Public Health Engineering Department Tender

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter.

All kinds of soil.

Oridinary Rock Qty

Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg. including all jointing material as per specification with safety cover.

Supply and fixing of CI Double Flanged Type Sluice Valve with required tail pleces as perAPI 594 & API 598 (revised upto date) & departmental Specifications: duly inspected & tested by the prevalling Inspeting agency of the Department as to be inspected and tested at Divisional Store. The rate includes cost of rubber gesket, nuts and bolts, excavation in all type of soils and dewatering for fixing of valves

Size 100 mm

Supply of CI dual plate type check valve and provided with metal to metal seating for raw water and with soft seating for clear water : duly inspected & tested by the prevalling Inspeting agency of the Department as to be inspected and tested at Divisional Store. The rate includes cost of rubber gesket, nuts and bolts, excavation in all type of soils and dewatering for fixing of valves

Size 100 mm

Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifitions and direction of Engineer-in-charge.

MS pipe specials upto 600mm dia ( with minimum 5mm thickness sheet)

Demolishing cement concrete including disposal of material within 50 mtr lead. 1:3:6 or richer mix

Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering All work up to plinth level.

M15 grade Nominal Mix ( with graded stone aggregate 20mm nominal size)

Supply & installation of three phase 5-satr rated submersible pumping motor pump sets made of Stainless Steel body as per IS:8034-1989 of approved make K.S.B./SHAKTI/KBL/ CROMPTION/ AROMA or equivalent only, making connection suitable for T.W. The job includes , installation of complete fitting & accessories with riser pipes, jointing of electrical cables & other connection making switch board electrical connection all labour for testing of submersible pump set and supply of water to water mains, complete in all respect including 2 year guarantee after date of commissioning.

V-6 above 5.5 KW upto 10.0 KW

Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventor, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter (supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 guage M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg's length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form.The size of CC plateform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply.

Suitable for upto 7.5 HP Motor Pump Set

Providing & lowering of G.I.pipes, flange pipe including rubber washer and nuts of 8 mm dia complete in all respect I.S.I make (B Class ) Make Zindal, TT Swastik, RTL, Garg Ispat only

50 mm dia

Supply & Fixing of ISi marked three core PVC flat submersible cable as per IS 694: 1990 or amended up to date and conductor as per class 5 of IS 8 130: 1980 includ ing making connection etc.

6.0 sq.mm 3 core

Providing and laying PVC insulated and PVC sheathed cables of 1.1 KV grade with aluminum conductor of IS 1554 category-II and approved make of including excavation of 30 cm x 75 cm side trench as per IS-1255 15 cm thick under layer of sand II class brick covering, refilling earth in the remaining portion making necessary connection including testing etc of required size & core (category-I) make as mentioned in specification.Make ICC,GLOSTER,NICCO, FINOLEX, UNITOP,BCH

16 Sqmm 4 core

Providing & Fixing GI Pipe (external works) ISI marked class "B" including all jointing materials like flanges tail pieces bends reducers etc. complete in all respect. Pipe shall be Make Zindal,TT Swastik,RTL,Garg Ispat only

50 mm dia