Public Works Department Tender

Extra for laying earth as per specification for compaction in 200 mm thick loose layers and dressing [MoRTH Specification Clause 305.3.5].BY MECHANICAL MEANS, using Motor Grader, from earth in stock piles with all lead and lift but excluding rolling and watering.

Extra for watering the earth to bring the earth up to required O.M.C excluding rolling

Extra for rolling to specification with power roller 8-10 tonne when earth is at suitable moisture content with desired density excluding watering. Field density not less than 95% of maximum dry density (Modified Heavy Proctor test)

Providing and laying granular sub-base material having P.I. not more than 6 including spreading in layers not exceeding 150 mm compacted thickness and consolidation by 8-10 tonne power roller to required camber and grade including cost of water and hire charges of machinery including T&P with all lead (Compacted thickness to be measured).as per MoRTH specification table 400-1, 400-2, For Grading III Material

Providing and laying brick edging upto 15-19 cm deep and 9 -11 cm wide ( according to approved brick size to be specified) including digging of trenches, fixing bricks in position, refilling and disposal of surplus earth etc. complete

Providing, laying, spreading and compacting stone aggregate having physical requirement as per table 400-8 and of specific sizes as per table 400-9 to Water Bound Macadam specification including spreading in uniform thickness, hand packing rolling with vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening and binding materials to fill up the interstices of coarse aggregates watering (with water browser) and rolling, making necessary earthen bund to protect edges, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404 & 112By Manual Means Grading- II (Using Screening Crushable type such as Moorum or Gravel)Using Screening Crushable type such as Moorum or Gravel

Providing, laying, spreading and compacting stone aggregate having physical requirement as per table 400-8 and of specific sizes as per table 400-9 to Water Bound Macadam specification including spreading in uniform thickness, hand packing rolling with vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening and binding materials to fill up the interstices of coarse aggregates watering (with water browser) and rolling, making necessary earthen bund to protect edges, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404 & 112By Manual Means Grading- III (Using Screening Crushable type such as Moorum or Gravel)Using Screening Crushable type such as Moorum or Gravel

Providing and applying primer coat over prepared surface or granular base with bitumen emulsion SS-1 as per IS: 8887 & manufacturer’s specifications @ 6 kg /10 Sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification CI 502 & 112 (Including cleaning of road surface )

Providing and applying tack coat on the prepared surface, with bitumen emulsion RS-1 as per IS : 8887 & manufacturer’s specifications @ 2 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification Clause 503 & 112 ( Including cleaning of bituminous road surface )

Providing and laying open graded premix carpet 20mm thick (compacted) on prepared surface in a single course as wearing course composed of specified graded crushed aggregates as per Table 500-23, heating bituminous binder @ 14.6 Kg/10 Sqm.(60/70 grade) and aggregates in Hot Mix Plant (including cost of anti-stripping compound , wherever required), transporting the mixed material with tipper and laying with paver finisher to the required level and grade, rolling with power roller, 8-10 tonne but excluding cost of tack and seal coat with all lead .[MoRTH Specification : Clause 510 & 112] In Hot Mix Plant 40-60 TPH, including loading of aggregates with Front end loader bitumen VG 30.

Add extra for adding shreaded Plastic Waste as per guidelines envisaged in IRC:SP:98-2013 over item of Open graded Primix Carpet @ 8% of the quantity of bitumen by weight including mixing of aggregate and plastic waste in hot mix plant ( The bitumen content will be as per respective clause of Morth specification)

Providing and applying premix seal coat type "B" comprising of thin application of fine aggregate (0.06 cum per 10 Sqm) premix with 6.8 Kgs. Per 10 Sqm bitumen binder (Grade VG-30) (including cost of anti-stripping compound wherever required) In mini hot mix plant 6-10 TPH and laying with mechanical paver and rolling with power roller 8-10 tonne including all lead of mix material ( MoRTH Specifications Clause 511)

S & F cut stone including earthwork, cement concrete 1:4:8 engraving letters and numerals, as per IRC standard design: Km. Stone for NH, SH & MDR ( size 35 x110x25 cm)

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 60 cm circular

Supply of direction and place identification sign boards made out of 2mm thick sheet framed to angle iron 40 x 40 x 5 mm and two vertical posts of angle size 65 x 65 x 6 mm, 3 m long with hold fasts, stove enamelled paint and reflective letters,numerals,symbols etc. complete of size :1500 x 1200 mm

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)

Installation of sign boards having the posts like mandantory, cautionary and informatory boards including excavation, fixing of posts in 300 mm dia. RCC hume pipe (IS marked) 1.20 m long, 75 cm embedded in ground, the in side of pipe shall be filled with cement concrete 1 : 4 : 8 with semi-circular hump at top, the pipe shall be painted white with enamel paint including transportation etc. complete. For double post

Construction of foundation/Inaugration pedstal in 35 cm thick brick masonary in CM 1:4 of size 1.40 m x1.80 m above ground level with 0.30m deep foundation in 46 cm thick brick masonry and 0.10m thick PCC 1:3:6 including providing and fixing granite stone of sizr 0.90mx0.60m with engraving letters and figures, 20mm cement plaster in CM 1:4, white washing etc. complete as per direction of Engineer-in-charge

Providing and Electing typing Citizen's Information Board as per approved drawing & specifications of MORD, made of two MS Sheet of 1.6 mm thick each of size 900 mm x 750 mm stiffened by angel iron 25 mm x 25 mm x 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and Horizontal member 900 mm) to be joined by 5 mm thick MS plate at 12 places (65 mm x 50 mm) duly embedded in cement concrete M-15 grade of block of 600 mm x 600 mm x 750 mm size below ground level as per enclosed drawing & as directed by Engineer-In-Charge. All MS will be stove enameled on both side, Lettering, Figureing and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per MORD specification.

Earth work in excavation for foundation of structure complete with all lift, dewatering shoring and shuttering etc. .including refilling of trenches in 25.mm layers, ramming, watering and disposal of surplus soil within a lead of 1000 meters, as per drawing and technical specification.[MoRTH Specification : Clause : 304] In hard Soil [MoRTH Specification : Clause : 301] manual means Depth up to 3m manual means

Brick masonry work in cement mortar 1:4, with mechanical mixer in foundation (at any level) complete, including all scaffolding etc. but excluding pointing and plastering as per drawing and technical specification as per MoRTH Specification : Section 1000,1300

Providing, laying & fixing in position RCC spun or hume pipes ISI marked with proper jointing in required slope packed in the gasket of hume or spun yarn and neatly finished with rich grout of cement moratar 1:3 or having flexible rubber ring joint made with prefectly air and water tight including testing of joints as per MoRTH Specfication : Clause : 1000 & 2900, NP - 3, 600 mm dia

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical specifications

Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)

PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Dismantling upto 1.5m in foundation and/or 1.5m above ground level including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, and stacking serviceable material within a lead of 1000m. [MoRTH Specification clause 202] Dismantling Brick / Tile work In cement mortar

Removal of unservicable soil, blown sand including excavation, loading and disposal upto 1000 m lead.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, , plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days and water finishing to lines and grade as per drawing and Technical Specification Clause 1501using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 for low volume roads