Rajasthan Police Housing And Construction Corporation Limited Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 1,96,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_RPHCC_110273_3Bid Award Id
ViewTender No
NIT No. 06 of 2018-19 MD, RPHCCL, Jaipur/Tender Authority
Rajasthan Police Housing And Construction Corporation Limited ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Special Conditions
BOQ Items
Earth work in excavation by mechanical means (Hydraulic Excavator)/manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm in plan) including dressing of sides and ramming of bottoms,lift upto 1.5Mtr including taking out the excavated soil and depositingand refilling of jhiri with watering &ramming and disposal of surplus excavated soil as directed with in alead of 50 m all lead of soil
117.92
18277
155
Supplying Chemical emulsion in sealed container including delivering as specified Chlorpyriphos/Lindane emulsifiable concentrate 20%
12.77
2694
211
Diluting & injecting Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment)
127.74
5237
41
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering -ALL work up to plinth level 1:4:8(1 cement :4 coarse sand : 8 grade stone aggregate 40mm nominal size )
35.31
100942
2858.75
Random Rubble stone masonry for with hard stone in foundation and olinth in cement sand mortar 1:6 (1 Cement 6 Sand above 30cm thick wall.
82.5
202785
2458
Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns ,etc.
59.74
8184
137
Providing and laying in position specified grade of reinforced cement concrete for all RCC structural elements up to plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement : 3- coarse sand ) and making good the joints and cost of plastizers (if required) excluding the cost of centering, shuttering and reinforcement.M20 grade Nominal Mix/ Design Mix
11.5
47288
4112
Suspended floors, roofs landing starcases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills,chajjas,lintel,beam etc.
568.52
167713
295
Plinth Beam
-
-
-
Columns, Pillers, posts and struts etc
132.93
43202
325
Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 6 (1 cement : 6 coarse sand)
69.73
294469
4223
Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 6 (1 cement : 6 coarse sand)
36.92
18683
506
Add extra providing and placing in position 2 Nos. ,6mm Ø M.S. bar at every third course of half brick masonry .
36.92
2732
74
Providing and Laying in positiom specified grade of cement Concrete for RCC structural elements up to floor v Level including curing, compaction, finishing with rendereing in cement sand mortar 1:3 ( 1 Cement: 3 Coarse Sand) and making good the joitns and cost of plasizers (if required ) excluding the cost of centering and shuttering for beams, suspended floors,roofs,girders having slopes up to 150 , landings ,balconies,shelves, chajjas,lintels,bands,plain windows sills,staircases and spiral staircase etc M20 grade Nominal Mix/Design Mix
81.08
364049
4490
Providing and Laying in positiom specified grade of cement Concrete for RCC structural elements up to floor v Level including curing, compaction, finishing with rendereing in cement sand mortar 1:3 ( 1 Cement: 3 Coarse Sand) and making good the joitns and cost of plasizers (if required ) excluding the cost of centering and shuttering for Walls (any thickness) including attached pilasters, buttresses plinth and string courses, fillets, Columns, pillers, piers, abutments, posts and struts etc M20 grade Nominal Mix/Design Mix
10.82
55203
5102
Add extra for providing richer mixes respctively at all floor levels Providing M25 grade concrete by using min 410 kg of cement per cum instead of M 20 grade design mix
103.4
6204
60
Providing and fabricating reinforcement for R.C.C. work including straightening,cutting,bending,placing in position and binding (including cost of binding wire) all complete up to floor five level. Hot rolled deformed bars
13408.17
817898
61
Grading roof water proofing treatment with Cement concrete 1:2:4 (1-Cement: 2-coarse sand : 4-graded stone aggreate 20mm nominal size).
15.61
63610
4075
Making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges and making and finishing the out let complete.
10
1400
140
Providing and fixing 20mm thick precast terrazzo tiles of approved make, with marble chips of size up to 6mm laid over roof with neat cement slurry mixed with pigment to match the shades of tiles, including cutting, griding rubbing with machine complete on 20mm thick bed of cement sand mortar 1:4
126.84
40335
318
Precast terrazzo tiles of approved make 20mm thick with marble chips of size upto 6mm in skirting & risers, treads of steps and dados 12mm thick cement plaster 1:3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of :
5.87
3469
591
Ordinary cement without any pigment.
-
-
-
Providing batta (gola) 75mm*75mm in cement concrete(1:2:4) including finished with cement mortar 1:3 as per standard design
12.6
1272
101
Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade. 50 mm thick
15.35
19371
1262
Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :(a) Sand or other approved stone 50mm thick.
16.78
9782
583
(b) Kota stone 25 to 30mm thick.
7.23
3058
423
Providing and fixing Granite stone slab mirror plished and machine edge cut in Wall, Pillars, Steps, Shelves, Sills, Counters. Floors etc.Laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement : 2 marble dust ) with pigment to match the shade of the marble slab complete including grinding,rubbing and polishing of : Green /Black/Other granite Size above 3601 Cm2
29.37
108815
3705
Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work
110.6
23447
212
Carriage of earth, sand,lime,morrum,mannure or salb etc. including loading, unloading & staking as per specification etc. complete with lead of 10 Km.
165.21
17677
107
Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).
65.18
39955
613
Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).
11.13
7568
680
Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and MAT finished tiles.
76.31
5189
68
Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.
65.18
4432
68
P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mm
28.64
23713
828
kota stone slabs 25 mm thick in risers of steps, skirting, Dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab from 2001 to 5000 Sqcm.
13.2
11457
868
Kota Stone slab flooring 25mm thick over 20mm (average) thick base laid over and jointing with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq. Cm
203.19
180026
886
Extra for Mirror polishing on terrazzo/ Kota stone work where ever required to give high gloss finish complete.
216.39
22720
105
Fine grinded Gangsaw cut 30-35 mm thick stone flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement :4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI.Red sand stone (Karauli stone)
21.94
15687
715
Providing and Laying water proofing treatement in sunken portion of WCs bathroom etc by applying cement slurry mixed with water proofing cement compound consisting of applying: a) first layer of slurry of cement @0.488 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours b) Second Layer of slurry of cement @ 0.242kg/sqm mixed with water proofing cement compound @0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates shall include preparation of surface treatment & sealing of all joints, corners, junctions with polymer mixed slurry.
8.38
1843
220
Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification.
1.67
2055
1231
Random rubble dry stone Kharanja under floor.
2.64
2130
807
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. Complete fine finish: 25 mm thick
56.88
8133
143
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. Complete fine finish: 20 mm thick
426.78
54627
128
6mm thick cement plaster to ceiling of mix 1:3 ( 1 cement: 3 Coarse aggregate)
342.44
31846
93
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. Complete fine finish: 12 mm thick
476.41
50499
106
Making Grooves as per design in plaster 10mm to 20mm wide
190
1140
6
Making of drip course (Tapka) in cement sand mortar 1:6 width up to 40mm and 10mm thick as per approved design
80
800
10
Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 Ltr/10 Sqm over and including base coat of water proofing cement paint applied 2.2 Kg/10 Sqm
-
-
-
As outer plaster
426.78
32008
75
Wall painting with plastic emulsion paint of approved brand manufacture to give even shade icluding allscafolding (Two or more coats on new work including preparation of base with primer, putty lippy etc complete in all respect
818.85
51587
63
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand)
-
-
-
Dark shade using ordinary cement.
-
-
-
Ramp.
9
4077
453
Filing available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consoliding each deposited layer by ramming each deposited including layer by ramming and watering including lead upto 50Mtr
197.3
11048
56
Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete
1245.64
90931
73
Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C C block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge
-
-
-
a) Window openable.
28.08
92467
3293
b) Window fixed.
25.3
77443
3061
Extra for additional shutter in pipe section windows with wire gauge 14 mesh x 24 gauge
28.08
40238
1433
Providing and fixing Square bars or other flat welded to window, ventilators etc.
250
14250
57
Providing and fixing pressed steel mitred door frames confirming to IS 4351 manufacturing from commercial mild steel sheet of 1.25 mm( 16 gauge) thick ness including hinges jamb, lock jamb head and if required angle thresh hold of mild steel angle of section 50x 25 m , or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means , adjustable lugs with split and tail to each jambs including butt hinges 2.5 mm thick with mortar guards , lock strike plate and shock absorber as specified and aplying a coat of approved steel primer after pre traetment of the surfaceincluding filling with CC 1:2:4 (M15 grade) complete as directed by engineer incharge :-
-
-
-
a) Profile B
-
-
-
D3
33
12276
372
b) Profile C
-
-
-
D1
31.6
12829
406
c) Profile E
-
-
-
D2
15.8
6936
439
Supply and fixing in cement mortar welded hand railing made out of M.S round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paide extra) with priming coat red oxide.
-
-
-
Stair
200
14200
71
Extra for Providing D type pipe head as top of Hand Rail
200
1420
7.1
Providing and fixing steel gate grating and grills made of angles,tees,square bars or other flats black pipe with holdfast and fittings complete per design and drawing including cutting welding and fabrication with priming coat of red oxide.
100
8300
83
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
-
-
-
Mumty door
16.5
1138
69
Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint
-
-
-
Mumty door
2.05
5092
2484
Float glass panes of thickness 5.0 mm
6.62
4375
661
Providing and fixing external grade board solid core single lesf flush door shutters ISI 2202-67 marked using Phenol formal , dehydreresion in glue both sides with approved steel fitting complete as per Annexure 'A' Commercial Veneer both side 35mm thick shutter.
20.42
32304
1582
Extra for providing external lipping with 2nd class teak wood battens6mm minimum depth on all edges of shutter (over all area of door shutter to be measured) over item BSR item no 8.13
20.42
2491
122
Painting with enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.
161.96
8907
55
P&f rigid PVC Pipe (IS:4985 mark ) class 2nd (4Kg. / Cm) approvd quality / make including joining the pipe with solvent cement rubber ring and lubricant.110mm dia.
63.2
11881
188
P&F rigid PVC pipe fittings (IS; 4985 mark ) of approved quality / make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia.
-
-
-
a) Door Tee110mm dia
4
596
149
b) Bend 45 110mm dia
4
356
89
c) Door Bend (Left & Right)110mm dia
4
544
136
d) Pipe Clip 110mm dia
16
400
25
Part B - Sanitary work
-
-
-
P&F Indian type white glazed vitreous china 1st quality W.C. Orissa pan( IS. 2556 Mark) with 100 mm vitreous china Por S trap including cutting and making the wall and floor. Size 580mmx440 mm
4
8268
2067
P & F European type white glazed vitreous china 1st quality W.C. (IS : 2556 Mark) including cutting and making good the wall and floor Wall Mounting (syphonic)
2
7020
3510
P & F water closet Seat Covers with brass hinges complete :Solid PVC (ISI marked)White
2
706
353
P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:WVC for symphonic EWC.
6
11814
1969
P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 550 mm x 400 mm dia for counter top
6
13608
2268
P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers.
2
2150
1075
P & F Towel Rail or Ring of approved quality/make:
-
-
-
a) C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty).
2
750
375
b) C.P. Brass Towel Ring revolving type
2
370
185
P & F Grating of approved quality/make:
-
-
-
Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make
10
700
70
P & F Extension Pipe for bib cocks of approved quality/make.
-
-
-
a) (-do-) 150 X 15mm.
9
1197
133
P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.
2
532
266
Providing & fixing C.P.flange for 15mm dia taps.
15
180
12
P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore.
6
3216
536
(-do-) Long body, 15mm nominal bore weight not less than 690 gm
4
2848
712
P & F Stop Cock (IS :8931 Mark), superior quality & of approved make:
-
-
-
a) (-do-) Concealed Stop Cock 15mm.
2
1834
917
P&F Ball Cock (IS-1703) with rod & PVC ball complete Brass wt.400 gm,15mm.
3
684
228
P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. with 37 Cm. long pipe and nut.
6
3216
536
P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :
-
-
-
a) Gun-metal 15mm nominal bore.
5
1030
206
b) (-do-) 25mm nominal bore.
4
1924
481
P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1,000 litres capacity.
2
12960
6480
Hoisting charges for each floor
2
220
110
P & F Square-mouth gully trap `A` grade (IS :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type.Trap size 225 X 150 mm, 15 Kg. C.I. cover with frame Internal Chamber size 450 X 450mm.
3
4029
1343
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make
-
-
-
(i) 75 mm dia
20
2420
121
(ii)) 110 mm dia
35
8470
242
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make
-
-
-
a) Coupler
-
-
-
(i) 75mm dia
15
750
50
(ii) 110mm dia
10
750
75
b) Bend 87.5 Dg.
-
-
-
(i) 75mm dia
8
520
65
(ii) 110mm dia
15
1620
108
c) Single 'Y'
-
-
-
(i) 75mm dia
10
1000
100
(ii) 110mm dia
10
1930
193
d) Door Bend 87.5 Dg.
-
-
-
(ii) 110mm dia
8
1072
134
e) Single Tee with Door
-
-
-
(ii) 110mm dia
8
1344
168
f) Single Tee
-
-
-
(i) 75mm dia
5
415
83
(ii) 110mm dia
10
1460
146
g) Nahni Trap without Jali 4”
-
-
-
(ii) 110mm dia
6
630
105
h) Plain floor trap
-
-
-
(ii) 110mm dia
6
966
161
i) Vent Cowel
-
-
-
(ii) 110mm dia
2
82
41
Construction of manhole in all type of soil inner size 90 X 60 Cm. 450 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, 25 k.g C.I. cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M
1
4320
4320
Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 100 mm thick C.C. 1:5:10 in foundation, 20mm thick inside plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. size 450 x 450mm depth upto 0.5 M & 15 k.g. C.I. cover with frame
2
3366
1683
Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia 25 k.g. each Ferro C.I. cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400x140x150cm (for 50users)
1
45067
45067
Construction of Soakage well in all types of soil of approved drawing, top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering, jointing of slab in CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.C flooring, earth work etc . complete including disposal of surplus earth within a lead of 50 mtr . Inner dia 90 Cm & 10 to 12 Mtr deep.
1
3795
3795
Add extra if Soakage Well is filled with dry stones.
15.25
4224
277
P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.
-
-
-
a) 15mm dia nominal bore 'B' Class
35
4795
137
b) 25mm dia nominal bore 'B' Class
45
9000
200
P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors:
-
-
-
Exposed on wall
-
-
-
a) 15 mm dia nominal bore 'B' Class
25
4150
166
b) 25mm dia nominal bore 'B' Class
10
2590
259
Concealed pipe in wall including painting with anticorrosive bitumen paint 15 mm dia nominal bore B class
15
2640
176
Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size :
-
-
-
a) 15mm dia nominal bore
12
1104
92
b) 25mm dia nominal bore
10
1490
149
P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:
-
-
-
C.P. Pillar cock, 15 mm dia nominal bore
6
4248
708
P & F Soap Dish or Tray of approved quality/make CP Brass
6
510
85
Construction of Cement Concrete Chamber 125mm dia on depressed floor upto 45cm height from floor with :
-
-
-
C.P. Brass grating
10
1710
171
Construction of Cement Concrete Chamber 125mm dia.
-
-
-
C.P. Brass grating
10
1210
121
Part C - Electrical work
-
-
-
Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. GP1 ( use semi moduler accessories)
-
-
-
a) Short point (up to 3 mtr.)
25
5375
215
b) Medium point (up to 6 mtr.)
20
6760
338
c) Long point (up to 10 mtr..)
45
21330
474
Wiring of twin control light / fan / call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tles,18 SWG M.S. box with earth terminal, 6 A two way switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. GP1 ( use semi moduler accessories)
-
-
-
a) Long point (up to 10 mtr..)
2
950
475
Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, 6 A switch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. GP1 ( use semi moduler accessories)
-
-
-
a) On board
25
2250
90
b) Short point (up to 3 mtr.)
2
502
251
c) Medium point (up to 6 mtr.)
2
736
368
d) Long point (up to 10 mtr..)
4
1992
498
Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet , making connection , testing , etc. as required. GP1 ( use semi moduler accessories)
20
10760
538
In Item no. E020100, E020200, E020300 The rates are for flush type PC / Urea series accessories , for using semi modular PC / Urea series accessories, rate shall be increased 2 % in point wiring rate ( For item no. 1 to 4 )
-
-
-
S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required.Gr I
-
-
-
a) 20 mm
125
4000
32
b) 25 mm
300
12600
42
c) 32 mm
25
1625
65
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.Gr I
-
-
-
a) 3x 1.5 sq.mm
30
1200
40
b) 2 x 2.5 sq. mm. + 1x1.5sqmm ( All light and power Ckt)
300
15900
53
c) 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. (AC Ckt)
20
1540
77
d) 4 x 6.0 sq.mm (Sub main)
30
5280
176
e) 1 x 4.0 sq.mm (With sub main )
50
1500
30
P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.Gr I
-
-
-
a) Single pole MCB
-
-
-
i) 6 A to 32 A rating
14
2114
151
b) Double pole MCB ( for UPS and AC Point )
-
-
-
i) 6 A to 32 A rating
2
802
401
c) Four pole MCB
-
-
-
i) 40 A 63 A rating
2
2756
1378
d) Triple pole MCB
-
-
-
i) 40 A 63 A rating
2
2068
1034
P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.Gr I
-
-
-
a) Double door (single phase)
-
-
-
i) 4 Way
1
750
750
b) Double door (Three phase)
-
-
-
i) 6 Way
1
2070
2070
P&F recessed/ surface mounting heavy duty Vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCCB and SP / TP MCB as outgoing , phophatised ,powder painted complete with insulated suitable rating copper bus bar , neutral link, earth link and din bar, masking sheet & conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. GP1
-
-
-
a) Double door with Provision of Incomer MCCB 100 / 125 A Rating
-
-
-
i) 6 Way
1
5130
5130
P&F flush/surface type enclosure for housing MCB/Isolator with Din rail including making connections with lugs, repairs etc. as required. GP1
-
-
-
a) With sheet steel enclosure
-
-
-
i) Two way
1
290
290
P & F ISI marked following semi modular accessories with decorative cover plate of approved colours including making connections testing est.' as required GP1
-
-
-
a) RJ-11 telephone jack single two line
3
153
51
b) RJ-45 computer jack with shutter
9
819
91
c) 5 step fan regulator
20
4580
229
d) T.V. socket single outlet
2
56
28
P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required. GP1
-
-
-
a) 1-2 Module
5
200
40
P & F following size mounting grid plates with cover plates GP1
-
-
-
a) 1/2 Module
5
345
69
SITC of quick make and quick break 3 pole current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip , earth fault trip, push ( test ) to trip, including making connections with lugs & spreaders, etc. as required. GP1
-
-
-
a) With Thermal Magnetic release
-
-
-
i) up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu
1
4782
4782
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.Armoured
-
-
-
a) 25.0 Sq.mm
-
-
-
i) 3.5 core ( For main line)
20
4160
208
Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
1
4250
4250
Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.
-
-
-
a) With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating
-
-
-
i) GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip
1
6150
6150
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
-
-
-
a) 25mm x 6mm G.I. ( Hot Dipped ) Strip
15
1650
110
b) 8 SWG G.I. ( Hot Dipped ) Wire
20
180
9
P & F Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.Gr I
-
-
-
a) 1200 mm Sweep 5 Star rated
20
37920
1896
P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .
20
1900
95
P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.Gr I
-
-
-
a) 300 mm sweep
4
7424
1856
P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. GP1
-
-
-
a) 300 mm sweep(900/1400 RPM)
4
12008
3002
P & F of IP 65 protected LED Flood Light Luminaire on existing brackets. Fixtures made of powder coated single piece pressure die cast aluminium housing with heat dissipation fins on housing with UV stabilized PC/Toughened glass cover and lens/reflector. Input power (including driver loss) ranging from 20-25 W/30-40W/80-90W/110-120W with luminous Efficacy 80 Lumen/W (warm white) & 85 Lumens/W (cool white) (As per LM 79). LEDs of Cree/Nichia/Osram/ Philips make is to be used at 1W/2W, CRI 70 and CCT 2700 K - 6500 K. The integral SMPS based electronic driver must have efficiency 85%, Power factor 0.95, THD20% and input Voltage range of 90-270 VAC at 50Hz. System life of 25000 Burning Hours with 70% of initial Lumens maintained. Fixtures must be in compliance with IS/CE Standards. GP1
-
-
-
a) IP - 65 Protected LED Street Light Luminaire
-
-
-
i) LED Street Light fixture 30-40 Watt
2
16000
8000
S & F of Street light bracket made out from following size of ' B ' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.
-
-
-
a) 32 mm Dia.
2
820
410
P & F ISI marked gong bell including making connection testing etc. as required.GP1
2
120
60
P & F ISI marked flush/surface type buzzer including making connection testing etc. as required.GP1
2
100
50
P & F ISI marked single tone electronic call bell including making connection testing etc. as required.GP1
1
225
225
P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required.GP1
1
115
115
P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.GP1
20
360
18
P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required.GP1
20
400
20
CO office at Kumbhalgarh Distt
-
-
-
PART - A : CIVIL WORK
-
-
-
Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils.
209.45
32464
155
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20%
27
5697
211
Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion)
177
7257
41
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
49
140078
2858.75
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
46.2
6329
137
Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand).
186.2
457679
2458
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix
8.8
36185
4112
Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 6 (1 cement : 6 coarse sand)
101.6
429056
4223
Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 4 (1 cement : 4 coarse sand)
51
27183
533
Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.
142
7952
56
Random rubble dry stone Kharanja under floor.
34.49
27833
807
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.
276.69
81623
295
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix.
31.7
142333
4490
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code)
4455
271755
61
Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
14.43
58802
4075
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
54.2
5474
101
Providing and fixing 20 mm thick precast terrazo tiles of approved make, with marble chips of size upto 6mm laid over roof with neat cement slurry mixed with pigment to match the shade of the tiles, including cutting ,grinding rubbing with machine complete on 20 mm thick bed of cement sand mortar 1 : 4.
180
57240
318
Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification :
14
4462
318.75
Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone 25 to 30mm thick.
17
7191
423
Green / Black Above 3601 Cm2 Slabs
8
29640
3705
Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete.
600
36000
60
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 1.00 mm thick with zinc coating not less than 275 gm/m2
50
41100
822
Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%]
30
80280
2676
Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.
30
16050
535
Providing and fixing Square bars or other flat welded to window, ventilatiors etc.
335
19095
57
Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile C
72.75
29536
406
Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide.
200
14200
71
Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension).
5.76
25804
4480
Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
600
49800
83
Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm
138.25
122489
886
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab from 2001 to 5000 Sqcm
21
18228
868
Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).
10.76
7316
680
Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).
54.89
33647
613
Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)
30
9690
323
Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)
30
8880
296
Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm)
8
6560
820
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate
2
2592
1296
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
1
298
298
Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)
6.2
10744
1733
Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge
13.55
45687
3373
Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 35 mm thick . Commercial Veneer both side
23.21
36710
1582
Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13.
23
2806
122
6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)
174
16182
93
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick.
372.42
47669
128
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 12mm thick.
611.85
64856
106
Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design
100
1000
10
Providing and fixing vertical Blinds , headrail shall be oriented aluminum alloy 50 mm vide x 18 mm high the thickness shall be 1.2 mm. Control unit shall be made of high grade polymer and shall be housed in side the headrail, which shall transfer motion from chain tilter to tilt rod. Chain tilter shall be made of plastic bead of diameter 4.5 mm through which 2 mm thick polyester code passes. Tilt rod shall be extruded aluminum having 3 key ways. Runner shall be moulded plastic and shall have to plastic wheels mounted on plastic exles to enable runner to slide unhindered in headrail. Luver shall be made of fabric 100 mm colour fast and shall have protective scotchgard coating to resist stains and dust. Bottom mechanism consist bottom weight made of powder coated galvanized steel for maximum corrosion resistance. The bottom weight shall be attached with bottom.
24.84
36639
1475
Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete
785.85
57367
73
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.
785.85
49508
63
Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat Roller Finish av. thickness 400 to 500 microns.
373
55204
148
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
191.15
10513
55
P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia
27
5076
188
P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87 .5 110mm dia
12
1344
112
Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks:
1) Shape as defined by Engineer incharge
2) Tensile splitting strength and braking load as per BS 6717:2001
3) Color: Grey cement natural colour
4) Variation in dimension: Less than 1.6mm.
5) Variation in thickness: Less than 3.2mm
6) Abrasion: As per BS: 6717:2001
50
22800
456
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand ) including making joints with without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete including painting etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin- charge).
4
21664
5416
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Light shade using shade cement.
19.5
9652
495
PART - B : SANITARY WORK
-
-
-
P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.
2
4134
2067
P & F European type white glazed vitreous china 1st quality W.C. (IS : 2556 Mark) including cutting and making good the wall and floor.
1
1601
1601
P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: WVC for symphonic EWC.
3
5907
1969
P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (small) size456X355X265mm.
2
2664
1332
P & F W.V.C. (IS: 2556 Mark) Squatting Urinal of standard make complete. Including cutting & making good the floor: Size 450x350mm
1
775
775
P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 580 mm x 450 mm
3
6237
2079
P & F water closet Seat Covers with brass hinges complete : -do- White.
1
353
353
P & F Bottle Trap of approved make : C.P Brass 40 mm
2
920
460
P & F Looking Mirrors with P.V.C. frame of approved make as per direction of Engineer-in-charge Size 500x400mm
3
798
266
Construction of Cement Concrete Chamber 125mm dia. Stainless Steel Sheet Grating
8
984
123
P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.
1
266
266
P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: (-do-) Long body, 15mm nominal bore weight not less than 690 gm
5
3560
712
P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 (-do-)
2
6480
3240
P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm.
2
456
228
P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked)
7
3038
434
P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :
-
-
-
a) Gun-metal 15mm nominal bore.
2
412
206
b) Gun-metal 25mm nominal bore.
2
962
481
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make
-
-
-
(i) 75 mm dia
15
1815
121
(ii) 110 mm dia
30
7260
242
a) Plain floor trap
-
-
-
(ii) 110 mm dia
3
483
161
b) Bend 87 .5
-
-
-
(i) 75 mm dia
3
204
68
(ii) 110 mm dia
3
336
112
c) Door Tee
-
-
-
(i) 75 mm dia
2
248
124
(ii) 110 mm dia
2
298
149
d) Vent Cowel
-
-
-
(ii) 110 mm dia
2
78
39
e) P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 45 160 mm dia
4
400
100
Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.5 M
3
12960
4320
P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: Exposed on wall 15 mm dia nominal bore ''B' Class
50
8300
166
P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: 25mm dia nominal bore ''B' Class
15
3885
259
P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. '15mm dia nominal bore 'B' Class
30
4110
137
P & F Towel Rail or Ring of approved quality/make: C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty).
1
375
375
Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 200x100x130 cm.(for 10 users)
1
20570
20570
Construction of Soakage well in all types of soil of approved drawing, top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering, jointing of slab in CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.C flooring, earth work etc . complete including disposal of surplus earth within a lead of 50 mtr . Inner dia 90 Cm & 10 to 12 Mtr deep.
1
3795
3795
PART - C : ELECTRICAL WORK
-
-
-
Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box of 20SWG with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. GP1
-
-
-
Short point (up to 3 mtr.)
9
2340
260
Medium point (up to 6 mtr.)
22
8294
377
Long point (up to 10 mtr..)
36
18288
508
Wiring of twin control light point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tles, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal,6 A two way Modular switch, Modular plate with grid plate, screws, making connections, testing etc. as required. GP1
-
-
-
Long point (up to 10 mtr..)
2
1028
514
Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. GP1
-
-
-
On board
28
6832
244
Short point (up to 3 mtr.)
5
1695
339
Medium point (up to 6 mtr.)
6
2670
445
Long point (up to 10 mtr..)
5
2855
571
Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular box of 20 SWG on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet, making connection, testing, etc. as required. GP1
11
5918
538
S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required.Gr I
-
-
-
20 mm
600
19200
32
25 mm
550
23100
42
32 mm
-
-
-
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.Gr I
-
-
-
3x 1.5 sq.mm
60
2400
40
2 x 2.5 sq. mm. + 1x1.5sqmm ( All light and power Ckt)
600
31800
53
2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. (AC Ckt)
40
3080
77
4 x 6.0 sq.mm (Sub main)
25
4400
176
1 x 4.0 sq.mm (With sub main )
25
750
30
P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.Gr I
-
-
-
Single pole MCB
-
-
-
6 A to 32 A rating
26
3926
151
Double pole MCB ( for UPS and AC Point )
-
-
-
6 A to 32 A rating
4
1604
401
Four pole MCB
-
-
-
40 A 63 A rating
1
1378
1378
P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.Gr I
-
-
-
Double door (single phase)
-
-
-
8 Way
1
897
897
Double door (Three phase)
-
-
-
6 Way
1
2070
2070
P&F flush/surface type enclosure for housing MCB/Isolator with Din rail including making connections with lugs, repairs etc. as required. GP1
-
-
-
With sheet steel enclosure
-
-
-
Two way
-
-
-
P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required
-
-
-
T.V. coaxial socket
2
206
103
5 step fan regulator 2 Module
13
5980
460
Blanking plate
20
380
19
RJ-11 telephone jack single two line
7
602
86
32 Amp. 2 Module switch With Indicator
2
570
285
P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required. GP1
-
-
-
1-2 Module
20
800
40
P & F following size mounting grid plates with cover plates GP1
-
-
-
1/2 Module
20
1380
69
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.Armoured
-
-
-
16.0 Sq.mm
-
-
-
4 core
30
5340
178
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.
-
-
-
4 x 16.0 sq.mm
2
216
108
P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia.
-
-
-
90 / 76 mm
20
3000
150
Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
2
8500
4250
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
-
-
-
8 SWG G.I. ( Hot Dipped ) Wire
20
180
9
P & F Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.Gr I
-
-
-
1200 mm Sweep 5 Star rated
13
24648
1896
P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .
13
1235
95
P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.Gr I
-
-
-
300 mm sweep
1
1856
1856
P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. GP1
-
-
-
300 mm sweep(900/1400 RPM)
2
6004
3002
P & F 9/11/13/ Watt CFL mirror light with CRCA powder coated housing, diffuser, end covers, copper ballast, holder prewired upto terminal block including making connection testing etc. as required(without tube) GP1
-
-
-
Note :- Add extra @10% for fixture with EB
2
1361
680.9
P & F energy efficient / energy saving direct fit (Retrofit) composite self ballasted compact fluorscent lamp (CFL) with PF 0.85 in existing holder / fixture as required. Gp1
-
-
-
11/13 Watt
2
348
174
P & F of IP 65 protected LED Flood Light Luminaire on existing brackets. Fixtures made of powder coated single piece pressure die cast aluminium housing with heat dissipation fins on housing with UV stabilized PC/Toughened glass cover and lens/reflector. Input power (including driver loss) ranging from 20-25 W/30-40W/80-90W/110-120W with luminous Efficacy 80 Lumen/W (warm white) & 85 Lumens/W (cool white) (As per LM 79). LEDs of Cree/Nichia/Osram/ Philips make is to be used at 1W/2W, CRI 70 and CCT 2700 K - 6500 K. The integral SMPS based electronic driver must have efficiency 85%, Power factor 0.95, THD20% and input Voltage range of 90-270 VAC at 50Hz. System life of 25000 Burning Hours with 70% of initial Lumens maintained. Fixtures must be in compliance with IS/CE Standards. GP1 (as per corrigendum issued by Add. CE. Electric PWD for 50% rate)
-
-
-
IP - 65 Protected LED Street Light Luminaire
-
-
-
LED Street Light fixture 30-40 Watt
2
16000
8000
LED Street Light fixture 80-90 Watt
2
23000
11500
S & F of Street light bracket made out from following size of ' B ' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.
-
-
-
25 mm Dia.
4
880
220
SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. GP1
-
-
-
Self priming pumps
-
-
-
0.5 HP, 1-Ø, (6-28)Mtr, (52-12)LPM
1
3538
3538
P & F of 4 star rated vertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P./ Flexible alloy connection,testing etc. as required.GP1
-
-
-
15 Ltr.
-
-
-
P & F ISI marked single tone electronic call bell including making connection testing etc. as required. GP1
2
450
225
P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required.GP1
2
230
115
P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.GP1
22
396
18
P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required.GP1
13
260
20
Supplying and drawing PVC jacketed with annealed bare copper inner conductor & tinned copper conductor shielding foam PE dielectric coaxial cable of approved make in existing surface or recessed conduit/casing capping including making connections as required.
-
-
-
RG - 6
25
575
23
P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required. GP1
-
-
-
Four pole Isolator
-
-
-
63 A rating
1
631
631
P & F of capacitor start, metal body, metal blade three speed wall mounting fan of following sweep with the help of anchor bolts including making connection testing etc. as required.
Note : deduct 10% for plastic body/blade wall mounting fans. GP1
-
-
-
400 mm sweep(Oscillating type)
1
2649
2649
P&F 240/415 V Residual current circuit breaker conforming to IS:12640:1988/ IEC 61008 on existing board/sheet including making connections, testing etc. as required
-
-
-
Four pole 100/300 mA sensitivity
-
-
-
63 A rating
1
2413
2413
Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required. GP 1
300
10800
36
Supply and Installation of Information outlets made of high impact plastic body ABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Cat 6 application complying to latest ammendments EIA/ TIA 568 B.2-1 Specifications in existing modular /MS Boxes along with necessory connections as required GP 1
14
5320
380
Supply & fixing of Faceplate for Flush / Surface Mount Information Outlets Single Aperture with screw hole covers & Icon Tree Size 86mmX86mm GP 1
-
-
-
Single Aperture
14
1377
98.4
Supply , Installation, Testing and Comissioning of Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, one Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable GP 1
-
-
-
9 U(44 mm ) wall mounted
1
10500
10500
Supply & Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity.GP1
-
-
-
6 kg
4
21800
5450
NON BSR ITEMS
-
-
-
P & F of IP20 LED batten type light fixture made from Epoxy powder coated white extruded aluminium chanel included with Polycarbonate LED tuberod (integral driver), Power Consumption of 18W ,1800 lumens, system lumen efficiency minimun of 100 lm/Watt output,system life of 40,000 burning hours with 70% initial lumen maintained. CCT 3000°K.. of following make and model PHILIPS , Trilux , Wipro, Havells
-
-
-
4' LED Tube shape fixture 18W 2000 lm
13
17849
1373
SITC of IP20 LED surface mounted Round Downlight with slim design, Polycarbonate reflector and integrated driver having THD10% and in compliance to IEC standards. Minimum System Lumen output of 1500-2000 with maximum system power of 15 wt , System Lumen efficacy of 140 lm/Watt, system life of 40000 Burning Hours with 70% of intial Lumen maintaned. CCT of 3000°K and a minimum CRI of more or equal 80. Fixture shall be CE compliance, LED Luminaire, LED chip ,heat sink and driver should be of same make to ensure system reliability.Make PHILIPS , Trilux , Wipro, Havells
-
-
-
LED Downlight surface 15 W
16
24240
1515
Supply and fixing of LED Buld 9 watt capacity in PVC module of following makes:- CG, Philips, Wipro , Syska, Havells or any equivellent make after prior approval of Engineer-in-charge
13
2769
213
Addl. SP office Sahada (Gangapur)
-
-
-
PART - A : CIVIL WORK
-
-
-
Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils.
209.45
32464
155
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20%
27
5697
211
Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion)
177
7257
41
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
49
140078
2858.75
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
46.2
6329
137
Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand).
186.2
457679
2458
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix
8.8
36185
4112
Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 6 (1 cement : 6 coarse sand)
101.6
429056
4223
Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 4 (1 cement : 4 coarse sand)
51
27183
533
Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.
142
7952
56
Random rubble dry stone Kharanja under floor.
34.49
27833
807
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.
276.69
81623
295
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix.
31.7
142333
4490
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code)
4455
271755
61
Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
14.43
58802
4075
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
54.2
5474
101
Providing and fixing 20 mm thick precast terrazo tiles of approved make, with marble chips of size upto 6mm laid over roof with neat cement slurry mixed with pigment to match the shade of the tiles, including cutting ,grinding rubbing with machine complete on 20 mm thick bed of cement sand mortar 1 : 4.
180
57240
318
Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification :
14
4462
318.75
Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone 25 to 30mm thick.
17
7191
423
Green / Black Above 3601 Cm2 Slabs
8
29640
3705
Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete.
600
36000
60
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 1.00 mm thick with zinc coating not less than 275 gm/m2
50
41100
822
Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%]
30
80280
2676
Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.
30
16050
535
Providing and fixing Square bars or other flat welded to window, ventilatiors etc.
335
19095
57
Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile C
72.75
29536
406
Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide.
200
14200
71
Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension).
5.76
25804
4480
Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
600
49800
83
Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm
138.25
122489
886
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab from 2001 to 5000 Sqcm
21
18228
868
Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).
10.76
7316
680
Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).
54.89
33647
613
Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)
30
9690
323
Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)
30
8880
296
Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm)
8
6560
820
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate
2
2592
1296
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
1
298
298
Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)
6.2
10744
1733
Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge
13.55
45687
3373
Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 35 mm thick . Commercial Veneer both side
23.21
36710
1582
Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13.
23
2806
122
6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)
174
16182
93
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick.
372.42
47669
128
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 12mm thick.
611.85
64856
106
Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design
100
1000
10
Providing and fixing vertical Blinds , headrail shall be oriented aluminum alloy 50 mm vide x 18 mm high the thickness shall be 1.2 mm. Control unit shall be made of high grade polymer and shall be housed in side the headrail, which shall transfer motion from chain tilter to tilt rod. Chain tilter shall be made of plastic bead of diameter 4.5 mm through which 2 mm thick polyester code passes. Tilt rod shall be extruded aluminum having 3 key ways. Runner shall be moulded plastic and shall have to plastic wheels mounted on plastic exles to enable runner to slide unhindered in headrail. Luver shall be made of fabric 100 mm colour fast and shall have protective scotchgard coating to resist stains and dust. Bottom mechanism consist bottom weight made of powder coated galvanized steel for maximum corrosion resistance. The bottom weight shall be attached with bottom.
24.84
36639
1475
Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete
785.85
57367
73
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.
785.85
49508
63
SITC of IP20 LED surface mounted Round Downlight with slim design, Polycarbonate reflector and integrated driver having THD10% and in compliance to IEC standards. Minimum System Lumen output of 1500-2000 with maximum system power of 15 wt , System Lumen efficacy of 140 lm/Watt, system life of 40000 Burning Hours with 70% of intial Lumen maintaned. CCT of 3000°K and a minimum CRI of more or equal 80. Fixture shall be CE compliance, LED Luminaire, LED chip ,heat sink and driver should be of same make to ensure system reliability.Make PHILIPS , Trilux , Wipro, Havells
-
-
-
Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat Roller Finish av. thickness 400 to 500 microns.
373
55204
148
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
191.15
10513
55
P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia
27
5076
188
P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87 .5 110mm dia
12
1344
112
Providing and fixing of precast concrete interlocking blocks of M 30 grade 60mm thick manufactured from fully computerised automatic stationery hydraullic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes. General specification of blocks:
1) Shape as defined by Engineer incharge
2) Tensile splitting strength and braking load as per BS 6717:2001
3) Color: Grey cement natural colour
4) Variation in dimension: Less than 1.6mm.
5) Variation in thickness: Less than 3.2mm
6) Abrasion: As per BS: 6717:2001
50
22800
456
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand ) including making joints with without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete including painting etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin- charge).
4
21664
5416
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Light shade using shade cement.
19.5
9652
495
PART - B : SANITARY WORK
-
-
-
P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.
2
4134
2067
P & F European type white glazed vitreous china 1st quality W.C. (IS : 2556 Mark) including cutting and making good the wall and floor.
1
1601
1601
P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: WVC for symphonic EWC.
3
5907
1969
P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (small) size456X355X265mm.
2
2664
1332
P & F W.V.C. (IS: 2556 Mark) Squatting Urinal of standard make complete. Including cutting & making good the floor: Size 450x350mm
1
775
775
P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 580 mm x 450 mm
3
6237
2079
P & F water closet Seat Covers with brass hinges complete : -do- White.
1
353
353
P & F Bottle Trap of approved make : C.P Brass 40 mm
2
920
460
P & F Looking Mirrors with P.V.C. frame of approved make as per direction of Engineer-in-charge Size 500x400mm
3
798
266
Construction of Cement Concrete Chamber 125mm dia. Stainless Steel Sheet Grating
8
984
123
P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.
1
266
266
P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: (-do-) Long body, 15mm nominal bore weight not less than 690 gm
5
3560
712
P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 (-do-)
2
6480
3240
P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm.
2
456
228
P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked)
7
3038
434
P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :
-
-
-
a) Gun-metal 15mm nominal bore.
2
412
206
b) Gun-metal 25mm nominal bore.
2
962
481
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make
-
-
-
a) 75 mm dia
15
1815
121
b) 110 mm dia
30
7260
242
c) Plain floor trap
-
-
-
(i)110mm dia
3
483
161
d) Bend 87 .5
-
-
-
(i)75mm dia
3
204
68
(ii) 110mm dia
3
336
112
e) Door Tee
-
-
-
(i)75mm dia
2
248
124
(ii) 110mm dia
2
298
149
f) Vent Cowel
-
-
-
(i) 110mm dia
2
78
39
P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 45 160 mm dia
4
400
100
Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.5 M
3
12960
4320
P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: Exposed on wall 15 mm dia nominal bore ''B' Class
50
8300
166
P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: 25mm dia nominal bore ''B' Class
15
3885
259
P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. '15mm dia nominal bore 'B' Class
30
4110
137
P & F Towel Rail or Ring of approved quality/make: C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty).
1
375
375
Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 200x100x130 cm.(for 10 users)
1
20570
20570
Construction of Soakage well in all types of soil of approved drawing, top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering, jointing of slab in CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.C flooring, earth work etc . complete including disposal of surplus earth within a lead of 50 mtr . Inner dia 90 Cm & 10 to 12 Mtr deep.
1
3795
3795
PART - C : ELECTRICAL WORK
-
-
-
Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box of 20SWG with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. GP1
-
-
-
Short point (up to 3 mtr.)
9
2340
260
Medium point (up to 6 mtr.)
22
8294
377
Long point (up to 10 mtr..)
36
18288
508
Wiring of twin control light point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tles, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal,6 A two way Modular switch, Modular plate with grid plate, screws, making connections, testing etc. as required. GP1
-
-
-
Long point (up to 10 mtr..)
2
1028
514
Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. GP1
-
-
-
On board
28
6832
244
Short point (up to 3 mtr.)
5
1695
339
Medium point (up to 6 mtr.)
6
2670
445
Long point (up to 10 mtr..)
5
2855
571
Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular box of 20 SWG on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet, making connection, testing, etc. as required. GP1
11
5918
538
S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required.Gr I
-
-
-
20 mm
600
19200
32
25 mm
550
23100
42
32 mm
-
-
-
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.Gr I
-
-
-
3x 1.5 sq.mm
60
2400
40
2 x 2.5 sq. mm. + 1x1.5sqmm ( All light and power Ckt)
600
31800
53
2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. (AC Ckt)
40
3080
77
4 x 6.0 sq.mm (Sub main)
25
4400
176
1 x 4.0 sq.mm (With sub main )
25
750
30
P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.Gr I
-
-
-
Single pole MCB
-
-
-
6 A to 32 A rating
26
3926
151
Double pole MCB ( for UPS and AC Point )
-
-
-
6 A to 32 A rating
4
1604
401
Four pole MCB
-
-
-
40 A 63 A rating
1
1378
1378
P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.Gr I
-
-
-
Double door (single phase)
-
-
-
8 Way
1
897
897
Double door (Three phase)
-
-
-
6 Way
1
2070
2070
P&F flush/surface type enclosure for housing MCB/Isolator with Din rail including making connections with lugs, repairs etc. as required. GP1
-
-
-
With sheet steel enclosure
-
-
-
Two way
-
-
-
P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required
-
-
-
T.V. coaxial socket
2
206
103
5 step fan regulator 2 Module
13
5980
460
Blanking plate
20
380
19
RJ-11 telephone jack single two line
7
602
86
32 Amp. 2 Module switch With Indicator
2
570
285
P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required. GP1
-
-
-
1-2 Module
20
800
40
P & F following size mounting grid plates with cover plates GP1
-
-
-
1/2 Module
20
1380
69
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.Armoured
-
-
-
16.0 Sq.mm
-
-
-
4 core
30
5340
178
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.
-
-
-
4 x 16.0 sq.mm
2
216
108
P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia.
-
-
-
90 / 76 mm
20
3000
150
Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
2
8500
4250
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
-
-
-
8 SWG G.I. ( Hot Dipped ) Wire
20
180
9
P & F Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.Gr I
-
-
-
1200 mm Sweep 5 Star rated
13
24648
1896
P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .
13
1235
95
P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.Gr I
-
-
-
300 mm sweep
1
1856
1856
P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. GP1
-
-
-
300 mm sweep(900/1400 RPM)
2
6004
3002
P & F 9/11/13/ Watt CFL mirror light with CRCA powder coated housing, diffuser, end covers, copper ballast, holder prewired upto terminal block including making connection testing etc. as required(without tube) GP1
-
-
-
Note :- Add extra @10% for fixture with EB
2
1361
680.9
P & F energy efficient / energy saving direct fit (Retrofit) composite self ballasted compact fluorscent lamp (CFL) with PF 0.85 in existing holder / fixture as required. Gp1
-
-
-
11/13 Watt
2
348
174
P & F of IP 65 protected LED Flood Light Luminaire on existing brackets. Fixtures made of powder coated single piece pressure die cast aluminium housing with heat dissipation fins on housing with UV stabilized PC/Toughened glass cover and lens/reflector. Input power (including driver loss) ranging from 20-25 W/30-40W/80-90W/110-120W with luminous Efficacy 80 Lumen/W (warm white) & 85 Lumens/W (cool white) (As per LM 79). LEDs of Cree/Nichia/Osram/ Philips make is to be used at 1W/2W, CRI 70 and CCT 2700 K - 6500 K. The integral SMPS based electronic driver must have efficiency 85%, Power factor 0.95, THD20% and input Voltage range of 90-270 VAC at 50Hz. System life of 25000 Burning Hours with 70% of initial Lumens maintained. Fixtures must be in compliance with IS/CE Standards. GP1 (as per corrigendum issued by Add. CE. Electric PWD for 50% rate)
-
-
-
IP - 65 Protected LED Street Light Luminaire
-
-
-
LED Street Light fixture 30-40 Watt
2
16000
8000
LED Street Light fixture 80-90 Watt
2
23000
11500
S & F of Street light bracket made out from following size of ' B ' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.
-
-
-
25 mm Dia.
4
880
220
SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. GP1
-
-
-
Self priming pumps
-
-
-
0.5 HP, 1-Ø, (6-28)Mtr, (52-12)LPM
1
3538
3538
P & F of 4 star rated vertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P./ Flexible alloy connection,testing etc. as required.GP1
-
-
-
15 Ltr.
-
-
-
P & F ISI marked single tone electronic call bell including making connection testing etc. as required. GP1
2
450
225
P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required.GP1
2
230
115
P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.GP1
22
396
18
P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required.GP1
13
260
20
Supplying and drawing PVC jacketed with annealed bare copper inner conductor & tinned copper conductor shielding foam PE dielectric coaxial cable of approved make in existing surface or recessed conduit/casing capping including making connections as required.
-
-
-
RG - 6
25
575
23
P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required. GP1
-
-
-
Four pole Isolator
-
-
-
63 A rating
1
631
631
P & F of capacitor start, metal body, metal blade three speed wall mounting fan of following sweep with the help of anchor bolts including making connection testing etc. as required.
Note : deduct 10% for plastic body/blade wall mounting fans. GP1
-
-
-
400 mm sweep(Oscillating type)
1
2649
2649
P&F 240/415 V Residual current circuit breaker conforming to IS:12640:1988/ IEC 61008 on existing board/sheet including making connections, testing etc. as required
-
-
-
Four pole 100/300 mA sensitivity
-
-
-
63 A rating
1
2413
2413
Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required. GP 1
300
10800
36
Supply and Installation of Information outlets made of high impact plastic body ABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Cat 6 application complying to latest ammendments EIA/ TIA 568 B.2-1 Specifications in existing modular /MS Boxes along with necessory connections as required GP 1
14
5320
380
Supply & fixing of Faceplate for Flush / Surface Mount Information Outlets Single Aperture with screw hole covers & Icon Tree Size 86mmX86mm GP 1
-
-
-
Single Aperture
14
1377
98.4
Supply , Installation, Testing and Comissioning of Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, one Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable GP 1
-
-
-
9 U(44 mm ) wall mounted
1
10500
10500
Supply & Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity.GP1
-
-
-
6 kg
4
21800
5450
NON BSR ITEMS
-
-
-
P & F of IP20 LED batten type light fixture made from Epoxy powder coated white extruded aluminium chanel included with Polycarbonate LED tuberod (integral driver), Power Consumption of 18W ,1800 lumens, system lumen efficiency minimun of 100 lm/Watt output,system life of 40,000 burning hours with 70% initial lumen maintained. CCT 3000°K.. of following make and model PHILIPS , Trilux , Wipro, Havells
-
-
-
4' LED Tube shape fixture 18W 2000 lm
13
17849
1373
SITC of IP20 LED surface mounted Round Downlight with slim design, Polycarbonate reflector and integrated driver having THD10% and in compliance to IEC standards. Minimum System Lumen output of 1500-2000 with maximum system power of 15 wt , System Lumen efficacy of 140 lm/Watt, system life of 40000 Burning Hours with 70% of intial Lumen maintaned. CCT of 3000°K and a minimum CRI of more or equal 80. Fixture shall be CE compliance, LED Luminaire, LED chip ,heat sink and driver should be of same make to ensure system reliability.Make PHILIPS , Trilux , Wipro, Havells
-
-
-
LED Downlight surface 15 W
16
24240
1515
Supply and fixing of LED Buld 9 watt capacity in PVC module of following makes:- CG, Philips, Wipro , Syska, Havells or any equivellent make after prior approval of Engineer-in-charge
13
2769
213
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements