Public Works Department Tender

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).

Repair to cement plaster in cement mortar 1 : 6 (1 cement : 6 fine sand) including removal of old plaster in regular shape and white or colour washing

Finishing with 25mm thick cement plaster on roofs in cement sand mortar 1 : 4 mix including water proofing compound @ 2% of cement used, with neat cement, finishing, curing etc. complete in all respect including making of 300 mm x 300 mm square.

Providing and Fixing at all height all false ceiling of 12.5mm thick tapered edge Gypsum board conforming to IS : 2095 including providing and fixing of frame work made of special section power pressed from M.S sheet and galvanized in accordance with zinc coating 600 as per IS : 277 and consisting of angle cleats of 25 mm wide x 16mm thick with flanges of 22 mm and 37 mm at 1200mm center to center one flange fixed to the ceiling with dash fastner 12.5mm dia x 40mm long with 6mm dia bolts to the hangers of 25x25x0.5mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45mm x 15mm x 0.9mm runnimg at the rate of

1200mm center to center to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm center to center shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm dia x 230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450mm center to center with 25mm long drive-all screws.also including the cost of making openings for right fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specifications and direction of the Engineerin-charge but the excluding the cost of painting.

Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).

Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. Welded mesh 25 x 25mm x 16 gauge

Providing and fixing of T-iron / angle iron frames for doors windows and ventilators or mild steel tee or angle sections joints mitred and welded with 15X3mm lugs, 10cm long embedded in cement concrete blocks 15X10X10cm. Size of 1:3:6 (1cement : 3 courses and : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or raw plugs and screws or with fixing clips and screws or with bolt and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approvad steel primer.

Brick masonry for superstructure upto third storey with bricks of class designation 75 in : cement mortar 1:6 (1 cement : 6 coarse sand).

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 35 mm thick . Commercial Veneer both side

Providing and fixing M.S. sheet single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint M.S. Sheet 20 S.W.G

Applying Birla / JK white cement based putty over cement plaster surface for making even surface.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding : old work (one or more coats) including scrapping surface and necessary repairs. Colour Change

Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding : old work (one or more coats)

Painting with enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing of P.V.C. door frame made from extruded PVC Confirming to IS : 10151-1982 section having multi chamber cross section with a maximum wall thickness of 2.8mm ± 0.3 mm duly reinforced with steel tie rod at bottom, and weather seals complete : P.V.C. door frame section (53 x 60mm)

Providing and fixing to existing door frame 30mm thick factory made Polyvinyl Choloride (PVC) door shutter made of styles and rails of a UPVC hollow section of size 60x30mm and wall thickness 2mm ± 0.2mm with inbuilt decorative moulding edging on one sides. The styles and rails mitred and jointed at the corners by means of M.S. galvanised / plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless of size screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20mm and 1mm ± 0.1mm wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100x30mm and 2mm ± 0.2mm wall thickness fixed to the shutter style by means of plastic / galvanisd M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620mm, having over all thickness of 20mm and 1mm ± 0.1mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufactur's specification and direction of Engineer-in-charge including all door fittings such as Hinges, L-drop, Handles, Locking bolts etc. as per approved of Engineer-in-charge.

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm

Providing and fixing vertical blinds , made out of non woven polyester fabric 85 to 90 mm wide of approved shade & design with power coated aluminum channel minimum 1”x1” system including cording set etc. complete as per specification & direction of engineer- in –charge

Providing & laying Chequered plain cement concrete embossed o specially manufactured non-slipping tiles of approved make 20mm thick laid on 20mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete.

Providing and fixing Polyethylene - Aluminimum - Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply with all compression type composite internal seal fittings (e.g. elbows, tees, reducers, couplers connectors etc.) including trenching & refilling the same etc. (External work) 1216 (16mm OD) pipe

(a) 1216 (16mm OD) pipe

(b) 2025 (25mm OD) pipe

P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor

P & F water closet Seat Covers with brass hinges complete : Solid PVC (ISI marked) grade-I white for EWC.

P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.

P & F bib cock (IS : 8931 Mark) of superior quality and approved make : CP Brass bib cock, 15mm nominal bore.

P & F 15mm. Dia Connection Pipe of approved quality/make PVC pipe with C.P. Brass nuts upto length 370mm

P & F inlet connection (Angle valve) superior quality of approved make for wash basin , gyset etc. C.P. Inlet connection 15mm. Brass (15:8931 marked).

P & F WVC wash basin (Ist quality, I.S. : 2556 mark) of approved make with C.I. Brackets duly painted, 1 no. 15mm C.P. pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25mm G.I. Waste pipe complete including cutting & making good the wall : Size 550x400mm

P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.

P & F Flush Cock / Flush Valve (IS : 9758 Mark) For WC of approved quality make. CP brass push type 15mm nominal bore.

P & F Towel Rail or Ring of approved quality/make: C.P. brass Towel Rail elbow type with concealed screws size 450mm (Heavy duty).

P & F Soap Dish or Tray of approved quality/make WVC (1st Quality, ISI Marked) recessed size 150 x 150 mm.

P & F PVC storage Tank (IS : 12701 marked indicating the BIS license No.), of approved make with cover, 25mm dia 1M long G.I. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design : 500 litres capacity.