Public Works Department Tender

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:

Cement Mortar 1:6 ( 1-Cement : 6-Sand).

Brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand )

Stone slab roofing on groung floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand morter 1:4 with cealing pointing in cement sand mortar 1:3 complete as per specification and instruction of Engineer In Charge.

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m ), fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13 mm x 3 mm and 15 cm long embedded in CC block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm follow steel section 15 mm paitam of 18 gauge thickness , jointed mitred and grinded including 10 mm x 10 mm square bars welded to frame for paitam fixing float glass 4 mm thick panes with glazing clips and matel sash putty amd fixing of shutters frames peg stay , U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-In-Charge Window openable.

Extra for additional shutter in pipe section windows with wire gauge 14 mesh x 24 gauge.

Providing and fixing square bars or other flat welded to window ventilatiors etc.

Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour completeincluding all scaffolding as per manufacturer's specification. Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.

Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ).

Painting with synthetic enamal paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Painting with synthetic enamal paint of approved brand and manufacture to give an even shade : Two or more coats on Old work.

Providing and fixing 1st quality MAt finished ceremic tile size 300x300mm confirming to IS : 15622 colour such as white , gray, ivory, fume red brown, light green, light blue and other light shades in floors , steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).

Providing and fixing 1st quality standerd white, grey, ivory, fume red brown , light green , light blue and other light shades glazed tiles confirming to IS : 13753 & IS : 15622 of size 200 mm x 300 mm in walls , floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (eccluding the cost of cement plaster on walls and pillar).

Supplying and fixing in walls machine cut and polished stone shelves , tands and in CM 1:3 with machine cut edge : Kota stone minimum 30mm thick.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement morter 1:3 ( 1 cement : 3 fine sand ) as per standard design.

Half brick masonry in Superstructure above plinth level upto floor V level using bricks of designation 75 Cement mortar 1:4 ( 1 cement : 4 Coarse Sand).

Plaster on new surface on wall in cement sand morter 1:3 including racking of joints etc. complete fine finish : 20nn thick.

Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make Brass 400 gm , 15mm nominal bore .

Providing and fixing T-iron frames for doors , window and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blockas 15x10x10 cm of 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coar of approved steel primer.

Providing and fixing M.S. sheet 1 mm thick single leaf door shutter in angle iron frame 35x35x5 mm suitabilly diagonally braced with 25x3 mm flat iron above and below lock rail of size 50x5 mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anti-corrosive red oxide primer paint.

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. Medium Point Upto 6 mtr

P & F ISI marked (IS:3854) 6 amp. flush type non modular switch with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material ncluding cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in Charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Making of Health Welness Centre pattern (Gola) including colour picture work inside for façade branding incl. material, labour & T&P as per direction of Engineer-in-charge. As per standard drawing / pattern

Making of Border of window for Health Welness Centre as per give pattern for Façade Branding including material, labour & T&P as per direction of Engineer-in-charge. Upto window size 4'x5'6' as per standard drawing / pattern