Public Health Engineering Department Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 2,00,000Document Cost
₹ 5,000Tender Fee
₹ 1,500
Summary
Rate Contract Of Supply, Laying, Jointing, Testing And Commissioning Of Various Type And Size Of Pipe Lines ,supply Installation And Testing Commissioning Of Pumping Machinery And Other Work Under Jurisdiction Of Phed Division Salumber With 12 Month
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PHCJA_455794_1Tender No
NIT NO 63/2024-25Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://https://phedwater.rajasthan.gov.in/phed
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
150 mm
-
2082
2082
... More
200 mm
-
2554
2554
... More
Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-9 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work)
Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
-
-
-
... More
100 mm
-
1670
1670
... More
150 mm
-
2384
2384
... More
200 mm
-
3037
3037
... More
Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
Supply may be in coil or straight length in 6 M/12 M.
-
-
-
... More
HDPE PE-80 PN-6
-
-
-
... More
63 mm dia
-
171
171
... More
75 mm dia
-
217
217
... More
90 mm dia
-
306
306
... More
110 mm dia
-
463
463
... More
HDPE PE-100 PN-6
-
-
-
... More
63 mm dia
-
145
145
... More
75 mm dia
-
186
186
... More
90 mm dia
-
264
264
... More
110 mm dia
-
442
442
... More
HDPE PE-80 PN-10
-
-
-
... More
90 mm dia
-
449
449
... More
110 mm dia
-
675
675
... More
HDPE PE-100 PN-10
-
-
-
... More
90 mm dia
-
391
391
... More
110 mm dia
-
582
582
... More
De-jointing and removing of already laid CI/DI pipes of following diameters in excavated trenches with care, without damaging pipes, CID joints, valves, specials etc. and other materials and then refilling of soil after de-laying and de-jointing of pipelines with proper compaction and disposing of all surplus soil as directed with in a lead of 30 mtr. This also include stacking the pipes with care and transporting the same to div./sub div. store or as directed by EIC with in the division. (Rates are Exclusive of Earth Work)
-
-
-
... More
80 mm
-
45
45
... More
100 mm
-
50
50
... More
125 mm
-
50
50
... More
150 mm
-
59
59
... More
200 mm
-
79
79
... More
Laying, Jointing, Testing and Commissioning of Ductile Iron (DI) Pipes of any class in assorted length with specials, valves etc. including local handling and transportation from PHED store and then refilling of soil with proper compaction and disposing of all surplus soil as directed with in a lead of 30 mtr as per satisfaction of EIC. (Rates are Exclusive of Earth Work and jointing materials)
-
-
-
... More
80 mm
-
48
48
... More
100 mm
-
50
50
... More
125 mm
-
52
52
... More
150 mm
-
64
64
... More
200 mm
-
80
80
... More
Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PP/MS saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil (excluding road); depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including MS/PP saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or ball valve (min. weight 165 gm) and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipe with fittings in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level.
Note: Road cut and restoration is not part of this item and paid separately.
-
-
-
... More
For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.
-
1658
1658
... More
Providing Household Tap Connection as per technical specification and approved drawing and as per relevant IS code (amended up to date) from HDPE pipe line up to consumer meter/premises by using electro fusion saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including electrofusion saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or wheel valve and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) for and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipes with fittings in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level.
Note: Road cut and restoration is not part of this item and paid separately.
-
-
-
... More
For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.
-
1986
1986
... More
Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from HDPE/uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PP mechanical Integrated saddle with inbuilt flow control valve made out of SS316 designed for 5 LPM discharge at 0.5 bar pressure , not exceeding the flow of 7 LPM at 2 bar and a compression elbow, moulded in single piece/ fusion welded (Complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including GM Full-way Valve (IS:778 Mark) or wheel valve and specials with 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using PPR-C pipe with standard PPR fittings/ GI pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level.
-
-
-
... More
Note: Road cut and restoration is not part of this item and paid separately.
-
-
-
... More
For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.
-
1780
1780
... More
P & F Bib cock (IS : 781 mark), superior quality of approved make , brass 400 gm, 15 mm nominal bore.
-
311
311
... More
P & F Bib cock (IS : 8931 mark), superior quality of approved make, chrome plated with complete brass body including brass handle with wt. 300 to 325 gm.15 mm nominal bore.
-
311
311
... More
Road cutting for house hold service connection in minimum trench width wherever road crossing is required. Road cutting of cement concrete,WBM, Black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CC M-30 grade as per specification and direction of Engineer in charge..
-
200
200
... More
Add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm PE 80 PN 16 as per ISO 4427 MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.
-
44
44
... More
Add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm ISI marked PN16 SDR 7.4 (IS:15801:2008) PPR-C (Three layered) pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.
-
57
57
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:
All kinds of soil
-
200
200
... More
Add extra for trenches for every additional lift over item no 4.1
-
-
-
... More
Above 1.5 mtr and up to 3.0 mtr.
-
20
20
... More
Above 3.0 mtr and up to 4.5 mtr.
-
39
39
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and stacking serviceable material for measurements and disposal of unserviceable material as directed, with in a lead of 50 Mtr. including all safety provisions required .:
-
-
-
... More
Ordinary rock
-
365
365
... More
Hard rock (requiring blasting)
-
546
546
... More
Hard rock(blasting prohibited)
-
782
782
... More
Add extra for trenches for every additional lift over item no 4.3
-
-
-
... More
Above 1.5 mtr and up to 3.0 mtr.
-
37
37
... More
Above 3.0 mtr and up to 4.5 mtr.
-
73
73
... More
Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
-
757
757
... More
Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work.
-
-
-
... More
Bituminous courses
-
416
416
... More
Granular courses
-
296
296
... More
Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.
-
4678
4678
... More
Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.
-
-
-
... More
M20 grade Nominal Mix
1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
-
6162
6162
... More
Plain cement concrete pavement of M-30 Grade
-
6497
6497
... More
Removing & Re-fixing of Precast concrete interlocking blocks for laying of pipe line by manual method, stacking of serviceable & non serviceable material separately, disposal of dismantled material lead up to 50 mtr. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joints to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the directions of Engineer in charge. The rates to be inclusive of fixing of 70 percent reusable precast concrete interlocking block and cost of required new precast concrete interlocking block against damaged, including all lead and lift as per Technical specifications. (Interlocking block manufactured by fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS:6717-2001. Tensile splitting strength and breaking load as per BS: 6717-2001 Colour: Grey cement natural colour. Variation in Dimension : Less than 1.6 mm Variation in thickness: Less than 3.2 mm) Note: If existing precast block used more than 70%, than for every 1% use above 70%, deduction of 1% in cost shall be done for every 1% use above 70%.
-
-
-
... More
60 mm thick.
-
275
275
... More
80 mm thick.
-
298
298
... More
100 mm thick
-
332
332
... More
Horizontal directional drilling (by trenchless technology) of suitable dia hole minimum 1.0 mtr below natural ground level in all type of soil under CC/BT roads and pulling HDPE pipes of dia up to 110 mm, which are available in the form of a coil including excavation, shoring/ strutting, preparation, maintain the thrust and including, road dismantling, excavation and refilling of drive pit and exit pit, restoration of road cut as per technical specification and scope of work, but excluding the cost of pipe line.
-
289
289
... More
Supply laying and pushing of MS casing pipe of specified thickness approved by concerned department authority by trenchless method adopting any suitable technology below ground at required depth under running traffic condition as per Highway/ Railway standard including carrying out survey work at the job site for determining underground cable trenches like telephone, cable, water & sanitary lines and resistivity test for finding the soil strata using necessary equipments for completion of works, mobilizing of machineries and specialized crew at the job site complete in all respect, including excavation of driven pit and exit pit (up to 3 meter depth) with proper protection at these sites with shoring sheets and ISMB. Providing MS cutting edges for front shield and constructing thrust bed at designated level. Necessary dewatering and providing concrete foundation at the base of the driven pit, PVC/Rubber saddle as per the requirement of Highway/Railway authority, crane for handing of pipe and any other machinery, tools, and tackles required, construction of temporary works as per design, drawing and method as per approved by authority specification and the direction of the Engineer.
Apply corrosion, resistant, protection on inside and outside of casing pipe as per technical specification.
-
-
-
... More
300 mm Dia 8 mm thick casing pipe.
-
18353
18353
... More
400 mm Dia 8 mm thick casing pipe .
-
20972
20972
... More
500 mm Dia 8 mm thick casing pipe .
-
23569
23569
... More
600 mm Dia 10 mm thick casing pipe .
-
30211
30211
... More
700 mm Dia 10 mm thick casing pipe .
-
33457
33457
... More
Removing & Re-fixing of Bricks Kharanja road by manual means for laying of pipe line, stacking of serviceable & unserviceable material separately, disposal of dismantled material lead up to 50 mtr. The Bricks interlocking be laid on average 12 mm thick bed of mud mortar and the joints to be filled with pointing in cement mortar 1:3. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the direction of Engineer in charge. The rates are inclusive of fixing of 80 percent reusable Bricks and cost of required new First class FPS bricks (min. 10.5 Mpa) in place of damaged bricks, all lead and lift as per Technical Specifications and direction of Engineer in Charge. Note: If existing bricks used more than 80%, than for every 1% above 80% use, deduction of 1% in cost shall be done for every 1% use above 80%.
-
-
-
... More
Horizontal aligned Bricks
-
212
212
... More
Vertical aligned Bricks
-
230
230
... More
Pump sets
-
-
-
... More
Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 , 2 pole motor operating at synchronised speed of 3000 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.
-
-
-
... More
Centrifugal Monoblock Pump set (Single Stage)
-
-
-
... More
2.2 KW (3.0 HP)
-
34070
34070
... More
3.7 KW (5.0 HP)
-
43760
43760
... More
5.5 KW (7.5 HP)
-
55225
55225
... More
7.5 KW (10 HP)
-
67514
67514
... More
9.3 KW (12.5 HP)
-
78860
78860
... More
11.0 KW (15 HP)
-
83148
83148
... More
15.0 KW (20.0 HP)
-
108825
108825
... More
18.5 KW (25.0 HP)
-
143629
143629
... More
Centrifugal Monoblock Pump set (Double Stage)
-
-
-
... More
3.7 KW (5.0 HP)
-
50344
50344
... More
5.5 KW (7.5 HP)
-
61220
61220
... More
7.5 KW (10.0 HP)
-
73509
73509
... More
9.3 KW (12.5 HP)
-
81408
81408
... More
11.0 KW (15.0 HP)
-
89948
89948
... More
15.0 KW (20.0 HP)
-
117644
117644
... More
Vacuum Pump set (Monoblock)
-
-
-
... More
Providing, installation, testing and commissioning of Mono block Vacuum pump set with base plate including C.C. foundation / cross channels / RSJ frame and foundation bolts etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge.
-
-
-
... More
0.75 KW (1 HP), single Ph
-
31145
31145
... More
2.2 KW (3 HP), three Ph
-
56725
56725
... More
Vacuum Pump set (Coupled)
-
-
-
... More
Providing, installation, testing and commissioning of Vacuum pump set with horizontal foot mounted TEFC squirrel cage motor working on three phase 50 Hz, 415 Volts +/- 10% with base plate including cost of flexible couplings, coupling guard etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge.
-
-
-
... More
3.7 KW (5.0 HP)
-
120824
120824
... More
7.5 KW (10.0 HP)
-
148983
148983
... More
Providing, installation, testing and commissioning of Submerged Centrifugal Pump sets with motor 4 pole synchronised speed of 1500 rpm ( water immersed, dry air filled, class "F" insulated TEWC motor integrally mounted on volute casing pump sets for drinking water ) 3 phase, +/- 3%, 415 volt +/- 10%, along with suitable foundation/ installation device and with 10 mtr cable, material of construction of impeller SS, casing (volute) CI, wearing ring SS, etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.
-
-
-
... More
15 KW
-
243761
243761
... More
18.5 KW
-
300640
300640
... More
22 KW
-
357517
357517
... More
30 KW
-
487522
487522
... More
37 KW
-
598068
598068
... More
45 KW
-
633155
633155
... More
55 KW
-
813097
813097
... More
75 KW
-
902677
902677
... More
90 KW
-
1221495
1221495
... More
110 KW
-
1503260
1503260
... More
125 KW
-
1648764
1648764
... More
132 KW
-
1738837
1738837
... More
160 KW
-
2002177
2002177
... More
180 KW
-
2127112
2127112
... More
200 KW
-
2552534
2552534
... More
Providing, installation, testing and commissioning of submersible Monoblock pump set conforming to IS 8034 and 2 pole motor operating at synchronised speed of speed 3000 RPM, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz AC and with water lubricated bearing to accept entire hydraulic thrust. Supply, with cable guard, thrust carbon/fibre bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump and minimum 6 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following posion : Less than 1.6 mm Variation in thickness: Less than 3.2 mm)
-
-
-
... More
2.2 KW (3.0 HP)
-
35932
35932
... More
3.7 KW (5.0 HP)
-
39941
39941
... More
5.5 KW (7.5 HP)
-
53789
53789
... More
7.5 KW (10 HP)
-
60640
60640
... More
9.3 KW (12.5 HP)
-
76487
76487
... More
11.0 KW (15 HP)
-
85567
85567
... More
15.0 KW (20.0 HP)
-
101747
101747
... More
Providing, installation, testing and commissioning of submersible dewatering pump set conforming to relevant IS codes and as per scope of work and Technical Specifications, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft, impeller, pump and motor body. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard. The pump set shall be suitable for direct coupling, with suitable suction strainer etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.
-
-
-
... More
0.75 KW (1.0 HP)
-
40555
40555
... More
1.5 KW (2.0 HP)
-
46501
46501
... More
2.2 KW (3.0 HP)
-
80307
80307
... More
3.7 KW (5.0 HP )
-
107500
107500
... More
Providing and fixing at site with necessary packing, Horizontal Centrifugal Split Casting pumps with 4 pole induction motor operating at synchronised speed of speed 1500 RPM as per IS 12615: 2011 or amended up to date , CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts, Cement concrete foundation etc. complete with all respect as per the specification and scope of work and direction of Engineer in Charge of following range of duty conditions.
Note: Duty condition of required pump shall also be mentioned in BoQ.
-
-
-
... More
Discharge 20 to 30 LPS and head 20 to 30 M
-
166357
166357
... More
Discharge 20 to 30 LPS and head 31 to 40 M
-
242227
242227
... More
Discharge 20 to 30 LPS and head 41 to 50 M
-
285634
285634
... More
Discharge 20 to 30 LPS and head 51 to 60 M
-
327309
327309
... More
Discharge 20 to 30 LPS and head 61 to 70 M
-
417667
417667
... More
Discharge 20 to 30 LPS and head 71 to 80 M
-
417667
417667
... More
Discharge 20 to 30 LPS and head 81 to 90 M
-
417667
417667
... More
Discharge 31 t0 40 LPS and head 20 to 30 M
-
242227
242227
... More
Discharge 31 t0 40 LPS and head 31 to 40 M
-
285634
285634
... More
Discharge 31 t0 40 LPS and head 41 to 50 M
-
327309
327309
... More
Discharge 31 t0 40 LPS and head 51 to 60 M
-
417667
417667
... More
Discharge 31 t0 40 LPS and head 61 to 70 M
-
492515
492515
... More
Discharge 31 to 40 LPS and head 71 to 80 M
-
492515
492515
... More
Discharge 31 to 40 LPS and head 81 to 90 M
-
574432
574432
... More
Discharge 41 t0 50 LPS and head 20 to 30 M
-
285634
285634
... More
Discharge 41 t0 50 LPS and head 31 to 40 M
-
417667
417667
... More
Discharge 41 t0 50 LPS and head 41 to 50 M
-
417667
417667
... More
Discharge 41 t0 50 LPS and head 51 to 60 M
-
492515
492515
... More
Discharge 41 t0 50 LPS and head 61 to 70 M
-
574432
574432
... More
Discharge 41 to 50 LPS and head 71 to 80 M
-
672571
672571
... More
Discharge 41 to 50 LPS and head 81 to 90 M
-
672571
672571
... More
Discharge 51 to 60 LPS and head 20 to 30 M
-
327309
327309
... More
Discharge 51 to 60 LPS and head 31 to 40 M
-
417667
417667
... More
Discharge 51 to 60 LPS and head 41 to 50 M
-
492515
492515
... More
Discharge 51 to 60 LPS and head 51 to 60 M
-
574432
574432
... More
Discharge 51 to 60 LPS and head 61 to 70 M
-
672571
672571
... More
Discharge 51 to 60 LPS and head 71 to 80 M
-
858245
858245
... More
Discharge 51 to 60 LPS and head 81 to 90 M
-
858245
858245
... More
Discharge 61 to 70 LPS and head 20 to 30 M
-
327309
327309
... More
Discharge 61 to 70 LPS and head 31 to 40 M
-
417667
417667
... More
Discharge 61 to 70 LPS and head 41 to 50 M
-
574432
574432
... More
Discharge 61 to 70 LPS and head 51 to 60 M
-
672571
672571
... More
Discharge 61 to 70 LPS and head 61 to 70 M
-
858245
858245
... More
Discharge 61 to 70 LPS and head 71 to 80 M
-
858245
858245
... More
Discharge 61 to 70 LPS and head 81 to 90 M
-
990485
990485
... More
Discharge 71 to 80 LPS and head 20 to 30 M
-
417667
417667
... More
Discharge 71 to 80 LPS and head 31 to 40 M
-
492515
492515
... More
Discharge 71 to 80 LPS and head 41 to 50 M
-
672571
672571
... More
Discharge 71 to 80 LPS and head 51 to 60 M
-
858245
858245
... More
Discharge 71 to 80 LPS and head 61 to 70 M
-
858245
858245
... More
Discharge 71 to 80 LPS and head 71 to 80 M
-
990485
990485
... More
Discharge 71 to 80 LPS and head 81 to 90 M
-
1159705
1159705
... More
Discharge 81 to 90 LPS and head 20 to 30 M
-
417667
417667
... More
Discharge 81 to 90 LPS and head 31 to 40 M
-
574432
574432
... More
Discharge 81 to 90 LPS and head 41 to 50 M
-
672571
672571
... More
Discharge 81 to 90 LPS and head 51 to 60 M
-
858245
858245
... More
Discharge 81 to 90 LPS and head 61 to 70 M
-
858245
858245
... More
Discharge 81 to 90 LPS and head 71 to 80 M
-
1159705
1159705
... More
Discharge 81 to 90 LPS and head 81 to 90 M
-
1159705
1159705
... More
Discharge 91 to 100 LPS and head 20 to 30 M
-
492515
492515
... More
Discharge 91 to 100 LPS and head 31 to 40 M
-
672571
672571
... More
Discharge 91 to 100 LPS and head 41 to 50 M
-
858245
858245
... More
Discharge 91 to 100 LPS and head 51 to 60 M
-
858245
858245
... More
Discharge 91 to 100 LPS and head 61 to 70 M
-
990485
990485
... More
Discharge 91 to 100 LPS and head 71 to 80 M
-
1159705
1159705
... More
Discharge 91 to 100 LPS and head 81 to 90 M
-
1282285
1282285
... More
Discharge 101 to 120 LPS and head 20 to 30 M
-
492515
492515
... More
Discharge 101 to 120 LPS and head 31 to 40 M
-
672571
672571
... More
Discharge 101 to 120 LPS and head 41 to 50 M
-
858245
858245
... More
Discharge 101 to 120 LPS and head 51 to 60 M
-
990485
990485
... More
Discharge 101 to 120 LPS and head 61 to 70 M
-
1159705
1159705
... More
Discharge 101to 120 LPS and head 71 to 80 M
-
1159705
1159705
... More
Discharge 101to 120 LPS and head 81 to 90 M
-
1556866
1556866
... More
Discharge 121 to 140 LPS and head 20 to 30 M
-
574432
574432
... More
Discharge 121 to 140 LPS and head 31 to 40 M
-
858245
858245
... More
Discharge 121 to 140 LPS and head 41 to 50 M
-
990485
990485
... More
Discharge 121 to 140 LPS and head 51 to 60 M
-
1159705
1159705
... More
Discharge 121 to 140 LPS and head 61 to 70 M
-
1159705
1159705
... More
Discharge 121 to 140 LPS and head 71 to 80 M
-
1338395
1338395
... More
Discharge 121 to 140 LPS and head 81 to 90 M
-
1556866
1556866
... More
Discharge 141 to 160 LPS and head 20 to 30 M
-
672571
672571
... More
Discharge 141 to 160 LPS and head 31 to 40 M
-
858245
858245
... More
Discharge 141 to 160 LPS and head 41 to 50 M
-
1159705
1159705
... More
Discharge 141 to 160 LPS and head 51 to 60 M
-
1282285
1282285
... More
Discharge 141 to 160 LPS and head 61 to 70 M
-
1556866
1556866
... More
Discharge 141 to 160 LPS and head 71 to 80 M
-
1556866
1556866
... More
Discharge 141 to 160 LPS and head 81 to 90 M
-
1855336
1855336
... More
Discharge 161 to 180 LPS and head 20 to 30 M
-
858245
858245
... More
Discharge 161 to 180 LPS and head 31 to 40 M
-
990485
990485
... More
Discharge 161 to 180 LPS and head 41 to 50 M
-
1159705
1159705
... More
Discharge 161 to 180 LPS and head 51 to 60 M
-
1338395
1338395
... More
Discharge 161 to 180 LPS and head 61 to 70 M
-
1556866
1556866
... More
Discharge 161 to 180 LPS and head 71 to 80 M
-
1707880
1707880
... More
Discharge 161 to 180 LPS and head 81 to 90 M
-
1855336
1855336
... More
Discharge 181 to 200 LPS and head 20 to 30 M
-
858245
858245
... More
Discharge 181 to 200 LPS and head 31 to 40 M
-
1159705
1159705
... More
Discharge 181 to 200 LPS and head 41 to 50 M
-
1282285
1282285
... More
Discharge 181 to 200 LPS and head 51 to 60 M
-
1556866
1556866
... More
Discharge 181 to 200 LPS and head 61 to 70 M
-
1707880
1707880
... More
Discharge 181 to 200 LPS and head 71 to 80 M
-
1999666
1999666
... More
Discharge 181 to 200 LPS and head 81 to 90 M
-
2211026
2211026
... More
Providing and fixing at site with necessary packing, Horizontal Centrifugal Split Casting pumps with 4 pole induction motor operating at synchronised speed of speed 1500 RPM as per IS 12615: 2011 or amended up to date , CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts, Cement concrete foundation etc. complete with all respect as per the specification and scope of work and direction of Engineer in Charge of following range of duty conditions.
Note: Duty condition of required pump shall also be mentioned in BoQ.
-
-
-
... More
Discharge 201 to 220 LPS and head 20 to 30 M
-
858245
858245
... More
Discharge 201 to 220 LPS and head 31 to 40 M
-
1159705
1159705
... More
Discharge 201 to 220 LPS and head 41 to 50 M
-
1556866
1556866
... More
Discharge 201 to 220 LPS and head 51 to 60 M
-
1707880
1707880
... More
Discharge 201 to 220 LPS and head 61 to 70 M
-
1855336
1855336
... More
Discharge 221 to 240 LPS and head 20 to 30 M
-
990485
990485
... More
Discharge 221 to 240 LPS and head 31 to 40 M
-
1282285
1282285
... More
Discharge 221 to 240 LPS and head 41 to 50 M
-
1556866
1556866
... More
Discharge 221 to 240 LPS and head 51 to 60 M
-
1855336
1855336
... More
Discharge 221 to 240 LPS and head 61 to 70 M
-
1999666
1999666
... More
Discharge 241 to 260 LPS and head 20 to 30 M
-
990485
990485
... More
Discharge 241 to 260 LPS and head 31 to 40 M
-
1338395
1338395
... More
Discharge 241 to 260 LPS and head 41 to 50 M
-
1556866
1556866
... More
Discharge 241 to 260 LPS and head 51 to 60 M
-
1855336
1855336
... More
Discharge 241 to 260 LPS and head 61 to 70 M
-
2211026
2211026
... More
Discharge 261 to 280 LPS and head 20 to 30 M
-
1159705
1159705
... More
Discharge 261 to 280 LPS and head 31 to 40 M
-
1556866
1556866
... More
Discharge 261 to 280 LPS and head 41 to 50 M
-
1707880
1707880
... More
Discharge 261 to 280 LPS and head 51 to 60 M
-
1999666
1999666
... More
Discharge 261 to 280 LPS and head 61 to 70 M
-
2383025
2383025
... More
Discharge 281 to 300 LPS and head 20 to 30 M
-
1159705
1159705
... More
Discharge 281 to 300 LPS and head 31 to 40 M
-
1556866
1556866
... More
Discharge 281 to 300 LPS and head 41 to 50 M
-
1855336
1855336
... More
Discharge 281 to 300 LPS and head 51 to 60 M
-
1999666
1999666
... More
Discharge 281 to 300 LPS and head 61 to 70 M
-
2383025
2383025
... More
Discharge 301 to 325 LPS and head 20 to 30 M
-
1282285
1282285
... More
Discharge 301 to 325 LPS and head 31 to 40 M
-
1556866
1556866
... More
Discharge 301 to 325 LPS and head 41 to 50 M
-
1999666
1999666
... More
Discharge 301 to 325 LPS and head 51 to 60 M
-
2211026
2211026
... More
Discharge 301 to 325 LPS and head 61 to 70 M
-
2651461
2651461
... More
Discharge 326 to 350 LPS and head 20 to 30 M
-
1282285
1282285
... More
Discharge 326 to 350 LPS and head 31 to 40 M
-
1707880
1707880
... More
Discharge 326 to 350 LPS and head 41 to 50 M
-
1999666
1999666
... More
Discharge 326 to 350 LPS and head 51 to 60 M
-
2383025
2383025
... More
Discharge 326 to 350 LPS and head 61 to 70 M
-
2651461
2651461
... More
Discharge 351 to 400 LPS and head 20 to 30 M
-
1556866
1556866
... More
Discharge 351 to 400 LPS and head 31 to 40 M
-
1855336
1855336
... More
Discharge 351 to 400 LPS and head 41 to 50 M
-
2211026
2211026
... More
Discharge 351 to 400 LPS and head 51 to 60 M
-
2651461
2651461
... More
Discharge 351 to 400 LPS and head 61 to 70 M
-
2912679
2912679
... More
Valves and Appurtenances
-
-
-
... More
Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
Manually Operated CI Sluice valve of Class PN-1.0
-
-
-
... More
80 mm HW
-
6301
6301
... More
100 mm HW
-
8649
8649
... More
125 mm HW
-
11173
11173
... More
150 mm HW
-
13595
13595
... More
200 mm HW
-
22603
22603
... More
250 mm HW
-
35722
35722
... More
300 mm HW
-
45382
45382
... More
Motorized Sluice Valves with Electric Actuator with integral starter of Class PN
1.0
-
-
-
... More
80 mm dia
-
118496
118496
... More
100 mm dia
-
122294
122294
... More
125 mm dia
-
126666
126666
... More
150 mm dia
-
133417
133417
... More
200 mm dia
-
151343
151343
... More
250 mm dia
-
171551
171551
... More
300 mm dia
-
182779
182779
... More
Providing, lowering, laying, aligning, fixing in position CI D/F short body pattern type butterfly valves having body, disc and end cover in graded cast iron generally conforming to (IS13095/1991amended up to date), synthetic rubber faced ring secured on disc by retaining ring with SS steel screw stub shaft of SS riding in Teflon bearing including C.C. foundation/ structural steel support, material, labour, testing along with pipe line and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work
-
-
-
... More
Manually Operated Butterfly Valve PN-1.0
-
-
-
... More
100 mm dia ( With lever operated)
-
12762
12762
... More
125 mm dia ( With lever operated)
-
17582
17582
... More
150 mm dia ( With lever operated)
-
21877
21877
... More
200 mm dia (With Gear Operated)
-
32923
32923
... More
250 mm dia (With Gear Operated)
-
41797
41797
... More
300 mm dia (With Gear Operated)
-
52123
52123
... More
350 mm dia (With Gear Operated)
-
65006
65006
... More
Providing, lowering, aligning, fixing in position in pipe line, CI double flanged swing type Non Return Valves (NRV) of approved make of following Pressure rating & dia complete, confirming to IS: 5312 (part -1)/ 2004 (amended up to date) and of following specifications: Body, Cover & disc of Grey cast iron of IS:210/ FG200. Face to face dimensions as per IS 5312 (part -1):2004 , Flanges Drilled as per IS:1538. Epoxy (Non-Toxic & suitable for drinking water) applied on body, cover and disc inside and outside . Body seat ring of SS/CS Door face ring - EPDM/ Neoprene (food grade quality) ,Shaft of SS- AISI- 410 ,Hinge Malleable cast iron / SS AISI 316 ,Bonnet Gasket EPDM, Bush- Leaded tin Bronze/ PTET, Gasket EPDM/NBR ,Nut-Bolt as per IS:1363 and IS: 1367 (galvanised steel) ,Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in- charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
Class PN 1.0
-
-
-
... More
80 mm dia
-
6219
6219
... More
100 mm dia
-
7973
7973
... More
125 mm dia
-
10452
10452
... More
150 mm dia
-
13107
13107
... More
200 mm dia
-
22519
22519
... More
250 mm dia
-
36559
36559
... More
300 mm dia
-
50411
50411
... More
350 mm dia
-
88822
88822
... More
Providing, lowering, aligning, fixing in position in pipe line, CI double flanged Dual plate check valve of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Cover of Grey cast iron of IS:210/ FG200 , Disc / plates - Cast steel ,Disc seal ring of EPDM/ NBR (food grade quality) ,Body seat of SS ,Face to face dimensions as per API: 594
,Flanges Drilled as per IS:1538. Epoxy (Non-Toxic & suitable for drinking water) applied on body & cover inside and outside . Shaft/Stop Pin of SS- AISI- 304/410 , Hinge SS AISI 316/304 / CS ,Spring SS AISI 316/304 , Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O "ring seal.Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) ,Insertion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
Class PN 1.0
-
-
-
... More
80 mm dia
-
6055
6055
... More
100 mm dia
-
7694
7694
... More
125 mm dia
-
9640
9640
... More
150 mm dia
-
12719
12719
... More
200 mm dia
-
21892
21892
... More
250 mm dia
-
34618
34618
... More
300 mm dia
-
46370
46370
... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI single Air Valve Flanged/ Screwed type of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended up to date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float Stainless Steel AISI 304 / IS: 3444 ,Float Guide- HBT1,Body seat ring - Leaded tin bronze/ SS , Seal ring and face ring - EPDM/NBR, Ends flanged according to IS 6418 or Screwed type shall have external pipe threads conforming to IS 554 Fasteners - CS Epoxy paint inside outside of food grade safe for drinking water ,Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work.
-
-
-
... More
Class PN 1.0
-
-
-
... More
15 mm S-1 Type
-
2423
2423
... More
25 mm S-1 Type
-
3145
3145
... More
40 mm S-1 Type
-
3912
3912
... More
50 mm S-2 Type
-
4590
4590
... More
Class PN 1.6
-
-
-
... More
15 mm S-1 Type
-
2587
2587
... More
25 mm S-1 Type
-
3296
3296
... More
40 mm S-1 Type
-
4046
4046
... More
50 mm S-2 Type
-
4811
4811
... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI Double Acting Kinetic Air Valve with isolating Sluice Valve of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended up to date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 , Float Guide- HBT1.HP Orifice- HTB2/ SS,Body seat ring - Leaded tin bronze/ SS .Seal ring and face ring - EPDM/NBR ,Ends flanged according to IS 6418,Fastners - CS, Epoxy paint inside outside of food grade safe for drinking water ,Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work.
-
-
-
... More
Class PN 1.0
-
-
-
... More
40 mm
-
11616
11616
... More
50 mm
-
13234
13234
... More
80 mm
-
17112
17112
... More
100 mm
-
23250
23250
... More
150 mm
-
48594
48594
... More
200 mm
-
74101
74101
... More
Class PN 1.6
-
-
-
... More
40 mm
-
12431
12431
... More
50 mm
-
14126
14126
... More
80 mm
-
17858
17858
... More
100 mm
-
24184
24184
... More
150 mm
-
51118
51118
... More
200 mm
-
77713
77713
... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(amended up to date),Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Grey cast iron of grade IS:210/FG200
,Float- LP ball & HP ball : AISI 304 stainless Steel, Float Guide- HTB1,Seat ring & Gasket - EPDM/NBR, HP Orifice & HP orifice plug : HTB2/ SS ,Bush: Bronze , Flanges as per IS/ BS, Drilled as per IS:1538. Epoxy paint (Non-Toxic & suitable for drinking water) applied on body & cover inside and outside Fasteners - CS/ Galvanised steel ,Outlet of big orifice will have a screen to prevent Tamper of float, with CI metal seated D/F Non rising stem Sluice Valves as per (IS: 14846 amended up to date) PN 1.0 ratings Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work.
-
-
-
... More
Class PN 1.0
-
-
-
... More
40 mm
-
12811
12811
... More
50 mm
-
14038
14038
... More
80 mm
-
17304
17304
... More
100 mm
-
23227
23227
... More
150 mm
-
39551
39551
... More
200 mm
-
57592
57592
... More
Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2 1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS AISI 316/410 Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
Manually Operated Resilient Seated Sluice Valves of Class PN 1.6
-
-
-
... More
80 mm dia
-
9137
9137
... More
100 mm dia
-
11554
11554
... More
125 mm dia
-
17087
17087
... More
150 mm dia
-
19109
19109
... More
200 mm dia
-
29396
29396
... More
250 mm dia
-
48781
48781
... More
300 mm dia
-
62128
62128
... More
Motorized Sluice Valves with Electric Actuator and integral starter of Class PN
1.0
-
-
-
... More
80 mm dia
-
120451
120451
... More
100 mm dia
-
123908
123908
... More
125 mm dia
-
131735
131735
... More
150 mm dia
-
136800
136800
... More
200 mm dia
-
155060
155060
... More
250 mm dia
-
177836
177836
... More
300 mm dia
-
194973
194973
... More
Motorized Sluice Valves with Electric Actuator and integral starter of Class PN
1.6
-
-
-
... More
80 mm dia
-
121297
121297
... More
100 mm dia
-
124743
124743
... More
125 mm dia
-
132962
132962
... More
150 mm dia
-
139701
139701
... More
200 mm dia
-
155351
155351
... More
250 mm dia
-
177684
177684
... More
300 mm dia
-
193924
193924
... More
350 mm dia
-
256125
256125
... More
Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) short body pattern type double eccentric Butterfly valves of approved make of following class & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body, disc and end cover of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per DIN 3202 F4/ IS 13095 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside. Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 410/316 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR "O "ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in- charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
Class PN 1.6, Manually Operated with Gear
-
-
-
... More
100 mm dia
-
50005
50005
... More
150 mm dia
-
57538
57538
... More
200 mm dia
-
59837
59837
... More
250 mm dia
-
66241
66241
... More
300 mm dia
-
74691
74691
... More
350 mm dia
-
93544
93544
... More
Providing, lowering, aligning, fixing in position in pipe line, DI resilient seated (soft seated) Concentric Wafer type, Butterfly valves of approved make of following Pressure rating & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body- Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Disc
- DI (same as body material) / CS, Face to face dimensions as per DIN 3202 F4/ IS 13095 , Flanges Drilled as per IS:1538 ,Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside . Liner & Disc seal - EPDM/ Neoprene (food grade quality) ,Shaft of SS- AISI- 410/420 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR "O "ring seal , Nut-Bolt confirming to IS:1363 and IS: 1367/ Galvanised steel, Insertion rubber of black EPDM 6mm thick ,Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
Class PN 1.6, Wafer Type
-
-
-
... More
80 mm (Lever Operated)
-
10585
10585
... More
100 mm (Lever Operated)
-
12783
12783
... More
125 mm (Lever Operated
-
21548
21548
... More
150 mm (Lever Operated)
-
23397
23397
... More
200 mm (with Gear)
-
35284
35284
... More
250 mm (with Gear)
-
45556
45556
... More
300 mm (with Gear)
-
50571
50571
... More
Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) Swing type Non Return Valve of approved make of following Pressure rating & dia complete, generally confirming to IS: 5312 (part -1)/ 2004 (amended up to date) and of following specifications: Body, Bonnet & disc of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per IS 5312 (part -1):2004 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body, cover and disc inside and outside . Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS.Shaft of SS- AISI- 410, Hinge SS AISI 316/410 ,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O "ring seal Nut- Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
Class PN 1.6
-
-
-
... More
80 mm dia
-
9458
9458
... More
100 mm dia
-
12598
12598
... More
125 mm dia
-
17774
17774
... More
150 mm dia
-
21821
21821
... More
200 mm dia
-
37011
37011
... More
250 mm dia
-
55783
55783
... More
300 mm dia
-
76588
76588
... More
Providing, lowering, aligning, fixing in position in pipe line, DI double flanged resilient seated Dual plate check valve of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Disc / plates - SG-400/12 or CF-8M,Face to face dimensions as per API: 594 , Flanges Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body and cover inside and outside . Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 410 , Hinge SS AISI 316/304,Spring SS AISI 316/304,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O "ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) , Insertion rubber of black EPDM 6mm thick .Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
Class PN 1.6
-
-
-
... More
80 mm dia
-
11584
11584
... More
100 mm dia
-
13362
13362
... More
125 mm dia
-
14224
14224
... More
150 mm dia
-
20940
20940
... More
200 mm dia
-
36510
36510
... More
250 mm dia
-
55072
55072
... More
300 mm dia
-
77472
77472
... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, DI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(amended up to date) Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865, Float- LP ball & HP ball : AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR ,HP Orifice & HP orifice plug : Bronze/ SS ,Bush: Bronze ,Flanges as per IS/ BS, Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside fasteners - CS/ Galvanised steel, Outlet of big orifice will have a screen to prevent Tamper of float, with DI metal seated D/F Non rising stem Sluice Valves as per (IS: 14846 amended up to date) PN 1.6 ratings Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work.
-
-
-
... More
Class PN 1.6
-
-
-
... More
40 mm dia
-
13021
13021
... More
50 mm dia
-
13499
13499
... More
80 mm dia
-
17236
17236
... More
100 mm dia
-
23449
23449
... More
150 mm dia
-
40162
40162
... More
200 mm dia
-
55019
55019
... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, combination Air Release Valve Kinetic type with single chamber housed Double orifice and have 3 functions, large Air exhaust, small Air venting and large air intake during vacuum of pipeline of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512
,Body and bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865,Float & internal trim: AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR Drilled as per IS:1538. Electrostatic Epoxy Powder(EP- P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside Fasteners - CS/ Galvanised steel ,Outlet of big orifice will have a screen to prevent Tamper of float, Big orifice size should be equal or larger than the inlet flange bore, for fully comply with AWWA C512. ), Valve including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work.
-
-
-
... More
Class PN 1.6
-
-
-
... More
50 mm dia
-
18064
18064
... More
80 mm dia
-
23209
23209
... More
100 mm dia
-
31051
31051
... More
150 mm dia
-
49563
49563
... More
200 mm dia
-
62215
62215
... More
Providing, lowering, aligning & fixing in position DI D/F Plunger Type Flow Control Valve of approved make of following Pressure rating & dia complete and of following specifications: Body- Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or EN-JS 1030, Plunger/ Piston - Stainless steel AISI- 304/ Gr 1.4301, Piston Guides- Bronze Welded Overlay / SS Shaft/Crank/Spindle- Stainless steel AISI- 410/ Gr 1.4021 Body Seat Ring- Stainless steel AISI- 316/304/ Bronze IS:318- LTB2 ,Seal ( O- ring / Quad ring)- EPDM/ NBR, Bearing Bush - Bronze IS:318- LTB2,Slotted cylinder / Strainer / Diffuser- AISI- 420/ 304,Nut- Bolts - SS, Face to Face- as per ANSI B 16.1/ EN 558-1 and Flange ends should be as per ANSI B-16.5, Class 150 and Class 300/ EN-1092-2. Insertion rubber of black EPDM 6mm thick
,Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied both inside and outside . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer-In- Charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
Plunger Type Flow Control Valve
-
-
-
... More
80 mm dia
-
338036
338036
... More
100mm dia
-
368438
368438
... More
125 mm dia
-
410651
410651
... More
150mm dia
-
450548
450548
... More
200mm dia
-
552018
552018
... More
250mm dia
-
645671
645671
... More
300mm dia
-
788276
788276
... More
350mm dia
-
829368
829368
... More
Providing, lowering, aligning and fixing in position DI D/F Diaphragm type Pressure Reducing / Flow Control Valve of approved make of following Pressure rating & dia complete and of following specifications: Body & Bonnet - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or ASTM A 536, Diaphragm and Resilient seal disc - Flexible, non-wicking nylon fabric reinforced synthetic elastomer -Buna-N / EPDM (FDA / WRAS approved), Body Seat Ring - Cast stainless steel ASTM- A 351 GR. CF8M / AISI- 316, raised, replaceable inline & onsite Stem - Stainless Steel, AISI-316/410, raised, replaceable inline & onsite Spring & Bearing bush- Stainless Steel, AISI-316
,Disc guide, disc retainer & diaphragm washer - Stainless Steel, AISI-304/ 316/Bronze
,Seal- EPDM/ NBR ,Pilot Body- Stainless Steel, AISI-304/ CF8 or Brass Tubing - Stainless Steel, AISI-304 / Copper ,Solenoid Valve- Stainless Steel, AISI-316 ,Throttling plug - Stainless Steel, AISI-304, Nut- Bolts - SS Face to Face- as per ANSI B 16.1/ EN 558-1 and Flange ends should be as per ANSI B-16.5, Class 150 and Class 300/ EN-1092-2. insertion rubber of black EPDM 6mm thick Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied both inside and outside. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer-In- Charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
Pilot operated SCADA Compatible Diaphragm Type Pressure Reducing Valves
(Class PN 1.6)
-
-
-
... More
80 mm dia
-
114654
114654
... More
100 mm dia
-
124190
124190
... More
125 mm dia
-
143136
143136
... More
150 mm dia
-
169176
169176
... More
200 mm dia
-
209789
209789
... More
250 mm dia
-
285584
285584
... More
300 mm dia
-
376769
376769
... More
Diaphragm Type Flow Control Valve With Electrical Actuator suitable for SCADA
(PN 1.6 )
-
-
-
... More
80 mm dia
-
108336
108336
... More
100 mm dia
-
119999
119999
... More
125 mm dia
-
140144
140144
... More
150 mm dia
-
155111
155111
... More
200 mm dia
-
181481
181481
... More
250 mm dia
-
260901
260901
... More
300 mm dia
-
362386
362386
... More
DOL / Star delta starter type LT panels
-
-
-
... More
SITC DOL Starter type LT Panel of following rating, all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Backlight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Neutral Links , Spiral , Saddle & Packing Material ) etc. complete as per Technical Specifications and as per direction of Engineer-In-Charge.
-
-
-
... More
DOL STARTER 2.2 KW (3 HP)- : For 2 motors (1 W+ 1S)
I/C - MCB 25A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCB 16A ,TP, 10 KA, C Curve (2), Power Cont 9A TP AC3 Duty(2), 2
NO+2 NC Aux. Block(2), Thermal Overload Relay (4-6A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1
)(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty
MPP Type 2 Kvar (2)
-
49356
49356
... More
DOL STARTER 3.7KW (5 HP ) - : For 2 motors (1 W+ 1S)
I/C - MCB 32A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCB 25A ,TP, 10 KA, C Curve (2), Power Cont 12A TP AC3 Duty(2),
2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty
MPP Type 2 Kvar (2)
-
50413
50413
... More
DOL STARTER 5.5 KW (7.5HP) - : For 2 motors (1 W+ 1S)
I/C - MCB 40A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCB 25A ,TP, 10 KA, C Curve (2), Power Cont 12A TP AC3 Duty(2),
2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty
MPP Type 2 Kvar (2)
-
51448
51448
... More
SITC STAR DELTA Starter type LT Panel of following rating: all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Backlight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Neutral Links , Spiral , Saddle & Packing Material ) etc. and 100A/ 125A ,TPN, Aluminium Bus Bar with Colour coated heat shrinkage sleeves complete as per Technical Specifications and as per direction of Engineer-In-Charge.
-
-
-
... More
STAR DELTA STARTER 7.5 KW (10.0 HP) - : For 2 motors (1 W+ 1S)
I/C - MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCB 32A ,TP, 10 KA, C Curve (2), Power Cont 18A TP AC3 Duty(2),
2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 5Kvar (2), S/D Timer(2)
-
65077
65077
... More
STAR DELTA STARTER 9.3 KW (12.5 HP) - : For 2 motors (1 W+ 1S)
I/C - MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCB 40A ,TP, 10 KA, C Curve (2), Power Cont 18A TP AC3 Duty(2),
2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 5Kvar (2), S/D Timer(2)
-
66938
66938
... More
STAR DELTA STARTER 11.0 KW (15.0 HP) - : For 2 motors (1 W+ 1S)
I/C - MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCB 40A ,TP, 10 KA, C Curve (2), Power Cont 25A TP AC3 Duty(2),
2 NO+2 NC Aux. Block(2), Thermal Overload Relay (9-13A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2)
-
70561
70561
... More
STAR DELTA STARTER 15.0 KW (20.0 HP) : For 2 motors (1 W+ 1S)
I/C- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 100/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCCB 63A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (2), Power Cont 32A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (12-18A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1,
Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D
Timer(2)
-
99226
99226
... More
STAR DELTA STARTER 18.5 KW (25.0 HP) - : For 2 motors (1 W+ 1S)
I/C- MCCB 125A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 125/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (2), Power Cont 32A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (16-24A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch
1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 10 Kvar (2), S/D Timer(2)
-
108534
108534
... More
STAR DELTA STARTER 22.0 KW (30.0 HP) - : For 2 motors (1 W+ 1S)
I/C- MCCB 125A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 125/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (2), Power Cont 40A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (23-32A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch
1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 12.5 Kvar (2), S/D Timer(2)
-
122057
122057
... More
submersible motor pump set
-
-
-
... More
Supply & Installation of single phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.
-
-
-
... More
Up to 2.0 KW
-
16762
16762
... More
Above 2.0 KW
-
13050
13050
... More
Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.
-
-
-
... More
Up to 5.5 KW (7.5 HP) & head up to 120 mtr.
-
9083
9083
... More
Up to 5.5 KW (7.5 HP) & head above 120 mtr.
-
9628
9628
... More
7.5 KW (10 HP) & head up to 120 mtr.
-
6844
6844
... More
7.5 KW (10 HP) & head above 120 mtr.
-
8320
8320
... More
9.3 KW (12.5 HP) & head up to 120 mtr.
-
5800
5800
... More
9.3 KW (12.5 HP) & head above 120 mtr.
-
7552
7552
... More
11 KW (15 HP) & head up to 120 mtr.
-
5614
5614
... More
11 KW (15 HP) & head above 120 mtr.
-
6577
6577
... More
13 KW (17.5 HP) & head up to 120 mtr.
-
5603
5603
... More
13 KW (17.5 HP) & head above 120 mtr.
-
6400
6400
... More
15 KW (20 HP) and above, head up to 120 mtr.
-
5580
5580
... More
15 KW (20 HP) and above, head above 120 mtr.
-
6320
6320
... More
Supply and Fixing of Electric feeder panel (having projected canopy)for submersible pump set Single phase up to 5 HP, comprising of DOL Starter, MCB, Indicating Light, Ammeter, Volt meter, connection plate, condensers of approved make and the panel enclosure should be made out from 18 gauge M.S. Sheet with powder coating. Panel size Height 600 mm Width 500 mm depth 250 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete platform. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The operation of panel should be suitable for on 240 Volt AC Supply.
-
10009
10009
... More
Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB, DOL starter, overload relay, ampere meter, volt meter, phase preventer, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 300mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete platform. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply.
-
-
-
... More
Up to 5.00 HP
-
13081
13081
... More
Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply.
-
-
-
... More
Above 5 HP and up to 10 HP
-
24273
24273
... More
Above 10 HP and up to 15 HP
-
27829
27829
... More
Above 15 HP and up to 20 HP
-
32117
32117
... More
Above 20 HP and up to 30 HP
-
39375
39375
... More
Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc.
-
-
-
... More
3 core 4.0 Sq.mm
-
189
189
... More
3 core 6.0 Sq.mm
-
283
283
... More
3 core 10.0 Sq.mm
-
484
484
... More
3 core 16.0 Sq.mm
-
722
722
... More
Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.
-
-
-
... More
10.0 Sq.mm, 4 core
-
196
196
... More
16.0 Sq.mm, 4 core
-
234
234
... More
25.0 Sq.mm, 3.5 core
-
324
324
... More
35.0 Sq.mm, 3.5 core
-
379
379
... More
Earth work in excavation over areas (exceeding 30cm depth, 1.5 mtr in width and 10 SQM in plan) for construction of open well, lift up to 1.5 Mtr. including taking out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 meter.
-
-
-
... More
All kind of soil
-
314
314
... More
Ordinary Rock
-
674
674
... More
Hard Rock (Requiring blasting)
-
976
976
... More
Hard Rock (Blasting Prohibited)
-
1355
1355
... More
Add extra over item No. 2.39.1 for every additional lift of 1.5 Mtr. or part thereof : In all kind of soils.
-
47
47
... More
Add extra over item No. 2.39.2-4 for every additional lift of 1.5 Mtr. or part thereof : In Ordinary rock and hard rock.
-
67
67
... More
Add 20% extra over item No. 2.39 for excavation in saturated soil where pumping or baling out of water is required, including shoring strutting where required and dewatering.
-
-
-
... More
Labour charges for horizontal boring 100 mm dia in open well in rocky strata with all types of rock cutting & drilling tools etc. including all T&P required for job including dewatering arrangement.
-
626
626
... More
Supply, installation, testing and commissioning of MNRE approved Grid tied Solar Panels with inverter, meter, cable etc. suitable for Rooftop installation as well as Utility Scale Solar Power Projects with 25 years of Linear Generation warranty. Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR, showing arrangement of panel in available space, installation of PV module on MS frame as per approved design and drawings. Mounting structure shall be suitably designed to withstand wind velocity up to 150km/hr. Grid Tie Transformer less inverters, Multiple independent MPPTs, Peak efficiency of 98%. Connect up to multiple strings PV arrays, Easy & fast connection, Built-in string-level monitoring, IP65 protection level, Wi-Fi / internet based remote monitoring with 5 years warranty. All cabling up to panel and metre, earthing etc. required accessories and taxes are inclusive. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for panel, inverter, meter, cable etc. and suitable provision shall be included in tender document.
-
-
-
... More
Solar panels up to 10 KW at a single location.
-
60
60
... More
Solar panels more than 10 KW and up to 50 KW at a single location.
-
57
57
... More
Supply, installation, testing and commissioning of MNRE approved off Grid Solar Panels for running of motor pumps with 25 years of Linear Generation warranty, Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR, showing arrangement of panel in available space, installation of PV module on MS frame as per approved design and drawings. Mounting structure shall be suitably design to withstand wind velocity up to 150km/hr. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for solar panel and mounting structure and suitable provision shall be included in tender document.
-
43
43
... More
Supply, installation, testing and commissioning of MNRE approved off Grid Solar Panels for running of motor pumps with 25 years of Linear Generation warranty, Work includes designing of solar panel area and MS fabricated structure 120 micron hot dip galvanized iron , showing arrangement of panel in available space and installation of PV module on frame structure such that minimum height of lower edge of panel shall be 4.0 mtr from ground level to safeguard against damage and theft as per indicative drawing enclosed with the bid document. The foundation of structure shall be in RCC. Mounting structure shall be suitably designed to withstand wind velocity up to 150km/hr. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for solar panel and mounting structure and suitable provision shall be included in tender document.
-
60
60
... More
Supply, installation, testing and commissioning of MNRE approved off Grid Solar Panels for running of motor pumps with 25 years of Linear Generation warranty, Work includes designing of solar panel area and structure, showing arrangement of panel on rectangular OHSR with flat roof/ MS fabricated structure with polyethylene tank and installation of PV module on above structure as per approved design and drawings. Mounting structure shall be suitably design to withstand wind velocity up to 150km/hr. The work shall be as per detailed technical specifications, approved drawing and direction of Engineer in Charge. This item does not include cost of OHSR/ MS fabricated structure with tank but includes cost of items required for installation of solar panels on top of the tank.
Note: There shall be 5 year service warranty for solar panel and mounting structure and suitable provision shall be included in tender document.
-
51
51
... More
Providing, installation, testing and commissioning of AC submersible pump sets with inbuilt or individual solar pump controller with Maximum power point tracking (MPPT) for optimally use the solar panel and maximize water discharge to deliver maximum water during the day including PVC flat submersible cable from controller to motor pumps..
Solar pump shall be of Stainless steel construction and performance shall be as per scope of work and minimum lift of water shall be as per defined in scope .
Pump controller shall have Adequate protection against dry operation of motor pump set, and against hails and storms. Full protection against open circuit, accidental short circuit and reverse polarity should be provided. A good reliable on/off switch be provided. The cable shall be ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date ( standard insulation) and conductor as per class 5 of IS 8130:1980 or amended up to date.
The duty condition of pump set shall be as per scope of work and entire work shall be executed as per technical specification and direction of Engineer in charge.
-
-
-
... More
0.75 KW (1.0 HP)
-
74206
74206
... More
1.5 KW (2.0 HP)
-
79201
79201
... More
2.2 KW (3.0 HP)
-
114790
114790
... More
3.7 KW (5.0 HP)
-
147415
147415
... More
5.5 KW (7.5 HP)
-
181598
181598
... More
7.5 KW (10.0 HP)
-
197932
197932
... More
9.3 KW (12.5 HP)
-
222830
222830
... More
11 KW (15.0 HP)
-
244433
244433
... More
Supply, installation, testing and commissioning of DC submersible pump sets with inbuilt or individual solar pump controller with Maximum power point tracking (MPPT) for optimally use the solar panel and maximize water discharge to deliver maximum water during the day including PVC flat submersible cable from controller to motor pumps.
Solar pump shall be of Stainless steel construction and performance shall be as per scope of work and minimum lift of water shall be as per defined in scope .
Pump controller shall have Adequate protection against dry operation of motor pump set, and against hails and storms. Full protection against open circuit, accidental short circuit and reverse polarity should be provided. A good reliable on/off switch suitable for DC use is to be provided. The cable shall be ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date ( standard insulation) and conductor as per class 5 of IS 8130:1980 or amended up to date.
The duty condition of pump set shall be as per scope of work and entire work shall be as per technical specification and direction of Engineer in charge.
-
-
-
... More
0.75 KW (1.0 HP)
-
112033
112033
... More
1.5 KW (2.0 HP)
-
131843
131843
... More
2.2 KW (3.0 HP)
-
164690
164690
... More
Supply, installation, testing and commissioning of Remote monitoring unit on off grid solar controller for remote ON/OFF, parameter setting, monitoring and troubleshooting through mobile etc. complete. Web charges and data charges for 5 year during service warranty etc. complete in all respect as per technical specification and as per direction of Engineer.
-
45830
45830
... More
Providing, installation, testing and commissioning structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting for following staging and capacity of Rotational Moulded Polyethylene water storage tank on it as per indicative drawing given in the bid document. On the Polyethylene tanks, there shall be provision of suitable space for installation of solar panels up to 5.0 KW and further additional 2.5 KW on the side of Steel structure if required as per indicative drawing. Cost of solar panels is not included in this item . The structural steel shall be 120 micron hot dip galvanized iron and foundation of structure shall be in RCC with minimum depth as 2.0 mtr (other than rocky strata). The work includes P&F of Polyethylene Water Storage Tank(IS: 12701, ISI marked, indicating the BIS license No.) of approved make with cover. Providing & fixing 50 mm dia ISI marked G.I. class B pipe for inlet, outlet and over flow pipe and 32 mm GI class B pipe for wash out with GM gate valves at inlet and outlet pipe Including making connection etc. complete as per drawing, technical specification and direction of Engineer in In charge. The scope includes inlet GI pipe from ground level to water tank and outlet pipe from water tank to ground and up to 2.0 mtr away from foundation and overflow pipe is to be interconnected in distribution pipe line. Wash out pipe shall be taken up to a suitable point minimum 5.0 mtr away from tank. Water level controller shall installed to monitor level in tank and shall automatically shut off motor when tank is filled .
-
-
-
... More
Note: There shall be 5 year service warranty for structure, tank, fittings etc. and suitable provision shall be included in tender document.
-
-
-
... More
5000 Litre X 2 Nos. PE water tank, staging 10 meter.
-
665565
665565
... More
7500 Litre X 2 Nos. PE water tank, staging 10 meter.
-
731261
731261
... More
5000 Litre X 2 Nos. PE water tank , staging 12 meter.
-
754589
754589
... More
7500 Litre X 2 Nos. PE water tank, staging 12 meter.
-
816729
816729
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%