Rajasthan Housing Board Tender

Decorative LED Drop down Fixture : Ornamental 90 Watt Led Drop down Fixture made of aluminium body duly powder coated/PU painted with PC/PMMA clear diffuser for high illuminance MCPCB having high lumen leds are directly mounted on heat sinks. Fixture Screen impact resistance IK 06, Polyester powder coated, IP Rating IP-66, Height- 630mm, width- 625mm. Energy efficient driver having THD- 10% , PF- 0.95 with external 10kV SPD is provided . Fixture is duly wired and complete in all aspects for suspension on Decorative arm of bracket.

Coralume Orna Furrow Florian Lighting Pole, Ht.5000: Supply of 5000mm SCoralume Orna Florian pole made of circular mild steel pipe of two section (grade YST 210), Bottom section MS Plain pipe 139.7mm Dia x 3.6mm thick with 1200mm Height & Top section MS Fluted pipe 88.9mm Dia x 2.9mm thick with 2573mm Height . Decorative base made of Gravity Die-cast aluminium (436mm Dia x 480mm Height). Decorative Die-cast Aluminium cone (169mm Dia x 90mm Height) coverd on the both section joint area. The single arm coralume orna bracket is a split constructed type, Bracket stem made of MS Pipe 76.1mm Dia x 2.6mm thick, emerging from a Gravity Die-cast Aluminium embellishment upto a length of 765mm crowned at top with a gravity die-cast aluminium decorative tomb of 202mm height. The artistically curved single arm made of MS Pipe 50.8mm Dia x 2.3mm thick, spruced up with MS Scroll with leafy embellishment at center, is firmly held to the stem through welded rectangle pipe bearing the arm with spherically formed tip at the open ends and the other end facilitates the fitment of luminaire at 670mm from the vertical axis of the bracket stem.

Wind 3 speed considered in design 50 m/sec in compliance with IS 875 Part 3 : 1987. Pole section welded by certified welders using high end MIG welding processes. PDC aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope with IP protection rating.The control gear tray is prewired with 2.5 Sq.mm cable,6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 250mm Square x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M16 x 500mm bolts of grade 4.6 at CC180. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation.All dimension and weight are within +/- 5% tolerance. The pole is coated with pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options

Dynasty, Dimension : 445 x 741, Wattage : 50W LED. : Dynasty ID : 4640 LED 3000K, 4000K, 6500K 240Vac CRI 80 MacAdam step 3 Input power : 50W Dimension : ?445 x 741 mm Light Distribution 360° Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Light Column. IP rating IP65 MATERIAL CHARACTERISTICS Die cast aluminium top cover ?445 mm, die cast aluminium decorative knob on top, Gravity die cast aluminium (LM6 Grade) supporting arm integrated with die-cast aluminium base (LM6 Grade) suitable for mounting Ø60mm OD pipe. SS fasteners. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. LIGHTING PERFORMANCE Translucent acrylic diffuser of 2.7mm thickness with controlled downward light emission. Lamp fixed position. DYNASTY This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 85%, power factor 0.9, THD 10%, Surge protection 6KV.

Circular Lighting Pole - Ø114 Series, : Ht.5000 : Supply of 5000mm Circular pole made of circular mild steel pipe (grade YST 210) 114.3mm Dia x 3.2mm thick with 4988mm Height. Wind speed considered in design 50 m/sec in compliance with IS 875 Part 3 : 1987. Pole section welded by certified welders using high end MIG welding processes. PDC aluminium service door 348mm height x 106mm width shall be provided with the company logo embossed on the bottom of the door and safety rope with IP protection rating. The control gear tray is prewired with 2.5 Sq.mm cable, 6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 250mm Square x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M16 x 500mm bolts of grade 4.6 at CC180. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension and weight are within +/- 5% tolerance. The pole is coated with pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options.

Juno, Dimension : Ø600 x 422, Wattage : 60W LED. : Supply of Juno ID : 5040 LED 3000K, 4000K, 5700K 230-240Vac CRI 80 MacAdam step 3 Input power : 60W Dimension : Ø600 x 422 mm Light Distribution 360° Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Light Column. IP rating IP65 MATERIAL CHARACTERISTICS Spun aluminium top cover Ø600 x 1.6mm thickness & LED fixing bottom cover. Mild steel rectangle hotdip galvanized supporting arm integrated with Mild steel hotdip pipe Ø102 x 240mm height. Diffuser placed into the provision formed on the pheriphery of the bottom cover. Pressure die cast base (grade ADC12 with test certificate) suitable for Ø60mm OD pipe. SS fasteners. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. LIGHTING PERFORMANCE Translucent acrylic diffuser of 1.8mm thickness with controlled downward light emission. Lamp fixed position. JUNO This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 85%, power factor 0.9, THD 10%, Surge protection 6KV.

Nebula Midi - Spike, Dimension : 113 x Ø73 x 451, Wattage : 12W LED. Supply of Nebula Midi ID : 4267 LED 3000K, 4000K 240Vac CRI 80 MacAdam step 3 Input power : 12W Dimension 113 x Ø73 x 451 mm Beam Angle : 15° / 25° / 40° Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Wall Mounted luminaire. IP rating IP66 MATERIAL CHARACTERISTICS Die- Cast aluminium housing & Front ring (grade ADC12 with test certificate). Surface mounting spike made of Polypropylene black. Silicone clear gasket. SS fasteners. Mechanical resistance IK06. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. LIGHTING PERFORMANCE Toughened Clear glass diffuser of 4mm thickness. NEBULA MIDI This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 84%, power factor 0.95, THD 10%, Surge protection 2.5KV.

In-Ground Luminaire - Asymmetrical, Dimension : Ø173 x 142, Wattage : 18W LED Asymmetrical. Supply of In-Ground ID : 4142 LED 3000K, 4000K, 5700K 240Vac CRI 80 MacAdam step 3 Input power : 18W Dimension Ø173 x 142 mm Beam Angle : 40° (Tiltable 20°) Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Wall Mounted luminaire. IP rating IP67 MATERIAL CHARACTERISTICS Die- Cast aluminium alloy housing (grade ADC12 with test certificate). 316 grade stainless steel front ring. Silicone seal gasket. SS fasteners. Mechanical resistance IK09. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. INSTALLATION AND MAINTENANCE ABS plastic installation housing for preparing the recess opening in ground. The luminaire are fixed in recess installation housing by stainless steel screws. LIGHTING PERFORMANCE Clear toughened glass diffuser with controlled upward light emission. Lamp fixed position This luminaire contains built- in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 85%, power factor 0.9, THD 10%, Surge protection 2.5KV.

Supply of In-Ground with Input power : 6W Floor recess mounted compact in-ground luminaire. Beam angle 15°/ 25° / 40°. Pressure die-cast aluminium housing, Stainless steel top ring (grade 316) with clear toughened glass. Aluminium honey comb for glare free light distribution. ABS plastic installation housing for preparing the recess opening in ground. Single cable entrance via M10 cable gland. All external screws are made of stainless steel. Protection class IP67. Mechanical resistance IK09. Available colour temperature 3000K/ 4000K / 5700K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency 60%, Power factor 0.60, Surge protection 2KV. Luminaire dimension : 108mm diameter x 154mm height. CE & BIS Certified.

Sudo - Asy Frame, COD : 240 x 83 x 70, Wattage : 12W LED. : Supply of ID : 2743 LED 3000K, 4000K, 5700K 230-240Vac CRI 80 MacAdam step 3 Input power : 12W Dimension 255 x 87 x 76mm Light Distribution : Asymmetrical Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Wall Mounted luminaire. IP rating IP65 MATERIAL CHARACTERISTICS Die- Cast aluminium alloy housing (grade ADC12 with test certificate). Die-Cast aluminium asymmetrical front frame (grade ADC12 with test certificate). Silicone clear gasket. SS fasteners. Mechanical resistance IK09. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. INSTALLATION AND MAINTENANCE ABS plastic installation housing for preparing the recess opening in wall for flush mounting.The luminaire are fixed in recess installation housing by stainless steel screws. LIGHTING PERFORMANCE Clear acrylic diffuser of 1.8mm thickness with controlled downward light emission. Lamp fixed position This luminaire contains built- in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 80%, power factor 0.95, THD 10%, Surge protection 2.5KV.

Neon Flex Dimension : 50 M/Roll , Wattage : 9W/ mtr WW. Supply of LED Neon Flex 3000K, 24Vdc CRI 80 MacAdam step 3 Input power : 9W Dimension 1000 x 9.4 x 15 mm Beam angle : 120° Electronic driver ON/OFF (External driver) CE and BIS LUMINAIRE TYPE Facade. IP rating IP66 MATERIAL CHARACTERISTICS copper coated strip,Silicon Moulded Diffuser,end cap,clip, LIGHTING PERFORMANCE silicon moulded diffuser neonn flex this luminiare contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 50,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 70%, power factor 0.80 Surge protection 3KV.

Vera Bollard, Dimension : Ø166 x 971, Wattage : 16W LED. Supply of Vera Bollard ID : 5565 LED 3000K, 4000K, 5700K 230- 240Vac CRI 80 MacAdam step 3 Input power : 16W Height 975mm Light Distribution 360° Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Bollard. IP rating IP65 MATERIAL CHARACTERISTICS Extruded aluminium bottom pipe (grade 6063 with test certificate) Ø166 x 3mm thickness & die-cast aluminium top cover. SS fasteners. Pre treated silicone gaskets. Die-cast aluminium mounting plate Ø167 x 4mm thick with 4 elongated holes 20 x 14 to suit M12 bolts at PCD 110 with pure polyester powder coating. This mounting plate along with foundation bolts of 15 suitable size to be used for ensuring firm grouting into the specially designed foudation. Hot dip galvanised foundation bolt. Mechanical resistance IK08. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. LIGHTING PERFORMANCE Optical grade clear polycarbonate diffuser with controlled downward light emission. Lamp fixed position. AJNA This luminaire contains built- in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 87%, power factor 0.95, THD 8.2%, Surge protection 3KV.

Vera Bollard, Dimension : Ø166 x 440, Wattage : 16W LED. Supply of Vera Bollard ID : 5566 LED 3000K, 4000K, 5700K 230- 240Vac CRI 80 MacAdam step 3 Input power : 16W Height 440mm Light Distribution 360° Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Bollard. IP rating IP65 MATERIAL CHARACTERISTICS Extruded aluminium bottom pipe (grade 6063 with test certificate) Ø166 x 3mm thickness & die-cast aluminium top cover, SS fasteners. Pre treated silicone gaskets. Die-cast aluminium mounting plate Ø167 x 4mm thick with 4 elongated holes 20 x 14 to suit M12 bolts at PCD 110 with pure polyester powder coating. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foudation. Hot dip galvanised foundation bolt. Mechanical resistance IK08. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. LIGHTING PERFORMANCE Optical grade clear polycarbonate diffuser with controlled downward light emission. Lamp fixed position. VERA This luminaire contains builtin LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 87%, power factor 0.95, THD 8.2%, Surge protection 3KV.

Sudo Extended - Asy Frame, COD : 479 x 83 x 71, Wattage : 24W LED, Supply of Sudo ID : 2743 LED 3000K, 4000K, 5700K 230-240Vac CRI 80 MacAdam step 3 Input power : 24W Dimension 490 x 87 x 85mm Light Distribution : Forward Asymmetrical Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Wall Mounted luminaire. IP rating IP65 MATERIAL CHARACTERISTICS Die- Cast aluminium alloy housing (grade ADC12 with test certificate). Die-Cast aluminium Supply of Sudo ID : 2743 LED 3000K, 4000K, 5700K 230-240Vac CRI 80 MacAdam step 3 Input power : 24W Dimension 490 x 87 x 85mm Light Distribution : Forward Asymmetrical Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Wall Mounted luminaire. IP rating IP65 MATERIAL CHARACTERISTICS Die- Cast aluminium alloy housing (grade ADC12 with test certificate). Die-Cast aluminium asymmetrical front frame (grade ADC12 with test certificate). Silicone clear gasket. SS fasteners. Mechanical resistance IK09. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. INSTALLATION AND MAINTENANCE ABS plastic installation housing for preparing the recess opening in wall for flush mounting.The luminaire are fixed in recess installation housing by stainless steel screws. LIGHTING PERFORMANCE Clear acrylic diffuser of 1.5mm thickness with controlled downward light emission. Lamp fixed position This luminaire contains builtin LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 85%, power factor 0.95, THD 10%, Surge protection 4KV.

Supply of Surface mounted swimming pool luminaire for spot light with Input power : 3x2W. beam angle 30°. Luminaire complete housing made of marine grade 316 stainless steel. PMMA diffuser of 8mm of thickness. Hard wired for single colour 2 x 1.0mm2 3metres water resistant cable. Protection class IP68. Mechanical resistance IK08. Available colour temperature 3000K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 54,000 operating hours. Low Voltage at 12Vdc assures safety. Recommended installation depth upto 1meter below the water surface. Luminaire dimension : 95mm diameter x 106mm width x 150mm height. CE & BIS Certified

Cylin Mini, Dimension : Ø100 x 150, Wattage : 18W LED. Supply of Cylin Mini ID : 4082 LED 3000K, 4000K 240Vac CRI 80 MacAdam step 3 Input power : 18W Dimension Ø100 x 150mm Beam angle : 15° / 25° / 40° Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Ceiling Mounted Down Light. IP rating IP65 MATERIAL CHARACTERISTICS Extruded aluminium pipe (grade 6063 with test certificate) Ø100 x 2.5mm thickness & cast aluminium plate for surface mounting on ceiling (grade ADC12 with test certificate). SS fasteners. Silicone gasket. Mechanical resistance IK07. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. LIGHTING PERFORMANCE Hybrid optics with lens & reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Clear touchened glass diffuser of 4mm thickness with controlled downward light emission. Lamp fixed position CYLIN MINI This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 85%, power factor 0.95, THD 10%, Surge protection 3KV.

Line n Dot - Linear Down Light , COD : 160 x 40, Wattage : 12W LED. Supply of KL-3371 - 12W LED WW,CW,NW BA:12° / 34° / 48° C.O.D : 160 x 40mm, Line ’n’ dot offers new application opportunities for a modern and sophisticated look for any type of interior applications, including commercial spaces, Private sector, Hospitality, Museums and other similar areas. It gives a minimalistic and elegant touch to ceilings keeping a clean look. Specially developed and designed optical lenses deliver optimal wide (general) or narrow (concentrated) light distribution to adapt the lighting to specific needs with UGR12. Linear downlight Enhance contrast for horizontal surfaces High-purified die-cast housing, integrated with innovative vaccum aluminium plated chrome finish antiglare UGR12.

Nila, Dimension : Ø500 x 57, Wattage : 36W LED. Supply of surface mounting light fixture of KL-2877 - 36W LED WW,CW,NW, Translucent Ø500 x 57mm

Aston 4, Dimension : 342 x 135 x 365, Wattage : 4 x 60W LED. Supply of Aston 4 ID : 6798 LED 3000K, 4000K, 5700K 230- 240Vac CRI =70 MacAdam step 4 Input power : 4 x 60W Dimension : 342 x 135 x 365mm Beam Angle : 25° / 40° / 60° Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Flood Light. IP rating IP67 MATERIAL CHARACTERISTICS Extruded aluminium housing and module with excellent thermal management heat sink & Mounting bracket made of CRCA sheet (3mm thickness). Mechanical resistance IK08. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. LIGHTING PERFORMANCE Clear polycarbonate optical cover. Lamp fixed position. ASTON 3 This luminaire contains builtin LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 84,000 hours at 40°C. Operating ambient temperature range is from -40°C to +50°C. Driver efficiency 90%, power factor 0.97, THD 5.3%, Surge protection 6KV.

Inground Luminarie (Dimenstion 58 dia. * 122 mm) sutabile for 3 watt LED asymmerical

Supply and installation of Decorative Pole. The Decorative Pole is made out of mild steel tube and cast iron. The total height of the pole is 4500mm nominal above the ground. The bottom section of the pole is of 140mm dia x1000mm long x 4.8mm thick and top section of the pole is 89mm dia x 3500mm long x3.2mm thick including 90 mm long with reduced dia on the top as per Luminaire entry. A service window with proper strengthening to cut out door shall be provided to accommodate a 6 amp SP MCB and 32 amp heavy duty connector for mains connections in the bottom part of the pole. The bottom part and the top part of the pole shall be joined together by using M.S. flanges & shall be welded properly. Cast Iron embellishments shall be fitted and sealed by grub screw fixing. A Round mild steel casted decorative base plate of 335mm dia shall be welded at the bottom of the pole for foundation. The Decorative pole is duly pretreated by Shot Blasting Process and painted in U.V. ray resistant polyurethane/Polyester coating in approved color shade. The Coating on the pole Should have a minimum DFT of 90 microns & Should pass a minimum of 300 Salt Spray Hours as per IS or ASTM testing methods. Decorative pole shall be installed at desired location including foundation of the pole by making cement concrete foundation of 1:2:3( 1 cement: 3 course sand : 6 graded stone aggregate 40mm nominal size) with the help of anchor bolts and 38mm G.I sleeve as required.

Supply and Installation of 54W Led Post Top Luminaire made of Cast Aluminium and fitted with polycarbonate/ PMMA/ Glass diffuser. The dimensions of the Posttop Luminaire are 445 mm width and 1000mm Height. The ingress protection of the Luminaire shall be IP-66. Led shall be mounted on the PCB and fitted in the Luminaire .PCB shall be fitted on the suitable Heat Sink for proper Heat Dissipiation. Suitable Constant Current Led driver with power factor 0.95 or more and efficiency 85% or more Shall also be fitted inside the Luminaire.The luminous efficacy of the Luminaire shall be 100lumens per watt or more and CRI shall be 70 or more, CCT shall be 5700-6500K. The Surface of the Luminaire Shall be machined and polished Properly to give it a Smooth Surface. The Luminaire shall be duly pretreated and Coated in U.V. ray resistant polyurethane/Polyester in approved color shade. A Two Way Connector Shall be Provided in the Luminaire for the mains Connections. Luminaire Shall be installed at the desired location on the decorative pole, complete all in Direction of Engineer in charge.

Supply and Installation of 36W Led Post Top Luminaire made of Cast and Spun Aluminium and fitted with polycarbonate/ PMMA/ Glass diffuser. The dimensions of the Posttop Luminaire are 390 mm width and 890 mm Height. The ingress protection of the Luminaire shall be IP-66. Led shall be mounted on the PCB and fitted in the Luminaire .PCB shall be fitted on the suitable Heat Sink for proper Heat Dissipiation. Suitable Constant Current Led driver with power factor 0.95 or more and efficiency 85% or more Shall also be fitted inside the Luminaire. The luminous efficacy of the Luminaire shall be 100lumens per watt or more and CRI shall be 70 or more, CCT shall be 5700-6500K.The Surface of the Luminaire Shall be machined and polished Properly to give it a Smooth Surface. The Luminaire shall be duly pretreated and Coated in U.V. ray resistant polyurethane/Polyester in approved color shade. A Two Way Connector Shall be Provided in the Luminaire for the mains Connections. Luminaire Shall be installed at the desired location on the decorative pole , complete all in Direction of Engineer in charge.

Supply and installation of Surface mounting Column Light of 3M Height, body constructed withextruded aluminium and die cast aluminium bearing the SME Acrylic diffuser. The square MS base plate shall be of size 250mm x 250mm, 12mm thick and facilitated with 4 elongated slots of 38mm x 19mm at CC180mm to suit the 500mm, J-type, M16 bolts (Grade 4.6) that shall be provided with suitable nuts and plain washers. The cable entry hole Ø70mm is provided at the centre of the baseplate. The 50W LED Light source shall be LUMILED 2835 luminaire with lumen output shall be 7500 lm, CRI 80, MacAdam Elipse 3 step and a life span of 50,000 Hours. Prewired with constant current integral LED driverof Power factor 0.9, THD 10%, Surge Protection upto 6KV and Efficiency 90%and suitable for operation on 230-240V, 50-60Hz single phase ac supply. The stem of the LED compartment shall be extruded aluminium with the top and base made up of Die cast aluminium Square plate 206mm x 206mm. The Jali pattern which is laser cut in sheet aluminium shall be embracing the diffuser. The top cover shall bear an elongated knob to spruce the elegant outlook of the light column. Ingress Protection class : IP65/ Class I safety. A base compartment with a die cast door 330mm H x 75 mm W contoured to the poles's shape housing the gear tray, prewired with MCB, terminal connectors for LILO arrangement. The surface finish of the pole shall be Zinch rich primer coat & pure polyester powder coated Black. Any other wiring/electrical consumables shall be under the scope of purchaser, complete all in Direction of Engineer in charge.

Outdoor LED Display –Display Size (W x H) LED Display of 12.5 feet X 9.44 feet Pixel Pitch 6.67 mm or lower, LED Configuration RGB 3 in 1 SMD ,Nationstar LED Lamp ,Pixel Density Minimum 22500 pixels per sqm or higher Half Gain Horizontal / Vertical Viewing Angle H 140 deg / V 90 deg or better ,Refresh Rate 1920 Hz or better Temp Range -20 to +50 Degrees C or better Grey Scale Processing 14 Bit or better Colours 4.4 Trillion colours Brightness 5000 cd/m² or better Maximum Power Consumption 900 w/sqm or lower Dimming Capability 255 levels Power Input 100 ~ 240 VAC Contrast Ratio 3000:1 or better Access For Maintenance Front IP Level Front : IP65 , Rear : IP 65 LED Tile/ Cabinet Calibration LED tiles/cabinets should be calibrated before being supplied. These screens should also be calibrated after the installation to ensure brightness uniformity. Calibration should also be performed as and when it is required during the warranty period. Offered product which does not support dot calibration shall be rejected Brightness measurement tool Emitted brightness measurement tool namely a luminance meter (which can provide direct brightness reading in cd/m²) for brightness measurement of offered LED screen. OEM of LED Display should provide details (Model No. & Date of Purchase) of the luminance meter available with them in India along with its latest calibration certificate. The same instrument shall be used to check the minimum brightness levels as offered in the bid. Please note- Illuminance meters are not acceptable as they are not for measuring emitted light International Safety Certifications( Mandatory to submit along with the bid) BIS Registration (Bureau Of Indian Standards) As per Standard: IS 13252 ( PART 1) :2010. Offered model BIS certificate should be on OEM brand and their own manufacturing unit in India. Valid BIS certificate to be provided for the offered LED tiles/cabinets. BIS certificate for led module only shall not be considered as valid BIS certificate for the product. The offered model should be clearly mentioned in the BIS certificate. This certificate shall be submitted at the time of bid. Quality/Health & Safety/Environmental Certifications of OEM/OEM subsidiary in India ( Copy to be submitted along with the bid Quality Management System 9001:2015 , Occupation health & Safety Management System - OHSAS 18001:2007 Environmental Management System 14001: 2015 Preferable Makes :Daktronics/Delta /Mitsubishi /NEC

Power Distribution Unit Front Door 2 Hinges with Rack Wall Mount Clamp Welded on Rack frame rear side 19" pillar front & 19" pillar rear Bolted on rack side wall Locking Arrangement To be provided with a locking system Limit Switch The rack door to be provided with a limit switch Earthing Earthing studs should be provided in the rack for Earthing purposes Cable points Cable entry and exit points should be provided in the rack Mounting Should be possible to mount the rack either on a pole or on a wall with options of different mounting types Material GI 120 gsm thickness 1.5 mm IP rating IP54 AC input 380V/220V AC Power Load Max As per LED power requirement Surge protection Class C Over temperature protection Selectable from 30 deg to 60 deg C Anti Theft Should be mounted in an ant-theft design Surface treatment Outdoor type power coating Preferable Makes :Daktronics/Delta /Mitsubishi /NEC

LED Control System : Signal Input DVI/ HDMI Signal Output RJ45 Input Voltage 100~240 VAC Processor Intel/ARM /Other High End OS Android Internal drive 8 GB Video At least should support MPEG-4,MOV Audio MP3,WAV,AAC Image JPEG, PNG,BMP Text Multiple fonts, Speeds, colors Internet HTML, RSS newsfeeds Content Manager To be able to create playlists and send them over the network to media players or more for playout based on schedule and sequencing. License support The software should support management of more players Playlist Automation Flexible scheduling based on day, date and time; Playlist Scheduling; Content Management Design simplified user interfaces Solution Compatibility Complete solution ( LED display , LED control system power distribution unit)should be from same OEM/ Brand to avoid the compatibility issue at the later stage Preferable Makes:- Barco/ Delta / Mitsubishi /Daktronics/NEC

Mechanical Structure For Mounting Of LED Wall Mounting Structure LED wall should be mounted on building façade /customized structure. Structure should be earthed properly and provided.Material Should be made from mild steel and painted black along with antirust coating.

Auto Brightness Sensor Rated voltage 5V ,Operating temperature -30℃~70℃ ,Operating humidity 0~99% ,Brightness range 0~65535 lux ,Cable 5m ,Features • Monitor the ambient brightness to achieve automatic brightness adjustment of LED display • Asynchronous • Outdoor use proofing • No external power supply required Preferable Makes :Daktronics/Delta /Mitsubishi /NEC

Scope for Installation Complete Supply, Installation, Configuration, Testing and Commissioning of all the delivered equipment with necessary cables and accessories

Structure Supply and provinding Brackets as Outdoor wall mounted/unipol, front maintenance led wall , structure installation, structure painting, led mounting brackets, led mounting hardware , led Screen outer border (ACP sheet border) with connectivity as per OEM drawing.

OEM Criteria : OEM should have their own registered office in India from the last 10 years on the date of bid submission.OEM of LED Display should have at least 500 cr. turnover in India in last financial year.OEM shall be ISO 9001, ISO 14001, OHSAS 45001 & ISO 27001:1 certified – Certificates to be submit. OEM should have their own service center across India for support. Franchised or Authorized service center are not acceptable.Service centers should be available in all major metro cities ex. NCR, Mumbai, Bangalore, and Kolkata & Chennai with their own engineer at each location. GST registration number for all these service centers.Installation, Commissioning, after Sales support shall be provided by OEM only.OEM should have installed at least 100 Outdoor LED display based on SMD Technology only (DIP technology is not acceptable) with at least 16.56 sqm area or higher connected in single network and content published from a central location in India for any PSU/ government. These displays should be installed in last 5 years from the date of RFP release . Installation report / Customer letter to be submitted along with the bid (Engineer-In-Charge will be final for approval of any material)

Aston 1, Dimension : 342 x 135 x 165, Wattage : 1 x 60W LED. Supply of Aston 1 ID : 6420 LED 3000K, 4000K, 5700K 230- 240Vac CRI =70 MacAdam step 3 Input power : 1 x 60W Dimension : 342 x 135 x 165mm Beam Angle : 25° / 40° / 60° Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Flood Light. IP rating IP67 MATERIAL CHARACTERISTICS Extruded aluminium housing and module with excellent thermal management heat sink & Mounting bracket made of CRCA sheet (3mm thickness). Mechanical resistance IK08. Pure polyester powder coated process: Acid treatment & pure polyester powder coating. LIGHTING PERFORMANCE Clear polycarbonate optical cover. Lamp fixed position. ASTON 1 This luminaire contains builtin LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 84,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency90%, Power factor 0.95, THD 7.8%, Surge protection 6KV.

In-Ground Luminaire - One Way, Dimension : Ø116 x 169, Wattage : 9W LED. Supply of In-Ground ID : 4136 LED 3000K, 4000K, 5700K 240Vac CRI 80 MacAdam step 3 Input power : 7W Dimension Ø166 x 169 mm Light Distribution : 1 Way Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Wall Mounted luminaire. IP rating IP67 MATERIAL CHARACTERISTICS Die- Cast aluminium alloy housing (grade ADC12 with test certificate). 316 grade stainless steel front ring. Silicone seal gasket. SS fasteners. Mechanical resistance IK09. Pure polyester powder coated process : Acid treatment & pure polyester powder coating. INSTALLATION AND MAINTENANCE ABS plastic installation housing for preparing the recess opening in ground. The luminaire are fixed in recess installation housing by stainless steel screws. LIGHTING PERFORMANCE Clear acrylic diffuser with controlled upward light emission. Lamp fixed position This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from - 15°C to +50°C. Driver efficiency 80%, power factor 0.90, THD 10%, Surge protection 1KV.

Supply of DA POLE @ height of 5190mm made of cast iron (ASTM A48 grade class-25). Decorative base made of cast iron (AF380mm x 1567mm Height). Continuously tappered decorative flutted pipe made of cast iron (126 Bottom Dia & 86 Top Dia x 1889mm height) fitted on cast iron base. Decorative cast iron embellishment with die- cast aluminium for mounting double arm bracket. The double arm snaky bracket is a split constructed type, Bracket stem made of MS pipe 76.1mm Dia x 2.6m thick x 480mm length, crowned at top with a Cast Iron tomb of 260mm Height. The snaky curved double arm made of MS pipe 50.8mm x 2.3mm thick, extending from stem is spruced up with MS Leaf & scroll designer embellishment and facilitates the fitment of pendant / post top luminaire through a pipe holder at 700mm on either side from the vertical axis of the bracket stem. Wind speed considered in design 50 m/sec in compliance with IS 875 Part 3 : 1987. Pole section welded by certified welders using high end MIG welding processes. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 250mm Square x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M16 x 500mm bolts of grade 4.6 at CC180. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation.All dimension within +/- 5% tolerance. The pole is coated with pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options.

Supply of pole-top luminaire with Input power : 45W LED Symmetrical light distribution. Luminaire made of spun aluminium, die cast aluminium and non corrosive stainless steel fasteners. Aluminium magudam attachment added for aesthetics. Prismatic diffuser. Pure polyester powder coated graphite grey & gold / anthracite grey & gold / jet black & gold. Available colour temperature 3000K/ 4000K / 5700K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency 85%, Power factor 0.90, THD 10%, Surge protection 6KV. Luminaire dimension: 495mm diameter x 960mm height. Suitable for mounting on Ø76 mm OD pipe. CE & BIS Certified.

Supply of wall recessed luminaires with Input power : 6W Led for illuminating walls and stairs. Forward asymmetrical light distribution. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. ABS plastic installation housing for preparing the recess opening in wall / stairs. Clear acrylic diffuser. Single cable entrance via M10 cable gland. Protection class IP65. Mechanical resistance IK09. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K / 5700K, Colour rendering index (CRI)80. SDCM-3 MacAdam. K- Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 130mm length x 87mm width x 76mm height. Luminaire installation in a recessed opening cut-out dimension :124mm length x 83mm width x 70mm height. CE & BIS Certified.

Supply of In-Ground with Input power : 9W Floor recess mounted compact in-ground luminaire. Beam angle 8°/ 12° / 40° / 60° /40°x11°. Pressure die- cast aluminium housing, Stainless steel top ring (grade 316) with clear toughened glass. ABS plastic installation housing for preparing the recess opening in ground. Single cable entrance via M10 cable gland. All external screws are made of stainless steel.Protection class IP67. Mechanical resistance IK09. Available colour temperature 3000K / 4000K / 5700K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply.Driver efficiency 85%,Power factor 0.90,THD 10%, Surge protection 2KV. Luminaire dimension : 116mm diameter x 153mm height. CE & BIS Certified.

5 KVA Inverter UPS , Battery Voltage  (V) : 96 V DC ,  Protection  provided against : Overload, deep discharge, short-circuit, Reverse polarity & Input mains protection through MCB. , Power Output : 3800 Watt , Display on  UPS/Inverter : Battery Charging, Low battery, Mains, Voltage, Overload indication,  Battery top up , Input voltage :  110 V to 290 V , Output Voltage (Ups Mode) : 180 V to 230 V , Charging Current : 12 Amps.

HUMBERTO-C H Pole : Ornamental approx 3300mm Decorative cast aluminium pole having cast aluminium base and minimum boltom square size 355mm) and galvanised mild sfeel upper profile having dia 105mm with minimum 14nos groove on outer circle of pipe. Pole will be suitable for LED Post Top Fixture. Pole is having MS base plale 460x460x12 mm and hole to hole 380mm. Pole is having a service window at bottom comprising 4 way connector and MCB for Loop in and loop out arrangement. Pole and bracket are properly machined and treated before epoxy primer coating and polyurethene painted in grephite grey Italian capcicot

Bracket : Four arm bracket, approx height 700mm (four-sides). Bracket is provided for Mounting of decorative GLS post top fixture. Bracket is made of cast Aluminium/MS pipe with decorative embellishment.

Pole/Post Top mounting round opal globe fixture made out of PC Material Suitable for B-22d lamp holder and LED’s Lamp.