Rajasthan Council Of Secondary Education Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 3,52,460Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of New Kgbv Hostel Building, Rajgarh Block
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_RCSE_126354_2Bid Award Id
ViewTender No
08(CIVIL)/2018-19/CHURUTender Authority
Rajasthan Council Of Secondary Education ViewPurchaser Address
-Website
http://http://education.rajasthan.gov.in/content/raj/education/rajasthan-council-of-secondary-education/en/home.html
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supply transporation etc. & Stacking good earth at site complete including loading unloading & transporation etc.
200
30400
152
Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level
-
-
-
1:4:8 (1 cement:4 Coarse sand :8 gradeed stone aggregate 40 mm nominal size).
57.49
151488
2635
Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level M 10 grade nominal Mix1:3:6(1 cement:3 Coarse sand : 6 gradeed stone aggregate 20 mm nominal size).
88.51
259080
2927
Random rubble dry stone Kharanja under floor.
134.11
83283
621
Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in cement mortat 1:6 (1-Cement: 6- Sand)
100.83
221830
2200
Brick work with clay flyash F.P.S. brick of class designation 75 in superstructure above plinth level upto floor five level in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) Extra over item of brick work for doing brick work with class designation100 instead of class designation 75.Quantity in Cum.
141.07
540302
3830
Half brick masonry in Superstructure, above plinth level upto floor v level using bricks of designation 75 . Cement mortar 1:4 (1 cement : 4 coarse sand)
979.39
318302
325
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement M20 grade Nominal Mix / Design Mix
202.73
793265
3913
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.
M20 grade Nominal Mix / Design Mix
304.09
1371438
4510
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation, footings, strap beam, raft, bases of columns etc.
615.99
67142
109
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :
-
-
-
Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.
2155.95
441969
205
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Columns, pillars, posts and struts etc.
307.99
72070
234
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished :
-
-
-
20 mm thick
1057.76
118469
112
12mm Thick.
4507.64
387657
86
6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3 - fine sand)
1130.2
102848
91
Glazed Window : Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required
-
-
-
Windows fixed
-
-
-
Partly fixed and partly openable [ fixed area not to exceed 33%]
228.62
431643
1888
Wire Gauge Supplying & fixing fixed wire Gauge of 14 mesh X 24 Gauge to the Metal frame of rolled section by metal beading 20X3mm with suitable screw at not exceeding 150mm distance.
228.62
110882
485
Guard Bars: P&F square bars or other flat welded to window/ventilators etc., Guard bar 12 x12mm
2779.8
169567
61
Providing and fixing T- iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips of with bolts and nuts as require including fixing of necessary butt higes and screws and applying a priming coat of approved steel primer.
1752.67
129697
74
Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' 30mm thick. Commercial Veneer both side
130.27
159716
1226
Providing double leaf door shutter instead of single leaf door shutter
4.55
350
77
Extra for cutting rebate in flush door shutters for making double leaf shutter (Total area of the shutter to be measured)
4.55
387
85
Extra for providing external lipping with 2nd class teak wood battens 6mm minimum depth on all edges of shutters (over all area of door shutter to be measured)
134.83
24269
180
Providing and fixing M.S. sheet 1 mm thick single leaf door shutter in angle iron frame 35X35X5mm suitabilly diagonally braced with 25X3mm flat iron above and below lock rail of size 50X5mm beading extra including all fittings as peer direction of engg. incharge but excluding cost of chowkhats including two coats of anit- corrosive red oxide primer paint
2.28
3447
1514
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:
-
-
-
Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.
-
-
-
A. Ceiling Area
1130.2
62161
55
B. Inner plaster Area
4507.64
247920
55
Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete
5637.85
434114
77
Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: .
-
-
-
On New work.
1057.76
127988
121
PANTING ON DOORS & WINDOWS :- Painting with syntheitic enamel paint of approved brand and manufacture in all shade to give an even shade new steel work (2 or more coat on new work).
887.58
34615
39
Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm
1026.86
791708
771
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete(For area of each slab upto 2001 Sqcm)
296.35
230562
778
Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges Kota stone 25 to 30 mm
55.76
29609
531
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in charge in skiriting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete. Category - I : Kajariya, Jhonson, Orient, Somani make etc.
280
213916
764
Providing and laying Ceramic MAT floor tiles (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown of any size, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in white cement mixed with pigment of matching shade complete. Add extra for using dark shade tiles like 'burgundy, bottle green, black etc in ceramic glazed and shade other than White, Ivory, Grey, Fume Red Brown in MAT finished tiles
111.25
103235
928
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Light shade using shade cement.
32.53
12067
371
Grading roof for water proofing treatment with water proffing compound: Cement concrete 1: 2: 4 (1 cement: 2 Course sand: 4 Greded stone aggregate 20 mm nominal size)
49.57
173392
3498
Providing and fixing 1 mm thick M.S. sheet sliding shutters with frame & diagonals braces of 40x40x6 mm. angle iron 3 mm M.S. gusset plates at the junction and corners, 25 mm dia pulley 40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer.
149.84
571500
3814
Providing gola 75x75 mm in cement concrete 1:2:4 ( 1 cement ; 2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand ) as per standard design
123.78
3218
26
Making khurras 450 x 450mm with average minimum thickness 50 mm cement concrete 1:2:4 over P.V.C sheet 1 mtr. X 1 x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement rounding edges and making and finishing the out let complete
10
1270
127
Providing and fabricating reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding(including cost of binding wire) all complete up to floor five level. TMT bars (conforming of relevent IS code)
59644.13
4055800
68
Filling of sunk portion of roof with earthen post of required height including filling voids with 1;3;6 light concrete, using brick bats complete leveling and dressing the surface by 50mm thick cement concrete 1;2:4 as per specification
-
-
-
Toilet Block
33.19
40327
1215
Making grooves as per design in plaster 10mm to 20mm wide.
123.78
495
4
Providing and fixing curtain rods of 1.25 mm thick chormium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs, etc. wherever necessary complete 20mm
116.92
38583
330
Applying priming coat with ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood.
-
-
-
Doors
28.19
451
16
Precast terrazzo tiles of approved make, 20 mm thick with marble chips of size upto 6 mm laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete on 20 mm thick bed of cement sand mortar 1:4 Dark shade using ordinary cement.
650.66
291496
448
Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).
-
-
-
For fixed portion: Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron)
9.5
2650
279
For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron)
15
4290
286
Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.) With timted glass panes of 5.0 mm thickness ( weight not less than 13.75 kg/sqm)
5.45
4796
880
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate
2
6222
3111
Providing and fixing brass lock without handle for aluminium door, or approved quality, make & design as directed by Engineer inc harge
2
854
427
Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge .
Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron)
2
104
52
Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 Sqm. 4480.00 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension).
5.86
22735
3883
Supply & fixing of stainless steel pipe railing for ramp railing height, 90 cm. with 40 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate horizontal pipe with suitable height of same size and gauge with coupling, grinding and polishing & fix of master pieces as per required point as per approved design of Engineer incharge.
41.34
117819
2850
Part B Boundary Wall
-
-
-
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
138.06
16843
122
P.C.C. IN FOUNDATION Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8 (1 cement:4 Coarse sand :8 gradeed stone aggregate 40 mm nominal size).
24.78
65296
2635
Random Rubble stone masonry with hard stone in superstucture above plinth level and upto five level wall upto 30 cm and less thickness cement sand mortar 1:6 (1-Cement: 6- Sand)
96.66
212655
2200
DPC:-Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required excluding the cost of centering, shuttering and reinforcement . M20 Grade Nominal Mix/Design mix.
7.42
29027
3913
STONE MASONRY IN SUPER STRUCTURE: Random Rubble stone masonry with hard stone in superstucture above plinth level and upto five level wall upto 30 cm and less thickness cement sand mortar 1:6 (1-Cement: 6- Sand)
63.84
176767
2769
Beams:-Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.
M20 grade Nominal Mix / Design Mix
0.96
4310
4510
Slab:-Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.
M20 grade Nominal Mix / Design Mix
1.75
7903
4510
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.
63.9
14953
234
Steel Reinforcement:Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code)
932
63376
68
Labour charges for cutting, bending for fabrication and binding reinforcement (plain or tor/ribbed/TMT steel) as per drawing and design for R.C.C. and R.B. work including cost of binding wire with all lead and lift up to floor five level complete.
932
3728
4
Pillar Masonary :- Random Rubble stone masonry with hard stone in superstucture above plinth level and upto five level for square or rectangular pillers cement sand mortar 1:4 (1-Cement: 4- Sand)
12.83
39961
3114
Door Frames:-Providing and fixing in CM 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :Size 100 x 75mm.
10.21
1011
99
Doors:-Providing and fixing M.S. sheet 1mm thick double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint
3.58
6500
1816.8
Glazed Window:Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :Partly fixed and partly openable [ fixed area not to exceed 33%]
1.63
3070
1888
Wire Gauge Supplying & fixing fixed wire Gauge of 14 mesh X 24 Gauge to the Metal frame of rolled section by metal beading 20X3mm with suitable screw at not exceeding 150mm distance.
-
-
-
Less 20% glazzed area
0.33
157
485
Guard Bars: P & F square bars or other flat welded to window/ventilators etc., Guard bar 12 x12mm
42.62
2600
61
Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.
4.21
206
49
Supply transporation etc. & Stacking good earth at site complete including loading unloading & transporation etc.
4.21
639
152
Stone Kharanja: RR Dry stone kharanja under floor
2.1
1305
621
Cement Concrete:- Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8(1 cement:4 Coarse sand :8 gradeed stone aggregate 40 mm nominal size).
1.4
3693
2635
Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm
6.97
5374
771
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete(For area of each slab upto 2001 Sqcm)
1.64
1277
778
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 20 mm thick
866.03
96995
112
Plaster (Ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand)
13.8
1255
91
Grading roof for water proofing treatment with water proffing compound: Cement concrete 1: 2: 4 (1 cement: 2 Course sand: 4 Greded stone aggregate 20 mm nominal size)
1.05
3677
3498
Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size). Cement mortar 1:4 (1 Cement : 4 coarse sand)
0.7
2053
2930
Gola Providing gola 75mm x 75mm in cement concrete 1:2:4(1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge) including finished with cement mortar 1:3(1 cement: 2 fine sand) as per standard design.
1.44
37
26
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:
-
-
-
Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.
100.37
5520
55
Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect
-
-
-
On New work.
767.19
92830
121
PANTING ON DOORS & WINDOWS :- Painting with syntheitic enamel paint of approved brand and manufacture in all shade to give an even shade new steel work (2 or more coat on new work).
5.07
197
39
COPING:-Providing and laying cement concrete including curing compaction etc. complete in retaining walls, return walls, walls(any thickness) including attached pilasters, columns, piers, abutments, pillers, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc upto floor five level excluding the cost of centering and shuttering. M15 grade nominal mix 1:2:4(1 cement:2 Coarse sand :4 gradeed stone aggregate 20 mm nominal size).
46.14
163946
3553
P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110mm dia
3.75
667
178
P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.5 110mm dia
10
1260
126
Pipe Clip 110 mm dia
10
270
27
Providing and fixing steel gate , grating, and grils made of angels , tees, square bars, flats, or black pipe with hold fast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.
1600
130240
81.4
Providing and laying factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge.
General specification of blocks:
1) Shape as defined by Engineer incharge
2) Tensile splitting strength and braking load as per BS 6717:2001
3) Color: Grey cement natural colour
4) Variation in dimension: Less than 1.6mm.
5) Variation in thickness: Less than 3.2mm
6) Abrasion: As per BS: 6717:2001
121.51
65861
542
Part C SANETARY WORK
-
-
-
P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor:
-
-
-
Size 580x440mm.
14
20720
1480
P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor
4
4760
1190
P & F water closet Seat Covers with brass hinges complete :
-
-
-
-do- White.
4
1300
325
P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:
-
-
-
PVC with PVC bend as per IS : 7231 .
19
22515
1185
P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.
-
-
-
Flat Back (small) size 456x355x265mm.
1
900
900
P& F waste Coulping with fittings of approved quality /make:
-
-
-
C.P Brass 32 mm dia
18
1800
100
C.P Brass 40 mm dia
18
3186
177
P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,
25 mm G.I. waste pipe complete including cutting & making good the wall.:
-
-
-
Size 580 mm x 430 mm
18
28170
1565
P& F waste Pipe with all fitting
-
-
-
P.V.C. with C.P. nut 40 mm dia
18
2646
147
P & F Grating of approved quality/make:
-
-
-
Stainless Steel Sheet size 125mm dia.
28
1022
36.5
P & F Liquid Soap Container with brackets complete of approved make:
-
-
-
C.P. brass
10
1150
115
P & F Soap Dish or Tray of approved quality/make
-
-
-
C.P. brass
10
420
42
P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.
4
1260
315
Providing & fixing C.P.flange for 15mm dia taps.
35
542
15.5
P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:
-
-
-
C.P. Pillar cock, 15 mm dia nominal bore
18
9504
528
P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:
-
-
-
C.P. Brass bib cock,15mm nominal bore.
18
8226
457
P & F Stop Cock (IS :8931 Mark), superior quality & of approved make:
-
-
-
C.P. Brass 15mm nominal bore.
30
14130
471
P & F 15 mm. Dia Connection Pipe of approved quality/make :
-
-
-
(-do-) 600mm.
30
2100
70
P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :
-
-
-
Brass wt.400 gm,15mm.
18
3798
211
Brass wt.750 gm, 20mm.
18
5994
333
(-do-) wt.1000 gm, 25mm.
18
6516
362
(-do-) wt.1000 gm, 32mm.
10
3650
365
(-do-) wt.1200 gm 40mm.:
10
6080
608
(-do-) wt.2000 gm 50mm.
10
6320
632
P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:
-
-
-
500 (-do-)
2
6352
3176
1000 (-do-)
6
38100
6350
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)
-
-
-
20mm nominal outer dia pipes
75
13725
183
25 mm nominal outer dia pipes
275
64075
233
32mm nominal outer dia pipes
125
36250
290
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.
(External work).
-
-
-
25 mm nominal outer dia pipes
100
15100
151
32 mm nominal outer dia pipes
150
29100
194
40 mm nominal outer dia pipes
75
20025
267
50 mm nominal outer dia pipes
50
20850
417
P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type.
-
-
-
Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size 300 X 300mm.
7
5978
854
Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.
-
-
-
-do- size 450 x 450mm depth upto 0.5 M Cement cover with frame
16
23664
1479
-do- size 600 x 450mm depth upto 0.5 M Cement cover with frame.
10
18800
1880
-do- depth upto 0.5 M to 1.0 M –do-
10
26330
2633
P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.
-
-
-
160 mm dia
100
24400
244
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make
-
-
-
75 mm dia
30
4800
160
110 mm dia
100
27000
270
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make
-
-
-
Coupler
-
-
-
75mm dia
15
780
52
110mm dia
30
2340
78
Bend 45 Dg.
-
-
-
75mm dia
5
285
57
110mm dia
5
480
96
Door Bend 87.5 Dg.
-
-
-
75mm dia
5
450
90
110mm dia
5
700
140
Single 'Y'
-
-
-
75mm dia
20
2120
106
110mm dia
20
4000
200
Socket Plug
-
-
-
75mm dia
20
900
45
110mm dia
8
448
56
Pipe Clip
-
-
-
75mm dia
125
1812
14.5
110mm dia
150
3300
22
W.C. Connector
-
-
-
110mm dia
18
2844
158
W.C. Connector (Bend) with ring
-
-
-
110mm dia
18
2988
166
Multi floor trap
-
-
-
110mm dia
18
3168
176
Nahni Trap with Jali 4”
-
-
-
110mm dia
18
2268
126
Nahni Trap without Jali 4”
-
-
-
110mm dia
26
2860
110
Vent Cowel
-
-
-
110mm dia
15
532
35.5
Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.
-
-
-
Depth up to 0.5 M
4
9768
2442
Add extra over item 3.21.1 for every additional 0.10m depth above 0.5 m depth.
4
1240
310
Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete (Width W= Diameter of pipe in Cm+30 Cm.)( Excluding cost of pipe)
-
-
-
100mm dia S.W. pipe
15
5175
345
150mm dia S.W. pipe
200
83000
415
Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-
-
-
-
Size 400 x140x150 cm.(for 50 users)
2
56910
28455
Construction of Soakage well in all types of soil of approved drawing, top 1.5 Mtr. depth in 345 mm thick brick masonary with CM 1:6, 80mm thick stone slab covering resting on stone lintel of cross section 150 x 300mm (two numbers resting on stone bed plate), jointing of slab in CM 1 : 3, Ralthal, Kharanja 40 mm thick M-15 grade C.C. flooring, out side plaster in CM 1 : 6 upto 450 mm depth, earth work etc complete including disposal of surplus earth within a lead of 50 Mtr. including providing and fixing of PVC Vent pipe 75mm dia upto 1.50 Mtr. height as per direction of Engineer in Charge including making connection etc. 3 Mtr. outer dia in top 1.50 M depth and 90 Cm dia at bottom. Depth of soakage well 10 to 12 Mtr. from ground level. [As per Bikaner Practice].
-
-
-
Inner dia 90 Cm & 10 to 12 Mtr deep.
2
34852
17426
P & F Mixing Range (15mm)
-
-
-
C.P. wall mixer telephonic type crutch & telephonic shower.
10
32130
3213
(-do-) without crutch & telephonic shower.
10
24020
2402
C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty).
10
3430
343
Construction of tube-well from ground levels and upto 100 Meter depth and above to accommodate housing and assembly pipe of following sizes in all types of alluvium strata by percussion/ rotary drilling method and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I -& II) 1979 as amended upto date (the work includes the cost of gravel & its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coir-rope, wherever necessary, for arresting fine sand particles. The work will not include cost of housing pipe and strainer pipe assembly and development work, but work would be completed after obtaining sand free water).
-
-
-
150 mm Nominal bore.
60
95400
1590
Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing Pipe
-
-
-
150mm-do-
40
26400
660
Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work.
-
-
-
Nominal bore of pipe (mm) 150
80
96800
1210
Supply of strainer pipes 4.6 made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985.
-
-
-
150 mm Nominal Bore.
20
28200
1410
S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size:
-
-
-
150mm dia
1
252
252
S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.
2
520
260
SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect.
-
-
-
100 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively.
-
-
-
3.0 HP, 1-Ø, (69-125)Mtr, (110-33)LPM
1
23057
23057
Development of tube well as per IS specification using suitable compressor to give sand free water for required yield of the gravel packed tube well.
10
5150
515
Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985.
-
-
-
150 mm Nominal Bore.
10
14100
1410
Supplying and installation of 32 mm dia G.I. pipe medium class IS 1239 marked in 3m length including all accessories and fittings required for installation of hand pump.
100
25800
258
Supply and fixing of Oil / Air break Starter panel made out of sheet steel powder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors.
-
-
-
For Three phase Submersible / Mono block pump
-
-
-
3.0 HP to 10.0 HP ( DOL )
1
4450
4450
P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required.
-
-
-
6.0 Sq.mm 3 core flat / Round
125
23500
188
Testing verticality of tube-well by plumbing system and yield test and draw down test by pumping system as per IS: 2800 (Part II) 1979.
1
7350
7350
1.0 mm thick Salem stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling.
-
-
-
Overall size Bowl size
-
-
-
(inches) (inches)
-
-
-
37 x 18 x 7 17x15x7 (with drain board)
1
5843
5843
P & F Sink Cocks of superior quality & approved made :
-
-
-
C.P. Sink cock swinging spout 15mm.
1
510
510
PART D ELECTRICAL WORK
-
-
-
Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required.
-
-
-
Short point (up to 3 mtr.)
55
14300
260
Medium point (up to 6 mtr.)
85
32045
377
Long point (up to 10 mtr..)
195
99060
508
Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required.
-
-
-
On board
60
14640
244
Medium point (up to 6 mtr.)
100
44500
445
Long point (up to 10 mtr..)
80
45680
571
Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.
12
6456
538
S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required.
-
-
-
25 mm (for Light Circuit, Power circuit, TV,LAN & Tel. Cable )
2400
100800
42
32 mm (for Main Cable)
300
19500
65
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. (Group-1)
-
-
-
1 x 1.5 sq.mm
200
2800
14
2 x 2.5 sq. mm. + 1x1.5sqmm (Light Circuit)
1550
82150
53
2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. (Power Circuit)
150
11550
77
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. (Armoured Cable)
-
-
-
16.0 Sq.mm
-
-
-
4 core
300
53400
178
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.
-
-
-
4 x 16.0 sq.mm
10
1080
108
Supplying and drawing PVC jacketed with annealed bare copper inner conductor & tinned copper conductor shielding foam PE dielectric coaxial cable of approved make in existing surface or recessed conduit/casing capping including making connections as required.
-
-
-
RG - 6
100
2300
23
P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required
-
-
-
T.V. coaxial socket
2
206
103
Supply and Installation of Information outlets made of high impact plastic body ABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Cat 6 application complying to latest ammendments EIA/ TIA 568 B.2-1 Specifications in existing modular /MS Boxes along with necessory connections as required
3
1140
380
Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required. (Group-1) (LAN & CCTV)
400
14400
36
SITC of 10/100 MBPS Unmanaged Switch
-
-
-
8 Port
1
1500
1500
RJ-11 telephone jack single two line
5
430
86
P & F following size mounting grid plates with cover plates
-
-
-
1/2 Module
7
483
69
P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required.
-
-
-
1-2 Module
7
280
40
Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS -113C of approved make in existing surface or recessed conduit/casing capping.
-
-
-
Unarmoured Telephone cable in existing surface or recessed conduit/casing capping.
-
-
-
2 pair
125
1625
13
Jelly filled armoured (PIJF) Armoured telephone cable including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.
-
-
-
10 pair
75
14250
190
P & F Krone module with base frame in the recess / surface made out of 16 SWG sheet steel box, front openable, having locking arrangements duly powder painted.,including dressing, ferruling and punching of telephone cable with krone tool etc. as required.
-
-
-
10 Pairs
1
681
681
P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.
-
-
-
Double door (Three phase)
-
-
-
8 Way
1
2480
2480
12 Way
3
10560
3520
P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.
-
-
-
Single pole MCB
-
-
-
6 A to 32 A rating
95
14345
151
Four pole MCB
-
-
-
40 A to 63 A rating
4
5512
1378
P&F 240/415 V Residual current circuit breaker conforming to IS:12640:1988/ IEC 61008 on existing board/sheet including making connections, testing etc. as required
-
-
-
Two pole 100/300mA sensitivity
-
-
-
40 A rating
12
21372
1781
P & F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.
-
-
-
1200 mm sweep
67
97217
1451
P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .
67
6365
95
P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required
-
-
-
5 step fan regulator 2 Module
67
30820
460
P & F of ventilating fans, Capacitor start, single phase with PVC impeller, ABS body, automatic openable louver shutter in existing opening including making connection, testing etc. as required.
-
-
-
250 mm sweep
13
20098
1546
P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.
13
234
18
P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required.
38
760
20
P & F strip type fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating / stove enamelled paint) / (extruded non corrosive UV resist EP channel) complete with accessories (Low Loss Copper Choke, starter, starter seat) / Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required( without tube). Group 1
-
-
-
1 X 36 Watts with EB
157
59189
377
Flourscent powder coated (minimum 3 star rating)
-
-
-
36/40 Watts
157
9891
63
P & F IP-65 protected Wall mounted Bulk Head light fixture suitable for 15/18 watt CFL lamp with integral control gear, housing made from cast aluminium with UV stablized diffuser comprising of copper ballast, copper conductor including making connection testing etc. as required (without lamp)
15
7800
520
P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required. 13/18 watt
15
2655
177
P & F socket size flush type 120/280 watt rotary 5 step fan regulator including making connection testing etc. as required.
-
16944775
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements