Public Health Engineering Department Tender

Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges,inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M. 200 mm dia PE80 PN 06

Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges,inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M. 140 mm dia PE80 PN06

Excavating trenches of required width as per size of pipes, including excavation for sockets and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil and then returning the soil as required in layers not exceeding 20 Cm in depth including consolidating each deposited layer by ramming and watering etc. and disposing of surplus excavated soil as directed within a lead of 50 Mtr.Hard soil (Clay soil)

Demolishing by power hammer for removal of pipeline leakage. Demolishing of CC road from 100mm to 350mm thick road by power hammer with generator set of 5KVA including all T & P, fuel, operator, trnsporting to pipeline leakage site in muncipal boundary complete in respect. complete job of CC road demolishing & claculating the demolishing area of road for payment.

Making road cut pit for leakage retification of pipe line including cutting of ro, stacking carefully excavated material as site and including repair of same road pit by using available material with extra required new one as per speicifaction of existing road as required and as directed by EIC complete for bitumen Road including seal coat.

Making road cut pit for leakage retification of pipe line including cutting of ro, stacking carefully excavated material as site and including repair of same road pit by using available material with extra required new one as per speicifaction of existing road as required and as directed by EIC complete for brick on edge, brick soiling road single layer.

Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet)

Making tee conection for newly laid pipeline in existing working pipe line of size pipe size 80 mm to 100 mm.

Making tee conection for newly laid pipeline in existing working pipe line of size pipe size 125 mm to 150 mm.

EXECUTIVE MEDIUM BACK REVOLVING OFFICE CHAIR Providing & Fixing of Executive medium back revolving chair having following specification : Seat/Back, Assembly: The seat/Back are made up of 12mm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra confort. Back Size :520mm (W) × 580mm (H) Seat Size :460mm (W) ×470nn (D) Overall Height : 1080mm Polyurethane Foam : The polyurethane foam is moulded with density = 45+2kg/m3 Upholstery : Fabrick/Leatherette Arm rests: The one-piece of armrest in "D" shape made up of Polypropylene sample and color to be approved by Engineer-in-charge

Computer Table(900x750mm) Providing and fixing of staff clerk room tablemade out of 18mm ply ISI BWP waterproof and acidproof and equalant make and 1mm thick mica at Top and inside, front having combination pattern the top thick 38mm and top edge teak wood biding decorative one sight box with drawer and shutter locking arrangement 1 Nos. key board tray or CPU arrangement with channel & self shutter complete melamine polish sample and color to be approved by Engineer-in-charge.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on Old Work

Finishing walls with water proofing cement paint of required shade including all scaffolding. : Old work (One or more coats)

P & F 1st quality Vitrified tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.size 500 mm X 500 mm

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).