Rajasthan Housing Board Tender

Rain water chamber 750 x 600 mm

Construction of chamber in all type of soil 230 mm thick mansory in CM 1 : 4, 15 Cm thick CC 1 : 3 : 6 in foundation 20 mm thick inside outside plaster with 1:4 cement motor fininh with floating neat cement, 100 mm thick and M-15 grade CC flooring, earth work etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. (As per Drawing). Inside size 800 x 900 mm depth of 0.90 mtr. to 1.20 mtr. cement cover with frame.

Construction of chamber in all type of soil 230 mm thick mansory in CM 1 : 4, 15 Cm thick CC 1 : 3 : 6 in foundation 20 mm thick inside outside plaster with 1:4 cement motor fininh with floating neat cement, 100 mm thick and M-15 grade CC flooring, earth work etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. (As per Drawing). Inside size 900 x 1200 mm depth of 0.90 mtr. to 1.20 mtr. cement cover with frame.

Supply, Erection, testing and commissioning of suitable size made out of 18 gause painted sheet canopy type out door LT panel board, (PMCC) conforming SLD and specification suitable for upto 10 HP submersible motor pump having following Items. Space for three phase electric meter with backalight sheet 6 mm thick, kit-kit fuse 32Amp.- 3 no., MCB 32Amp. 4 pole, Selector switch, Indicator lamp RYB, Amper mtr. (0-30) 100 mm size, volt meter ( 0-500) 100 mm size, Single phase preventer, Star-delta starter connection plat (63 Amp.), capacitor 4 KVAR etc. Make L&T complete including grouting the panel on MS angle frame above 60 cm height from ground level, construction suitable size RR stone masonry in (Cement motor 1:6) block on top of block CC 1:2:4 15cm thick for grouting the panel board (enclosed)

Construction of RCC Clear Water Reservoirs of required capacity including excavating in all types of strat, foundation concrete, container walls, bottom slab tap roof slab and fod grade epoxy paint to inner face of the container and slab, including refilling and disposing of surplus stuff, all labour and material charges, providing and fixing accessories such as M.S. / Alluminium ladder/RCC stairs inside and outside, manhole frame and cover, puddle collar, ventilators, satisfactory hydraulic test and water tightnesstest as per IS code and providing three coats of cement paints on all exposed surface of structure etc, complete in all respect as per design data, criteria, obligatory requirements and detailed speciications, scope of work and GA drawing. The job inlcude painting the name of the scheme and other details on the reservoir and any other work related to structure as per the directions of Engineer-in-charge, Technical Specifications and Scope of work., RCC Rectangular flat slab CWR, SBC 10T/sqm, seismic zone-II

200 KL

600 KL

Construction of Pump house of required size suitable for installation of maximum 4 no. monoblock pump sets as per approved GA drawing, scope of work and technical specification complete work in all respect.

Providing, installation, testing and commissioning of submersible dewatering pump set conforming to relevant IS codes and as per scope of work and Technical Specifications, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft, impeller, pump and motor body. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard.The pump set shall be suitable for direct coupling, with suitable suction strainer etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions of one of the makes approved by Technical Committee

1.0 HP

Construction of RR stone masonry sluice valve chambers of following size wall thickness 45CM bed concrete M-15 grade 15 CM, 25 CM thick internal & outer planter ferrow cement cover "AA" class loading. Internal size 1.20 x 1.50 Mtr.

Constructing providing and fixing of pre-cast RCC M-40 grade circular Road Side Inspection Chamber including earthwork using sulphate resistant cement with following dia and depth cylindrical piece with 100mm wall thickness, 100mm base slab, inbuilt cover & frame on top, provision for 110mm OD in and out sewer connection with making proper in built benching and channel with PCC M-15 grade including providing cast-in-situ 100mm thick foundation of PCC M-10 grade, supplying and fixing circular precast SFRC Circular 300 mm dia manhole cover with frame - M.D. - 10, including steel reinforcement minimum @ 80kg/cum, testing for water tightness complete in all respect as per drawing, specification and the direction of the Engineer. Pre-cast Road side inspection chamber of 450mm dia (internal), 600mm depth and 750mm dia base foundation

Supply,Testing, commissioning of Hydropneumatic Pressure Boosting System consisting of 3 Nos. Vertical Inline Multistage centrifugal pumps with TEFC IE2 class motor, Pump connected in Parallel mounted on a common MS ISMC type base frame with Suction & Discharge manifolds of Galvanised MS Pipe, One No. NRV & Two Isolating Valves for each pump, Pressure Gauge, Pressue Transmitter & minimum IP54 type Panel. The Panel shall include all required fuses, motor protection, main switch, 3 Nos. VFDs, KIRLOSMART (iOT Remote Monitoring System, IP20,) BMS Connectivity through RS485 PORT, all automation operations etc. complete in all respect & 1-Nos 200 Ltrs MS 10 bar Pressure Tank. This work including Pressure transmitter, flow meter, NRV on discharge line as per required line size and Butterfly valve, Y-Strainer on suction line and all accessories for pump and system safe operation complete job as per direction engineer in charge

For OHT FILLING (LIG & EWS)

The Technical details of the system are as under :

PUMPS - 3 Nos. (3W+ 1S)

Head pump - 75-85 Mtrs.

Flow each pump - 25-30 M3/Hr.

VDF make - Danfoss/VACON - 4 nos.

Impeller : SS 304

Shaft : SS 316

Casing ; SS 304

CI Suction-dischage port of pump

Makes: Kirloskar, Grundfos, Armstrong.

Solenoid Valve with 12V, DC Operated control Panel and float switch

Size - 50mm

MOC - SS 304

Valve Body - CF8M

Make :- U-Flow, Danfoss

Provision for O&M of scheme including T&P, reparing of pipe line with material and reparing of motor pump, complete in all respect for one year