Rajasthan Housing Board Tender

Providing and fixing 40 mm thick Rajasthan Black Granite stone gangsaw cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete

Providing and fixing of Brick Tile for Cladding in position as per approved design and drawing in cement mortar 1:4 including making smooth surface dressed fixing and jointing / pointing with cement mortar 1:4 using pigment as per drawing and instruction of engineer incharge complete in all respect.

Providing and fixing 30 mm thick Tiger Red Granite stone slab shot blasted leather finished flammed brushed and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete

Providing and fixing of Italia Piccolo Mosaic tile of size 2" x 2" of crackle effect , blue colour with adhesive complete as per manufactures specifications and direction of ei

Providing and fixing S.S. Edging , complete in all respect as per design & as directed by Engineer In charge.

Providing and fixing Lacquered glass of any shade , complete in all respect as per design & as directed by Engineer In charge.

Providing and Fixing "Saucer Drain " sawn finished 75 mm thick made of granite having width 300 mm with cement sand mortar 1:3 (1 cement : 3 Course Sand ) Compute in all respect as directed by engineer incharge.

Providing and laying Single component crack bridging high elongation Polyurethane (PU) waterproofing coating, after the surface should be properly prepared and devoid of any impurities. (To prepare the surface wire brush, hair brush, hammers and blower machine will be used) The surface should be pre-wetted and no dry areas lefts. Treat all the joints and corners by making gola with cement1: 3 sand: SBR with water. Pack all drain holes. Any cracks on surface will cut in V shape grove and filled with SBR, up to 10 mm in depth and 10-20 mm in width. Cleaning of surface and make it dusts free and then Apply 1st primer coat of or MYK Arment SBR 35. Apply 3rd, 4th and 5th coat of PU primer coat of MYK Arment and allow it to dry for at least 5 hours. Pond tests the surface for 72 hours. All complete with standard specification and under Engineer in charge

Providing and laying in position ready mixed plain cement concrete low density cement concrete fill (LDCCF), with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying site of and curing, excluding the cost of centring, shuttering and finishing, including cost of curing. Admixtures in recommended proportions as per 15: 9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-Charge, concrete M-3 GRADE Light weight concrete, density 750-800 kg/m3 Nate: Light weight concrete manufacture should be only cement manufacturer company only such as LAFARGE, ULATRA TECH, J.K.

Providing and Fixing 2.25 mtr x 0.75 mtr wide Bench with Back Rest with water proof wooden plank, fixed on Base material SS304 square tube as per drawing & design complete in all respect as per Directed by Engineer in charge

Providing and fixing of Textured Design porcelain Tile of size 24" x 24" with adhesive complete as per manufactures specifications and direction of EI 10 mm thick

Providing and fixing of Hexagonal Mosaic Tile of size 12" x 12" with adhesive complete as per manufactures specifications and direction of EI 18-20 mm thick

Providing and fixing of Hexagonal Mosaic Tile Contrast Colour of size 12" x 12" with adhesive complete as per manufactures specifications and direction of EI 18-20 mm thick

Providing and fixing of Italian Mosaic Tile ( Dark )Swan finish of approved size with adhesive complete as per manufactures specifications and direction of EI 18-20 mm thick

Providing and fixing of Italian Mosaic Tile ( Light )Swan finish of approved size with adhesive complete as per manufactures specifications and direction of EI 18-20 mm thick

Providing and Fixing 12mm thick. Clear toughened glass with accessories, complete in all respect as per direction of Engineer-In-Charge.

Providing and Fixing 12mm thick. Curved Shape toughened glass with accessories, complete in all respect as per direction of Engineer-In-Charge.

Providing and Fixing Fire Doors as per general specification and complete in all respect as per direction of Engineer-In-Charge. MS Double leaf door colour coated 46 mm thickness.

Providing and Fixing Aluminium louvers with required accessories, complete in all respect as per direction of Engineer-In-Charge. 18-20 mm thick

Providing and Fixing Aluminium partitions with app sheet and required accessories, complete in all respect as per direction of Engineer-In-Charge. 18-20 mm thick

Providing and Fixing Curved Shape Aluminium windows with required accessories, complete in all respect as per direction of Engineer-In-Charge. 18-20 mm thick

Providing, applying and fixing of 20mm thk. Satvario marble or equivalent selected Italian marble in alcove walls and main fountain spill edge details with curver surface application also, complete in all sense with full or half round moulding or L- groove detailing, cutting, pasting & laying with adhesive , mastic filling and complete polishing + light cutting work, complete in all respect as per direction of Engineer-In-Charge.

Providing and Fixing 12mm thick. Corian Water Counter with required adhesive, complete in all respect as per direction of Engineer-In-Charge.

Providing and Fixing Aluminum Door With 6mm. Toughened Glass with accessories, complete in all respect as per direction of Engineer-In-Charge.

Providing and Fixing Aluminum Door with APP Sheet and required accessories, complete in all respect as per direction of Engineer-In-Charge.

Providing ,Making and Fixing Stone Inlay of size 3.60 x 3.60 mtr in combination of Italian Marble / White marble/ Jaisalmer Yellow/ polished mandana / Beigh Stone as per design and direction of Engineer Incharge.

Providing & fixing "ornamental stone cladding" of approved sand stone with dressing complete as per existing design/pattern/approved design,fixing with 30mm thickgrinded lime surkhi mortar 1:2 & pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge.(75mm thick)

Providing and applying breathable, non-reactive, transparent, antifungal, UV resistant, alkaline stable, impregnable silane-siloxane or equivalent based water repellent coating on exposed absorbing substrate like stone surface in two or more coats to give uniform finish surface in all heights, horizontal, inclined, vertical and on ceiling complete in all respect and making it complete water-proof as per direction of the Engineer-in charge.

Providing, drilling, hole cleaning & fixing ETA-approved A4 stainless steel Hilti HSU-R stone undercut anchor having CABR seismic 1:1 report. The required HSU ADT/MDT portable drilling machine, HSU CDB drill bit, and HSU IG check gauge to create the right undercut should strictly be adhered to as per manufacturer’s recommendation (To create right diameter, depth and undercut in stone). Multiple pull-out tests must be conducted on installed HSU-R anchor (on stone panel) to determine anchor’s resistance, following which the required number of anchors per stone panel must be calculated. Design of stone undercut anchor must be submitted to consultant before execution. The HSU ST-G setting tool must be used to set the anchor. A suitable Aluminium/MS frame shall be manufactured and fixed to concrete using stainless steel Hilti HST3-R M10×90mm stud anchor (Depth & dia shall be decided based on the load requirement). Both anchors, HST3 and HSU-R must have a red embedment mark to verify correct installation. The entire application shall be done as per the manufacturer’s specifications.

Providing and installation Water Chiller unit of make SKODA and equivalent with 500 ltr tank capacity and 400-500 LPH Cooling Capacity, complete in all respect as per standard specification.

Providing and installation R.O. Plant of make Innoteck/Lubi of 1 HP Power and capacity of discharge 2 cum per Hour including multi-grade media filter, activated carbon filter and micron filter as per standard specification including High pressure pump of 2 HP, R.O. Stream and interconnecting pipe etc. complete and required instruments like ROTA Meter, Pressure gauge , labour controller, UV Disinfection System, with electronic control panel, complete in all respect as per standard specification, running and maintenance up to 1 Year.

Equipment of Water Feature for English Fountain as follows

V900 – “V” Series Bobbin Wound polyster Fibreglass Top Mount Sand Filter – Model No :- V 900 Velocity : 30 KLPH (30 m3 / hr) Dia : 900 MM Presure : 2.5 kg/cm2 WMPT Series Multiport Valve: 6 Way Top Mount Multiport Valve 2” Make: Emaux

WFM Series Graded Filter Media: Size : 4-8 MM 8-10 MM 10-12 MM

SPH Series Centrifugal Pump: Single Phase ABS PVC Impeller Inbuilt Prefilter Stainer SPH –3.0 (3.0 HP-CP/30KLPH) Make: Apsilon 01 – Working 01 - Standby

WEB Series ABS Eye Bull Nozzle Make: Emaux

WEB Series ABS Vacuum Nozzle Make: Emaux

WFN Series - Nozzle Type :- Geyser / Foam Nozzle Size:- 1” Material :- Steeliness Steel

WLED Series Led Light WARM WHITE NOZZLE RING LED WLED-012 (12W-12V) Type :- Ring led / Grade – IP68 Material :- Stainless Steel Body

WLED Series Led Light & Highlighter WLED-024 (24W-12V) Grade – IP68 / WARM LIGHT Material :- Stainless Steel Body Wall surface mount – 32 for water tab RGB Highlighter with stand – 30 for Gi Ring (10 upper Ring & 20 Lower Ring)

WLT Series LED Light Transformers: WLT-024 (24W-12V)

GI RING & Pencile Nozzle - UPPER Ring dia size – 5’-0” Pipe Size – 2” Nozzle – 20 Pencil Nozzle

GI RING & Pencile Nozzle - LOWER Ring dia size – 14’-0” Pipe Size – 2” Nozzle – 54 Pencil Nozzle

WMP Series Monoblock Pump: for Feature Nozzle Kirloskar (Three Phase) WMP –12.50 (12.5 HP-SP/ 130KLPH)100*100 Brand :- Kirloskar

WMP Series Monoblock Pump: for Feature Nozzle Kirloskar (Three Phase) WMP –10.00 (10.0 HP-SP/ 100KLPH)100*100

WMP Series Monoblock Pump: for Feature Nozzle Kirloskar (Three Phase) WMP –5.00 (5.0 HP-SP/ 48KLPH) 80*65 Brand :- Kirloskar

WMS Series ABS Main Drain Square (12”×12”)