5.2) Supply of Garden Tools & Implements at store complete: Khurpa weighing 500 gm with Handle.
2
180
90
... More
(H-272/1.5.4) Supply of Garden Tools & Implements at store complete: Hedge Shear (Kamani Steel).
1
720
720
... More
(H-272/1.5.7) Supply of Garden Tools & Implements at store complete: Pick-Axe.
1
180
180
... More
(H-272/1.8.2) Supply of different sized lawn mower including transportation etc. as store complete : 350mm size handle lawn mower(Roller Type)
1
4800
4800
... More
(H-272/1.6.2) Supply of different sized pots at site store including loading / unloading and transportation etc. complete : cement pot 350mm size.
25
5400
216
... More
(H-281/4.1(b)) Digging of pits size 60x60x60 cms. Including removal of stones/ Measuring applicable of insecticides & watering at least 15 liter per plant after planting.
325
9750
30
... More
(H-273/1.11.1) Supply of different varieties of tree / shrubs / climbers according to height and age of the plant at site including loading/unloading and transportation etc. complete. Different flowering plant 900 mm to 1500 mm.
100
15000
150
... More
(H-273/1.11.2) Supply of different varieties of tree / shrubs / climbers according to height and age of the plant at site including loading/unloading and transportation etc. complete. Different flowing shrubs 600 mm to 900 mm.
100
16000
160
... More
(H-273/1.12.1) Supply of different varieties of Bougainvillea in poly bags/earthen pots according to height growth and age of plant at site including loading/ unloading and transportation etc. complete. Local variety of Bougainvillea 600 mm to 900 mm.
50
3000
60
... More
(H-274/1.13.1) Supply of different varieties of Rose plants in polyethylene bag/ earthen pots according to height growth and age of plant at site including loading/ unloading and transportation etc. complete. Desi Rose/Root stock plants.
50
2500
50
... More
(H-274/1.15.1) Supply of different varieties of indoor plants in polyethylene bags/ earthen pots according to height growth and age of plant at site including loading/ unloading and transportation etc. complete. Desi Crotons.
50
3000
60
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements