Public Works Department Tender

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501, Using vacuum dewatering with required machinery

Providing and fixing of retro- reflectorised inclusive cautionary, mandatory and informatory sign as per IRC-67 made of high intensity grade sheeting lettering, border & signs fixed over aluminium sheeting, 1.5 mm thick, fixed on mild steel angle iron frame 50mmx50mmx6mm supported on a mild steel angle iron post 75mmx75mmx6mm upto the top of sign board, length of post from bottom of sign board is 2.85m. upto foundation level post duly painted in black & white synthetic enamel. fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 Cm x 45 Cm x 60Cm, 60 cm below ground level as per approved drawing & as per MORTH specification Cl. 801. 80 cm x 60 cm rectangular

Providing and applying primer coat over prepared surface or granular base with bitumen emulsion as per IS: 8887 & manufacturer’s specifications @ 8.5 kg /10 sqm with a self propelled of towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI 502,112 ( Including cleaning of road surface )

Providing and applying tack coat on the prepared surface ,with bitumen emulsion as per IS : 8887 & manufacturer’s specifications @ 2.75 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI.503,112 ( Including cleaning of Road Surface

Providing and laying open graded premix carpet 20mm thick (compacted) on prepared surface in a single course as wearing course aggregates as per Table 500-23, heating bituminous binder @ 14.6 Kg/10 Sqm.(VG-30 grade) and aggregates in Hot Mix Plant, transporting the mixed material with tipper and laying with paver finisher to the required level and grade, rolling with power roller, 8-10 tonne but excluding cost of tack and seal coat with lead for mix of material 1 Km.[MORTH Specification : Clause 511,112]In approved Hot Mix Plant as per clause 6.5 of Manual, including loading of aggregates with F.E loader with VG-30 bitumen.

Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall, including rolling with a smooth wheeled roller 8 - 10 tonne capacity finished to required level and grades, complete as per MORTH specification clause 513 Type B - Premixed in in approved HMP as per clause 6.5 of manual having capacity 50 TPH comprising of aggregate (sand or grit) having size 2.36 mm to 180 micron @ 0.06 Cum per 10 Sqm and bitumen binder (VG-30 grade) @ 6.8 Kg / 10 sqm and laying by hydrostatic paver finisher with sensor control, including mixing, transportation, laying, rolling etc. complete - including carriage for 1 Km. lead.

Somta to Jodwas Road at km 1 Earth work in excavation for foundation of structure complete with all lift, dewatering shoring and shuttering etc.including refilling of trenches in 25.mm layers, ramming, watering and disposal of surplus soil within a lead of 1000 metres, as per drawing and technical specfication.[MoRTH Specification : Clause : 304] In hard Soil [MoRTH Specification : Clause : 301] Depth upto 3m

Earth work in excavation for foundation of structure complete with all lift, dewatering shoring and shuttering etc.including refilling of trenches in 25.mm layers, ramming, watering and disposal of surplus soil within a lead of 1000 metres, as per drawing and technical specfication.[MoRTH Specification : Clause : 304] In hard rock (requiring blasting) [MoRTH Specification : Clause :301,302]

Cement Concrete for plain/reinforced concrete in open foundation, any level, complete as per drawing and technical specifications. [MoRTH Specification Section 1700&1500] P.C.C.M15 grade

Stone masonry work in cement mortar 1:3 with mechnical mixer for foundation (any level) complete, including all acaffolding etc., excluding pointing and plastering as per drawing and technical specification. [MoRTH Specification: Section 1000,1400] Random Rubble Masonry

Plain/reinforced cement concrete in substructure complete as per drawing and technical specifications MoRTH Section 1500,1700, 2200. RCC Grade M-30 Height upto 5.00m.

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MoRTH specification section 1600.

Providing and fixing 20mm thick compressible fibre board in expansion Joint complete.

Plastering with cement mortar (1:3) on brick work in substructure as per Technical specifications MoRTH Section 1300,2200.

Back filling behind abutment, wing wall and return wall complete as per drawing and technical specifications clause 710.1.4 of IRC 78 & MoRTH section 2200. Sandy material

Construction of precast RCC railing of M-30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion complete as per approved drawings and MoRTH specification 2703, 1500, 1600, 1700.

Providing and fixing of retro- reflectorised inclusive cautionary, mandatory and informatory sign as per IRC-67 made of high intensity grade sheeting lettering, border & signs fixed over aluminium sheeting, 1.5 mm thick, fixed on mild steel angle iron frame 50mmx50mmx6mm supported on a mild steel angle iron post 75mmx75mmx6mm upto the top of sign board, length of post from bottom of sign board is 2.85m. upto foundation level post duly painted in black & white synthetic enamel. fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 Cm x 45 Cm x 60Cm, 60 cm below ground level as per approved drawing & as per MORTH specification Cl. 801. 80 cm x 60 cm rectangular

Providing and erecting direction and place identification retro - reflectorised sign as per IRC:67 made of high intensity grade sheeting exclusive of lettering, border & signs fixed over aluminium sheeting, 2 mm thick fixed on a mild steel angle iron frame 50mmx50mmx6mm supported on mild steel angle iron post 75 x 75 x 6 mm upto the top of sign board, length of post from bottom of sign board is 2.85 m. upto foundation level post duly painted in black and white synthetic enamel alternate ship 30cm. wide fixed to the ground by means properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60 Cm , 60 Cm below ground level as per approved drawing & as per MORTH specifications clause 801. 120 cm. X 90 cm.

Providing and applying tack coat on the prepared surface ,with bitumen emulsion as per IS : 8887 & manufacturer’s specifications @ 2.75 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI.503,112 ( Including cleaning of Road Surface

Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-18 for wearing course including loading of aggregate with F.E loader and hot mixing of binder and 2% cement filler with aggregates in approved hot mix plant as per clause 6.5 of manual Transporting the mix material with tipper to paver and laying with sensor paver finisher (as per clouse 507.3.5) to the required level , grades and rolling with vibratory compactor and pneumatic tyred roller 150-250 KN,TP=0.7 Mpa, to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MORTH Specification : Clause -509,112) Grade-II Bitumen @ minimum 6 % of mix with lead up to 1 KM VG-30 grade

Pawati to Faga Ki Dhani Road km 1/600 Earth work in excavation for foundation of structure complete with all lift, dewatering shoring and shuttering etc.including refilling of trenches in 25.mm layers, ramming, watering and disposal of surplus soil within a lead of 1000 metres, as per drawing and technical specfication.[MoRTH Specification : Clause : 304] In hard Soil [MoRTH Specification : Clause : 301] Depth upto 3m

Earth work in excavation for foundation of structure complete with all lift, dewatering shoring and shuttering etc.including refilling of trenches in 25.mm layers, ramming, watering and disposal of surplus soil within a lead of 1000 metres, as per drawing and technical specfication.[MoRTH Specification : Clause : 304] In hard rock (requiring blasting) [MoRTH Specification : Clause :301,302]

Cement Concrete for plain/reinforced concrete in open foundation, any level, complete as per drawing and technical specifications. [MoRTH Specification Section 1700&1500] P.C.C.M15 grade

Stone masonry work in cement mortar 1:3 with mechnical mixer for foundation (any level) complete, including all acaffolding etc., excluding pointing and plastering as per drawing and technical specification. [MoRTH Specification: Section 1000,1400] Random Rubble Masonry

Providing and laying Random Rubble masonry in foundation upto a depth of 1.50 metres and 1.50 metres above Ground /Bed level.[MoRTH Specfication: Clause 1000/1400] Cement sand mortar

Plain/reinforced cement concrete in substructure complete as per drawing and technical specifications MoRTH Section 1500,1700, 2200. RCC Grade M-30 Height upto 5.00m.

Supplying, fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and MoRTH specification section 1600.

Providing and fixing 20mm thick compressible fibre board in expansion Joint complete.

Plastering with cement mortar (1:3) on brick work in substructure as per Technical specifications MoRTH Section 1300,2200.

Back filling behind abutment, wing wall and return wall complete as per drawing and technical specifications clause 710.1.4 of IRC 78 & MoRTH section 2200. Sandy material

Construction of precast RCC railing of M-30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion complete as per approved drawings and MoRTH specification 2703, 1500, 1600, 1700.

Providing and fixing of retro- reflectorised inclusive cautionary, mandatory and informatory sign as per IRC-67 made of high intensity grade sheeting lettering, border & signs fixed over aluminium sheeting, 1.5 mm thick, fixed on mild steel angle iron frame 50mmx50mmx6mm supported on a mild steel angle iron post 75mmx75mmx6mm upto the top of sign board, length of post from bottom of sign board is 2.85m. upto foundation level post duly painted in black & white synthetic enamel. fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 Cm x 45 Cm x 60Cm, 60 cm below ground level as per approved drawing & as per MORTH specification Cl. 801. 80 cm x 60 cm rectangular

Providing and erecting direction and place identification retro - reflectorised sign as per IRC:67 made of high intensity grade sheeting exclusive of lettering, border & signs fixed over aluminium sheeting, 2 mm thick fixed on a mild steel angle iron frame 50mmx50mmx6mm supported on mild steel angle iron post 75 x 75 x 6 mm upto the top of sign board, length of post from bottom of sign board is 2.85 m. upto foundation level post duly painted in black and white synthetic enamel alternate ship 30cm. wide fixed to the ground by means properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60 Cm , 60 Cm below ground level as per approved drawing & as per MORTH specifications clause 801. 120 cm. X 90 cm.

Providing and applying tack coat on the prepared surface ,with bitumen emulsion as per IS : 8887 & manufacturer’s specifications @ 2.75 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI.503,112 ( Including cleaning of Road Surface

Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-18 for wearing course including loading of aggregate with F.E loader and hot mixing of binder and 2% cement filler with aggregates in approved hot mix plant as per clause 6.5 of manual Transporting the mix material with tipper to paver and laying with sensor paver finisher (as per clouse 507.3.5) to the required level , grades and rolling with vibratory compactor and pneumatic tyred roller 150-250 KN,TP=0.7 Mpa, to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MORTH Specification : Clause -509,112) Grade-II Bitumen @ minimum 6 % of mix with lead up to 1 KM VG-30 grade