Public Health Engineering Department Tender

(3.1.1) Notes

(3.1.1.1) The rate indicated below are excluding the cost of pipes, specials and valve required for inlet, outlet, washout, overflow and bypass arrangement.

(3.1.1.6) The rates are applicable for staging height of 18 M. These rates shall be increased or decreased for variation in the staging height as below

(3.1.1.7) For staging 20 Mtr add 5%

(3.1.1.8) For staging 22 Mtr add 12%

(3.1.1.9) For staging less than 18 Mtr decrease 2% per Mtr.

(3.1.1.11) Following rates are for seismic zone II. For zone III, these rates shall be increased by 5% and for zone IV, these rates shall be increased by 10%. Concerned Executive Engineer shall confirm the seismic zone for the scheme from seismic zones plan before estimation and adopt appropriate rates as per actual seismic zones.

(3.1.2) Rates for RCC OHSR, SBC 10T/sqm, seismic zone II and Staging 18 Meter.

(3.1.2.7) 150 KL capcity 2 Nos

(3.4) Providing and flxing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended upto date), as vertical pipes for RCC Reservoirs including specials required such as duckfoot bend, bend, tee etc. providing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all resepect upto and from valve chamber as per direction of EIC, Technical Specification and Scope of work.

(3.4.1) 100 mm

(3.4.3) 200 mm

(3.4.4) 250 mm

(RUIDP 19.20.2) Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846 amended upto date) PN 1.0 class of following dia complete (including jointing and jointing material) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. dia in mm

(19.20.2.2) 100 mm

(19.20.2.5) 200 mm

(19.20.2.6) 250 mm

(RUIDP 19.34.2.6) Providing, lowering, laying, aligning, fixing in position and jointing in pipe line, C.I. dual plate check valves as per API:594 and API:598 of PN 1.0 rating of following dia (including jointing a nd jointing material), including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer Category "B" (Makes / vendors other then Category "A" will be considered in category “B”).

(19.34.1.5) 200 mm

() RISING MAIN PIPELINE (BSR PHED JAIPUR 2019 , RUIDP 2017, PHED JALORE 2014)

(1.4) Providing,lowering,layimng and jointing in trenches,standard lengths HDPE ISI marked pipes as per IS:4984 :1995 (amended upto date ) with necessary jointing material like mechanical connectors ,i.e thread/insert joint/quick release coupler joint/compression fitting joint or flanged joint and specials jointing pipe by butt fusion/electro fusion welding method,including all taxes,transportation and freight charges,inspection charges,loading/unloading charges,stacking of pipes,including cost of labour and material ,specials(Tee,bend etc.)satisfactory hydraulic testing,disinfection etc.complete as per technical specifications and direction of Engineer-in-charge of following class and diameter.(excluding earth work) Note:- Providing and fixing of all requisite specials as per drawing ,design and layout are inclusive in RM measurement of item and shall not be paid.separately. Supply upto 110mm dia.in coil & above 110mm dia.straight length in 6 M.

(1.4.1.6) 200mm

(12.1.1) Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter for pipe line work. In All kinds of soil.

(RUIDP 19.20.2) Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846 amended upto date) PN 1.0 class of following dia complete (including jointing and jointing material) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. dia in mm

() 80 mm

() 100mm

() 150mm

() 200mm

(37146) Demolishing cement concrete including disposal of materail within 50 m lead

(12.9.1.1) 1:3:6 leaner mixture

(12.9.1.2) 1:2:4 Richer mixture

(37876) Dismantaling of bituminous road surface for laying of pipe line as per direction of Engineer-In-charge

(36934) Providing and laying in position cement concrete curing compaction etc.of specified grade excluding the cost of centering and shuttering all up to plinth level

(37664) 1:2:4 (1 cement:2 course sand:4 graded stone aggregate 20mm nominal size

(38029) 1:3:6 (1 cement:3 course sand:6 graded stone aggregate 20mm nominal size

(1.15) Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect.

(1.3) Providing ,lowering,laying and aligning fixing in position an djoointing at all level/depth S&S standard specials with rubber ring (EPDM) joints as per IS5382-1985 such as Tees,Bends,tapers, caps etc.within treaches in DI pipe line complete including all material ,labour ,commissing along witgh pipe line as per technicals specification and direction of Engineer-In-charges

() A/S Tee,Bend,Reducer (all end socketed)

(1.3.1.1) upto 300mm diameter

() PART 'B'

() DISTRIBUTION MAIN (BSR PHED JAIPUR 2019, PHED JALORE 2014

(1.4) Providing,lowering,layimng and jointing in trenches,standard lengths HDPE ISI marked pipes as per IS:4984 :1995 (amended upto date ) with necessary jointing material like mechanical connectors ,i.e thread/insert joint/quick release coupler joint/compression fitting joint or flanged joint and specials jointing pipe by butt fusion/electro fusion welding method,including all taxes,transportation and freight charges,inspection charges,loading/unloading charges,stacking of pipes,including cost of labour and material ,specials(Tee,bend etc.)satisfactory hydraulic testing,disinfection etc.complete as per technical specifications and direction of Engineer-in-charge of following class and diameter.(excluding earth work) Note:- Providing and fixing of all requisite specials as per drawing ,design and layout are inclusive in RM measurement of item and shall not be paid.separately. Supply upto 110mm dia.in coil & above 110mm dia.straight length in 6 M.

(1.4.1.1) 90mm

(1.4.1.2) 110mm

(1.4.1.5) 160mm

(12.1.1) Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter for pipe line work. In All kinds of soil.

(RUIDP 19.20.2) Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846 amended upto date) PN 1.0 class of following dia complete (including jointing and jointing material) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. dia in mm

() 80 mm

() 100mm

() 150mm

(37146) Demolishing cement concrete including disposal of materail within 50 m lead

(12.9.1.1) 1:3:6 leaner mixture

(12.9.1.2) 1:2:4 Richer mixture

(37876) Dismantaling of bituminous road surface for laying of pipe line as per direction of Engineer-In-charge

(36934) Providing and laying in position cement concrete curing compaction etc.of specified grade excluding the cost of centering and shuttering all up to plinth level

FHTC

(38029) 1:3:6 (1 cement:3 course sand:6 graded stone aggregate 20mm nominal size

(BSR 2020 01.23) Providing service connection as per technical specification and standard drawing as per relevant IS Code (amended up to date) from all kind of water mains up to consumer meter/premises (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil including demolishing of cement concrete,WBM, Black top etc. Of all thickness; cutting of CC road/jhiri by using a concrete cutter machine; depositing and refilling of pit &jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter ; providing & fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS clamp with saddle piece gunmetal ferrule 4.0 mm (ISI make) , gunmetal NRV (ISI make), valve (IS: 778) and specials with MDPE pipe PE 80 PN 12.5 as per ISO 4427, with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . In addition to the ferrule, an orifice of 4.0 mm dia should also be provided in the service line at the entry point of the consumer's property in such a way that it should be accessible for inspection to VWSC, PHED and any other authority which would like to inspect as and when required. The service line should be laid at least 45 CM below ground level, except in cases of concrete/bituminousroadswhen minimum depth shall be20cm. For detailed specifications of MDPE pipes please refer section "Technical Specifications" of bid document. General specifications of MDPE pipes shall be as under: • The raw material shall be virgin PE 80 Blue compound and comply with the requirements of ISO/Directive of testing material : 9080 with minimum required strength of 8 Kg/sq.cm. • The raw material shall be Food grade quality Pressure rating shall be 12.5 Bar. • The pipes shall bear ISO marking.

(1.23.1) Average length upto 05 mtr 20 mm dia MDPE pipe

(1.23.2) Extra length of 20 mm MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.

(4.1) Data entry of existing FHTCs in rural area under JJM on website ejalshakti.gov.in; work includes visiting the village for collecting basic data consumers like i.e. Aadhar no/ration card/voter ID/BPL card/ PAN card/driving licence/passport/Antyodaya card/mobile no. etc. and entering the details on the above website. The cost also includes computer and operator.