Public Works Department Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Public Works Department - PWD Tender
Civil Works Buildings
Eprocure
Opening Date24 Feb 2020
Closing Date4 Mar 2020
Tender Amount₹ 1,97,50,000
Costs
EMD
₹ 3,95,000Document Cost
₹ 2,000Tender Fee
₹ 1,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_CEPWD_178822_2Bid Award Id
ViewTender No
NIT_17_2019_20_EE_ED_BNWTender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://pwd.rajasthan.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Long point (up to 10 mtr..)
1008
-
508
Add 8% for using FRLS PVC copper wire of group-1
1
-
-
Wiring of twin control light point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box of 20 SWG with earth terminal, 6 A two way Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required.
-
-
-
Medium point (up to 6 mtr.)
15
-
381
Long point (up to 10 mtr..)
15
-
514
Add 8% for using FRLS PVC copper wire of group-1
1
-
-
Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required.
-
-
-
On board
305
-
244
Long point (up to 10 mtr..)
175
-
571
Add 8% for using FRLS PVC copper wire of group-1
1
-
-
S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required.
-
-
-
20 mm
4300
-
32
25 mm
4800
-
42
32 mm
4500
-
65
40 mm
445
-
81
S&F following sizes (dia.) of ISI marked ( IS:9537 P - II ) rigid steel conduit along with accessories in surface / recessed using saddles, clamps, fastener pvc bushes, check nuts, as required including cutting the wall and making good the same as required.
-
-
-
20 mm
3870
-
94
25 mm
1000
-
120
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.
-
-
-
1 x 1.5 sq.mm
1800
-
14
2 x 1.5 sq.mm
4870
-
26
3x 1.5 sq.mm
2800
-
40
2 x 2.5 sq. mm. + 1x1.5sqmm
7990
-
53
1x 4.0 sq.mm
70
-
30
2 x 4.0 sq.mm
1250
-
57
2 x 4.0 sq. mm. + 1 x 2.5 sq. mm.
3200
-
77
2 x 6.0 sq.mm
1250
-
89
4 x 6.0 sq.mm
1250
-
176
4 x 10.0 sq.mm
1250
-
305
2 x 10.0 sq.mm
50
-
154
4 x 16.0 sq.mm
50
-
513
Add 8% for using FRLS PVC copper wire of group-1
1
-
-
Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS -113C of approved make in existing surface or recessed conduit/casing capping.
-
-
-
Unarmoured Telephone cable in existing surface or recessed conduit/casing capping.
-
-
-
2 pair
5900
-
13
5 pair
850
-
25
10 pair
500
-
54
20 pair
265
-
91
P & F Krone module with base frame in the recess / surface made out of 16 SWG sheet steel box, front openable, having locking arrangements duly powder painted.,including dressing, ferruling and punching of telephone cable with krone tool etc. as required.
-
-
-
10 Pairs
20
-
681
20 Pairs
4
-
987
100 Pairs
2
-
3947
Jelly filled armoured (PIJF) Armoured telephone cable including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.
-
-
-
50 pair
160
-
442
P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required.
-
-
-
2.5 Sq.mm 3 core flat / Round
450
-
90
4.0 Sq.mm 3 core flat / Round
250
-
128
Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular box of 20 SWG on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.
200
-
538
P & F 18 SWG Sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required.
-
-
-
200mm x 250mm x 75mm
15
-
101
300mm x 100mm x 60mm
15
-
83
P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/ frames including making holes for switches etc, with brass screws, washers/ zinc plated nut and bolts as required.
-
-
-
3.0 mm thick
4
-
680
P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. GROUP- A1
-
-
-
Single pole MCB
-
-
-
6 A to 32 A rating
768
-
166.1
Double pole MCB
-
-
-
6 A to 32 A rating
6
-
441.1
Triple pole MCB
-
-
-
6 A to 32 A rating
30
-
756.8
40 A 63 A rating
30
-
1137.4
Four pole MCB
-
-
-
6 A to 32 A rating
30
-
1009.8
40 A 63 A rating
20
-
1515.8
P&F 240/415 V Residual current circuit breaker conforming to IS:12640:1988/ IEC 61008 on existing board/sheet including making connections, testing etc. as required. GROUP- A1
-
-
-
Two pole 100/300mA sensitivity
-
-
-
40 A rating
6
-
1959.1
Four pole 100/300 mA sensitivity
-
-
-
40 A rating
20
-
1781
Four pole 100/300 mA sensitivity
-
-
-
63 A rating
20
-
2654.3
P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. GROUP- A1
-
-
-
Double door (single phase)
-
-
-
8 Way
6
-
987
Double door (Three phase)
-
-
-
4 Way
30
-
2002
6 Way
20
-
2277
P&F flush/surface type enclosure for housing MCB/Isolator with Din rail including making connections with lugs, repairs etc. as required. GROUP- A1
-
-
-
With sheet steel enclosure
-
-
-
Three way
6
-
335.5
P&F recessed/ surface mounting heavy duty Vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCCB and SP / TP MCB as outgoing , phophatised ,powder painted complete with insulated suitable rating copper bus bar , neutral link, earth link and din bar, masking sheet & conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. GROUP- A1
-
-
-
Double door with Provision of Incomer MCCB 100 / 125 A Rating
-
-
-
4 Way
5
-
4998.4
6 Way
7
-
5643
P&F recessed mounting heavy duty sheet steel End Box for distribution board duly phophatised powder coated complete as required. GROUP- A1
-
-
-
For TPN 4 way DB
50
-
495
For TPN 12 way DB / all VTPN DB
12
-
1485
P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required.
15
-
20
P & F ISI marked 6 amp bakelite unbreakable 3 pin plug top including making connection testing etc. as required.
25
-
30
P & F ISI marked 16 amp bakelite unbreakable 3 pin plug top including making connection testing etc. as required.
25
-
45
P & F ISI marked flush/surface type buzzer including making connection testing etc. as required.
8
-
50
P & F ISI marked single tone electronic call bell including making connection testing etc. as required.
8
-
225
P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required.
-
-
-
1-2 Module
553
-
40
5-6 Module
90
-
82
10-12 Module
225
-
130
P & F following size mounting grid plates with cover plates
-
-
-
1/2 Module
553
-
69
5-6 Module
90
-
109
10-12 Module
225
-
161
P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required
-
-
-
2 pin Telephone socket
165
-
138
T.V. coaxial socket
34
-
103
Blanking plate
350
-
19
32 Amp. 2 Module switch With Indicator
10
-
285
25 Amp. 2 Module Socket
10
-
194
5 step fan regulator 2 Module
425
-
460
SITC of quick make and quick break 3 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push ( test ) to trip , including making connections with lugs & spreaders, etc. as required.
-
-
-
With Thermal Magnetic release
-
-
-
250 Amp, 35 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu
2
-
14900
SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push ( test ) to trip , including making connections with lugs & spreaders, etc. as required.
-
-
-
With Thermal Magnetic release
-
-
-
up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu
10
-
6341
up to 125 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu
12
-
7800
160 Amp, 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu
2
-
9095
200 Amp , 25/35kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu
1
-
16210
250 Amp , 35kA, adjustable O/L & adjustable S/C setting, Ics = 100 % Icu
2
-
18989
630 Amp , 35kA, adjustable O/L & adjustable S/C setting, Ics = 100 % Icu
2
-
31185
S&F off load change over switch four pole/2 pole, 230/ 415 V ,conforming to IS:13947 P-III in sheet steel enclosure complete with connections with lugs, testing etc. as required in the following rating:
-
-
-
630 A four pole
1
-
26824
SITC of Fixed / Draw out type 4 pole Air Circuit Breaker conforming to IS 60947 P - 2 in existing LT panel suitable for LT installation 440 V, 50 Hz and having adjustable over load short-circuit, earth fault and microprocessor based release with separate LED indication for each type of fault ,LCD display , Thermal memory at least 4NO & 4NC auxiliary contacts safety shutter and fault position acknowledgement mechanism . type ACB shall have separate indication for service, test, isolation, maintenance position, Breaking capacity Icu = Ics = Icw ( 1 sec ), Uimp - 12 KV, including making connections etc. as required.
-
-
-
Draw out type (Manual spring charged)
-
-
-
1250 A Rating ,50kA
1
-
162852
P & F push button actuators and integral contact block of dia. 22.5 mm including making connection etc. as required.
-
-
-
Luminous type Red , Yellow, Green, Amber
18
-
171
Luminous type Blue , white
18
-
298
Supply and fixing of following accessories for MCCB
-
-
-
Direct Rotary Handle
31
-
1602
SITC of wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet , required hardware ,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear . Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator). Interconnection between busbar and swithgeard/cable/shall be rigidy supported and made out by flexible copper wires (up to 125 amp) and by solid bus bar(125amp) All joints/interconnections of copper busbar shall be dully tinned. Clearence between main bus bar and risters/metal parts shall be at least 10 mm additional to width of bus bar. Bus Bar is insulated by heat shrikable sleeves earth and neutral by heat of the size of phase bus bar.
46
-
2752
Supplying and fixing of Aluminium / Copper bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves.
-
-
-
Electrolytic grade Aluminium bus bar
152
-
420
SF of Current Transformer , with all necessary support in existing panel including connection etc. as required .
-
-
-
from 200 / 5 to 400/5 Ratio , 10 VA , class 1 accuracy
6
-
323
from 500 / 5 to 1600/5 Ratio , 15 VA , class 1 accuracy
6
-
397
P & F of Multy function meter with LCD/ LED display capable of measuring electrical parameters like V, I, F, PF, KW, Kva, Kvar, Kwh, Kvah, Kvarh display with 1A/5A CT input for LV/ HV network, RS 485 communication port etc. complete in all respect.
2
-
17242
S & F of Electrical insulating rubber matts confirming to IS: 15652 / 2006 with one side anti skid abberation marks and pasting the mat with synthetic rubber adhesive as required.
-
-
-
11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break Down Voltage 45 KV
20
-
2300
SITC of self healing MPP/MP type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than 0.0025 at 50 Hz and total wattage loss less than 0.5 Watt per KVAR . including making connections with suitable capacity conductors/cables testing etc. as required.
-
-
-
Heavy duty Three phase 440 V , 50 Hz capacitor (Bank)
150
-
546
SITC of microprocessor based three phase sensing power factor correction relay having following sensing capacity secondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall have digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like KW, KVA, KVAR, metering facility as required.
-
-
-
6 to 8 stage
-
-
-
sensitivity up to 50 milli Amp
1
-
17205
SF of 110/220 V, LED (22.5 mm dia ) Indicating lamp with integral circuit, terminal block, including connection etc. as required.
-
-
-
Red/yellow/Green colour
15
-
150
Blue colour
6
-
250
P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required.
-
-
-
Triple pole Isolator
-
-
-
30 A / 40 A rating
5
-
458
63 A rating
2
-
545
100 A rating
1
-
660
P & F of 440 Volt 3 pole capacitor (AC 6 B ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current , conforming to IS:13947-4-1/IEC:947-4-1, Din rail mounting type including making connections, testing etc. as required. suitable for following capacity capacitor bank.
-
-
-
up to 6 KVAR
2
-
1100
7 to 10 KVAR
3
-
1450
30 KVAR
2
-
5257
50 KVAR
1
-
7890
P&F of removable Voltage surge protection device (surge arrester) for protection against transient over voltage (8/20 micro -seconds) and to run current waves to ground, making connection, testing etc. as required. ( Imax=40 kA, Up= 1.2kV, Uc=275 volts )
-
-
-
Triple pole & neutral
8
-
8622
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.
-
-
-
10.0 Sq.mm (external)
-
-
-
4 core
350
-
170
25.0 Sq.mm (Lift m/c rooms)
-
-
-
4 core
100
-
222
35.0 Sq.mm (Lighting VTPN DB)
-
-
-
3.5 core
100
-
252
50.0 Sq,mm (Power VTPN DB)
-
-
-
3.5 core
100
-
636
150.0 Sq.mm (Fire Panel & CCP-1&AC pannel)
-
-
-
3.5 core
250
-
735
500.0 Sq.mm (Rising mains-L&P)
-
-
-
1 core
900
-
715
630.0 Sq.mm (DG SET-380KVA)
-
-
-
1 core
360
-
884
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with Copper conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.
-
-
-
1.5 Sq.mm
-
-
-
8 core
50
-
223
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.
-
-
-
4 x 10.0 sq.mm
4
-
63
4 x 25.0 sq.mm
2
-
11
3.5 x 35.0 sq.mm
6
-
119
3.5 x 50.0 sq.mm
6
-
132
3.5 x 150.0 sq.mm
6
-
328
Supplying and making end termination with heavy aluminium lugs ( Pin / ring type ) duly crimped with crimping tool, PVC tape etc of following size.
-
-
-
500.0 Sq.mm
16
-
160
630.0 Sq.mm
16
-
185
P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia.
-
-
-
50/55 mm
450
-
100
90 / 76 mm
260
-
150
Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.
-
-
-
With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating
-
-
-
GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip
18
-
6150
GI pipe 2000 mm long ,63 / 80mm, Inner strip 50 mm x 3 mm copper
7
-
8970
Add Extra for Gel / Pipe earthing in Rocky Strata for making pit by Boring machine
25
-
1000
P & F testing joint, made out of 20mm x 3mm copper Strip, 125 mm long, with 4 no. tinned brass bolts, nuts, checknuts, spring washer etc. complete as required.
25
-
250
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
-
-
-
10 SWG copper. Wire
600
-
46
25mm x 5mm copper strip
40
-
785
32mm x 6mm copper strip
35
-
1174
25mm x 6mm Alum. Strip
380
-
154
32mm x 6mm Alum. Strip
165
-
198
S & Laying following size' B ' class G.I. Pipe confirming to IS : 1239 P - 1 ( 1990 ) with accessories for laying earth conductor/strip / cable in ground/surface/recess as required
-
-
-
32mm dia
15
-
234
50 mm dia.
20
-
358
80 mm dia.
30
-
554
100 mm dia.
50
-
667
P & F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.
-
-
-
900 mm sweep
20
-
1367
1200 mm sweep
425
-
1451
P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .
425
-
95
P & F of ventilating fans, Capacitor start, single phase with PVC impeller, ABS body, automatic openable louver shutter in existing opening including making connection, testing etc. as required.
-
-
-
200 mm sweep
10
-
1416
250 mm sweep
10
-
1546
P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required.
-
-
-
300 mm sweep(900/1400 RPM)
71
-
3002
450 mm sweep(900/1400 RPM)
3
-
5349
P & F of Gravity Louver shutter of superior quality made out of frame of 18 swg M.S. sheet & Louvers made from 24 swg MS Sheet with enamel paint including cost of nuts, bolts, etc as reqd.
-
-
-
above 380 mm size
3
-
225
P & F of Gravity Louver shutter of superior quality made out of PVC including cost of nuts, bolts, etc as reqd.
-
-
-
Up to 380 mm size
71
-
169
P & F of capacitor start, metal body, metal blade three speed wall mounting fan of following sweep with the help of anchor bolts including making connection testing etc. as required.
-
-
-
400 mm sweep(Oscillating type)
20
-
2384
P & F of IP20 LED Recessed / Surface Mounted,Round / Square Non DimmableDownlight with diecast aluminium housing & Heat Sink for heat dissipation, high purity reflector with external BIS certified 2.5 KV surge protected driver having efficiency 85% and in compliance toIEC standards.System lumens efficacy of = 100 lm/watt and life time of minimum 35000 Burning hours with 70% of initial lumen maintained,CCT 3000*K / 4000*K / 6000*K, maximum power consumption should not more than the specified rating and Fixture shall be of CE complianed.
-
-
-
Recessed Mounting
-
-
-
LEDDownlight 14/15 Watt
90
-
934
LED Downlight 18/20 W
620
-
992
Surface Mounting
-
-
-
LEDDownlight 12 Watt
20
-
757
LEDDownlight 18/20 Watt
100
-
947
P & F fluorscent tube fitting fabricated from prephosphated and powder coated CRCA steel channel with coloured ABS end caps complete with accessories like Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required( without tube).
-
-
-
1 X 18 Watts EB
60
-
506
P & F of 36 Watt IP 20 LED 2'x2' fixture, Recessed / surface type, having efficacy of not less than 100 lumen / watt, made out from CRCA housing and with high purity /
transmisvity duffuser for uniform light distribution high efficiency driver electronics and in compliance to IEC standard (integral with light fixture), life time of more than
50000 burning hours, CCT 6000K (minimum), CRI80 driver maintaining PF0.9
100
-
3950
P & F Fluorscent tube rod in existing fixtures as required,
-
-
-
Flourscent powder coated (minimum 3 star rating)
-
-
-
18/20 Watts
60
-
59
Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , Painting etc. as required.
450
-
84
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
-
-
-
M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
4
-
3881
M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size).
4
-
5240
Plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish :
-
-
-
20mm thick
100
-
198
Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed:
5
-
198
Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:
-
-
-
Cement Mortar 1:6 ( 1-Cement : 6-Sand).
5
-
2554
SITC of Auto main failure (AMF) Panel fabricated from CRCA sheet steel 2 mmThick , Powder coated finish , Engine Start & Stop commands, control Relays , selector switches for Ammeter & Voltmeter, Ammeter & Voltmeter , Control & Power Contactors, Timers, Electronic Hooter ,Visual & Alarm indication for faults, UPS, operator interface panel complete in all respect suitable for following capacity DG sets:
-
-
-
PLC Based:
-
-
-
320 to 500 KVA
1
-
281250
S/F of DG Set Exhaust Piping insulation on 80 mm to 150 mm Dia. MS Exhaust Pipe
-
-
-
Rock /Glass wool with 22 g Aluminium cladding (Density- 96 kg/m3, Thickness-50 mm)
22
-
1350
Supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size.
-
-
-
50mm x 50mm x 3.15mm
100
-
630
P & F of IP 65 protected high power LED Flood light system with pressure die cast aluminum housing with heat dissipation fins on housing touhened glass diffuser with suitable lences on LED's to achieve various beam angles,240 Volts,50 Hz, of high power LED fixture supplied with prewired cable of one mtr.Integrated driver shall be high efficiency having efficiency more than 85% and in compliance to IEC standard / BIS certified. The system lavel luminaire efficacy= 100 with High power LEDs of cree /Nichia/Osram/Philips/Seoul make is to be used. LED Driver input voltage AC 110 to230 V AC with autoresetting Safety cut-off. Input frequency 50 Hz +- 3% power factor 0.95 Driver Efficiency85%, control gear Integral design, THD (I) 10%,Electrical connector must be provided ,Surge protection Min= 5KV internal and 10 KV external in 80W onwards,Humidity 10% to 90% RH working Temp -20*C to 50*C . LED luminaire Specifications : Life Expectancy Equal or more than 50000 burning hrs with minimum 70% lumen maintenance. Manufacturers Word Mark / Name Engraved / Embrosed on die cast housing to allow traceability / authenticity till life of fixture.Fixtures shall be CE complianed.
-
-
-
High Power LED Flood Light 40W
4
-
4053
High Power LED Flood Light 100W
4
-
7830
P & F of IP 65 protected high power LED street light luminaire on existing bracket.Fixture made of powder coated single piece pressure die cast aluminum with heat dissipation fins on housing with UV stablized PC/Toughened glass cover (from 45 W onwards) and should be secondary lens on each LED. The system lavel luminaire efficacy= 100 with High power LEDs of cree /Nichia/Osram/Philips/Seoul make is to be used.The LED Driver shall be BIS certified and input voltage AC 110 to270 V AC with Input frequency 50 Hz +- 3% power factor 0.95 Driver Efficiency85%, THD (I) 10%,Humidity 10% to 90% RH working Temp -20*C to 50*C, Life Expectancy Equal or more than 50000 burning hrs with minimum 70% lumen maintained ,,Rendering index 75%.Surge protection shall be Min= 5KV internal and 10 KV external Manufacturers Word Mark / Name Engraved / Embrosed on die cast housing to allow traceability / authenticity till life of fixture.Fixtures shall be CE complianed.
-
-
-
LED Street Light Fixture 30W
15
-
2385
LEDStreet Light fixture 100 Watt
20
-
8503
Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required
11900
-
36
Supply and erection of GI Octagonal / Conical pole of following length and dimension as per table E-10 with base plate on the cement concrete foundation of M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS: 1367 P III ). The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning.
-
-
-
Octagonal MS Poles made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. (See Table E - 10 for specs.)
-
-
-
8 Mtr.
20
-
12300
Providing and fixing of IP 65 protectd Polycarbonate / Polysterene fuse box moulded with inside knock outs of following size with hinged cover, transparent window, PU gasket, locking arrangement, duly holded with 2 nos. pole clamps of 20 mm x 3 mm flat with nut and bolts, complete with The box shall be provided with Din rail, 4 / 8 way 10.0 / 16.0 sq.mm heavy duty connector, earth terminal, complete in all respect.
-
-
-
160 mm X 225 mm X 100 mm
20
-
1500
SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect.
-
-
-
150 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively.
-
-
-
7.5 HP, 3-Ø, (65-135)Mtr, (240-115)LPM
2
-
28980
SITC of ISI mark( IS:8472) Centrifugal monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 2880/ 3000 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively.
-
-
-
2.0 HP, 1-Ø, (8-16)Mtr, (650-225)LPM
1
-
10362
Supply and fixing of Oil / Air break Starter panel made out of sheet steel powder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors.
-
-
-
For Three phase Submersible / Mono block pump
-
-
-
3.0 HP to 10.0 HP ( Star / Delta )
2
-
7850
P & F extra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd.
250
-
89
SITC of self contained drinking water cooler with energy efficient hermetic sealed type compressor, non cFC refrigerant suitable for operation on230v/1pH/50Hz ac supply, Full stainless steel [S304)body and tank, stainless steel water tray, minimum two nos faucets and suitable drainage system complete in all respect with 300mm height MS fabricated and painted plateform. complete in all respect of the following capacity
-
-
-
cooling capacity 150 Ltr./Hr. and storage capacity 150 Ltrs
10
-
59700
SITC of RO water system with Filtration stage = Particilate filter-Membrane life enhancer filter - sediment filter - Pre carbon filter -RO Membrane filter - Post carbon filter, Input power Rating - 230 v AC , 50 HZ, Percentage of Rejection TDS - 90% or better having following features (a) Double purification by RO with ESS or latest technology with TDS indicator.(b) Spin welded RO Membrane Housing to prevent tempering. (c) Push fit components for leak proof performance (d) Fully automatic operation with auto start and auto off. (e)SS/ABS construction for corrosion free lifespan. (f) Equally suitable for water from all bore wells, overhead storage tanks, water tankers and even municipal taps.(g) RO Membrane Flushing - Auto Flush @ Every Start , Every Stop and every One Hour of working for one minute. complete in all respect with following capacity
-
-
-
Purification capacity- 50 LPH, Duty Cycle 270-500 liters/dav
10
-
56600
P & F energy efficient / energy saving 9 Watt IP 20 LED Bulb cool white, in existing holder / fixture as required, minimum 900 Lumen output, 25000 burning hours, CCT 5700 K or 6500 K ( as per direction of Engineer incharge), ANSI, Lamp efficacy minimum 100 lumen/Watt, CRI 80, Driver efficiency 85%, PF 0.95 at full load/ 230 volt AC.
15
-
83
Supply, Fabricating & installing following sizes of powder coated perforated M.S. cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders, fastners, supports etc. as required.
-
-
-
Add extra @15% if GI Cable tray used in place of MS Cable tray
-
-
-
150mm x 50mm x 1.6mm
160
-
310.5
300mm x 50mm x 1.6mm
35
-
486.45
450mm x 50mm x 2.0mm
20
-
698.05
P & F of 4 star rated vertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P./ Flexible alloy connection,testing etc. as required.
-
-
-
15 Ltr.
17
-
7532
Providing, laying, testing & Commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same.
-
-
-
150 mm dia
32
-
2015
Supply & fixing of Faceplate for Flush / Surface Mount Information Outlets Single Aperture with screw hole covers & Icon Tree Size 86mmX86mm
-
-
-
Single Aperture
220
-
98.4
Supply and Installation of Information outlets made of high impact plastic body ABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Cat 6 application complying to latest ammendments EIA/ TIA 568 B.2-1 Specifications in existing modular /MS Boxes along with necessory connections as required
220
-
380
SITC of Managed Layer-2 Intelligent Ethernet Switch providing 24 x 10/100 Fast Ethernet ports and with min 2 SFP Giga Ports (provision for Fiber Giga connectivity) with related LAN Base Software
11
-
41000
SITC of Managed Layer-2 Intelligent Ethernet Switch providing 24 x 10/100/1000 Fast Ethernet ports and with min 4 SFP Giga Ports (provision for Fiber Giga connectivity) with provision of minimum Stacking of 06 Switches with related LAN Base Software
1
-
130000
Supply , Installation, Testing and Comissioning of Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, one Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable
-
-
-
6 U(44 mm ) wall mounted
16
-
9000
9 U(44 mm ) wall mounted
1
-
10500
Supply , Installation, Testing and Comissioning of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS chasis , powder coated Modular Patch Panels with collapsible shutters on jacks to support latest ammendments of TIA / EIA Cat 6 Specifications in Existing Communication Rack along with necessary connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps.
-
-
-
24 Ports
16
-
7400
Supply , Installation and Testing of 4 pair , 100 Ohm, 24 AWG , Cat 6 UTP, flexible , Double ended Patch Cords along with 2 No of RJ 45 connectors with strain relief transparent boots as per TIA /EIA 568 B.2-1 Specifications.
-
-
-
1 Mtr/3 ft
220
-
250
2 Mtr / 7 ft
220
-
290
SITC of 10/100 MBPS Unmanaged Switch
-
-
-
16 Port
5
-
5500
Supply , Drawing and Testing of outdoor singlemode [ 9 micron ] glass Fiber Optic cable as per latest ammendments of TIA /EIA 568B.3 , GR 409 CORE / UL listed NEC 770 Standards in existing MS/PVC Conduits/ slotted channels with ferruling at both ends for identification.
-
-
-
6 fiber
225
-
120
SITC of SFP,LC connector LX Giga Transceiver (for Single Mode Fiber)
2
-
39000
Fiber Fusion Splicing with OTDR Testing of Fiber Single/ Multi mode (per splice) of glass Fiber Optic Cable
12
-
700
Supply. Installation, Testing and Commissioning of 1.8 KVA Pure Sinewave horne UPS /Inverter with 2 numbers 150 AH tubular Battery for backup. with following specifications :- Specification Rating- 1.8 KVA Technology-DSP Pure Sinewave Technology-DSP Pure Sinewavel/P V- 120-28OVAC (lnverter Mode), 180V-250VAC (UPS Mode) O/P voltage-220VAC Voltage Regulation:- +/- 5% (On Batt. Mode) Technology-DSP Pure Sinewavel/P V- 120-280VAC (lnverter Mode), 180V-250VAC (UPS Mode) O/P voltage-220VACVoltage Regulation:- +/- 5% [On Batt. Mode) O/P frequency:- 50 Hz +/- 1 Hz (Battery Mode) Over load capacity:- 11-0 % for 5 min. on mains mode Efficiency:- Better than 92% Charging current :-A/10A/12A/15A/20A/25A (Programmable) D.C. Voltage:- 24V AH capacity:- 3600VAHlndications:-Mains On, Inverter On, O/L, Low Battery, Battery Charging Protections:- Rev Phase, S Ckt, Over Temp, O/L, Battery Loose Relative Humidity:- 95% RH Non-condensing operating Temperature:-0-50deg.c Safety Standards:-lEC/EN 60950EMC Std:-lEC-EN62040-1,, EN62040-2, EN62040-3, EN61000-4, EN60146 Certificates:- IS0 9001,ISO 14001,ISO 18001,ROHS & CE
5
-
37900
Supply, installation, Testing and Commissioning of IP-65/ROHS/CE compliant Integrated Solar Street light fixture having die cast Aluminium body encases with integrated monocrystaline solar PV panel with lithium(liFeP04) ferro Phosphate battery and compliant to MNRE specifications / BIS approved .Iuminaire should be with secondary optic lenses for better distribution with delivered efficacy of 100 Lumens per Watt ,with minimum 40000 hrs. rated Lamp life with LED's brand of Philips/Osram/Nichia/Cree/Seoul and driver efficiency should be 85% t CRI 75, CCT6000 to 6500·K, Microcontroller based high efficiency controller cum driver designed with automatic dimming function with PIR motion sensor ( full power lighting when a human move in the sensor range and only 30% lighting when a human move out) , Dusk to Down operation, working temperature (-) lO·C to (+) 55·C, with adjustable clamp suitable for pole/wall mounting complete in all respect with protection like short circuit, overload, reverse polarity and battery protections. light coverage must be 120 Degree or greater complete as required.
-
-
-
Compact Solar LED Street Light-60 Wp(mono)18V/12.8 V 27 AH/40 W
10
-
26333
SITC of star rated Copper wound distribution Transformer of following rating 11/0.433KV Delta- Star Connected, Vector Group Dyn 11, as per BEE star level- 2 & BISapproved with losses as defined as per IS 1180 part I 2014. including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cableboxes, Off -LTC(+5% to - 10% @ 2.5%) winding temperature rise of 50/55 degree C, 151 marked drain valve, Dial type Temperature gauge, first fill of oil, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer. ( Transformer Should be CTLTested, w/o any extra cost)
-
-
-
630 KVA
1
-
1050308
SITC of Silent DG Set (As per latest CPCBemission norms) complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled. Alternator shall be self regulated with standard Alternator Protection( Over voltage, over speed & under voltage, under speed warning & shutdown). Engine shall have residential silencer (isolated from main DG chamber), up to 3 M exhaust piping (with insulation & cladding), electronic governor, Manual & electric Start ,Batteries, Engine instruments panel, AVM and with Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mmCRCAsheet steel (structure) with side wall fabricated from 1.6 mm CRCAsheet & filled with 100mm thick glass wool (96Kg/m3)/Foam. as per IS 8183 the doors of 100 mm thick and fabricated from 1.6mm CRCA sheet packed with accoustic material, All doors/ opening are sealed with neoprene/EPDN gaskets.
-
-
-
The enclosure has built in fuel tank, with protection and tripping of DGset against temperature of more than 50 degree centigrade. All controls for operation of DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring & control system, MCCB/ACB of suitable rating, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter, Ind.lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level shall be less than 75 dBA at a distance of 1 Mtrs. duly certified by authorised agency etc. complete in all respect of following capacity:
-
-
-
Radiator Cooled & Turbo Charged lAC
-
-
-
380 KVA at 0.8 pf 415V 50Hz 3-ø
1
-
2910521
SITC of 11 KV, 400/630 A, 20kA / 3 sec, Out door Extensible type Ring main unit (RMU) in suitable RCC foundation with 2 no. Load break switch & 1 no. VCB / SF6 circuit breaker with over load, Earth fault, short circuit relay, copper bus bar, ring core protection & metering CT, Auxiliary relay for WTI, OTI ,Bucholz alarm & trip along with annuciator panel, master trip relay, mechanical ON / OFF / Earth indication, Voltage presence indicator, Shunt trip coil, 24 V DC power pack, Digital multi function meter, with Bus PT panel with 3 Nos single phase voltage transformers of the ratio 11kV/√3 / 110 V/√3, 25 VA, Class 1.0 with HT fuses in the primary and MCB on the secondary side, Voltmeter with selector switch, R Y B phase indication. etc. as required, Anti reflex operating handle, right angle boots etc. as required.
1
-
476400
P & Laying XLPE insulated IS:7098/II/85 of Group1 and approved make H.T.cable for working voltage 11 K.V.Earthed direct in ground including excavation of 30cmx100cm size trench, 25cm layer of river sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size.
-
-
-
3 core 50.0 Sq.mm
80
-
664
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of Group1 and approved make suitable for XLPE insulated 11 KV / 33 KV cable, with required components, prepration of cable ends,testing etc. as required of following sizes .
-
-
-
11 KV End Termination Kit Indoor type
-
-
-
3 core 35/50 Sq.mm
2
-
4200
11 KV End Termination Kit Outdoor type
-
-
-
3 core 35/50 Sq.mm
2
-
5200
Note:- In the said building some conduit work has already been done and paid . Recovery of full amount paid will be done from the bill agaist this work oreders
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements