Public Health Engineering Department Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 12,40,940Document Cost
₹ 5,000Tender Fee
₹ 2,500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_PHCJA_364519_9Bid Award Id
ViewTender No
ACE PHED UDR 102-113/2023-24Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://https://phedwater.rajasthan.gov.in/phed
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in excavation in foundation trenches or drains including dressing of sides and ramnming of bottoms lift up to 1.5 mtr including traking out the excavated soil and depositing and refilling of jhiri with watering and ramming and deposals of surplus excavted soil as directed with a lead in a 50 mtr including stacking of useful material if available.
-
-
-
... More
Ordinary rock
-
-
-
... More
From 2.5m to 5.0 m BGL
200.2
134934
674
... More
Hard rock (requiring blasting) useful material 30 %
-
-
-
... More
Fromm 5.0m to 6.0 m BGL
80.1
78177
976
... More
From 6.0 to 18.0 m BGL
602.9
588430
976
... More
Recovery of Hard rock useful material 30%
-
-
-
... More
Add extra over item No 2.1 and 2.2 for every additional; lift of 1.5 m or part thereof.
-
-
-
... More
In All Kind of soil
-
-
-
... More
From 0.0 to 1.5 m BGL
-
-
-
... More
From 1.5 to 2.5 m BGL
80.1
3764
47
... More
In ordinary rock and hard rock
-
-
-
... More
From 2.5 to 3.0 m BGL
40.04
2682
67
... More
From 3.0to 4.5 m BGL
120.12
16096
134
... More
From 4.5 to 6.0 m BGL
120.12
24144
201
... More
From 6.0 to 7.5 m BGL
75.4
20207
268
... More
From 7.5m to 9.0 m BGL
75.4
25259
335
... More
From 9.0 to 10.5 m BGL
75.4
30310
402
... More
From 10.5 to 12.0 m BGL
75.4
35362
469
... More
From 12.0 to 13.5 m BGL
75.4
40414
536
... More
From 13.5 to 15.0 m BGL
75.4
45466
603
... More
From 15.0 to 16.5 m BGL
75.4
50518
670
... More
From 16.5 to 18.0 m BGL
75.4
55569
737
... More
Add extra over item no 2.1 and 2.2 for excavation in saturated soil where pumping or bailing out of water is required including shorting strutting where required and dewatering.(Respective applicable rates)
-
-
-
... More
From 4.5 to 6.0 m BWL
75.4
17749
235.4
... More
From 6.0 to 7.5 m BWL
75.4
18759
248.8
... More
From 7.5 to 9.0 m BWL
75.4
19769
262.2
... More
From 9.0 to 10.5 mBWL
75.4
20780
275.6
... More
From 10.5 to 12.0 m BWL
75.4
21790
289
... More
From 12.0 to 13.5 m BWL
75.4
22800
302.4
... More
From 13.5 to 15.0 m BWL
75.4
23811
315.8
... More
From 15.0 to 16.5 m BWL
75.4
24821
329.2
... More
From 16.5 to 18.0 m BWL
75.4
25832
342.6
... More
Centering & shuttering with ply wood or steel sheets including strutting , propping, barcing both ways with steel props and removal of form work up to floor Five level for:Walls (any thickness) including attached pilasters, buttresses, plinth and string course.
960
277440
289
... More
Add extra for shuttering in circular work (in respective centering and shuttering items)Sqm 20%
960
55488
57.8
... More
Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor five level
-
-
-
... More
Thermo mechanically treated bars (conforming to relevant IS:1786.)
3600
277200
77
... More
including Labour charges for cutting, bending for fabrication and binding reinforcement (plain or tor/ribbed/TMT steel) as per drawing and design for R.C.C. and R.B. work including cost of binding wire with all lead and lift up to floor five level complete
3600
43200
12
... More
Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor Five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for :
-
-
-
... More
Walls (any thickness) including attached pilasters buttresses, plinth and string courses fillets columns pillars pears abutments posts struts etc.
-
-
-
... More
M20 grade nominal mix .
72
403848
5609
... More
Structural steel work in single section fixed with connecting plate including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr. height
-
-
-
... More
In flates, tees, angles & Channals
1400
121800
87
... More
In R.S. Joists
600
52200
87
... More
Random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in:
-
-
-
... More
Cement Mortar 1:4 ( 1 cement : 4 Sand )
4
12728
3182
... More
Random Rubble stone masonary for superstructure above plinth level one storey height above 30 cm. thick walls in :
-
-
-
... More
Cement mortar 1:4 ( 1 Cement : 4 Sand )
3
11472
3824
... More
Plaster on new surface on wall in cement sand mortar 1:3 including raking of joints etc. complete fine finish:
-
-
-
... More
20 mm thick
20
4220
211
... More
Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding
-
-
-
... More
New Work ( Three or more coats)
131.9
6990
53
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :12.46.1 Two or more coats on new work
27.96
1929
69
... More
Labour charges for horizontal boring 100 mm dia in open well in rocky strata with all types of rock cutting & drilling tools etc. including all T&P required for
job including dewatering arrangement.
600
375600
626
... More
Constuction of open well 5.0 m dia and 18 m deep
-
-
-
... More
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil.
-
-
-
... More
From 0m to 2.5 m BGL
143.7
45121
314
... More
Earth work in excavation in foundation trenches or drains including dressing of sides and ramnming of bottoms lift up to 1.5 mtr including traking out the excavated soil and depositing and refilling of jhiri with watering and ramming and deposals of surplus excavted soil as directed with a lead in a 50 mtr including stacking of useful material if available.
-
-
-
... More
Ordinary rock
-
-
-
... More
From 2.5m to 5.0 m BGL
143.7
96853
674
... More
Hard rock (requiring blasting) useful material 30 %
-
-
-
... More
Fromm 5.0m to 6.0 m BGL
57.5
56120
976
... More
From 6.0 to 20.0 m BGL
471
459696
976
... More
Add extra over item No 2.1 and 2.2 for every additional; lift of 1.5 m or part thereof.
-
-
-
... More
In All Kind of soil
-
-
-
... More
From 0.0 to 1.5 m BGL
-
-
-
... More
From 1.5 to 2.5 m BGL
57.5
2702
47
... More
In ordinary rock and hard rock
-
-
-
... More
From 2.5 to 3.0 m BGL
28.74
1925
67
... More
From 3.0to 4.5 m BGL
86.2
11550
134
... More
From 4.5 to 6.0 m BGL
86.2
17326
201
... More
From 6.0 to 7.5 m BGL
58.9
15785
268
... More
From 7.5m to 9.0 m BGL
58.9
19731
335
... More
From 9.0 to 10.5 m BGL
58.9
23677
402
... More
From 10.5 to 12.0 m BGL
58.9
27624
469
... More
From 12.0 to 13.5 m BGL
58.9
31570
536
... More
From 13.5 to 15.0 m BGL
58.9
35516
603
... More
From 15.0 to 16.5 m BGL
58.9
39463
670
... More
From 16.5 to 18.0 m BGL
58.9
43409
737
... More
Add extra over item no 2.1 and 2.2 for excavation in saturated soil where pumping or bailing out of water is required including shorting strutting where required and dewatering.(Respective applicable rates)
-
-
-
... More
From 4.5 to 6.0 m BWL
86.2
20291
235.4
... More
From 6.0 to 7.5 m BWL
58.9
14654
248.8
... More
From 7.5 to 9.0 m BWL
58.9
15443
262.2
... More
From 9.0 to 10.5 mBWL
58.9
16232
275.6
... More
From 10.5 to 12.0 m BWL
58.9
17022
289
... More
From 12.0 to 13.5 m BWL
58.9
17811
302.4
... More
From 13.5 to 15.0 m BWL
58.9
18600
315.8
... More
From 15.0 to 16.5 m BWL
58.9
19389
329.2
... More
From 16.5 to 18.0 m BWL
58.9
20179
342.6
... More
Centering & shuttering with ply wood or steel sheets including strutting , propping, barcing both ways with steel props and removal of form work up to floor Five level for:Walls (any thickness) including attached pilasters, buttresses, plinth and string course.
600
173400
289
... More
Add extra for shuttering in circular work (in respective centering and shuttering items)Sqm 20%
600
34680
57.8
... More
Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor five level
-
-
-
... More
Thermo mechanically treated bars (conforming to relevant IS:1786.)
2200
169400
77
... More
including Labour charges for cutting, bending for fabrication and binding reinforcement (plain or tor/ribbed/TMT steel) as per drawing and design for R.C.C. and R.B. work including cost of binding wire with all lead and lift up to floor five level complete
2200
26400
12
... More
Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor Five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for :
-
-
-
... More
Walls (any thickness) including attached pilasters buttresses, plinth and string courses fillets columns pillars pears abutments posts struts etc.
-
-
-
... More
M20 grade nominal mix .
44
246796
5609
... More
Structural steel work in single section fixed with connecting plate including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr. height
-
-
-
... More
In flates, tees, angles & Channals
1000
87000
87
... More
In R.S. Joists
500
43500
87
... More
Random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in:
-
-
-
... More
Cement Mortar 1:4 ( 1 cement : 4 Sand )
2
6364
3182
... More
Random Rubble stone masonary for superstructure above plinth level one storey height above 30 cm. thick walls in :
-
-
-
... More
Cement mortar 1:4 ( 1 Cement : 4 Sand )
1.5
5736
3824
... More
Plaster on new surface on wall in cement sand mortar 1:3 including raking of joints etc. complete fine finish:
-
-
-
... More
20 mm thick
10
2110
211
... More
Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding
-
-
-
... More
New Work ( Three or more coats)
65.94
3494
53
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :12.46.1 Two or more coats on new work
13.98
964
69
... More
Labour charges for horizontal boring 100 mm dia in open well in rocky strata with all types of rock cutting & drilling tools etc. including all T&P required for
job including dewatering arrangement.
300
187800
626
... More
Construction of tube well having dia 150mm and 150 meter depth (1 Nos).
-
-
-
... More
Construction of Tube Well up to 100 mtr. depth in all type of rocks by DTH system & over burden to accommodate casing pipe of following sizes in all types of soils & over burden including lowering of casing pipes, (if required) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work would be completed after obtaining sand free water. The tube well should have a through out bore as per nominal dia of casing pipe.
-
-
-
... More
Nominal bore 150 mm dia.
100
72600
726
... More
Add 15% extra on above item (Item No 2.4.1 to 2.4.2) for drilling depth beyond 100 mtr and up to 200 mtr from ground level, rate shall be applicable for only extra depth beyond 100 mtr and up to 200 mtr.
50
41745
834.9
... More
Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended
up to date of following sizes
-
-
-
... More
150 mm dia NB(Thickness of pipe 5.0 mm & mass of tube 20.13 Kg/m)
12
23196
1933
... More
Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug.
-
-
-
... More
150 mm dia
1
812
812
... More
Construction of RCC GLSR cap -50 Kl (1 nos), 100 Kl (3 nos).
-
-
-
... More
Construction of RCC Dome type Ground level Service Reservoir (GLSR)of following capacity as per the Scope of work and technical specification ,consisting of the following main activities: a) Topographic survey, preparation of site cotour plan ,conducting SBC test and its approval from department before construction . Submission and approval of concrete mixz design and water quality test report for water be used in construction. b) Excavation in all type of soil , PCC below foundation , all RCC Work, c) All the GLSR shall be provided with abequate plinth protection all around the structure in a width starting from edge of the structure at GL and extending at least up to 1.0m beyond the vertical wall . The plith protection shall consist of 150mm thick PCC in M-15 grade concrete laid over 150mm thick layer of compacted soil. d)Providing at applying two coats of food grade epoxy paint on the inside surface of the roof slab and 600 mm height of the vertical wall giving. e) Successfully hydro test and water tightness test as per I.S code. f) Providing at applying three coats of anti-carbonation paint on the roof slab. g) Providing at applying three coats of cement-based paint on the remaining external surface area of the the structure. h) Providing and fixing SS-304 ventilator,SS-304 manhole frame and cover and SS-304 ladder from top slab to buttom slab inside container. Providing and fixing water level indicator( Float type) i) Providing and fixing MS section ladder from ground to top slab with safety cage. j) all ms parts to be painted with two coats of the enamelled paint over the primer coat of red oxide. k) Providing and fixing of 150mm wide water bar for the construction joints in the container. l) providing and fixing CI/DI puddle collars the vertical wall for connecting inlet, outlet, overflow and washout pipe of the reservoir. m) inlet, outlet, overflow and washout pipes and valves are not included in this work provision for the same shall be taken separately.
-
-
-
... More
Rate for RCC Ground level service reservoir seismic Zone-II & III and SBC 18 T/sqm.
-
-
-
... More
50 KL Capacity
50000
535500
10.71
... More
100 KL capacity
300000
2427000
8.09
... More
Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing and fixing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work.
-
-
-
... More
100 mm
18
40662
2259
... More
150 mm
8
25992
3249
... More
Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated DI D/F Resilient (Soft) seated Gate Valve EPDM Coated DI wedge 100% vaccum light, flange Dimention IS: 14846, of approved make PN 1.6 class and CI Tail Piece- 2 Nos. (IS: 5531- 1988- amended up to date- For CI Plane Ended Specials) of same size of following dia complete including all material like Instren Rubber Sheet of thickness- 6.00 mm (ISI Mark)- For Rubber Sheet), MS Nut Bolts (IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. (Nominal Dia. in mm)
-
-
-
... More
100 mm
8
92432
11554
... More
150 mm
2
38218
19109
... More
Construction of R.C.C. GLR Capacity 10 KL for (4 nos).
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
8
1424
178
... More
Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available :( Ordinary Rock)
7
1876
268
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
-
-
-
... More
M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
7.5
28852
3847
... More
M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size).
7.5
34080
4544
... More
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix
7.5
37005
4934
... More
Reinforced cement concrete work in walls (anythickness) including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars,piers, abutments, posts and struts etc. up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding cost of centering shuttering and reinforcement:1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20mm nominal size)
18.6
104327
5609
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Arches, arch ribs, domes, vaults, shells, folded plate, chimneys, shafts , roofs having slope more than 15º ,vertical and horizontal fins individually or forming box louvers, facias and eaves boards M20 grade Nominal Mix / Design Mix
5.6
31141
5561
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level.Hot rolled deformed bars (IS : 1139).
1400
107800
77
... More
Labour charges for cutting, bending for fabrication and binding reinforcement (plain or tor/ribbed/TMT steel) as per drawing and design for R.C.C. and R.B. work including cost of binding wire with all lead and lift up to floor five level complete.
1400
16800
12
... More
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
14
2198
157
... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Walls (any thickness) including attached pilasters,
buttresses plinth and string course.
174
50286
289
... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Arches, domes, vaults etc. up to 6 Mtr span.
37.4
32874
879
... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level forAdd extra for shuttering in circular work (in respective
centering and shuttering items) :(20% of respective Rate)
225.4
39625
175.8
... More
Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
400
38400
96
... More
Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance
4.4
2714
617
... More
Providing and fixing 1mm thick M.S. sheet garrage door shutters with frame of 40 x 40 x 6mm. angle iron 3mm M.S. gusset plates at the junction and corners including all fittings and applying a coat of approved steel primer : (Excluding cost of frames)Using flats 30 x 6mm for diagonal braces and central cross
piece.
1.4
4190
2993
... More
Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.
20
1280
64
... More
Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand
31
31744
1024
... More
Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding:New work (Two or more coats applied @ 3.84 kg/10 sqm)
300
15900
53
... More
P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc 80mm dia nominal bore
24
18528
772
... More
P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.25mm dia nominal bore
40
11120
278
... More
Providing, laying and jointing rising mains.
-
-
-
... More
Providing, lowering, laying in trenches, aligning, fixing in position and jointing in trenches Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS: 8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 incl. all taxes (Central and Local) transportation and frieght charges, inspection charges, loading/unloadingcharges, stacking of pipes including cost of labour and material, specials(Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer in Charge.( excluding earth work) with excise Duty Exemption. Note:- Providing and fixing of all requisite specials as per drawing, design and layout areinclusive in RM measurement of the item and shall not be paid separately.
-
-
-
... More
Dia (mm) Type Class
-
-
-
... More
100 DI K-7
9750
14274000
1464
... More
Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths Dl standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet and jointing as per IS: 5382 1985 such as tees, bends, tapers, caps etc. within trenches in DI pipe line complere including all marerial, labour, taxes, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (excluding earth work)
-
-
-
... More
AJS Tee , Bend, Reducer (All End Socketed)
-
-
-
... More
Upto 300 mm Diameter
500
72500
145
... More
Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6
-
-
-
... More
100MM
10
36660
3666
... More
Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated DI D/F Resilient (Soft) seated Gate Valve EPDM Coated DI wedge 100% vaccum light, flange Dimention IS: 14846, of approved make PN 1.6 class and CI Tail Piece- 2 Nos. (IS: 5531- 1988- amended up to date- For CI Plane Ended Specials) of same size of following dia complete including all material like Instren Rubber Sheet of thickness- 6.00 mm (ISI Mark)- For Rubber Sheet), MS Nut Bolts (IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. (Nominal Dia. in mm)
-
-
-
... More
Soft seated sluice valves
-
-
-
... More
Dia (mm) PN rating
-
-
-
... More
100 1.6
12
138648
11554
... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI single Air Valve Flanged/ Screwed type of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended upto date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 ,Float Guide- HBT1,Body seat ring - Leaded tin bronze/ SS , Seal ring and face ring - EPDM/NBR, Ends flanged according to IS:6418 or screwed type shall have external pipe threads conforming to IS:554, Fasteners - CS. All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work.
-
-
-
... More
25 mm S-1 Type
10
31450
3145
... More
Providing, lowering, laying, aligning, fixing in position in pipe line, DI resilient seated Non Return valves (NRV) of approved make PN 1.6 class and CI Tail Piece- 2 Nos. (IS: 5531 amended up to date- For CI Plane Ended Specials) of same size of following dia complete including all material like Instren Rubber Sheet of thickness- 6.00 mm (ISI Mark)- For Rubber Sheet), MS Nut Bolts (IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. (Nominal Dia. in mm)
-
-
-
... More
Dia (mm) PN rating
-
-
-
... More
100 1.6
9
113382
12598
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:
All kinds of soil
6
1200
200
... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :
-
-
-
... More
Walls (any thickness) including attached pilasters, buttresses plinth and string course.
60
17340
289
... More
roviding and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)
-
-
-
... More
Thermo-mechanically Treated bars (Conforming of relevent IS code)
120
9240
77
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix
10
56090
5609
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:
-
-
-
... More
All kinds of soil
1322.8
264560
200
... More
Ordinary rock
2303.4
840741
365
... More
Hard rock (requiring blasting)
1316.3
718699
546
... More
Hard rock(blasting prohibited)
871.1
681200
782
... More
Dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
150
113550
757
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
-
-
-
... More
M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
150
693600
4624
... More
Construction of Valve/ NRV Chambers
-
-
-
... More
Construction of RCC Sluice valve chamber for different type of valves including earthwork excavation, 100mm PCC M15 as leveling course, RCC M25 grade for base slab, side wall & cover slab , including cost of steel reinforcement , form work, Pre-cast, Plastic encapsulated CI/MS Foot Rest, MS flats for the support of pre-cast, proper curing of concrete work complete in all respect as per specifications and standard drawings and as directed by Engineer-in-Charge.
-
-
-
... More
For Class-A loading
-
-
-
... More
Sluice valve chamber of size1.13m x0.85m x1.27m for pipe size-upto100mm
10
298000
29800
... More
SITC of Bulk Flow Meter with removable mechanism class "B" confirming to ISO:4064:2005/ IS: 2373 of approved make of following dia sized pipelines and specifications complete: Media : Water (Clear ), Temp. 50 deg., Pr. rating: PN16, Protection type: IP- 68, Body Material : IS-210 Gr. FG-200, Accuracy Class :Class B (±2 % @ Nominal flow rate), Magnetic Drive, Dry Dial, Epoxy powder coated, Pulse out put option, Anti-magnetic protection including all materials and making connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge. Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
BFM 100 mm
7
108472
15496
... More
Providing & Installation pumpsets for pumping water from Open Wells and Tube wells .
-
-
-
... More
Supplying & installation 100 diameter sealed diaphragm bourden type pressure gauge of range 0 to 10 kg including all jointing material as per specification of safety cover.
7
8701
1243
... More
Providing, installing, testing and commissioning of double flanged bulk flow meter with removable mechanism, of class B conforming to ISO 4064/1 or amended upto date of approved make including cost of all material and labour as per specifications with GI Box (sheet 16 SWG) suitable with locking arrangement of following dia.
-
-
-
... More
50 mm dia
7
82607
11801
... More
Providing & Fixing of ISI Marked GI Bend 90 Degrees of following sizes including all jointing materials "B" Class
-
-
-
... More
50mm dia
12
2400
200
... More
Supply of MS clamp, set of 50x6 mm flat form iron with nuts and bolts etc. holding the riser pipe assembly of submersible pump set.
8
5568
696
... More
Supply & Fixing of ISi marked three core PVC flat submersible cable as per IS 694: 1990 or amended up to date and conductor as per class 5 of IS 8130: 1980 includ ing making connection etc.
-
-
-
... More
3 core 4.0 mm2
625
118125
189
... More
Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.
-
-
-
... More
Providing & Lowering in tube well ISI marked HDPE pipe as per IS 4984:1995 or amended up to date in PE 80 grade and class PN 10 of following dia. including HDPE/GI fittings and PVC rope confirming to IS 5175:1992 or amended up to date, along with clamping of submersible cable etc. complete in all respect.
-
-
-
... More
50 mm dia
380
51680
136
... More
63 mm dia
900
191700
213
... More
Construction of recharge structure (1 Nos).
-
-
-
... More
E/W in excavation over areas (exceeding 30 cm in depth,1.5 mtr. In width as well as 10 sqm on plan) including disposal of excavated earth lead up to 50m and lift up to 1.5 mtr. Disposed earth to be leveled and neatly dressed.
-
-
-
... More
(A) All kind of soil.
35
1225
35
... More
(B) Ordinary Rock.
16
4016
251
... More
Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering -All work up to plinth level.
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ).
0.3
990
3302
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ).
0.5
2312
4624
... More
Structural steel work in single section fixed without connecting plate including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr. height. In Flates, Tees, Angles, & Channel etc.
10
720
72
... More
Supply of Coarse Sand .
2.7
1890
700
... More
Providing and fixing Grevels
-
-
-
... More
(A) 6 mm nominal size Crusher broken.
1.5
1200
800
... More
(B) 20 mm nominal size Crusher broken.
1.5
1200
800
... More
(C) 100 mm hand broken.
2.5
1750
700
... More
(D) 300 mm hand broken.
18
9900
550
... More
Plaster on New surface on wall in cement sand mortar 1:3 including raking of Joints etc. complete fine finish. 20 mm thick.
16.5
3481
211
... More
Providing & Fixing Wire Mesh: 14 Mesh x 24.0 gauze
27
16659
617
... More
Random rubble dry stone kharanja under floor
8
7832
979
... More
Supply of ERW M.S. black casing pipe ISI marked {IS:1239(Part-1:2004)}
medium of following sizes at site of work.
-
-
-
... More
100 mm dia NB (Thickness of pipe 4.5 mm & mass of tube 12.50 Kg/m)
4
5144
1286
... More
Providing and Lowering of ISI mark Medium well PVC-U casing and screen
pipe (CM) as per IS : 12818 : 2010 or amended up to date having pipe thickness as per IS code suitable for bore well with threading , winding with superior
quality of plastic mesh & rope in three layers with end cap complete as per
technical specification and direction of Engineer In charge.
-
-
-
... More
125 mm nominal bore
3.5
2149
614
... More
STONE MASONARY FOR FOUNDATION
Random Rubble Stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in cement sand mortar 1:6 (1 cement : 6 sand)
3.5
9933
2838
... More
Provision for Solar Power generation at Proposed Open Well & Tube wells .
-
-
-
... More
Supply, installation, testing and commissioning of MNRE approved off Grid Solar Panels for running of motor pumps with 25 years of Linear Generation warranty, Work includes designing of solar panel area and MS fabricated structure 120 micron hot dip galvanized iron , showing arrangement of panel in available space and installation of PV module on frame structure such that minimum height of lower edge of panel shall be 4.0 mtr from ground level to safeguard against damage and theft as per indicative drawing enclosed with the bid document. The foundation of structure shall be in RCC. Mounting structure shall be suitably designed to withstand wind velocity up to 150km/hr. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for solar panel and mounting structure and suitable provision shall be included in tender document.
-
-
-
... More
Prop TW & Open well
35000
2100000
60
... More
Supply, installation, testing and commissioning of Remote monitoring unit on off grid solar controller for remote ON/OFF, parameter setting, monitoring and troubleshooting through mobile etc. complete. Web charges and data charges for 5 year during service warranty etc. complete in all respect as per technical specification and as per direction of Engineer.
6
274980
45830
... More
Providing, installation, testing and commissioning of AC submerssible pump sets with inbuilt or individual solar pump controller with Maximum power point tracking (MPPT) for optimally use the solar panel and maximize water discharge to deliver maximum water during the day including PVC flat submersible cable from controller to motor pumps..
Solar pump shall be of Stainless steel construction and performance shall be as per scope of work and minimum lift of water shall be as per defined in scope .
Pump controller shall have Adequate protection against dry operation of motor pump set, and against hails and storms. Full protection against open circuit, accidental short circuit and reverse polarity should be provided. A good reliable on/off switch be provided. The cable shall be ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date ( standard insulation) and conductor as per class 5 of IS 8130:1980 or amended up to date.
The duty condition of pump set shall be as per scope of work and entire work shall be executed as per technical specification and direction of Engineer in charge.
-
-
-
... More
2.2 KW (3.0 HP)
8
925432
115679
... More
3.7 KW (5.0 HP)
4
590340
147585
... More
5.5 KW (7.5 HP)
2
381230
190615
... More
Providing, laying and jointing Distribution Pipe Line.
-
-
-
... More
Providing, lowering, laying in trenches, aligning, fixing in position and jointing in trenches Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS: 8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 incl. all taxes (Central and Local) transportation and frieght charges, inspection charges, loading/unloadingcharges, stacking of pipes including cost of labour and material, specials(Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer in Charge.( excluding earth work) with excise Duty Exemption. Note:- Providing and fixing of all requisite specials as per drawing, design and layout areinclusive in RM measurement of the item and shall not be paid separately.
-
-
-
... More
Dia (mm) Type Class
-
-
-
... More
150 DI K-7
1200
2498400
2082
... More
100 DI K-7
5400
7905600
1464
... More
Providing,supplying,lowering & Laying in trenches,standerd lengths HDPE,PE-80 ISI Marked pipes of following grade and nominal diameter as per conferming IS-4984:1995 With necessory jointing material like mechanical connectors,i.e. thead/insert joint/quick release coupler joint/compression fitting joint or flanged joint and specials jointing pipe by butt fusion welding method,including all taxes (Central and local), transpotation and freight charges,inspection charges,loading /unloading charges ,stacking the same in closed shade duly protectingfrom sunrays and rains ,including cost of labour and material ,specials (Tee band etc) satisfactory hydraulic testing etc.Complete as per technical specifications and direction of engineer-in charge,(excluding earth work) . Note-Providing and fixing of all requsite specials as per drawing ,design and layout are inclusive in RM measurement of the item and shall not be paid seperately. supply upto 110mm dia coil & above 110mm dia straight length in 6M.
-
-
-
... More
110 mm dia PE-100 PN-6
1600
707200
442
... More
90 mm dia PE-100 PN-6
3000
792000
264
... More
75 mm dia PE-100 PN-6
13500
2511000
186
... More
63 mm dia PE-100 PN-6
3000
435000
145
... More
P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.
-
-
-
... More
B' Class(40mm)
1500
592500
395
... More
Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6
-
-
-
... More
100 mm dia.
12
47568
3964
... More
Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated DI D/F Resilient (Soft) seated Gate Valve EPDM Coated DI wedge 100% vaccum light, flange Dimention IS: 14846, of approved make PN 1.6 class and CI Tail Piece- 2 Nos. (IS: 5531- 1988- amended up to date- For CI Plane Ended Specials) of same size of following dia complete including all material like Instren Rubber Sheet of thickness- 6.00 mm (ISI Mark)- For Rubber Sheet), MS Nut Bolts (IS: 1363 Part I-1984- amended up to date), CI Detachable Joint (IS: 8794- 1988 amended up to date), labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. (Nominal Dia. in mm)
-
-
-
... More
Soft seated sluice valves
-
-
-
... More
Dia (mm) PN rating
-
-
-
... More
100 1.6
25
309725
12389
... More
80 1.6
30
300570
10019
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:
All kinds of soil
6
1200
200
... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :
-
-
-
... More
Walls (any thickness) including attached pilasters, buttresses plinth and string course.
60
17340
289
... More
roviding and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)
-
-
-
... More
Thermo-mechanically Treated bars (Conforming of relevent IS code)
120
9240
77
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix
6
33654
5609
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:
-
-
-
... More
All kinds of soil
3334.5
680238
204
... More
Ordinary rock
5001.8
1825657
365
... More
Hard rock (requiring blasting)
1667.25
910318
546
... More
Hard rock(blasting prohibited)
3334.5
3104419
931
... More
Dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
150.3
113777
757
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
-
-
-
... More
M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
150.3
694987
4624
... More
Construction of Valve/ NRV Chambers
-
-
-
... More
Construction of RCC Sluice valve chamber for different type of valves including earthwork excavation, 100mm PCC M15 as leveling course, RCC M25 grade for base slab, side wall & cover slab , including cost of steel reinforcement , form work, Pre-cast, Plastic encapsulated CI/MS Foot Rest, MS flats for the support of pre-cast, proper curing of concrete work complete in all respect as per specifications and standard drawings and as directed by Engineer-in-Charge.
-
-
-
... More
For Class-A loading
-
-
-
... More
Sluice valve chamber of size1.13m x0.85m x1.27m for pipe size-upto100mm
10
298000
29800
... More
Making Functional House Tap Connections ( FHTCs ).
-
-
-
... More
Providing Household Tap Connection as per technical specification and approved drawing and as per relevant IS code (amended up to date) from HDPE pipe line up to consumer meter/premises by using electro fusion saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including electrofusion saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or wheel valve and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) for and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipes with fittings in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level.
Note: Road cut and restoration is not part of this item and paid separately.
-
-
-
... More
For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.
771
1278318
1658
... More
P & F Bib cock (IS : 8931 mark), superior quality of approved make , brass 300-325 gm, 15 mm nominal bore.
771
239781
311
... More
Add extra over item no 1.21 & 1.22 for providing 20 mm PE 80 PN 16 as per ISO 4427 MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.
2500
110000
44
... More
OPERATION AND MAINTENANCE OF Rising Part of SCHEME for 5 Years.
-
-
-
... More
Maintenance of pipelines irrespective of size & material which includes Repairing of Bursts & leakages pollution control, survey & removal of choking, disconnection of illegal connections, Collection & recording minimum 10 nos. residual chlorine samples during daily supply timings, interconnections and all works related to pipeline network in existing distribution /rising main pipe lines of all sizes by digging out suitable size of pit in soft and loose soil/ hard soil including cutting of Black top, WBM & CC top of road of any size at work site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material to make repair leak proof and then refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. For entire job contractor will use their own T & P. Contractor with his own resources shall arrange de-watering,JCB & Tractor compressor if any and restore any amenity at his own cost damaged while performing the work in this item. The work includes daily patrolling and repair the leakages within stipulated time and complete maintenance of pipe line network of rising and distribution pipeline network within the scope of work for per km pipe line per month. Jointing material shall be provided by the department.
-
-
-
... More
Minimum labour for a following kms pipelines to be deployed.
-
-
-
... More
1 km to 50 km - one fitter-II & one beldar
37.7
29669
787
... More
Daily/ periodical operation of valves at supply times for specified by department per sluice valve per month. (Valve rod and cap to be arranged by contractor)
-
-
-
... More
80-300mm
12
14400
1200
... More
Maintenance of open wells which includes round the clock monitoring of open wells , complete repairs/ rewinding of submersible/Mono Block pump sets including cost of material components required to repair pump sets, starters, meters etc. of electric panal of tube wells, Lowering and unlowering of pump sets complete in all respect, maintenance of log-books & History sheet as directed by Engineer-in-charge for Open well per month.
-
-
-
... More
0.5 HP to 5.0 HP
7
26152
3736
... More
Maintenance of tubewells which includes complete repairs / rewinding of submersible pump sets including cost of material components required to repair pumpsets, starters, meters etc. of electric panel of tube wells, Lowering and unlowering of pumpsets complete in all respect, maintenance of Histroy sheet as directed by Engineer-in-charge for tubewell per month.
-
-
-
... More
0.5 HP to 5.0 HP
1
1736
1736
... More
For 60 months (5 Years)
1
4317474
4317474
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements