Public Health Engineering Department Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Public Health Engineering Department - PHED Tender
Civil And Construction
Building Construction
Water Storage And Supply
Eprocure
Opening Date19 May 2025
Closing Date18 Jun 2025
Tender Amount₹ 16,48,54,00,000
Costs
EMD
₹ 8,24,27,000Document Cost
₹ 2,500Tender Fee
₹ 50,000
Summary
Drinking Wsp For 1473vill Of Chittorgarh Pratapgarh Rajsamand Udaipur District From Jakhamdam Under Jjm Pkg2
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PHCJ_469963_1Tender No
ACEP-UDR-NIT No. 10/2024-25Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://eproc.rajasthan.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
200 mm dia
56864
3037
172695968
... More
250 mm dia
35299
4011
141584289
... More
350 mm dia
13197
6197
81781809
... More
400 mm dia
9498
7525
71472450
... More
450 mm dia
19491
8983
175087653
... More
700 mm dia
24409
17577
429036993
... More
Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in- charge.(excluding earth work)
Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
-
-
-
... More
100 mm dia
2009522
1464
2941940208
... More
150 mm dia
412977
2082
859818114
... More
200 mm dia
218967
2554
559241718
... More
250 mm dia
103641
3307
342740787
... More
300 mm dia
16257
4221
68620797
... More
350 mm dia
3541
5140
18200740
... More
400 mm dia
15710
6269
98485990
... More
600 mm dia
7078
11563
81842914
... More
700 mm dia
21573
15544
335330712
... More
800 mm dia
11440
19885
227484400
... More
900 mm dia
46838
24381
1141957278
... More
Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M.
HDPE PE-100 PN-6 (Dia in mm)
-
-
-
... More
63 mm dia
1552442
145
225104090
... More
75 mm dia
2033815
186
378289590
... More
90 mm dia
483582
264
127665648
... More
110 mm dia
357300
442
157926600
... More
Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work).
Note : Providing and fixing of all requisite specials as per
drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply of pipe shall be in straight length in 6/12 M.
-
-
-
... More
HDPE PE100 PN-6 (Dia in mm)
-
-
-
... More
125 mm dia
195255
573
111881115
... More
140 mm dia
141707
713
101037091
... More
160 mm dia
97289
897
87268233
... More
180 mm dia
44060
1125
49567500
... More
200 mm dia
20871
1348
28134108
... More
225 mm dia
3932
1697
6672604
... More
Providing, lowering, laying and jointing in trenches, standard lengths ISI marked Rigid PVC-O S/S Pipes (push on joints) as per IS-16647: 2017 (amended up to date) with EPDM Gasket seals on joints including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, laying of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter.
Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
-
-
-
... More
PVC-O pipe Class 500 PN-12.5
-
-
-
... More
110 mm dia
16206
757
12267942
... More
160 mm dia
67725
1281
86755725
... More
200 mm dia
18867
1462
27583554
... More
Manufacturing, supplying ,lowering, laying and jointing in position to correct line spirally welded SAW/Fabricated MS Pipe having bevelled end plates / coils, confirming to IS 3589-2001 or its latest revision/ amendments, for following thickness and inside diameter, including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.), field joints, satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge; (excluding earthwork, internal lining and outer coating). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
-
-
-
... More
1016 mm dia 8 mm thick
18160
23287
422904968.80349565
... More
Providing and applying 3LPE (3 Layer Polyethylene) tape coating conforming to ISO 21809-1, DIN 30670-91 or CAN/CSA Z245.20-10 to external surface of M.S. Pipe comprising of a layer of fusion bonded epoxy (FBE), overlaid with PE adhesive with an outer layer of high density polyethylene including preparation of surface by solvent cleaning, abrasive blasting to a finish of Grade 2.5 to DIN EN ISO 8501-1 and surface profile of 50 to 75 microns as per DIN EN ISO 8503-2. Minimum thickness of FBE shall be 250 microns including field joints coating at site complete as per technical specification and direction of Engineer-in-Charge.
Minimum thickness of coating shall be 3.0 mm on weld seam as well as remaining surface.
57964.14
1227
71121999.78
... More
Providing and applying Solvent free, two pack liquid epoxy lining to internal surface of M.S. Pipe as per BS 6920:2000 and AWWA C210 standard including preparation of internal surface of pipe by cleaning and abrasive blasting including field joints coating at site complete as per technical specification and direction of Engineer in In charge. Liquid Epoxy shall be NSF/WARS approved for drinking water and minimum thickness of lining shall be 406 microns.
57051.32
409
23333989.88
... More
Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing and fixing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work.
-
-
-
... More
Note: The rates for DI double flanged pipes shall be reduced 5%, if used other than OHSR pipes.
-
-
-
... More
100 mm
470
2146
1008643.5000000001
... More
150 mm
235
3086
725339.25
... More
200 mm
280
4037
1130500
... More
250 mm
178
5446
969450.3
... More
300 mm
54
6948
375208.2
... More
400 mm
8
10192
81540.4
... More
450 mm
15
12051
180775.5
... More
600 mm
8
18808
150464.8
... More
700 mm
8
24263
194111.6
... More
MS Pipe
-
-
-
... More
914 mm
8
20932
167456
... More
1016 mm
23
29053
668219
... More
Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work.
-
-
-
... More
100 mm dia
7975.30000000001
2259
18016202.70000002
... More
150 mm dia
4562.7
3249
14824212.299999999
... More
200 mm dia
1505.4
4250
6397950
... More
250 mm dia
1027.1
5733
5888364.3
... More
300 mm dia
557.8
7314
4079749.1999999997
... More
Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-incharge.
MS pipe specials above 600mm dia (with minimum 6.3mm thickness sheet)
139287.07
126
17550170.82
... More
Supply laying and pushing of MS casing pipe of specified thickness approved by concerned department authority by trenchless method adopting any suitable technology below ground at required depth under running traffic condition as per Highway/ Railway standard including carrying out survey work at the job site for determining underground cable trenches like telephone, cable, water & sanitary lines and resistivity test for finding the soil strata using necessary equipments for completion of works, mobilizing of machineries and specialized crew at the job site complete in all respect, including excavation of driven pit and exit pit (up to 3 meter depth) with proper protection at these sites with shoring sheets and ISMB. Providing MS cutting edges for front shield and constructing thrust bed at designated level. Necessary dewatering and providing concrete foundation at the base of the driven pit, PVC/Rubber saddle as per the requirement of Highway/Railway authority, crane for handing of pipe and any other machinery, tools, and tackles required, construction of temporary works as per design, drawing and method as per approved by authority specification and the direction of the Engineer.
Apply corrosion, resistant, protection on inside and outside of casing pipe as per technical specification.
-
-
-
... More
300mm Dia 8 mm thick casing pipe with protective coating.
2759
18353
50635927
... More
400mm Dia 8 mm thick casing pipe with protective coating.
300.5
20972
6302086
... More
500mm Dia 8 mm thick casing pipe with protective coating.
54.5
23569
1284510.5
... More
700mm Dia 8 mm thick casing pipe with protective coating.
40
33457
1338280
... More
Providing, laying and jointing RCC NP4 jacking pipe (with steelpushing collar) with suitable leak proof joints (with using `12mmMDF sheets etc.) with compliance for maintaining slope as perdesign by trenchless method adopting Micro tunnelling method orany suitable mechanical technology below ground at all depth underrunning traffic condition including carrying out survey work at the jobsite for determining underground cable trenches like telephone,power cable, water & sanitary lines and resistivity tests for findingthe soil strata using necessary equipment’s for completion of work,mobilizing of machineries and specialized crew at the job site, etc.complete in all respects, including excavation of drive pit and exit pit(upto 3 metre depth) with proper protection at the three sides,providing and casting of MS cutting edges for front shield andconstructing thrust bed at designed level as directed by theEngineer, necessary de-watering and providing concretefoundations at the base of the Drive pit, crane for handling of pipes,and any other machinery, tool & tackles required, construction oftemporary works as per requirement complete in all respect (alldepths) with all lead and lifts, as per specification and the directionof the Engineer. Note- 1. Manual Pipe jacking is not permitted forworkmen safety reasons. 2. Length of pipe shall be measured inbetween the outer wall of two manholes / Inspection chambers. Pipein the manhole/inspection chamber’s wall shall deemed to beincluded in the item of manhole/inspection chamber shall not bepayable
-
-
-
... More
1000mm dia RCC pipe
21
45300
951300
... More
1600mm dia RCC pipe
29
72800
2111200
... More
Supply and Pushing of MS casing pipe of specified thickness bytrenchless method adopting micro-tunnelling or any suitablemechanical technology or technology approved by Railway belowground at all depth under running traffic condition as per railwaystandard including carrying out survey work at the job site fordetermining underground cable trenches like telephone, cable, water& sanitary lines and resistivity test for finding the soil strata usingnecessary equipment’s for completion of works, mobilizing of machineries and specialized crew at the job site complete in allrespect, including excavation of driven pit and exit pit (upto 3 metredepth) with proper protection at three sites with shoring sheets andISMB's. Providing MS cutting edges for front shield and Constructingthrust bed at designated level. Necessary de-watering and providingconcrete foundation at the base of the driven pit, PVC/Rubbersaddle as per the requirement of Railway Authority, crane forhanding of pipe and any other machinery, tools, and tacklesrequired, construction of temporary works as per requirement and asper approved by railway authorities, specification and the direction ofthe Engineer. (Protective coating/ lining if done that will be paidextra) Note- 1. Manual Pipe jacking is not permitted for workmensafety reasons. 2. Length of pipe shall be measured in betweenthe outer wall of two manholes / Inspection chambers. Pipe in themanhole/inspection chamber’s wall shall deemed to be included inthe item of manhole/inspection chamber shall not be payable
-
-
-
... More
1000 mm dia 14 mm thick casing pipe
50
270800
13540000
... More
1600 mm dia 22 mm thick casing pipe
50
447800
22390000
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.
-
-
-
... More
In all types of Soils
-
-
-
... More
upto 1.5 m
2881160.63
200
576232126
... More
Above 1.5 mtr and up to 3.0 mtr.
27108.12
220
5963786.399999999
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and stacking serviceable materials for measurements and disposal of unserviceable materials as directed within a lead of 50 Mtr. including required all safety provisions etc.:
-
-
-
... More
In Soft Rock
-
-
-
... More
upto 1.5 m
589786.13
365
215271937.45
... More
Above 1.5 mtr and up to 3.0 mtr.
24096.11
402
9686636.22
... More
In Hard Rock (Blasting Required)
-
-
-
... More
upto 1.5 m
153636.22
546
83885376.12
... More
Above 1.5 mtr and up to 3.0 mtr.
6024.03
583
3512009.4899999998
... More
In Hard Rock (blasting prohibited)
-
-
-
... More
upto 1.5 m
205594
782
160774508
... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI Double Acting Kinetic Air Valve with isolating Sluice Valve of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended upto date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 , Float Guide- HBT1.HP Orifice- HTB2/ SS,Body seat ring - Leaded tin bronze/ SS .Seal ring and face ring - EPDM/NBR ,Ends flanged according to IS 6418,Fastners - CS, Epoxy paint inside outside of food grade safe for drinking water ,Valves including all mateial, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work.
-
-
-
... More
Class PN 1.0
-
-
-
... More
50 mm dia
909
13234
12029706
... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, DI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(amended up to date) Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865, FloatLP ball & HP ball : AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR ,HP Orifice & HP orifice plug : Bronze/ SS ,Bush: Bronze ,Flanges as per IS/ BS, Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside .Fasteners - CS/ Galvanised steel, Outlet of big orifice will have a screen to prevent Tamper of float, with DI metal seated D/F Non rising stem. Sluice Valves as per (IS: 14846 amended upto date) PN 1.6 ratings. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work
Class PN 1.6
-
-
-
... More
50 mm dia
1433
13499
19344067
... More
80 mm dia
78
17236
1344408
... More
100 mm dia
53
23449
1242797
... More
150 mm dia
76
40162
3052312
... More
Construction of RCC pillar for following size of air valves including earthwork excavation, RCC M25 grade for base slab, vertical pillar, including cost of steel reinforcement ,GI (class-B)/MS vertical pipe, form work, proper curing of concrete work complete in all respect as per standard specifications and drawings and as directed by Engineer.
-
-
-
... More
Air valve pillar for air valves size of 80mm dia
2304
19800
45619200
... More
Air valve pillar for air valves size of 100mm dia
53
21800
1155400
... More
Air valve pillar for air valves size of 150mm dia
76
30400
2310400
... More
Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
Manually Operated CI Sluice valve of Class PN-1.0
-
-
-
... More
80 mm dia
1799
6301
11335499
... More
100 mm dia
1552
8649
13423248
... More
125 mm dia
326
11173
3642398
... More
150 mm dia
356
13595
4839820
... More
200 mm dia
79
22603
1785637
... More
250 mm dia
29
35722
1035938
... More
300 mm dia
4
45382
181528
... More
Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirfing to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
Manually Operated Resilient Seated Sluice Valves of Class PN 1.6
-
-
-
... More
80 mm dia
4
9137
36548
... More
100 mm dia
1441
11554
16649314
... More
125 mm dia
2
17087
34174
... More
150 mm dia
540
19109
10318860
... More
200 mm dia
252
29396
7407792
... More
250 mm dia
150
48781
7317150
... More
300 mm dia
49
62128
3044272
... More
350 mm dia
15
116573
1748595
... More
400 mm dia
2
152675
305350
... More
500 mm dia
3
262134
786402
... More
600 mm dia
1
385252
385252
... More
700 mm dia
19
717167
13626173
... More
900 mm dia
4
1400382
5601528
... More
1000 mm dia
4
1834316
7337264
... More
1100 mm dia
1
1022035
1022035.08
... More
Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2 1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS AISI 316/410 Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge.Note: Rates are exclusive of tail piece/dismantling joints and earth work.
Motorized Sluice Valves with Electric Actuator and integral starter of Class PN1.6 At individual delivery
-
-
-
... More
100 mm dia
358
124743
44657994
... More
150 mm dia
68
139701
9499668
... More
200 mm dia
10
155351
1553510
... More
300 mm dia
10
193924
1939240
... More
Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) short body pattern type double eccentric Butterfly valves of approved make of following class & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body, disc and end cover of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per DIN 3202 F4/ IS 13095 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside. Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/316 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR "O "ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvenised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
Class PN 1.6, Manually Operated with Gear
-
-
-
... More
350 mm dia
6
93544
561264
... More
400 mm dia
13
123339
1603407
... More
450 mm dia
11
156591
1722501
... More
600 mm dia
19
243762
4631478
... More
700 mm dia
16
333978
5343648
... More
800 mm dia
5
444787
2223935
... More
900 mm dia
19
576157
10946983
... More
1000 mm dia
8
750935
6007480
... More
Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) short body pattern type double eccentric Butterfly valves of approved make of following class & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body, disc and end cover of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per DIN 3202 F4/ IS 13095 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside. Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/316 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR "O "ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvenised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
Class PN 1.6, Motorised Operated
-
-
-
... More
350 mm dia
6
216062
1296372
... More
450 mm dia
3
284669
854007
... More
600 mm dia
17
368293
6260981
... More
700 mm dia
2
477060
954120
... More
800 mm dia
2
618656
1237312
... More
900 mm dia
2
744804
1489608
... More
Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) Swing type Non Return Valve of approved make of following Pressure rating & dia complete, generally confirming to IS: 5312 (part -1)/ 2004 (amended up to date) and of following specifications: Body, Bonnet & disc of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per IS 5312 (part -1):2004 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body, cover and disc inside and outside . Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS.Shaft of SS- AISI- 410, Hinge SS AISI 316/410 ,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O "ring seal Nut-Bolt confirming to IS:1363 and IS: 1367 (galvenised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
At Individual Delivery
Class PN 1.6
-
-
-
... More
100 mm dia
180
12598
2267640
... More
150 mm dia
34
21821
741914
... More
200 mm dia
8
37011
296088
... More
300 mm dia
2
76588
153176
... More
350 mm dia
6
128442
770652
... More
450 mm dia
3
214721
644163
... More
600 mm dia
15
337993
5069895
... More
Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning Technical Specifications and as per direction of Engineer. Class PN 1.0
-
-
-
... More
80 mm dia
1799
3149
5665051
... More
100 mm dia
2476
3666
9077016
... More
125 mm dia
326
4792
1562192
... More
150 mm dia
748
5758
4306984
... More
200 mm dia
263
8564
2252332
... More
250 mm dia
119
11729
1395751
... More
300 mm dia
35
14024
490840
... More
350 mm dia
6
18247
109482
... More
Providing, lowering, laying, aligning, fixing in position and jointing MS dismantling joint (Fabricated Steel) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning Technical Specifications and as per direction of Engineer.
-
-
-
... More
80 mm dia
4
4234
16936
... More
100 mm dia
875
5131
4489625
... More
125 mm dia
2
6799
13598
... More
150 mm dia
216
9584
2070144
... More
200 mm dia
78
11816
921648
... More
250 mm dia
60
15313
918780
... More
300 mm dia
24
19121
458904
... More
350 mm dia
9
26798
241182
... More
400 mm dia
15
35805
537075
... More
450 mm dia
8
42109
336872
... More
500 mm dia
3
51137
153411
... More
600 mm dia
7
65372
457604
... More
700 mm dia
37
92761
3432157
... More
800 mm dia
7
119543
836801
... More
900 mm dia
25
154893
3872325
... More
1000 mm dia
12
183534
2202408
... More
1100 mm dia
1
214847
214847.16
... More
Providing, installation, testing and commissioning of following Stain less steel AISI 304 Expansion bellows of 10/16 bar rating with tie rods as per technical specifications and layout drawings including jointing material like nuts, bolts, rubber gaskets etc. complete in all respect as per technical specification and as per direction of Engineer.
-
-
-
... More
300 mm dia
4
19614
78456
... More
350 mm dia
12
23698
284376
... More
450 mm dia
6
35941
215646
... More
600 mm dia
30
69331
2079930
... More
Construction of RCC Scour valve chamber dry type for different type of valves including earthwork excavation, 100mm PCC M15 as leveling course, RCC M25 grade for base slab, side wall & cover slab , including cost of steel reinforcement , form work, Pre-cast, Plastic encapsulated CI/MS Foot Rest, MS flats for the support of pre-cast, proper curing of concrete work complete in all respect as per specifications and standard drawings and as directed by Engineer-in-Charge.
For Class-A loading
-
-
-
... More
Scour valve chamber of size1.13m x0.85m x1.95m
for connecting pipe size-upto100mm
289
33147
9579483
... More
Scour valve chamber of size1.175m x0.95m x2.25m
for connecting pipe size-more than 100 mm & upto150mm
4
35148
140592
... More
Scour valve chamber of size1.2m x1.08m x2.45m
for connecting pipe size-more than 150 mm & upto200mm
1
42804
42804
... More
Sluice valve chamber of size1.26m x1.185m x1.82m
for pipe size-from 200-to-300mm
24
43500
1044000
... More
Construction of RCC Sluice valve chamber for different type of valves including earthwork excavation, 100mm PCC M15 as leveling course, RCC M25 grade for base slab, side wall & cover slab , including cost of steel reinforcement , form work, Pre-cast, Plastic encapsulated CI/MS Foot Rest, MS flats for the support of pre-cast, proper curing of concrete work complete in all respect as per specifications and standard drawings and as directed by Engineer-in-Charge.
For Class-A loading
-
-
-
... More
Sluice valve chamber of size1.13m x0.85m x1.27m for pipe size-upto100mm
1702
29800
50719600
... More
Sluice valve chamber of size1.17m x0.95m x1.415m
for pipe size-from 125-to-150mm
691
33500
23148500
... More
Sluice valve chamber of size1.26m x1.185m x1.82m
for pipe size-from 200-to-300mm
359
43500
15616500
... More
Sluice valve chamber of size1.39m x1.43m x2.185m
for pipe size-from 350-to-450mm
26
55800
1450800
... More
Sluice valve chamber of size1.61m x1.75m x2.795m
for pipe size-from 500-to-700mm
24
78900
1893600
... More
Sluice valve chamber for pipe size-from 700-to-1000mm
39
122344
4771416
... More
Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work.
-
-
-
... More
Bituminous courses
50398.44
416
20965751.04
... More
Granular courses
75597.68
296
22376913.279999997
... More
Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
188712.53
757
142855385.21
... More
Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.
157055.71
4678
734706611.38
... More
Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.
-
-
-
... More
Plain cement concrete pavement of M-30 Grade
-
6497
-
... More
Removing & Re-fixing of Bricks Kharanja road by manual means for laying of pipe line, stacking of serviceable & unserviceable material separately, disposal of dismantled material lead up to 50 mtr. The Bricks interlocking be laid on average 12 mm thick bed of mud mortar and the joints to be filled with pointing in cement mortar 1:3. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the direction of Engineer in charge. The rates are inclusive of fixing of 80 percent reusable Bricks and cost of required new First class FPS bricks (min. 10.5 Mpa) in place of damaged bricks, all lead and lift as per Technical Specifications and direction of Engineer in Charge. Note: If existing bricks used more than 80%, than for every 1% above 80% use, deduction of 1% in cost shall be done for every 1% use above 80%.
-
-
-
... More
Horizontal aligned Bricks
237046.02
212
50253756.239999995
... More
Surge Proctection
1
25000000
25000000
... More
Cathodic proctection
1
22000000
22000000
... More
SITC of Bulk Flow Meter with removable mechanism class "B" confirming to ISO:4064:2005/ IS: 2373 of approved make of following dia sized pipelines and specifications complete: Media : Water (Clear ), Temp. 50 deg., Pr. rating: PN16, Protection type: IP- 68, Body Material : IS-210 Gr. FG-200, Accuracy Class :Class B (±2 % @ Nominal flow rate), Magnetic Drive, Dry Dial, Epoxy powder coated, Pulse out put option, Anti-magnetic protection including all materials and making connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge.
Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
80 mm dia
106
12688
1344928
... More
100 mm dia
322
15496
4989712
... More
125 mm dia
118
21528
2540304
... More
150 mm dia
113
24022
2714486
... More
200 mm dia
14
30414
425796
... More
SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU) , Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge.
Note: Rates are exclusive of tail piece / dismantling joints and earth work. (AT INLET PIPE OF CWR)
-
-
-
... More
100 mm
245
113454
27796230
... More
150 mm
47
139687
6565289
... More
200 mm
15
141972
2129580
... More
250 mm
14
177439
2484146
... More
300 mm
7
219283
1534981
... More
400 mm
1
275303
275303
... More
600 mm
2
520970
1041940
... More
700 mm
2
565664
1131329.76
... More
800 mm
1
595353
595353
... More
900 mm
2
634054
1268108.16
... More
1000 mm
1
755457
755457.12
... More
Construction of Flow Meter Chamber
39
112500
4387500
... More
Providing, lowering, aligning & fixing in position DI D/F Plunger Type Flow Control Valve of approved make of following Pressure rating & dia complete and of following specifications: Body- Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or EN-JS 1030, Plunger/ Piston - Stainless steel AISI- 304/ Gr 1.4301, Piston Guides- Bronze Welded Overlay / SS Shaft/Crank/Spindle- Stainless steel AISI- 410/ Gr 1.4021 Body Seat Ring- Stainless steel AISI- 316/304/ Bronze IS:318- LTB2 ,Seal ( O- ring / Quad ring)- EPDM/ NBR, Bearing Bush - Bronze IS:318- LTB2,Slotted cylinder / Strainer / Diffuser- AISI- 420/ 304,Nut- Bolts - SS, Face to Face- as per ANSI B 16.1/ EN 558-1 and Flange ends should be as per ANSI B-16.5, Class 150 and Class 300/ EN-1092-2. Insertion rubber of black EPDM 6mm thick ,Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied both inside and outside . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer-In- Charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
100 mm dia
76
368438
28001288
... More
150 mm dia
13
450548
5857124
... More
200 mm dia
2
552018
1104036
... More
250 mm dia
2
645671
1291342
... More
Construction of boundary wall of Brick/ stone masonary as per enclosed GA drawing, scope of work and technical specifications complete work in all respect. Brief details of boundary wall parameter is as below:
1. Depth of foundation- 900 mm.
2. PCC in M-10, width -900 mm and thickness 100 mm,
3. Stone masonary in CM: 1:6 section of foundation above PCC, 600 mm (W )x 450 mm (D) and 450 mm (W) x 450 mm (D) 4. Superstructure work: Stone masonary in CM: 1:6, W-300, height-1650 mm,/ Brick work in CM: 1:6 W-230 mm, height- 1650 mm.
5. Cement mortar pointing on Stone masonary and cement mortar plaster 20 mm thick on brick masonary in CM 1:6.
6. Expansion joint shall be on every 30 mtr.
7. On top of wall there shall be CC Coping 75 mm thick (1:2:4) shall be provided.
8. Pillar for main gate 350x350 mm in size is part of boundary wall.
9. Cement paint of approved colour in 3 coat shall be done.
38160
5820
222091200
... More
Providing and fixing steel, gate, grating and grills made of angles, tees, square bars, flats or black pipe with hold fast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide and two coat of enamal paints.
54350
121
6576350
... More
Construction of Village Transfer Chambers Room Type-A
337
76933
25926421
... More
Construction of Village Transfer Chambers Room Type-B
337
89411
30131507
... More
Providing, Supplying and fixing of D/F DI Pressure Reducing Valve in pipe line including jointing etc. complete as per standard/ technical specification and direction of Engineer-in-Charge
-
-
-
... More
100 mm dia
9
57200
514800
... More
150 mm dia
5
76700
383500
... More
200 mm dia
1
108600
108600
... More
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix
1493.608
5073
7577073.384
... More
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
3860.78296522733
157
606142.9255406908
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code)
46899.29
77
3611245.33
... More
Construction of RCC (Dome type) Clear Water Reservoir of following capacity as per Scope of work and Technical specification, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. .
b) Excavation in all types of soil, PCC below foundation & all RCC Work including all labour and material charges including providing and fixing of accessories such as SS ladder, SS manhole frame and covers, water level indicator (float type), SS ventilator with SS screen, float valve, puddle collars, G.I. pipe railing around walk way, Top Dome/Slab, Staircase.
c) CWR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the vertical wall of CWR. The plinth protection shall consist of 150mm thick PCC in M-15 concrete over 150mm thick compacted soil fill.
d) Providing and applying two coats of food grade epoxy paint on the inside surface of the roof slab, and 600 mm height of the vertical wall. e) Successful hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the roof Slab.
g) Providing and applying three coats of cement-based paint on the remaining external surface area of the structure.
-
-
-
... More
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS 304 ladder from roof slab to bottom Slab, inside container. Providing and fixing water level indicator (Float type).
i) Providing and fixing MS ladder from ground to top slab. j) All MS parts to be painted with two coats of the enamelled paint over the primer coat of red oxide.
k) Providing and fixing of 150mm wide water bar for the construction joints in the container.
l) Providing and fixing CI/DI puddle collars the vertical wall for connecting inlet, outlet, overflow and washout pipes of the reservoir.
m) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC Partially Underground type clear water reservoir SBC 7 T/sqm, SEISMIC ZONE2,3 & 4
-
-
-
... More
IPS-11 Banda
850000
5
4301000
... More
CPS-21 KHODIYAN
700000
5
3654000
... More
CPS-20 NEEMARI
600000
5
3185999.9999999995
... More
CPS-24 Heenta
700000
5
3654000
... More
CPS-25 KHERODA
400000
6
2604000
... More
CPS-23 SANGRAM PURA
400000
6
2604000
... More
CPS-27 MANDESAR
600000
5
3185999.9999999995
... More
CPS-28 Ranchorpura
850000
5
4301000
... More
CPS-29 WANGRODA
800000
5
4128000
... More
CPS-32 MOTI KHERI
600000
5
3185999.9999999995
... More
CPS-33 Basani
550000
5
2920500
... More
CPS-39 KUNWARIYA
450000
5
2511000
... More
CPS-38 RAJAWAS
350000
6
2278500
... More
CPS-35 KURAJ
500000
5
2790000
... More
CPS-36 Sadri
600000
5
3185999.9999999995
... More
CPS-41 KELWA
850000
5
4301000
... More
CPS-40 TASOL
850000
5
4301000
... More
CPS-44 NEAR TUKRAKHURD
450000
5
2511000
... More
CPS-46 Sardargarh
1000000
4
4980000
... More
CPS-49 BHAWARON
350000
6
2278500
... More
CPS-52 Dhodiwas
700000
5
3654000
... More
CPS-50 BHILWARI
350000
6
2278500
... More
Construction of RCC (Flat slab type) Clear Water Reservoir of following capacity as per the Scope of work and Technical specification, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation & all RCC Work including all labour and material charges including providing and fixing of accessories such as SS ladder, SS manhole frame and covers, water level indicator (float type), SS ventilator with SS screen, float valve, puddle collars, G.I. pipe railing around walk way, Top Dome/Slab, Staircase.
c) CWR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the vertical wall of CWR. The plinth protection shall consist of 150mm thick PCC in M-15 concrete over 150mm thick compacted soil fill.
d) Providing and applying two coats of food grade epoxy paint on the inside surface of the roof slab, and 600 mm height of the vertical wall. e) Successful hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the roof Slab.
g) Providing and applying three coats of cement-based paint on the remaining external surface area of the structure.
-
-
-
... More
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS 304 ladder from roof slab to bottom Slab, inside container. Providing and fixing water level indicator (Float type).
i) Providing and fixing MS ladder from ground to top slab. j) All MS parts to be painted with two coats of the enamelled paint over the primer coat of red oxide.
k) Providing and fixing of 150mm wide water bar for the construction joints in the container.
l) Providing and fixing CI/DI puddle collars the vertical wall for connecting inlet, outlet, overflow and washout pipes of the reservoir.
m) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC Partially Underground type clear water reservoir SBC 7 T/sqm, SEISMIC ZONE-2,3 & 4
-
-
-
... More
CPS-31 BIKARNI
150000
7
1071000
... More
CPS-45 VEEDO KI BHAGAL
200000
6
1316000
... More
CPS-48 MURDA
150000
7
1071000
... More
CPS-47 BADA
200000
6
1316000
... More
CPS-53 KUKDA KHATI
200000
6
1316000
... More
CPS-42 KANAWARA
150000
7
1071000
... More
CPS-51 NARUJI KA GUDA
200000
6
1316000
... More
Design & Construction of clear water reservoirs of required capacity at following places, including itspiping, fittings, etc complete in all respect as perthe scope of work & specifications given in the tender document for the following sizes
-
-
-
... More
IPS-7 DHARTA
8300000
4
34030000
... More
IPS-8 Mavli
2550000
4
11602500
... More
IPS-9 Mehanduriyai
2150000
4
9782500
... More
IPS-10 DUM KHERA
1950000
5
10140000
... More
CPS-22 Vanai Talai
1350000
5
7897499.999999999
... More
CPS-26 Bhatewar
1850000
5
9620000
... More
CPS-30 Noorda
2000000
5
10400000
... More
CPS-34 Railmagra
1300000
5
7605000
... More
CPS-37 MOHI
1350000
5
7897499.999999999
... More
CPS-43 PUTHOL
1050000
5
6142500
... More
Construction and commissioning of RCC INTZE type Over Head Service Reservoir of following capacity and staging as per the Scope of work and Technical specifications, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc.
c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR. The plinth protection shall consist of 150mm thick PCC in M-15 grade concrete laid over 150mm thick layer of compacted soil. d) Providing and applying two coats of food grade epoxy paint on the inside surface on the top dome, edge beam and 600 mm height of the vertical wall.
e) Conducting successfully hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the top surface of the Top Dome.
g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc..
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top dome/Slab to bottom dome/Slab inside container. i) Providing and fixing of MS section ladder from the last landing to balcony having railing all around it and MS ladder with safety cage from balcony to top dome/slab.
j) Providing and fixing water level indicator (float type).
-
-
-
... More
k) Providing and fixing of hand railing all around the balcony, top dome and staircase consisting of 25mm diameter Class-B GI pipe in two rows and 1000 mm high, 50X50X6mm angle iron vertical post at a maximum spacing of 1500mm centres.
l) All MS parts to be painted with two coats of the enamel paint over the primer coat of red oxide.
m) Providing and fixing of 150mm wide PVC water bar for the construction joints in the container (vertical wall & cone wall).
n) Providing one Aluminium portable ladder of appropriate length to access first landing (3.5 to 4.5m above GL) from ground.
o) Lighting arrestor consisting of providing and fixing of 2 Nos. of chemical earthing and connecting it to the conical cover of SS ventilator with two separate GI strips of 50mmX3mm.
p) CI/DI puddle collar shall be fixed in the bottom dome/ slab for connecting inlet, outlet, overflow and washout pipe of the reservoir.
q) Painting the name of the scheme and other details on the reservoir, and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.
r) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II 18 M Staging
-
-
-
... More
100 KL, staging Height 18 m (36-Nos.)
3600000
27
99108000
... More
150 KL, staging Height 18 m (40-Nos.)
6000000
21
127320000
... More
200 KL, staging Height 18 m (10-Nos.)
2000000
18
37860000
... More
250 KL, staging Height 18 m (9-Nos.)
2250000
18
40635000
... More
300 KL, staging Height 18 m (3-Nos.)
900000
17
16172999.999999998
... More
350 KL, staging Height 18 m (2-Nos.)
700000
14
10437000
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II 20 M Staging
-
-
-
... More
100 KL, staging Height 20 m (5-Nos.)
500000
30
15005000
... More
150 KL, staging Height 20 m (7-Nos.)
1050000
23
24192000
... More
200 KL, staging Height 20 m (4-Nos.)
800000
20
16144000
... More
250 KL, staging Height 20 m (3-Nos.)
750000
19
14317500
... More
300 KL, staging Height 20 m (1-Nos.)
300000
18
5670000
... More
350 KL, staging Height 20 m (1-Nos.)
350000
16
5873000
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II 22 M Staging
-
-
-
... More
100 KL, staging Height 22 m (4-Nos.)
400000
32
12924000
... More
150 KL, staging Height 22 m (6-Nos.)
900000
24
21843000
... More
200 KL, staging Height 22 m (4-Nos.)
800000
21
17128000
... More
250 KL, staging Height 22 m (1-Nos.)
250000
20
5067500
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II 24 M Staging
-
-
-
... More
100 KL, staging Height 24 m (1-Nos.)
100000
33
3360000
... More
150 KL, staging Height 24 m (3-Nos.)
450000
25
11358000
... More
200 KL, staging Height 24 m (1-Nos.)
200000
22
4454000
... More
250 KL, staging Height 24 m (2-Nos.)
500000
21
10540000
... More
Construction and commissioning of RCC flat slab Over Head Service Reservoir of following capacity and staging including all material and labour charges as per the Scope of work and Technical Specification, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc.
c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR. The plinth protection shall consist of 150mm thick PCC in M-15 grade concrete laid over 150mm thick layer of compacted soil. d) Providing and applying two coats of food grade epoxy paint on the inside surface roof slab, and 600 mm height of the vertical wall.
e) Successfully hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the top surface of the roof slab.
g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc.
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top Slab to bottom Slab inside container. i) Providing and fixing of MS section ladder from the last landing to balcony and MS ladder with safety cage from balcony to top slab.
-
-
-
... More
j) Providing and fixing water level indicator (float type).
k) Providing and fixing of hand railing all around the balcony, roof and staircase, consisting of 25mm diameter Class-B GI pipe in two rows and 1000 mm high, 50X50X6mm angle iron vertical post at a maximum spacing of 1500mm centres.
l) All MS parts to be painted with two coats of the enamel paint over the primer coat of red oxide.
m) Providing and fixing of 150mm wide PVC water bar for the construction joints in the container (vertical wall & cone wall).
n) Providing one Aluminium portable ladder of appropriate length to access first landing (3.5 to 4.5m above GL) from ground.
o) Lighting arrestor consisting of providing and fixing of 2 Nos. of chemical earthing and connecting it to the conical cover of SS ventilator with two separate GI strips of 50mmX3mm
p) CI/DI puddle collar shall be fixed in the bottom/slab for connecting inlet, outlet, overflow and washout pipe of the reservoir.
q) Painting the name of the scheme and other details on the reservoir, and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.
r) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II & STAGING 15 M
-
-
-
... More
50 KL, staging Height 15 m (33-Nos.)
1650000
38
62963999.99999999
... More
Construction of RCC Dome type Ground Level Service Reservoir (GLSR) of following capacity as per the Scope of work and Technical specifications, consisting of the following
main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction.
b) Excavation in all types of soil, PCC below foundation & all RCC Work.
c) All the GLSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the vertical wall. The plinth protection shall consist of 150mm thick PCC in M-15 concrete over 150mm thick compacted soil fill.
d) Providing and applying two coats of food grade epoxy paint on the inside surface of the roof slab, and 600 mm height of the vertical wall giving.
e) Successful hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the roof Slab.
g) Providing and applying three coats of cement-based paint on the remaining external surface area of the structure.
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS 304 ladder from top bottom Slab inside container. Providing and fixing water level indicator (Float type).
-
-
-
... More
i) Providing and fixing MS ladder from ground to top slab with safety cage.
j) All MS parts to be painted with two coats of the enamelled paint over the primer coat of red oxide.
k) Providing and fixing of 150mm wide water bar for the construction joints in the container.
l) Providing and fixing CI/DI puddle collars the vertical wall for connecting inlet, outlet, overflow and washout pipe of the reservoir.
m) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC GROUND LEVEL SERVICE RESERVOIR SEISMIC ZONE-II & III and SBC18T/sqm
-
-
-
... More
50 KL capacity (2-Nos.)
100000
10
1071000
... More
100 KL capacity (2-Nos.)
200000
8
1618000
... More
150 KL capacity (1-Nos.)
150000
6
1023000
... More
200 KL capacity (2-Nos.)
400000
6
2516000
... More
Construction of Pump house of RCC framed structure with pump pit in RCC walls as per scope of work and technical specification complete work in all respect including electrical works for indoor and outdoor lighting and fans, rain water drainage, sanitary, plumbing, monorail/ EOT crane etc. complete as per direction of Engineer-in-charge. The GA, structure, electrical, sanitary, P&ID, SLD to be prepared by the contractor and submitted to department for approval for earth quake zone II.
-
-
-
... More
Pump House with suitable EOT arrangement with Girder
1488
24470
36411360
... More
Construction of Pump house of RCC framed structure as per approved standard GA, structure, electrical drawing, scope of work and technical specification complete work in all respect including electrical works for indoor and outdoor lighting and fans, rain water drainage, sanitary, plumbing, monorail/ EOT crane etc for Earth quake zone II and SBC equal to or more than 7 T/sqm.
Note: Standard drawings can be viewed on website https://pheddms.rajasthan.gov.in/private/public/dms_document.aspx.
-
-
-
... More
CPS-22 Vaniya Talai Type III ( 150.6 Sqm)
1
3361960
3361960
... More
CPS-23 SANGRAMPURA Type II ( 111.34 Sqm)
1
2765720
2765720
... More
CPS-21 KHODIYAN Type I ( 72.3 Sqm)
1
1956260
1956260
... More
CPS-20 BNEEMARI Type III ( 150.6 Sqm)
1
3361960
3361960
... More
CPS-24 HEENTA Type II ( 111.34 Sqm)
1
2765720
2765720
... More
CPS-25 KHERODA Type II ( 111.34 Sqm)
1
2765720
2765720
... More
CPS-26 BHATEWAR Type IV ( 212.9 Sqm)
1
5210970
5210970
... More
CPS-27 MANDESAR Type II ( 111.34 Sqm)
1
2765720
2765720
... More
CPS-28 RANCHORPURA Type II ( 111.34 Sqm)
1
2765720
2765720
... More
CPS - 30 NOORDA Type III ( 150.6 Sqm)
1
3361960
3361960
... More
CPS-31 BIKARNI Type II ( 111.34 Sqm)
1
2765720
2765720
... More
CPS-32 MOTI KHERI Type II ( 111.34 Sqm)
1
2765720
2765720
... More
CPS-33 BASANI KALAN Type II ( 111.34 Sqm)
1
2765720
2765720
... More
CPS-37 MOHI Type V ( 381.5 Sqm)
1
8806160
8806160
... More
CPS-39 KUNWARIYA Type III ( 150.6 Sqm)
1
3361960
3361960
... More
CPS-38 RAJAWAS Type III ( 150.6 Sqm)
1
3361960
3361960
... More
CPS-34 RAILMAGRA Type III ( 150.6 Sqm)
1
3361960
3361960
... More
CPS-35 KURAJ Type II ( 111.34 Sqm)
1
2765720
2765720
... More
CPS-36 SADRI Type IV ( 212.9 Sqm)
1
5210970
5210970
... More
CPS-40 TASOL Type IV ( 212.9 Sqm)
1
5210970
5210970
... More
CPS-41 KELWA Type IV ( 212.9 Sqm)
1
5210970
5210970
... More
CPS-43 PUTHOL Type IV ( 212.9 Sqm)
1
5210970
5210970
... More
CPS-44 NEAR TUKRAKHURD Type IV ( 212.9 Sqm)
1
5210970
5210970
... More
CPS-45 VEEDO KI BHAGAL Type II ( 111.34 Sqm)
1
2765720
2765720
... More
CPS-46 SARDARGARH Type V ( 381.5 Sqm)
1
8806160
8806160
... More
CPS-49 BHAWARON KA WADIYA Type II ( 111.34 Sqm)
1
2765720
2765720
... More
CPS-48 MURDA Type II ( 111.34 Sqm)
1
2765720
2765720
... More
CPS-47 BADA Type IV ( 212.9 Sqm)
1
5210970
5210970
... More
CPS-52 DHODIWAS Type IV ( 212.9 Sqm)
1
5210970
5210970
... More
CPS-53 KUKDA KHATI Type III ( 150.6 Sqm)
1
3361960
3361960
... More
CPS-50 BHIL WARI Type III ( 150.6 Sqm)
1
3361960
3361960
... More
CPS-51 NARUJI KA GUDA Type II ( 111.34 Sqm)
1
2765720
2765720
... More
IPS-11/CPS BANDA Type V ( 381.5 Sqm)
1
8806160
8806160
... More
CPS-42 KANAWARA Type I ( 72.3 Sqm)
1
1956260
1956260
... More
CPS-29 WANGRODA Type II ( 111.34 Sqm)
1
2765720
2765720
... More
Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 , 2 pole motor operating at synchronised speed of 3000 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.
-
-
-
... More
BDCL-11,13 Route, 9 LPS/55 m head/(1W+1S) of 11 KW
2
83148
166296
... More
BDCL-9,10,12 Route, 14 LPS/66 m head/(1W+1S) of 18.5 KW
2
143629
287258
... More
BDCL-28,29,30 Route, 13 LPS/77 m head/(1W+1S) of 18.5 KW
2
143629
287258
... More
BDCL-35 Route, 7 LPS/31 m head/(1W+1S) of 5.5 KW
2
55225
110450
... More
BDCL-36 Route, 7 LPS/41 m head/(1W+1S) of 7.5 KW
2
67514
135028
... More
BDCL-4 Route, 12 LPS/30 m head/(1W+1S) of 7.5 KW
2
67514
135028
... More
BDCL-6,7 Route, 10 LPS/40 m head/(1W+1S) of 9.3 KW
2
78860
157720
... More
VCL-22 Route, 4 LPS/30 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
MCL-17 Route, 2 LPS/175 m head/(1W+1S) of 7.5 KW
2
67514
135028
... More
MCL-30 Route, 5 LPS/80 m head/(1W+1S) of 9.3 KW
2
78860
157720
... More
MCL-16,18,19 Route, 13 LPS/50 m head/(1W+1S) of 15 KW
2
108825
217650
... More
MCL-36,37 NCL-38 Route, 8 LPS/60 m head/(1W+1S) of 9.3 KW
2
78860
157720
... More
RACL-39,40 Route, 3 LPS/33 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
RACL-29 Route, 6 LPS/51 m head/(1W+1S) of 7.5 KW
2
67514
135028
... More
CPS-21C Route, 18 LPS/40 m head/(1W+1S) of 15 KW
2
108825
217650
... More
RACL-37 Route, 5 LPS/12 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
RACL-37,38 Route, 11 LPS/40 m head/(1W+1S) of 9.3 KW
2
78860
157720
... More
RACL-43,50,52 Route, 8 LPS/45 m head/(1W+1S) of 7.5 KW
2
67514
135028
... More
RACL-34 Route, 6 LPS/28 m head/(1W+1S) of 3.7 KW
2
43760
87520
... More
RACL-33,34,35 Route, 9 LPS/68 m head/(1W+1S) of 15 KW
2
108825
217650
... More
RACL-34A Route, 3 LPS/45 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
RMCL-33,34,39 Route, 12 LPS/45 m head/(1W+1S) of 11 KW
2
83148
166296
... More
RMCL-35 Route, 12 LPS/30 m head/(1W+1S) of 7.5 KW
2
67514
135028
... More
RMCL-27,28,32,38 Route, 14 LPS/55 m head/(1W+1S) of 15 KW
2
108825
217650
... More
RMCL-21,22,23,24 Route, 14 LPS/52 m head/(1W+1S) of 15 KW
2
108825
217650
... More
RMCL-15,19 Route, 6 LPS/42 m head/(1W+1S) of 5.5 KW
2
55225
110450
... More
RMCL-20,25,26,37,38 Route, 10 LPS/55 m head/(1W+1S) of 11 KW
2
83148
166296
... More
RMCL-16,18 Route, 4 LPS/51 m head/(1W+1S) of 3.7 KW
2
43760
87520
... More
RACL-22 Route, 6 LPS/10 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
RACL-24 Route, 2 LPS/10 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
RACL-6,21,23,47 Route, 21 LPS/45 m head/(1W+1S) of 18.5 KW
2
143629
287258
... More
RACL-13,25,26 Route, 19 LPS/45 m head/(1W+1S) of 18.5 KW
2
143629
287258
... More
RACL-5 Route, 10 LPS/55 m head/(1W+1S) of 11 KW
2
83148
166296
... More
RACL-1,2 ACL-16,42 Route, 12 LPS/70 m head/(1W+1S) of 18.5 KW
2
143629
287258
... More
RACL-5A Route, 12 LPS/20 m head/(1W+1S) of 5.5 KW
2
55225
110450
... More
RACL-11 Route, 4 LPS/30 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
RACL-12,13,45,CWR NEAR TUKRAKHURD Route, 30 LPS/21 m head/(1W+1S) of 15 KW
2
108825
217650
... More
RACL-10 Route, 13 LPS/71 m head/(1W+1S) of 18.5 KW
2
143629
287258
... More
CPS-23D Route, 10 LPS/98 m head/(1W+1S) of 18.5 KW
2
143629
287258
... More
RACL-19A Route, 4 LPS/73 m head/(1W+1S) of 7.5 KW
2
67514
135028
... More
RACL-19 Route, 3 LPS/43 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
RACL-18 20 Route, 12 LPS/62 m head/(1W+1S) of 15 KW
2
108825
217650
... More
RACL-16,17,18 Route, 8 LPS/60 m head/(1W+1S) of 9.3 KW
2
78860
157720
... More
RACL-43 Route, 3 LPS/25 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
KGCL-13,15 Route, 7 LPS/70 m head/(1W+1S) of 9.3 KW
2
78860
157720
... More
ACL-6,7,9,20 Route, 11 LPS/76 m head/(1W+1S) of 18.5 KW
2
143629
287258
... More
CPS-24A Route, 20 LPS/42 m head/(1W+1S) of 18.5 KW
2
143629
287258
... More
ACL-30,31,32 Route, 7 LPS/50 m head/(1W+1S) of 7.5 KW
2
67514
135028
... More
CPS-24B Route, 7 LPS/53 m head/(1W+1S) of 7.5 KW
2
67514
135028
... More
ACL-27,28 Route, 4 LPS/45 m head/(1W+1S) of 3.7 KW
2
43760
87520
... More
ACL-4,5 Route, 5 LPS/62 m head/(1W+1S) of 7.5 KW
2
67514
135028
... More
ACL-36 Route, 1 LPS/20 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
ACL-35,37 Route, 6 LPS/41 m head/(1W+1S) of 5.5 KW
2
55225
110450
... More
ACL-29 Route, 2 LPS/25 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
ACL-33,38 Route, 5 LPS/44 m head/(1W+1S) of 5.5 KW
2
55225
110450
... More
ACL-34 Route, 2 LPS/20 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
ACL-26 Route, 3 LPS/42 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
KGCL-05 Route, 5 LPS/42 m head/(1W+1S) of 3.7 KW
2
43760
87520
... More
CPS-53 Route, 9 LPS/52 m head/(1W+1S) of 9.3 KW
2
78860
157720
... More
KGCL-11,12 Route, 9 LPS/81 m head/(1W+1S) of 15 KW
2
108825
217650
... More
KGCL-04 Route, 2 LPS/25 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
KGCL-07 Route, 2 LPS/51 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
KGCL-1,2,3 Route, 6 LPS/57 m head/(1W+1S) of 7.5 KW
2
67514
135028
... More
ACL-41 Route, 2 LPS/25 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
ACL-10,11 Route, 3 LPS/75 m head/(1W+1S) of 5.5 KW
2
55225
110450
... More
ACL-13 Route, 3 LPS/35 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
ACL-8,12 Route, 6 LPS/125 m head/(1W+1S) of 15 KW
2
108825
217650
... More
MCL-4,42 Route, 9 LPS/40 m head/(1W+1S) of 7.5 KW
2
67514
135028
... More
MCL-1,2,3 Route, 3 LPS/61 m head/(1W+1S) of 3.7 KW
2
43760
87520
... More
RMCL-09 Route, 8 LPS/35 m head/(1W+1S) of 7.5 KW
2
67514
135028
... More
ACL-08 Route, 5 LPS/50 m head/(1W+1S) of 5.5 KW
2
55225
110450
... More
ACL-06,15,17 Route, 10 LPS/67 m head/(1W+1S) of 15 KW
2
108825
217650
... More
ACL-19,21 Route, 7 LPS/65 m head/(1W+1S) of 9.3 KW
2
78860
157720
... More
ACL-22,23,24,25,39,43 Route, 10 LPS/42 m head/(1W+1S) of 9.3 KW
2
78860
157720
... More
MCL-11 Route, 4 LPS/30 m head/(1W+1S) of 2.2 KW
2
34070
68140
... More
Providing and fixing at site with necessary packing, Horizontal Centrifugal Split Casting pumps with 4 pole induction motor operating at synchronised speed of speed 1500 RPM as per IS 12615: 2011 or amended up to date , CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts, Cement concrete foundation etc. complete with all respect as per the specification and scope of work and direction of Engineer in Charge of following range of duty conditions.
Note: Duty condition of required pump shall also be mentioned in BoQ.
-
-
-
... More
IPS-07 CPS DHARTA Route, 250 LPS/41 m head/(4W+2S) of 160 KW
6
1556866
9341196
... More
CPS-20,21,22 BHINDER TOWN Route, 115 LPS/60 m head/(1W+1S) of 110 KW
2
990485
1980970
... More
CPS-24,25,26,27 IPS-3 Route, 148 LPS/78 m head/(6W+3S) of 160 KW
9
1556866
14011794
... More
BDCL-14,22,23,24 Route, 20 LPS/75 m head/(1W+1S) of 30 KW
2
417667
835334
... More
BDCL-17,19,21 Route, 21 LPS/65 m head/(1W+1S) of 30 KW
2
417667
835334
... More
BDCL-31,33,34 Route, 20 LPS/67 m head/(1W+1S) of 30 KW
2
417667
835334
... More
BDCL-25,26,27 Route, 22 LPS/67 m head/(1W+1S) of 30 KW
2
417667
835334
... More
VCL-9,10,11,12 Route, 23 LPS/56 m head/(1W+1S) of 30 KW
2
327309
654618
... More
CPS-27 Route, 32 LPS/40 m head/(1W+1S) of 30 KW
2
285634
571268
... More
VCL-13,14,18,28 Route, 20 LPS/78 m head/(1W+1S) of 30 KW
2
417667
835334
... More
BDCL-5,8 VCL-16,17,19,20 Route, 30 LPS/72 m head/(1W+1S) of 45 KW
2
417667
835334
... More
VCL-23,24,25,26 Route, 28 LPS/75 m head/(1W+1S) of 45 KW
2
417667
835334
... More
VCL-5,6,7,8 Route, 27 LPS/66 m head/(1W+1S) of 37 KW
2
417667
835334
... More
MCL-12,13,14 Route, 25 LPS/50 m head/(1W+1S) of 30 KW
2
285634
571268
... More
MCL-26,28,41CPS-31 Route, 27 LPS/75 m head/(1W+1S) of 45 KW
2
417668
835336
... More
MCL-15,22,24,25,CPS-32 Route, 57 LPS/62 m head/(1W+1S) of 75 KW
2
672571
1345142
... More
CPS-21 B Route, 23 LPS/75 m head/(1W+1S) of 37 KW
2
417666
835332
... More
RACL-29,30,31,32 Route, 22 LPS/66 m head/(1W+1S) of 30 KW
2
417667
835334
... More
RMCL-10,11,12,13,14 Route, 22 LPS/60 m head/(1W+1S) of 30 KW
2
327309
654618
... More
RMCL-39,40 CPS-35 Route, 36 LPS/45 m head/(1W+1S) of 30 KW
2
327309
654618
... More
MCL-5,6,7,8,9 Route, 34 LPS/62 m head/(1W+1S) of 45 KW
2
492515
985030
... More
CPS-29,30 Route, 110 LPS/75 m head/(1W+1S) of 125 KW
2
1159705
2319410
... More
CPS-33 IPS-8 Route, 146 LPS/65 m head/(4W+2S) of 160 KW
6
1556866
9341196
... More
RMCL-8,5,4,29,30 Route, 22 LPS/75 m head/(1W+1S) of 37 KW
2
417667
835334
... More
Supply erection testing and commissioning of pumps & motors of approved duty conditions as perscope of work and specifications given in the tender document.
-
-
-
... More
CPS-40,41,43 Route, 54 LPS/158 m head/(2W+1S) of 160 KW
480
8100
3888000
... More
CPS-46 IPS-11, AMET TOWN Route, 64 LPS/136 m head/(2W+1S) of 125 KW
375
8100
3037500
... More
BDCL-16,17,35 CWR SANGRAMPURA Route, 34 LPS/112 m head/(1W+1S) of 75 KW
150
8100
1215000
... More
BDCL-1,2,3 Route, 17 LPS/67 m head/(1W+1S) of 22 KW
44
8100
356400
... More
VCL-1,2,3,4 Route, 18 LPS/75 m head/(1W+1S) of 30 KW
60
8100
486000
... More
MCL-20,21 Route, 19 LPS/80 m head/(1W+1S) of 30 KW
60
8100
486000
... More
MCL-10,40 NCL-38 Route, 22 LPS/105 m head/(1W+1S) of 45 KW
90
8100
729000
... More
RACL-3,4,7,8 Route, 14 LPS/140 m head/(1W+1S) of 37 KW
74
8100
599400
... More
ACL-1,2,3,44 Route, 15 LPS/85 m head/(1W+1S) of 30 KW
60
8100
486000
... More
KGCL-10,9,8 Route, 16 LPS/116 m head/(1W+1S) of 37 KW
74
8100
599400
... More
ACL-414,40, CPS-51 Route, 16 LPS/101 m head/(1W+1S) of 30 KW
60
8100
486000
... More
RMCL-1,2,3,6,7,17,39 Route, 32 LPS/105 m head/(1W+1S) of 75 KW
150
8100
1215000
... More
CPS-50,52 Route, 41 LPS/135 m head/(1W+1S) of 90 KW
180
8100
1458000
... More
RACL-09 Route, 7 LPS/170 m head/(1W+1S) of 22 KW
44
8100
356400
... More
MCL-23,27,31,32,33,34 Route, 40 LPS/100 m head/(1W+1S) of 75 KW
150
8100
1215000
... More
cps-34,36,37 IPS-10 Route, 241 LPS/100 m head/(2W+1S) of 325 KW
975
8100
7897500
... More
Supplying, erecting, testing & commissioning of Electrically Operated Travelling Crane (EOT) .Main girder & End Carriage fabricated from Rolled Steel Section, Gear Box for all motion, Electro Magnetic Friction Disc Type Brakes, all safety limit switches , LT wheels EN 9, Double Flanged 4No, with Sq. Cage motor of adequate rating (KW), duly painted mechanical cleaning and one coat of primer and two coat of synthetic paint and as per the direction of the Engineer.
-
-
-
... More
2 MT Capacity (Span 7 M and Lift 6 M)
34
482700
16411800
... More
5 MT Capacity (Span 7 M and Lift 6 M)
5
689700
3448500
... More
Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from HDPE/uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PP mechanical Integrated saddle with inbuilt flow control valve made out of SS316 designed for 5 LPM discharge at 0.5 bar pressure , not exceeding the flow of 7 LPM at 2 bar and a compression elbow, moulded in single piece/ fusion welded (Complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including GM Full-way Valve (IS:778 Mark) or wheel valve and specials with 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using PPR-C pipe with standard PPR fittings/ GI pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level.
-
-
-
... More
For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.
72430
1780
128925400
... More
P& F Bib cock (IS : 781 mark), superior quality of approved make , brss 400 gm, 15 mm nominal bore.
72430
311
22525730
... More
Road cutting for house hold service connection in minimum trench width whereever road crossing is required. Road cutting of cement concrete,WBM, Black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CC M-30 grade as per specification and direction of Engineer in charge.
144860
200
28972000
... More
Add extra over item no 1.21 & 1.22 for providing 20 mm PE 80 PN 16 as per ISO 4427 MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.
253505
44
11154220
... More
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil.
4275.2325
178
760991.385
... More
Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement M20 Grade nominal mix (with graded stone aggregate 20 mm nominal size)
For Vertical Post
940.766924390361
4934
4641744.004942042
... More
Providing and laying in position specified grade of reinforcement cement concrete all RCC Structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 (1 Cement : 3 Coarse Sand) and making good the joints excluding the cost of centering shuttering and reinforcement
M20 Grade nominal mix (with graded stone aggregate 20 mm nominal size)
Platform
942.360993699197
4934
4649609.142911838
... More
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
4845.6
157
760759.2000000001
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code)
76547.0294434565
77
5894121.267146151
... More
Providing,installation, testing and commisioning of vacuum Feed Gas Chlorinator with all assessories and making connection with existing pipeline required including supply & instalation of trunnion roller support, auxillary container valve, fluxible copper connector, manifold valve, tonner manifold pipes, chlorine Pressure gauge, Isolation valve, gas filter, pressure reducing valve, chlorine gas pipe with fittings, diffuser, lifting beam, load indicator, 25 NB PP diaphragm Valve on injector inlet & outlet, 32 OD uPVC pipe for chlorine solution, 25 NB GI pipe for pump suction & delivery, 25 NB GM gate valve on pump suction & delivery, 25 NB GM 'Y' type stainer on pump suction, 25 NB GM Check valve on pump delivery, pressure gauge with Isolated valve on pump delivery and chlorine booster pump with motor of required capacity complete in all respect as per specification and the direction of the Engineer.
-
-
-
... More
3 Kg/hr capacity
39
534800
20857200
... More
Supply of Chlorine Tonner as per specifications with rollers complete 3 in all respect as per the direction of Engineer.
92
139900
12870800
... More
Construction of Chlorine Shed (5 m x 4 m x 4 m)
39
567115
22117485
... More
Construction of Chlorinator Room (5 m x 4 m x 5.5 m)
39
468848
18285072
... More
Construction of Tonner Room (4 m x 3 m x 3.5 m)
39
570816
22261824
... More
Construction of Quenching Tank
39
44816
1747825.17
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.
(External work).
25 mm
780
282
219960
... More
Cleaning grass and removal of rubbish up to a distance of 50 mtr. out side the periphey of the area cleared
600
2
1200
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 Mtr. in width as well as 10 Sqm on plan including disposal of excavated earth upto 50 Mtr. and lift upto 1.5 Mtr. disposed soil to be levelled and neatly dressed : All Kind of spoil
26120
35
914200
... More
Supply of dry manure including loading unloading transportation & stacking at site :
-
-
-
... More
Goat dungmanure.
130.6
1200
156720
... More
Supply of different varities of tree/ shrubs/ climbers according to height and age of the plant at site including loading/ unloading & transportation etc. complete :
-
-
-
... More
Different varities of Climber 900 mm to 1500 mm
783.6
96
75225.6
... More
Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonne roller, or stone or steel rammers and rolling every 3rd and top- most layer with power roller of minimum 8-10 tonne capacity and dressing up in embankment for roads, flood banks marginal banks and guide banks or filling up ground depressions, lead up to 50 Mtr. and lift up to 1.5 Mtr.:
All kinds of soil
-
-
-
... More
upto 1.5 mtrs
36713.9734558818
272
9986200.77999985
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
26096.757556
175
4566932.5723
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
2252.096
178
400873.088
... More
Excavation work by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains not exceeding 1.5 mtr. In width or 10 cum of plan including dressing of siees and ramming of bottoms , lfit up to 1.5 mtr. Including taking out the excavated soil surplus excavated soil as directed with in a lead of 50 mtr. including stacking of useful material if available ordinary rock
450
268
120600
... More
Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion)
4012.5
47
188587.5
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like with pumping set of following H.P. including P.O.L./Power consumption etc. complete.
-
-
-
... More
Hire charges of Pumpset of capacity 4000 litres/hour
124.4988
1200
149398.56
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
-
-
-
... More
M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
54.0684
3731
201729.2004
... More
Providing and fixing up to floor five level pre cast cement concrete string or lacing courses, copings, bed plates, anchor blocks, windows sills, shelves, louvers steps, staircases, etc. including carriage, hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surface, including all T & P, curing etc. complete:
M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
117.54
6987
821251.9800000001
... More
Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate All work up to plinth level 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregated 40mm nominal size)
152
3302
501904
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
-
-
-
... More
M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
802.951534
3847
3088954.551298
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
11025
4320
47628000
... More
Random rubble stone masonry for foundation and plinth in cement sand mortar above 30 cm thick wall in: cement sand mortar 1:6 (1 cement : 6 sand)
350
2838
993300
... More
Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification .
-
-
-
... More
75mm thick.
684.32
546
373638.72000000003
... More
Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement M20 Grade nominal mix (with graded stone aggregate 20mm nominal size)
18110.800908
4934
89358691.68007201
... More
Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.
22428.657474
64
1435434.078336
... More
Centering and shuttering with plywood or steel sheets including structting, propping bracing both ways and removal of formwork for foundation footing, strap beam, raft, bases of coliumns etc. up to plinth level
7790.39428
157
1223091.9019600002
... More
Honey comb brick work half brick thick with bricks of class designation 75 up to third storey in.
Cement mortar 1:6 ( 1 cement : 6 coarse sand )
420
342
143640
... More
Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 6 (1 cement : 6 coarse sand)
360
4645
1672200
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.
M20 grade Nominal Mix / Design Mix
856.676
5609
4805095.684
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.
M20 grade Nominal Mix / Design Mix
693.2052
5185
3594268.962
... More
Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three level
Cold twisted deformed bars (IS:1786)
716128.869456
77
55141922.948112
... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :
-
-
-
... More
Columns, pillars, posts and struts etc.
24185.297664
375
9069486.624
... More
Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formworks for foundation in basement rafts, footings, straps beams, bases of columns etc. up to plinth level.,Suspended floors, roofs, landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blockes sills, chhajjas, lintel, beams etc.
5242.96
340
1782606.4
... More
Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 (A) up to 15 cm thick
6.22
9621
59842.619999999995
... More
Supplying and fixing in walls machine cut and polished stone shelves, tands, in 1:3 with machine cut edges
-
-
-
... More
Kota stone minimum 30mm thick.
2640
609
1607760
... More
Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks
-
-
-
... More
Cement mortar 1 : 6 (1 cement : 6 coarse sand)
554.4
4263
2363407.1999999997
... More
Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks
-
-
-
... More
Cement mortar 1 : 6 (1 cement : 6 coarse sand)
1094.4
3265
3573216.0000000005
... More
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1 : 6 (1 cement : 6 coarse sand)
1941.578
4990
9688474.22
... More
Half brick masonry in foundation & plinth using bricks of designation 75
-
-
-
... More
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
201.84
497
100314.48
... More
Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75
-
-
-
... More
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
1842.84
553
1019090.5199999999
... More
Brick work in partition in super structure upto five storey 7cm. thick (brick on edges) using bricks of class designation 75 in :
-
-
-
... More
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
2278.368
377
858944.736
... More
Supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm. long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design. (Clear openable area to be measured for payment).
273.6
2074
567446.4
... More
Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry : Size 100 x 75mm.
297
271
80487
... More
Providing and fixing factory made P.V.C. door frame manufactured by M/s Rajshri of the size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm PVC foam sheet mitred at two corners and jointed with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame shall be fixed to the wall using 65/100 mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4 nos of screw to be provided for each vertical member and minimum 2 nos for horizontal member etc. complete as per manufactures specification and direction of Engineer in Charge.
55.99
277
15509.230000000001
... More
30mm thick factory made solid both side Pre laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15x15mm top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture’s specification & drawing.(For W.C.and bathroom door shutter).
20.79
3347
69584.12999999999
... More
Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :
-
-
-
... More
(A) Window side hung/Ventilators top or centre hung(Openable)
535.92
3135
1680109.2
... More
Partly fixed and partly openable [ fixed area not to exceed 33%]
303.737417475734
3090
938548.620000018
... More
Supplying and fixing fixed wire gauge of 14 meshx24 gauge to the metalframe of rolled section bymetal beading 20x3mm with suitable screw at not exceeding 150mm distance
673.188
617
415356.996
... More
Providing and fixing square bars or other flat welded to window, ventilator etc.
1849.8
65
120237
... More
Brick on edge flooring with bricks of class designation 75 including cement slurry & pointing in CM (1 : 3) etc. complete laid on 20 mm thick bed of : Cement Sand Mortar 1 : 6
3666
487
1785342
... More
Providing and fixing 50mm thick cement concrete flooring with Metallic concrete hardener topping, under layer of 38mm thick cement concrete 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm thick nominal size) and top layer of 12mm thick metallic concrete hardener consisting of mix 1:2 (1 cement : 2 stone aggregate, 6mm nominal size) by volume & mixed with metallic hardening compound of approved quality @ 2Kg./Sqm including cement slurry, rounding off edges etc. but excluding the cost of nosing of step etc. complete.
2280
453
1032840
... More
Cement plaster in skirting and/dado 18 mm thick with cement mortar 1:3 (1 cement : 3 course sand) finished with a floating coat of neat cement including rounding of junctions with floor .
182.4
284
51801.6
... More
Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :
-
-
-
... More
20mm thick .
17528.4
202
3540736.8000000003
... More
Colour washing of all shades to give an even shade including all scaffolding :
-
-
-
... More
New work (two or more coats) with a base coat of white washing with lime.
10875.6
14
152258.4
... More
Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished seamless type tubes.
21725
109
2368025
... More
Grading roof water proofing treatment with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) with water proof compound as per manufature specification
72
4483
322776
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
480
111
53280
... More
Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification :
78
367
28626
... More
Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height In flates, tees, angles & Channals
500
81
40500
... More
Providing and fixing in position collapsible steel shutters with vertical M.S. , Channels 20x10x2mm and bracket with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm . with top flat of 50 x 10 mm and bottom flat of 40 x 6 with 40mm dia steel pulleys/ ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer ( To be measured and paid as per outer dimension).
12
5174
62088
... More
Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandha as per design complete in all respect ( wooden or PVC hand railing to be paid extra) with priming coat of red oxide.
360
81
29160
... More
Supply and fixing door, window, chowkhats and other frame including antitermite treatment MS flat old faste of size 250x40x3mm mixed with MS bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade (Klin seesoned and chemically treated Hollock wood Grade-1
2
41491
82982
... More
Providing and fixing external grade board solid core flush door shutter ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fitting complete as per annexure A 30 mm thick
-
-
-
... More
(A) Commercial Veneer both side
238.6
1841
439262.6
... More
B) Decorative teak veneer both side
32
2440
78080
... More
Add extra for RR stone masonary with hard stone in square or Rectangular pillars Up to 45cm length and all sides are free
40
173
6920
... More
Providing and fixing vertical blinds, made out of non woven polyster fabric 85 to 90 mm wide of approved shade & design with power coated aluminium channel minimum 1"x1" system including cording set etc. complete as per specification & directon of engineer in charge
42
1623
68166
... More
Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).
Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)
284
326
92584
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as per the architecyutal drawing and the direction of engineer-in-charge (cowst of aluminum snap beading shall be paid in basic item) with glass panes of 4.0 mm thick (weight not less than 10 kg /sqm) as per IS 2835
72
791
56952
... More
Providing and fixing expanded grill made of anodised aluminium as per design and drawing having members section of 7.5 mm x 6.0 mm and opening of size 102 mm x 99 mm to aluminum window/vent with required screws. Y and H aluminum sec ( as per drawing) at the ends and middle joints respectively complete in all respect as per direction of Engineer-in-charge.
Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)
62
1775
110050
... More
Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete.
18
908
16344
... More
P&F bright finished mortic lock of approved made Godrej or equilent with pair of CP handles for doors with necessary screws etc. complete (Best make of approved quality) as per direction of Engineer in charge
20
629
12580
... More
P&F Ist quality vitrified procelain Polished tiles on floor, skirting and steps etc. if different sizes (thickness to be specified by manufacture) with water absortion less than 0.08% and conforming to IS:15622 of approved make in all colour and shade , laid with 20mm thick CM 1:4 including grouting the joints with white cement and matcing pigment etc. complete size 600x600mm
1814
911
1652554
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With brass cover plate
4
1976
7904
... More
Random rubble stone kharanja under floor
144
932
134208
... More
Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finbished
-
-
-
... More
(A) 20mm thick
514
190
97660
... More
(B) 12mm thick
248
160
39680
... More
6mm thick cement plaster on ceiling of mix 1:3( 1 cement : 3 fine sand)
496
139
68944
... More
Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete
248
84
20832
... More
Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to code IS : 15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).
204
674
137496
... More
Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4).
50
748
37400
... More
Applying priming coat with ready mix pink oir gray primer of approved brand and manufacture on wlld work hard and soft wood
400
29
11600
... More
Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding.
3326.4
53
176299.2
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect.
3326.4
80
266112
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work
1421.008
69
98049.552
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding : New work(Two or more coats) over and incluiding scrapping and priming coat with cement primer
11245.6
75
843420
... More
Finishing wall with water proffing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding New work (two or more coat applied @ 3.84 kg/10 sqm)
442
53
23426
... More
Making of drip course(Tapka) in cement sand mortar 1:6 width up to 40mm and 10mm thick as per approved design
350
11
3850
... More
Earth work in excavation /by mechanical means(hydraulic excavator)/manual means over areas (exceeding 30 cm in depth 1.5 mtr. In width as well as 10 sum on plan) including disposal of excavated earth lead up to 50 mtr. And lift up to 1.5 mtr. Disposed earth to be levelled and neatly dressed :ordinary rock
360
251
90360
... More
P&F curtain rods of 1.25mm thick chromim platged brass plate, with two chromim plated brass brackets fixed with C.P. brass screws and wooden plugs etc. whereover necessary complete 20mm
40
266
10640
... More
P&F indian type white glazed vitreous china ist quality WC orissa pan (IS 2556 Mark) with 100mm vitreous china P or S trap including cutting and making good the wall and floor size 580x440 mm
6
3080
18480
... More
P&F WVC wash basin (Ist quality IS:2556 Mark) of approved make with C.I.Brackets duly painted 1 No. 15mm CP Pillar cock (IS 8934 Mark) and 32mm CP brass waste coupling of approved make, 25mm GI waste pipe complete including cutting and making good the wall size 580mmx450mm
10
2745
27450
... More
P&F Towel Rall or Ring of approved quality/make CP brass Town pail with brackets 600x20mm
10
337
3370
... More
P&F PVC storage Tank (IS :12701 marked including the BIS license No.) of approved make with cover 25mm dia 1 M long GI over flow pipe and 25 cm. long wash cut pipe with plug & socket, including making connection etc. complete of approved design
-
-
-
... More
(A) 1000 Litre capacity
6
7841
47046
... More
(B) 500 Litre capacity
10
3920
39200
... More
P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. Size 600 x 450 mm x 4 mm thick
10
575
5750
... More
P&F GI Pipe (internal work) with GI fitting (IS 1239 Mark) and MS clamps including cutting and making good the walls and floors Exposed on walls
Size 600 x 450 mm x 4 mm thick
-
-
-
... More
(A) 15mm dia nominal bore 'B' Class
240
230
55200
... More
(B) 25mm dia nominal bore 'B' Class
160
360
57600
... More
P&F GI pipe (External works) with GI fitting (IS 1239 mark) including trenching & refilling earth etc.
-
-
-
... More
(A) 15mm dia nominal bore 'B' Class
70
190
13300
... More
(B) 25mm dia nominal bore 'B' Class
50
278
13900
... More
Making connection of GI distribution branch with GI main including all fitting up to 25mm dia
2
265
530
... More
P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:
-
-
-
... More
(A) CP Brass Bib cock 15mm nominal bore
10
590
5900
... More
(B) CP Brass Bib cock 15mm nominal bore long body 15mm nominal bore weight not less than 690 gram
8
1008
8064
... More
P&F stop cock (IS 8931 mark) superior quality of approved make Brass 400 gram 15mm nominal bore
40
319
12760
... More
P&F Ball cock (IS 1703 Mark) with Rod and PVC Ball complete Brass wt. Not less than 300 gm,15mm.
40
314
12560
... More
P&F full way valve (IS 778 Mark) or wheel valve of approved make
-
-
-
... More
(A) Gun metal 15mm nominal bore
10
227
2270
... More
(B) Gun metal 25mm nominal bore
10
529
5290
... More
P&F sand cast floor Trap (Nahni) of (IS 1729 mark) of approved quality/make with socket down or hinged grating includinbg good the floor Size 100x100mm
10
832
8320
... More
P&F Flush Cock/Flush Valve (IS 9758 mark) for wC of approved quality make
-
-
-
... More
(A) Brass /Gun metal Half-turn weight 1 kg of approved quality /make 25mm nominal bore
2
551
1102
... More
Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.
Depth up to 0.5 m
2
5489
10978
... More
Construction of soakage well in all type of soil with 300mm thick dry masonary top and bottom 300mm course in CM 1:6 , 80mm thick stone slab, jointing of slab in CM 1:3 Ralthal, kharanja 40mm thick M-15 grade C.C.flooring earth work complete as per approved drawing including disposal of earth with in a lead of 50 mtr. Size 240 cm dia outside and 240 cm depth
2
16100
32200
... More
Construction of septic tank in all types of soil with 40 cm thick masonary in CM 1:6, 15 cm thick C.C.bed of 1:5:10, M-15 grade C.C.flooring & over stone slab covering, 80mm thick slab jointing of slab in CM 1:3 Ralthal, kharanja, 50mm thick stone partition wall, 20mm thick plaster in CM 1:6 finished with neat floating cement 4 Nosa. CI foot rests of approved design two Nos. 450mm dia each Ferro cement cover with frame. earth work etc. with in a lead of 50 mtr.
-
-
-
... More
(A) size 230x110x150 cm (for 20 users)
2
38499
76998
... More
Providing and laying cement concrete 1:5:10 (Stone aggregate 40mm nominal size) up to haunches of S.W.pipes including 150mm thick bed concrete (Width W= Dia of pipe in CM+30 cm) concrete width to be reduced from width W at Centre of pipe to '0' at top of pipe (Excluding cost of pipe) 100mm diameter SW pipe
160
217
34720
... More
Construction of chamber in all type of soil with 300mm thick masonary in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6 finished with floating neat cement 50mm thick M-15 grade C.C.flooring, Ferro work etc. complete as per design including disposal of surplus earth with in a lead of 50 mtr.
-
-
-
... More
(A) Inside size 300x300 mm depth up to 0.5 Cement cover with frame.
16
1049
16784
... More
P&F rigid pvc pipe (IS 4985 mark) class II (4 kg/cm2 ) approved quality,make including jointing the pipe with solvent cement rubber ring and lubricant
-
-
-
... More
(A) 110mm dia
280
282
78960
... More
P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:
110mm dia
-
-
-
... More
(A) Door bend (Top side)
30
154
4620
... More
(B) Bend 87.50
30
161
4830
... More
(C) Vent Cowel
8
56
448
... More
P&F 15mm dia connection pipe of approved quality /make
-
-
-
... More
(A) PVc Pipe with CP Brass nuts up to length 450mm
30
101
3030
... More
Supply and fixing GI Union ISI marked in GI Pipe line as required complete in all respect of size
-
-
-
... More
(A) 15mm dia nominal bore
44
101
4444
... More
(B) 25mm dia nominal bore
36
164
5904
... More
P&F Grating of approved quality/make stainless steel sheet size 125mm dia
4
62
248
... More
P&F Ist quality WVC Urinal (IS 2556 mark) with 25mm dia GI waste pipe dome waste coupling connected iron brackets or screws etc. complete Flat Back (small) size 456x355x265 mm
4
1832
7328
... More
P&F Marble Urinal partition slab both sides polished of approved design cut form marble size 900x600mm Makrana 'Albeta' Marble having light streaks
2
862
1724
... More
P&F European type white glazed vitreous china Ist quality Double syphonic WC (IS 2556 mark) with P orf S trap including cutting sna making good the wall and floor
4
5198
20792
... More
P & F Low level Flushing Cistern of 10 litres capacith (IS : 2556 mark), of approve make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS : 1703 mark) complete including cutting and making good the wall: PVC bend of make commander champion PVC with PVC bend as per IS 7231
4
1645
6580
... More
P &F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. WVC Lab sink (IS: 2556 mark) size 530 x 430 x 180mm
2
2754
5508
... More
P&F jet spray for water closet with CP copper tube flange of approved make
6
381
2286
... More
Wiring of light point/fan point/exhaust fam point bell point with 1.5 sq mm nominal size SR PVC insulated unsheathed 1.1 kv grade fixible copper conductor and 1.5 sq mm nominal size FR PVC isulate copper earth conductor (IS : 694) of approved make double lock/ISI marked single lock pvc casing copping & its assessories 18 SWG MS box wikth earth terminal screwless cage connector for neutral looping in switch vboaed & falce ceiling point 6 A switch 6 A socket ,3.0 mm thick phenolic laminated sheet zinc plated/brass screws, cup washers making connection testing etc. as required
-
-
-
... More
(A) Short point (up to 3.0 mtr.)
42
252
10584
... More
(B) Midium point ( up to 6 mtr.)
36
476
17136
... More
(C) Long point (up to 10 mtr.)
28
666
18648
... More
Wiring of 3/5 pin 6 amp. Light plug point as per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) on surface ISI marked ( IS:14927 P - II ) UPVC casing capping & it's accessories like coupler, inner, outer, elbow, square box, tee, end cap etc., Hot
Dipped Galvanized Modular box of 18 SWG with earth terminal/ surface moulded UPVC Modular box, 3/5 pin 6 A modular switch, 6
A modular socket, Modular face plate with grid plate, screws, , all as per pre approved by Engineer in charge, making connections,
testing etc. complete as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring
accessories refer Chapter E - 04, E - 05 & E -07. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
-
-
-
... More
On Board
100
253
25300
... More
Providing and fixing of non modular power plug point accessories as per PWD specification for electrical Works with 18 SWG G I box of size 175 x 100 x 60 mm with earthing terminal/connector on recessed/surface with suitable size phenolic laminated sheet (IS :2036 - 1995) cover including cost of 16 amp. Switch (IS :3854) and 3/6 pin 16 amp. socket outlet [ as per detailed in respective item inBSR], making connection , testing , etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with
this BSR .
36
205
7380
... More
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A or C ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4, , in existing surface or recessed PVC/ MS conduit/casing capping
including all as per pre approved by Engineer in charge,making connections, etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional
technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
(A) 2x1.5 sq.mm
542
25
13550
... More
(B) 2x2.5 Sqmm +1x1.5sqmm
600
51
30600
... More
(C) 2x4.0 sqmm+1x2.5 sqmm
442
73
32266
... More
Providing & Fixing of ISI marked (IS:2268-1994) ding dong/musical chime bell as per PWD specification for electrical Works, including making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of
products/ work , refer Annexure "A" attached with this BSR
20
109
2180
... More
Supplying and installation of 32mm dia GI pipe 'B' class Medium class G.I. Pipe confirming to IS : 1239 P - 1 ( 2004 ) with accessories like bend, socket etc. required for installation of hand pump complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
32
247
7904
... More
S&Laying following size earth wire/strip in horizontal or vertical run in ground/surface /recess including riveting,soldering,saddles, making connection etc.as required 8 sWG copper wire
140
83
11620
... More
Providing & Fixing of surface/recessed type 10 mm thick wood board duly antitermite treated, varnished and fixed by using gutties/
PVC fasteners of following size as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
-
-
-
... More
(A) 250mmx300mm
90
57
5130
... More
Plate Earthing as per PWD specification for electrical Works as perIS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia.G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. For additional technical parameters of products/work , refer Annexure "A" attached with this BSR
6
8943
53658
... More
Providing & Fixing of Fluorscent tube rod in existing fixtures as required complete in all respect. All as per pre approved by Engineer
in charge. For additional technical parameters of products/ work ,refer Annexure "A" attached with this BSR
-
-
-
... More
(A)36/40 Watts
124
51
6324
... More
Providing & Fixing of IK07 IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum LM6/ ADC12 material with heat dissipation fins on housing with UV stabilized PC/Toughened
Glass cover (UV stablzation report submitted for UV cover ) and secondary lens on each LED & should be SMD type . The System level Luminaire efficacy >=120 lm/ wt with High Power LEDs is to be used and potted driver must be potted & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety ,Input Frequency
50Hz±3% Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . drivercurrent <1000mA shown in LM79 report. The luminaire shall be BIScertified and T.C. certified. Life Expectancy Equal or more than50000 burning hrs with Minimum 70% lumen maintened ,colorRendering Index >70 and CCT 5700K +355K. Surge protection shall
be min ≥ 4 KV internal and min 10 KV external. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with
liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
-
-
-
... More
1x30 Watt E181302
8
2465
19720
... More
Providing & Fixing of Fluorscent tube rod in existing fixtures as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
-
-
-
... More
(A) 36/40 Watts
124
51
6324
... More
(B) Triphosphor coated 28 Watts
42
65
2730
... More
Supply & drawing Wiring for sub mains as per PWD specification for electrical Works with ISI marked (IS:694) , 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. Support wire duly clipped including all as per pre approved by Engineer in charge, making connections, as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of products/
work , refer Annexure "A" attached with this BSR
6.0 Sq.mm
28
56
1568
... More
P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work ,
refer Annexure "A" attached with this BSR
50
94
4700
... More
P & F 3.0 mm thick Poly propelene plastic polishedconcealed fan box, squre of size (106x106) mm dia, depth 50 mm , 10 mm dia rod of SS with platinium coated with 55 mm length extended on each side . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
50
99
4950
... More
Providing & Fixing of 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C tripping characteristic as per type of load and site requirement) 4KV impulse withstand voltage, as per PWD specification for electrical Works with ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , IP 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 A rating and 10,000 upto 63 A, 5000 for 80 A rating including making connections, testing etc. as required. . OEM shall have submit NABL / CPRI / ERDA accrediated lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSRsingle pole MCB 6 A to 32 A rating
70
146
10220
... More
Providing & Fixing of 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA ( D curve tripping characteristic as per site requirement) 4KV impulse withstand voltage, as per PWD specification for electrical
Works with ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , IP 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 A rating and 10,000 upto 63 A, 5000 for 80 A rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSRE060211
4
694
2776
... More
Providing & Fixing of IK09 recessed/surface mounting heavy duty horizontal type sheet steel not less then 1.2 mm thick Distribution board as per PWD specification for electrical Works ISI marked conforming to IS-13032 & IS-8623 / conforming to IEC 61439-3.Phosphatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link ,connecting wire of suitable rating and din bar,masking sheet,including making internal DB terminations with copper lugs and with detachable gland plate, including making connections, testing etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated
lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/
work , refer Annexure "A" attached with this 12 way
4
1138
4552
... More
S&F following sizes of ISI marked ( IS:14927 P - II ) UPVC casing capping as per PWD specification for electrical Works along with all accessories like coupler, inner, outer, elbow, square box, tee, end cap etc. on surface with screws, expansion fasteners , All as per pre approved by Engineer in charge, making connections, testing etc. complete as required. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR 25mmx12mm
140
26
3640
... More
Wiring of light point/ fan point/ exhaust fan point/ call bell point as per PWD specification for electrical Works with ISI marked 1.5 sq.mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit & it's all accessories( J.B. , Bends etc.) round tiles,18 SWG G.I. box with earth terminal, 6 A switch , 3 pin ceiling rose/ Lamp holder / 3 point Connector, 3.0 mm thick ISI marked phenolic laminated sheet (IS : 2036 - 1995), Al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by Engineer in charge, making connections, testing etc. complete as required. For specification of copper Conductor,
Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 . For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
-
-
-
... More
(A) Short point (up to 3.0 mtr.)
22
190
4180
... More
(B) Midium point ( up to 6 mtr.)
66
320
21120
... More
(C) Long point (up to 10.0 mtr.) E020103
28
431
12068
... More
S&F following sizes (dia.) of ISI marked ( IS:9537 P - II ) rigid steel conduit of apropriate thickness related to its dia as per PWD specification for electrical Works along with accessories in recessed using saddles, clamps, fasteners, pvc bushes, check nuts, screwas etc. as required including cutting the wall and making good the same as required all as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer
Annexure "A" attached with this BSR 25mm E020402
150
102
15300
... More
Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) as per PWD specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , minimum width of 1 module switch toggle( PUSH PART ) should not less then 20mm, including all as per pre approved by Engineer in charge,making connections, testing etc. as required. All
as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
-
-
-
... More
(A) 6A one way switch
104
52
5408
... More
(B) 6 A two way switch
6
75
450
... More
(C) 16 A 6 pin shuttered socket
6
133
798
... More
(D) 5 step fan regulator 100 watt 2 Module
110
319
35090
... More
P&F following size mounting grid plates with cover plates
-
-
-
... More
(A) 4 Module
12
67
804
... More
(B) 12 Modules
8
157
1256
... More
Providing & Fixing of extra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
30
136
4080
... More
P&F of heavy duty capactor start 900/1400 RPM single phase ISI marked exhaust fan IS :2312 marked in existing opening including making connection testing etc. as required 300mm sweep (900/1400 RPM)
18
2316
41688
... More
Providing & Fixing of ISO certified company made TP&N 415 V AC-23A front handle operated switch disconnector fuse unit, cubical type, with metallic enclosure, as per PWD specification for electrical Works conforming to IS/lEC 60947-3 : 1999 with HBC fuses including making connections with lugs, testing etc as required. Appropriate type test certificate / OEM test report shall be submitted . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
100/125 A rating
2
5096
10192
... More
SITC of IP 40 3 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings as per PWD specification for electrical Works, conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage 800 V, provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections with lugs & spreaders, etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A"attached with this BSR
E090314
4
9535
38140
... More
Providing & Fixing of ISO certified company made bus barchamber housed in sheet metal box as per PWDspecification for electrical Works Confirming to IEC60439/IS-8623 & IEC-60529/IS-2147 made out from 1.6mm thick powder coated CRCA sheet,degree of protectionIP-31, front openable bus bar made out of aluminium orwrought aluminium alloy suitable for 100 amp. Capacity ,bus bar fixed on porcelain/DMC insulators at approvedspacing including making connections etc. as required.
Appropriate type test certificate / OEM test report shall besubmitted . All as per pre approved by Engineer in charge.For additional technical parameters of products/ work ,refer Annexure "A" attached with this BSR
450 mm long , 4 strip
4
1528
6112
... More
Wiring of 3/5 pin 6 amp. Light plug point as per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade
(IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) vergin material PVC
conduit & it's all accessories( J.B. , Bends etc.) , round tiles, 18 SWG Hot Dipped Galvanized Modular Box with earth terminal, 6 A modular switch, 3/ 5 pin 6 A modular socket, Modular face plate with grid plate, screws etc,all as per pre approved by Engineer in
charge, making connections, testing etc. complete as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07.
For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
Medium point (up to 6 mtr.)
114
444
50616
... More
S&F following sizes (dia.) of ISI marked ( IS:9537 P - II ) rigid steel conduit of apropriate thickness related to its dia as per PWD specification for electrical Works along with accessories in recessedusing saddles, clamps, fasteners, pvc bushes, check nuts, screwas
etc. as required including cutting the wall and making good the same as required all as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
40 mm
570
144
82080
... More
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.
-
-
-
... More
2 x 6.0 sq. mm. + 1 x 2.5 sq. mm.
1900
103
195700
... More
P & F following size hot dip galvanized M.S. box with
earthing terminal in recess/ surface suitable for modular accessories as required.
10-12 Module
38
197
7486
... More
P&F TP&N 415 V AC-23A front handle operated switch disconnector fuse unit, cubical type, without metallic enclosure, conforming to IS:13947 P-III in existing panel (With HBC fuses) including making connections with lugs, testing etc as required.
63 A rating
38
3167
120346
... More
Supply and fixing of 1.6 mm thick MS 11 kV Danger plates as per IS :2551-1982 & specification of Discom on the existing poles complete in all respectas per PWD / DISCOM specification. All as per pre
approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
76
45
3420
... More
Providing & Fixing of ISI marked (IS :3854) 6 amp. flush type non modular switch as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material, minimum width of switch toggle ( PUSH PART ) should not less then 16 mm, brass terminal & captive screws including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with
this BSR
152
19
2888
... More
PP & F ISI marked (IS :1293) 3 pin 6 amp. flush type socket including cutting hole in tile and making connection testing etc. as required..
38
23
874
... More
P & F of IP20 LED Recessed/ Surface Mounted Round/ sqaure Dimmable Downlight with die Cast aluminum housing & Heat sink for heat dissipation, high purity reflector with external driver having efficiency >85% and in compliance to IEC standards. (supplied togetherwith luminaire) Power consumption of < 15W/ 20W with1100/1400 lumens system lumen efficeancy of 70 lm / Watt output downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE compliance.
LED Downlight Recessed Mounting 18/20W
38
586
22268
... More
P & F of IP65 IK10 rated LED bulk head type ligh fixture made from CRCA sheet steel housing suitable for mounting LED tube system (integral driver), Powen consumption of 10-15W , 500-600 lumens system lumen efficiecy 70 lm/ watt output suitable for1x100 W GLS/ 9W CFL bulk head fixtures, life time of 50000 burning hours with 70% initial lumen maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be in compliance with CE & KEMA standards.
LED BULK head luminaire 9/10 W
38
1434
54492
... More
Provision for Electrical and Sanitary Fittings at consumer rederessal centres
22
98959
2177101.08
... More
Supply and erection of M S swaged tubular pole conforming to IS: 2713-1980 (part I to II) with galvanised base plate in position including excavation of the pit and filling the same with C.C. of M-20 grade (1:1.5:3) from base plate to 50 cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer
dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals, cable entry, GI cable sleeve complete as required. After eraction pole shall be
painted with two coat of red oxide primer and two quote of enamel paint of silver colour as per the direction of Engineer incharge.The pole shall be fabricated by using ISI mark tube for structural purpose of following height & designation. ( See Table P - 02 for specs. ) complete in all respect. All as per pre approved by
Engineer in charge. For additional technical parameters of products/work , refer Annexure "A" attached with this BSR 7.5 mt high
78.36
6992
547893.12
... More
Providing & Fixing of IK07 IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum LM6/ ADC12 material with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover (UV stablzation report submitted for UV cover ) andsecondary lens on each LED & should be SMD type . The System level Luminaire efficacy >=120 lm/ wt with High Power LEDs is to be used and potted driver must be potted & has a unique BIS R
number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety ,Input Frequency 50Hz±3% Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <1000mA shown in LM79 report. The luminaire shall be BIS certified and T.C. certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened ,color Rendering Index >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.
OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with
liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional
technical parameters of products/ work , refer Annexure "A"attached with this BSR
LED Street Light fixture 45 Watt
78.36
4405
345175.8
... More
Providing and laying XLPE/PVC insulated & PVC sheathed Unarmoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavationj of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and Iind class bricks covering 4C x 2.5 sq.mm
783.6
183
143398.80000000002
... More
Providing and fixing cow catcher made of R.S. joist angles channels MS rounds including cutting welding and fabrication with priming coat of red oxide (as per design).
653
74
48322
... More
Construction of Soakage well in all types of soil 300mm thick dry stone masonry, top and bottom 300 mm course in CM 1 : 6, 80 mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring earthwork complete as per approved drawing including disposal of earth within a lead of 50 Mtr.
-
-
-
... More
Size 300 cm dia outside & 300 cm depth
2.612
24135
63040.62
... More
Construction of Septic Tank in all types of soil with 40 Cm. thick masonry in CM 1 : 6, 15 Cm. thick C.C. bed of 1 : 5 : 10, M-15 grade C.C. flooring & over stone slab covering, 80 mm thick slab, jointing of slab in CM 1 : 3 Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1 : 6 finished with neat floating cement, 4 Nos C.I. foot rests of approved design, two No. 450 mm dia 25 Kg. of each C.I. cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 Mtr.
-
-
-
... More
Size 400 x140x150 cm.(for 50 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways including shuttering complete in all respect.
2.612
59860
156354.32
... More
Providing Laying & Jointing glazed S.W. pipes grade "A" (IS : 651 Marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1 excavation & refilling of earth in all types of soil upto 1.2 m. depth, S.W. fittings, including testing of joints etc. complete.
-
-
-
... More
150mm dia
391.8
406
159070.80000000002
... More
Providing and Laying C.C. 1 : 5 : 10 (stone aggregate 40 mm nominal size) all around S.W. pipe including 15 cm. thick bed concrete as per Rajasthan PWD specifications : (Width W = Diameter of pipe in Cm + 40 Cm.). (Excluding cost of pipe )
-
-
-
... More
150mm dia
261.2
550
143660
... More
Providing and fixing G.I. pipes (External Work) with G.I. fittings (IS : 1239 Mark) including trenching & refilling earth etc.
-
-
-
... More
25mm dia nominal bore
261.2
228
59553.6
... More
Providing and fixing Ball Cock (IS : 1703 Mark) with Rod & P.V.C. Ball complete.
-
-
-
... More
Brass wt.Not less than 1000 gm 40mm.:
15.672
728
11409.216
... More
Laying of lawns including ploughing leveling breaking of clods manuring and removal of stones etc. (cost of manure or extra good earth to be paid separately )maintenance of lawn foe 30 days or more till the grass forms a thick lawns free from weeds and fit for moving in the duration of planting if lawn die some where the contractor will replant it at his own cost
-
-
-
... More
in rows 5 cm apart in either direction
1044.8
6600
6895680
... More
SITC of star rated Aluminium wound distribution Transformer of following rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & as per BEE star - 1 & BIS approved as per IS 2026- 1977 & losses as defined as per 2014 (Fourth Revision) Level-1 . including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, temperature rise in winding/oil 35-40 degree C upto 200 KVA & 40-45 degree C for above 200 KVA, ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect . The Transformer shall be subjected to routine factory tests (as per IS:2026 and IS:1180) including testing from CTL of discom before charging of transformer & complete installaion must be certified from Electrical Inspectorate office as per Indian Electricity rule, (CTL testing charges and Electrical Inspection charges shall be reimbursed by the department to the contractor). All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
100KVA
20
261516
5230320
... More
160KVA
34
326895
11114430
... More
200KVA
6
411888
2471328
... More
250 KVA with Off -LTC (+5% to - 10% @ 2.5%)
6
438040
2628240
... More
315 KVA with Off -LTC (+5% to - 10% @ 2.5%)
4
635040
2540160
... More
Supply, installation, testing & Commissioning of Copper wound distribution Transformer of following rating and % Impedance, 11/0.433KV Delta-Star Connected, Vector Group Dyn 11, ONAN Cooled losses as per IS 1180 part I 2014 (Fourth Revision) Level-1, with boltless core design including standard accessories like conservator with prismatic oil level gauge , silica gel breather, Bucholz relay, pressed steel radiator fins, Radiator Valve(above 800 Kva) Suitable size HT cable box, LT cable box with Busbar connection for outgoing cables, Off -LTC (+/- 2.5%, +/- 5% to - 7.5% ), temperature rise of 40 degree C in oil / 45 degree C in winding , drain valve, Air release device, Dial type Oil & Winding Temperature gauge with alarm & trip contacts, first filling of transformer oil as per IS :335-1953 , Epoxy primer and PU based paint as Top coat, Unidirectional rollers for rating upto 800 kva & bi- directionalabove 800 Kva rollers with locking arrangement etc. as required. The Transformer shall be subjected to routine factory tests (as per IS:2026 and IS:1180) including Temperature rise test in OEM's own lab shall be witnessed by Department engineer Physically. Transformer shall be tested from CTL of discom before charging of transformer & complete installaion must be certified from Electrical Inspectorate office as per Indian Electricity rule, (CTL testing charges and Electrical Inspection charges shall be reimbursed by the department to the contractor)Following tests shall be carried out on each transformer at site by OEM enginer in presence of department authorised representative:- a) Ratio test on each tapping.b) Resistance of windings at principal and all tapings.c) Insulation resistance of the winding between HV to earth / HV to LV / LV to earth.d) Vector group test.e) Magnetic Balance test. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .
-
-
-
... More
1000 KVA with % Impedance 5.0
4
2647833
10591332
... More
1250 KVA with % Impedance 5.0
2
2982987
5965974
... More
1600 KVA with % Impedance 6.25
2
3240357
6480714
... More
Supply & Installation of D.P. Structure With AIR BREAK SWITCH having following specifications A, B, C, D, E. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . A) Double pole structure on 2 no ISMB ( I beam ) of size 150 x 75 mm, 10 mtr length using 7 no MS channel each of size 100 mm x 50 mm x 2500 mm complete in all respect with nuts, springs washers, clamps as required. B) Off load type gang operated 3-pole vertical flute type switch suitable for 11KV ; 400A ,3-ø, central post rotating double break isolator complete with MS hardware , copper moving & fixed contact ,assembly of 9 nos pin insulator ,GI pipe of suitable length for operation. C) 3nos Vertical / Horizontal mounted 11kv horn gap fuse set /drop out 11kv barrel fuses mounted on 6no pin insulators D) 3 piece non linear resistor type. lighting arrestor of approved make suitable for 3 wire, 11kv Overhead line with rated voltage of 9kv rms & nominal discharge current rating of 5 ka & complete with galvanized clamping arrangement GI bolts, nuts, washer etc as required. E) 3 no 11kv ACSR conductors mounted on pin type insularors as required. 6.GENERAL:The go shall be operated by hand operated liver properly earthed with provision for locking mounted at 3’
78
104718
8168004
... More
SITC of HT metering cubical panel as approved By DISCOMs fabricated out of 18 SWG CRCA sheet steel in two compartment & MS angle of size 60mmX 6mm having provision for Following: (i)Provision for fixing Trivector / Import - Export Meter (To be supplied by DISCOMs) (ii)Provision for fixing of combined CT PT Set with Copper strip for Connection (To be supplied by DISCOMs), (iii)Test terminal Block, (iv) 6mm thick Bakelite sheet on all sides, (V) 3/6 corex 1.5 / 2.5 Sq.mm copper cable for interconnections, etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
39
32852
1281228
... More
SITC of 11kV 630 Amps 21KA for 3 Sec. SF6 insulated, outdoor duty (IP54) , Extensible / Non extensible type Ring main unit (RMU) manually operated in combination of VCB modules and Load Break switch consisting of Copper busbar in SF6 insulated 304 (Non-Ferrite Non-Magnetic Grade) stainless steel enclosure of thickness 2.5mm with manometer. The HV switchgear and control gear should be confirming to IEC-62271-100, IEC-62271-200-2003 & IEC-60694-1996. The RMU should be internal arc tested for 21KA for 1Second with IAC-AFL classification for gas tank. Vacum Interrupter of VCB should be RMU Manufacturer’s own make. Each feeder of RMU should have voltage presence indicator. . and compring of followings:- 1 no. microprocessor based Self powered numerical relay with over Current/ earth fault & short circuit protection with each VCB feeder. - 3 Nos. Protection CT shall be of Burden 2.5VA, ratio 50/1A, Class of Accuracy class 5P10 for O/C and E/F protection for each VCB.- 1 No. Manometer for each tank,- 1 nos. Fault Passage indicator,-Right angle boots for all the feeder Modules All the type test certificates as per IEC from Third party NABL / CPRI / ERDA accrediated lab to be submitted. (Cost of RCC Foundation / Steel Structure to be paid Extra) All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
-
-
-
... More
Extensible 2 way RMU with 1 no. VCB & 1 No. Load Break Switch
78
392000
30576000
... More
Providing & Laying XLPE insulated three core Armoured Aluminium cable for working voltage 11 K.V.(E) confirming IS :7098 P - 2 with H4- Grade electrolytic aluminium conductor confirming to IS: 8130 class-2 of purity >99.6 %, Insulation Screening: Extruded Semiconducting Compound followed by helically wrapped Copper Tape, round / flat strip armouring of cables , Inner / outer sheath PVC type ST-2 confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
3 core 95.0 Sq.mm
1950
1319
2572050
... More
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/ joint kit suitable for 11 KV / 33 KV (Earthed) cable with required components, prepration of cable ends. Type test report should be as per IS13573:2011 which covered all sequence for table 2 for termination kit and table 3 for streight through joint inclusive thermal & dynamic short circuit test, humidity test, soil fog test. Cross linking shall be done out side factory with E- beam/ peroxide technology. Extrusion process shall be in house OEM within same vicinity. including testing etc. as required of following sizes. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
3 core 50/70/95 Sq.mm
234
4932
1154088
... More
3 core 50/70/95 Sq.mm
156
7217
1125852
... More
Plate Earthling as per IS:3043 with copper Earth plate of size 600mm x 600 mm x 3.0mm by embodying 3 to 4 mtr. Below the ground level with 25 mm dia. G.I. ‘B’ class watering Pipe including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
390
8534
3328260
... More
Pipe Ear thing as per IS: 3043 with perforated 3.0 Mtr. Long, 40 mm dia. ‘B’ class G.I. Pipe including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300 mm and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance as required.
234
1961
458874
... More
S & Laying following size ‘B’ Class G.I. Pipe confirming to IS: 1239 P-1 (1990) with accessories for laying earth conductor/ strip/ cable in ground/ surface/ recess as required.
-
-
-
... More
50 mm dia.
1872
426
797472
... More
Supply & Laying following size earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
50mm x 6mm copper strip
3900
4223
16469700
... More
25mm x 6mm G.I. ( Hot Dipped ) Strip
3900
201
783900
... More
32mm x6mm G.I. ( Hot Dipped ) Strip
3900
251
978900
... More
50mm x 6mm G.I. ( Hot Dipped ) Strip
3900
416
1622400
... More
Supply, Fabricating & installing following sizes of perforated Hot dipped Galvanized iron cable tray ( Galvanized thickness not less then 50 microns) with perforation not more then 17.5% in convenient section including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with GI suspenders including GI bolts & nuts , fastners, supports etc. as required.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
100mm x 50mm x 1.6mm
2200
567
1247400
... More
150mm x 50mm x 1.6mm
2200
692
1522400
... More
300mm x 50mm x 1.6mm
2200
1079
2373800
... More
Supplying and drawing PVC insulated & sheathed solid/ stranded copper conductor multi core control cable ISI marked (IS:1554) of 1.1 kV grade of approved make as per chapter E11,in existing surface or recessed conduit/ casing capping including making connections etc. as required.
-
-
-
... More
4 core, 1.5 sq. mm. armoured
21400
87
1861800
... More
8 core, 1.5 sq. mm. armoured
21400
136
2910400
... More
8 core, 2.5 sq. mm. armoured
11700
193
2258100
... More
Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
-
-
-
... More
400 SQMM, 3.5 CORE
4500
2774
12483000
... More
300 SQMM, 3.5 CORE
3500
2165
7577500
... More
120 SQMM, 3.5 CORE
3500
969
3391500
... More
70 SQMM, 3.5 CORE
2000
625
1250000
... More
240 SQMM, 3 CORE
2100
1776
3729600
... More
185 SQMM, 3 CORE
500
1450
725000
... More
150 SQMM, 3 CORE
200
1123
224600
... More
95 SQMM, 3 CORE
800
748
598400
... More
50 SQMM, 3 CORE
1000
468
468000
... More
35 SQMM, 3 CORE
4000
326
1304000
... More
25 SQMM, 3 CORE
2200
250
550000
... More
16 SQMM, 3 CORE
4800
198
950400
... More
10 SQMM, 3 CORE
8000
183
1464000
... More
4.0 SQMM, 3 CORE
32000
126
4032000
... More
SITC of IP-42 and general construction confirming to IS:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and Other parameters required as per point (a) ,(b), (c),(d, (e), (f), (g), (h) as below:- (a)Thickness of CRCA sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. Removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided (b)complete panel shall undergo a process of degreasing, Water rinsing, Activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then Powder coated with approved shade of minimum 70 microns on both side of panel. The panel having PE foam/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire. [c) nterconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 Sq.mm, Earth wire with 2.5 Sq.mm and CT with 2.5 sq.mm flexible copper wire only. All joints / interconnections of copper bus bar shall be dully tinned . Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves . Earth and Neutral bus bar shall be half of the size of phase bus bar. ( Cost of Bus bar / Flexible wire for Interconnection between Main connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging. (f)Floor mounted panel shall be mounted on Base frame of ISMC channel size 100 x 50 x 5 mm ( to be paid Extra ) (g) Tests: The insulation resistance (with 1000 V Megger) and High voltage Power frequency test (by applying a voltage of 2.5KV for one minute) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. The insulation resistance shall not be less than three megaohm. CT Secondary current injection test shall also be carried out. (h) only outer surface area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator only (CPRI Test certificates to be submitted)All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
busbar and Switchgear is to be Paid Extra ) (d)Wiring between components within switchgear and Incoming / outgoing cable shall be done through the terminal block only. Direct connection shall not be permitted. Each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. For tap-offs, adjacent terminals with shorting strips shall be used. 10% Spare terminal blocks shall be provided. Wire identification on marking strip shall correspond to the designation of the wiring diagrams. All wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram. (e)All wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, Wiring between terminals of various devices shall be ‘point to point’ (no wire splitting or tee
1035
6124
6338340
... More
Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2) / Copper (IEC 60028) bus bar by means of SMC / DMC type insulator with standard short circuit withstand capacity , high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
Electrolytic grade Aluminium bus bar 6010 grade
3363.75
556
1870245
... More
Providing & Fixing of IS: 13875 & IEC :61326 confirming LED Digital type (up to 500) V range Volt meter / Direct- Ammeter / CT oertated ammeter/ Frequency meter / KWH meter / Multi Function Meter / Power analyzer of class 1 accuracy as per IS : 1248 of size 96mm x 96 mm including making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
Three phase with universal Auxiliary supply + AMP + HZ + PF + KW + KVA + KVAR + KVARH + KWH + DUAL ENERGY+ ENERGY+THD-I, THD-V & RUN HRS + MD with RS485
78
6429
501462
... More
Three phase AMP+HZ+PF+KW+KVA+KVAR+T.ENERGY+THD-I, THD-V & RUN HRS
242
3333
806586
... More
Providing & Fixing of BIS approved Current Transformer as per PWD specification for electrical Works ,ISI marked as per IS 2705-1992/ conforming to IEC 60044-1, with secondary terminal of CT shall be brought out suitable to a terminal block which shall be easier accessible for testing and terminal connection , with all necessary support in existing panel including connection etc. as required Current transformer Ring Type Tape Wound/Resin Cast Wound as per IS 16227 with, Accuracy Cl, CT ratio and burden as specified. ISF<=5, Cu cross section of secondary wire 1.5sqmm (minimum), including all necessary support in existing panel including connection etc. as required . All as per pre approved by Engineer in-charge.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
C T Class 1, Ratio 200/5 to 300/5, Burden 10 VA
243
1345
326835
... More
C T Class 1, Ratio 400/5 to 1200/5, Burden 15 VA
72
1613
116136
... More
C T Class 1, Ratio 1600/5 to 3000/5, Burden 15 VA
36
2651
95436
... More
Providing & Fixing of Cam operated rotary (Auto/manual) switches on existing panel with 2 way and off position using high grade engineering material to international standards with cam assembly insulation of glass filled polyamide with high tracking index. For reliable and stable electrical and mechanical endurance double butt contacts with silver bi-metal on copper should provided contact assembly is of operating temp range -25 degree C to 55 degree C, frequency upto 10 KHz. switch life under std. op. conditions shall be mechanically minimum 50000 operations @300 cycles/ hour and electrically 10,000 operations at 100% rated duty for 100 cycles/ hour including making connection etc. as required . All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
10 AMP
366
372
136152
... More
16AMP
242
439
106238
... More
Providing & Fixing of 110/220 V, unibody LED Indicating lamp IEC 60947 with integral circuit, IP 65 above panel & IP 20 terminal block, Approx. body dia for panel not less then 20 mm, length min. 50mm, front LED cover dia min. 29 mm, contact material phospher bronze for Led, PCB contacts shall be of brass (tin plated), impulse dielectric tested for 2.5 KV, Rated insulation resistance shall be 100 M ohm at 500VDC including connection etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
Red/yellow/Blue
234
174
40716
... More
Red/Gree/ white Colour
234
267
62478
... More
Red/Gree/ white Colour
726
267
193842
... More
Red/Green
732
267
195444
... More
Providing & Fixing of flush head push button actuators IEC 60947 with integral circuit, IP 65 above panel & IP 20 terminal block, Approx. body dia for panel not less then 20 mm, length min. 50mm, front LED cover dia min. 29 mm, contact material phospher bronze for Led, PCB contacts shall be of brass (tin plated), impulse dielectric tested for 2.5 KV, including connection etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
-
-
-
... More
Non luminous type
484
168
81312
... More
Providing & Fixing of Electrical insulating rubber matts as per PWD specification for electrical Works, ISI marked confirming to IS: 15652 / 2006 with one side anti skid abberation marks and pasting the mat with synthetic rubber adhesive as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
11 KV, Class B 2.5 mm thick with proof voltage 22 KV AC (rms) and Break Down Voltage 45 KV AC (rms)
440
2094
921360
... More
SITC of 3 /4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% ICU. U imp =8 KV, rated insulation voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in-charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
-
-
-
... More
250 Amp , 35 kA, adjustable O/L & adjustable S/C setting,
54
20287
1095498
... More
400 Amp , 35 kA, adjustable O/L & adjustable S/C setting,
12
24442
293304
... More
630 Amp , 35 kA, adjustable O/L & adjustable S/C setting,
4
35376
141504
... More
Extended Rotary Handle
70
2781
194670
... More
Mechanical Interlocking kit
35
7117
249095
... More
Auxiliary + Trip alarm contact
70
1675
117250
... More
Spreaders for 250A, 4 Pole MCCB
108
1580
170640
... More
Spreaders for 400A, 4 Pole MCCB
24
3179
76296
... More
Spreaders for 630A, 4 Pole MCCB
8
3513
28104
... More
SITC of Draw out type 3/4 pole door interlock Air Circuit Breaker (ACB) as conforming to IS/IEC 60947 P - 2 :2003 in existing LT panel suitable for LT installation 440 V, 50 Hz and having adjustable over load short-circuit, Instantaneous , earth fault (LSIG) with separate LED indication for each type of fault shall confirm to EMI/ EMC test , LCD/LED display, last 10 trip history, provision of ZSI, Communication, Power metering module, Thermal memory , trip free mechanisum , suitable for ambient 50 degree and utilization catagary B. In built electrical & mechanical anti pumping feature , 100% rated neutral . ACB shall have separate indication for service, test, isolation & maintenance position, Breaking capacity Icu = Ics = Icw ( 1 sec ) , U imp - 12 KV, break time not more then 25 ms. Provision for electrical & mechanical interlock between ACBs, Min.electrical operation 10000 upto 2000 A rating and 5,000 for 2500 A to 4000 A. including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in-charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
-
-
-
... More
1600 A Rating ,50 kA
6
261910
1571460
... More
2500 A Rating ,50 Ka
2
367957
735914
... More
Supply and fixing of following accessories for Air circuit breaker (ACB) compatible with MAin ACB OEM as per PWD specification for electrical Works, conforming to IS/IEC 60947 P - 2 :2003 including making connection etc complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
Shunt Trip Release
8
2853
22824
... More
Under voltage Release
8
4545
36360
... More
Microswitch for Indication
8
2482
19856
... More
Operation Counter
8
8354
66832
... More
Door Interlock
8
3384
27072
... More
Auxiliary Contact 4 NO + 4 NC
8
5642
45136
... More
Breaker Control Switch (TNC)
8
1322
10576
... More
Providing & Fixing of IP54 microprocessor based 3 CT’s for all 3 phase sensing compensation power factor correction relay Size 139mm x 139 mm, Operating Voltage 415/440 V , IEC / EN 61000-6-(2&4) having 3 CT sensing, sensitivity up to 50 milli amp secondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall have digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, communication interface with RS 485, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like KW, KVA, KVAR, RMS Value, step switching time 2 sec to 1800 sec. Lead & Lag parameters, metering facility and 3 no. Class- 0.5 Cast Resin CT ( refer CT specs in this chapter )for sensing the relay including making coonection with 1.5 Sq.mm copper wire etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
6 to 8 stage
30
15370
461100
... More
12 to 14 stage
9
20115
181035
... More
Providing & Fixing of self healing IP20 MPP type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1&2 OR IEC : 60831-1& 2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than 0.0025 at 50 Hz, Operating loss less than 0.30 Watt per KVAR. Min over current capacity 1.8 times rated current & peak inrush current min. 300 times of rated current, llife expectancy greater than 100000hrs (temp class - 25 D) in 440 V/480 V Capacitor and for 525 V should life expectancy minimum 1,65,000 hrs (temp class - 25 D) including making connections, testing etc. as required.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
Heavy duty Three phase 440 V, 50 Hz cylindrical type capacitor (Bank)
4020
383
1539660
... More
Providing & Fixing of 440 Volt 3 pole capacitor (AC 6 B ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current as per PWD specification for electrical Works, IS/IEC 60947-4-1 : 2000, insulation voltage 1000V, impulse withstand voltage 8 KV,Din rail mounting type including making connections, testing etc. as required. suitable for following capacity capacitor bank. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
up to 6 KVAR
250
1858
464500
... More
10 KVAR
51
2334
119034
... More
15 KVAR
12
3152
37824
... More
25 KVAR
21
3858
81018
... More
50 KVAR
32
11057
353824
... More
Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in-charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
-
-
-
... More
Triple pole MCB (With B/C curve trippingCharacteristics), 6 A to 32 A rating
313
933
292029
... More
50/63 A rating
30
1419
42570
... More
125A rating
23
6476
148948
... More
Four pole MCB (With B/C curve tripping Characteristics), 6 A to 32 A rating
156
1254
195624
... More
Double pole MCB(With B/C curve tripping Characteristics) , 6 A to 32 A rating
390
580
226200
... More
SITC of Soft Starters with panel supplied by manufacturer conforming to applicable standards with logic inputs & outputs, relay outputs and analogue outputs, plug in I/O connections, display of electrical parameters, state of load & operating time, RS 485 serial link for connections to Modbus.
-
-
-
... More
200KW
3
361240
1083720
... More
160KW
18
329747
5935446
... More
125KW
5
207482
1037410
... More
110KW
2
229712
459424
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%