Rajasthan Rajya Vidyut Prasaran Nigam Limited Tender

Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision old work. (B/12.43.2) @ 50/- P.Sqm

Dismantling tile work in floors and roofs laid in cement mortor including stacking of serviceable material and disposal of unserviceable material within 50 meter lead : For thickness of tiles 10 mm to 25 mm. (B/14.23.1) @ 20/- P.Sqm

Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). (B-7.13) @748/- P.Sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work. (B/12.46.2) @ 34/- P.Sqm

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). (B/7.12) @ 674/- P.Sqm

White washing with lime to give an even shade including all scaffolding IS 6278-1971 : Old work (two or more coats) including scrapping old surface and repairing with whiting wherever necessary. (B/12.34.2) @ 6.00/- P.Sqm

Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thick: Wire gauge 24 gauge 14 mesh of IS designation 85 gauge wires of dia 0.56 mm ( B/8.6.8)@ 695/- P.Sqm

Renewing glass panes, with puty and nails wherever necessary: 4 mm thick plain glass panes. (B/13.5.1) @ 765/- P.Sqm

Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision New Work (B/12.43.1) @ 123/- P.Sqm

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate. (B/16.6.1) @1426/-

Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With glass panes of 5.0mm thickness (weight not less than 13.75 Kg/Sqm (B/16.5.2) @ 902/- P.Sqm

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete: 40 mm thick with 20 mm thick nominal size aggregate. (B/11.3.1) @ 277/- P.Sqm

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) :Dark shade using ordinary cement. (B/11.17.3) @523/-

Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge. (B/10.24) @ 317/-

Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :Kota stone minimum 30mm thick.(B/6.17.3) @ 609/- P.Sqm

Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand) Add extra providing and placing in position 2 Nos. ,6mm Ø M.S. bar at every third course of half brick masonry. (B/5.8.3+5.9) @ 590/- P.Sqm

Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps:- i) Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. ii) Applying Epoxy primer on the exposed steel bars. iii) Applying Epoxy hardener and resin mix (as per manufectured's specification) on concrete and steel bars with brush. iv) Spreading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. v) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete. vi) Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect. (B/13.29) @ 1568/- P.Sqm

Providing and Applying ACRYLIC emulsion polymer waterproofing chemical coating, on over roof on over roof slabs/terrace/balconies/parapet wall etc.with following method/specification: Paint the surface with regular paint brush so as to obtain approximately 0.3mm thickness coating. apply the 2nd coat next day at right angles to the 1st coat so that total thickness of the coating should be approximately 0.6mm coverage by using above formulation will be 40 ft2/ litre of chemical. painted surface does not require any external water curing since chemical will hold sufficient water for curing.After the primer coat Apply 2 coats of modified acrylic emulsion polymer water proofing compound having solar heat reduction properties coating @ 0.330 KG/SQM on the surface of the interval of 3-4 hours. Undulation on the surface is repair before the waterproofing work. (B/15.29) @ 526/- P.Sqm

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' . Commercial Veneer both side 30 mm thick shutter (B/8.14.2.1) @ 1841/- P.Sqm Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. (B/8.13) @ 141/-

Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab up to 901 to 2000 Sq. Cm : (B11.18.1) @ 950/- P.Sqm

Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) : Flush / Ruled/ Struck or weathered pointing. (B/12.31.1) @124/- P.Sqm

Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc.. (B/13.24) @ 220/- P.Sqm

Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete. (B/13.23) @ 332/- P.Sqm

Repair of door, window shutters including cost of material and labour for change of damaged Style / rail of teak wood 30mm thick/ Aluminium Section:4"wide. (B/13.33.1(a)) @ 266/- P.rm

Repair of door, window shutters including cost of material and labour for change of damaged Panel by Wire Gauge 14 mesh x 24 gauge. (B/13.33(b)ii) @ 534/- P.sqm

Making of hole in R.C.C. slab/wall/beams and masonary wall (width up to 450 mm) by core cutting machine complete as per direction of EI Diameter above 150mm. (B/13.34.2) @ 1663/- P.Nos

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: @ B/9.2 @ 81/- P.Kg

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work .(B/12.46.1 ) @ 69/-