Public Health Engineering Department Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 4,84,300Document Cost
₹ 5,000Tender Fee
₹ 1,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_PHCJO_240317_20Bid Award Id
ViewTender No
NIT No. 142-161/2021-22 Region-II-JodhpurTender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://https://phedwater.rajasthan.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
(2.4.3) Add 15% extra on above item for drilling depth beyond 100 mtr, If depth
of Tube well is more than 100 mtr.
160
-
994.75
... More
(2.8) Testing verticality of tube well by plumbing system and yield test anddraw down test by pumping system as per IS : 2800 (Part - II) - 1979 asamended up to date.
2
-
7056
... More
(2.22) S&F M.S. Clamps set of 50x6mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.
4
-
450
... More
(2.19) Supply & Fixing of ISi marked three core PVC flat submersible cable asper IS 694: 1990 or amended up to date and conductor as per class 5 of IS8 130: 1980 includ ing making connection etc.
-
-
-
... More
(2.19.1) 3 core 4.0 mm2
500
-
137
... More
(2.2) Providing and Laying of ISI Marked PVC insulated and PVC sheathed cables of 1.1 KV grade with aluminum conductor of IS 1554 category II and approved make of including excavation of 30cmx75cm side trench as per IS 1255, 25cm thick under layer of sand II class brick covering, refilling earth in the remaining portion making necessary connection including testing etc. of required size 4 core (category 1) make as mentioned in specification.
-
-
-
... More
(2.20.2) 16 Sqmm, 4 core
200
-
191
... More
(2.24) Providing & Lowering in tubewell ISl marked GI Pipe "B" class as perIS: 1239 or amended up to date threaded and double flanged (welded) onboth ends and two number 25x3mm ms flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect.
-
-
-
... More
(2.24.2) 50 mm dia
240
-
489
... More
(2.11) Supply of ERW M.S. black casing pipe ISi marked (IS: 4270/2001) or
amended up to date of following sizes
-
-
-
... More
(2.11.2) 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m)
60
-
1841
... More
(2.12) Labour charges for making slots on blank pipes made of ER W MS black pipe ISi marked of following sizes, the slotting should be as per IS:8110-2000 or as amended up to date.
-
-
-
... More
(2.12.2) 200 mm dia nominal bore.
24
-
180
... More
(T-15) Providing & fixing of ISI Marked GI Bend 90 degrees of following sizes including all jointing material “B” class.
-
-
-
... More
(T-15.1) 50 mm dia
6
-
300
... More
(2.32) Supplying & Installing 100 mm diameter sealed diaphragm bourdon typepressure gauge of range 0 to I 0 kg. including all jointing material as per specification with safety cover.
2
-
800
... More
(2.18) Supply and Fixing of electric control feeder panel comprising of suitablerating MCCB , fully automatic star-delta starter, over load relay, amperemeter with CTs, volt meter, phase preventor, suitable starting capacitorsphase indicators, lighting arrangement etc complete suitable for threephase pump set. The panel should have space for energy meter (supplied
by DISCOM). All these equipments shall be housed by panel box madeout from 18 guage M.S. Sheet with powder coating. Panel should be ofminimum size 900 x 600 x 450 mm with Stand ( made of angle iron ofsize 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs,each leg's length 18" and double door including in built locking system.The legs should be embedded in M-15 cement concrete plat form.The size
of CC plateform should be equal or bigger than the base size of panelhaving height of at least 200 mm from ground level. The panel shouldhave opening of suitable size in front of space for energy meter with glassfor meter reading. The operation of panel should be suitable for on 440Volt AC Supply.
-
-
-
... More
(2.18.1) Above 5 HP and up to 10 HP
4
-
18290
... More
(2.3) Providing & Fixing of double flanged, Cl body, ISi marked NR V ofapproved make of following sizes
-
-
-
... More
(2.30.1) 65 mm dia
2
-
2160
... More
(2.23) Supply & Fixing tube well cover of MS sheet 8mm thick at top & Smmthick I OOmm wide shroud around the edge so as to form a cap on the topend of casing pipe with GI Nipple 45cm long & two GI flanges at bothend in 80mm sizes passing through a hole in the centre of MS sheet. A25mm socket with end plug shall also be welded over top plate (as perdrawillg enclosed). A GI nipple having outside thread of size 1/2" (for
installation pressure gauge) shall tie provided & welded with 80mm GInipple near top plate nipple shall be provided with end plug.
-
-
-
... More
(2.23.3) 200 mm dia
2
-
750
... More
(6.1.1.1) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Manually Operated CI Sluice valve of Class PN-1.0 80 mm HW
2
-
4695
... More
Construction of Reservoirs (Rates are based on PHED SOR 2020)
-
-
-
... More
(1) Construction of RCC INTZE type over Head Service Reservoir fo Following Capacity and Staging consisting of excavation in all types of strata, RCC Work, cement plaster with water proofing compound to inner face of the container including refilling disposing off the surplus stuff, plinth protection, all labour and material charges including provinding and fixing of accessories such as ladder,manhole frame and covers, water level indicatore (float type), ventilator with SS scren, lightening arrestor, float valves, provinding and applying three coats of cement paint to the external surface and giving satisfactory hydraulic test and water tightnees test as per I.S. code, etc. complete in all respect as per desing data, critera, obligatory requirements and detailed specifications, scope of work and GA drawing. The job includes painting the name of the schemes and other details on the reservoir, provindg alluminium portable ladder suitable to reach at height of 4.5 Mtr and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and scope of work. 100 KL
-
-
-
... More
The rate indicated below are excluding th cost of pipes, specials and valve required for inlet, washout, overflow and bypass arrangement
-
-
-
... More
(3.2.2.2) Rate for RCC OHSR, SBC 10T/Sqm, seismic zone II and Staging 18 Mtr.250 KL /18 MT CAPACITY
100000
-
20.84
... More
(3.2.1.2) For foundation on SBC 7 MT/sqm applicable for SBC more than or equal to 7 MT/sqm and less than 10 MT/sqm, add 5%
100000
-
1.04
... More
(3.4) Providing and fixing double flanged ISI marked DI class K-9 pipes as per IS:8329-2000 (amended upto date) as vertical pipes for RCC reservoirs including specials required such as duck foot bend,bend, tee etc. providing clamps at every 3 mtr, jointing material such as nuts,bolts,rubber packing hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, technical specification and scope of work.
-
-
-
... More
(3.4.1) 100 mm
20
-
1782
... More
(3.4.2) 150 mm
60
-
2583
... More
(P-11) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.Manually Operated CI Sluice valve of Class PN-1.0
-
-
-
... More
(P 11.4) 100 mm HW
2
-
6468
... More
(P 11.6) 150 mm HW
2
-
10205
... More
RISING MAIN PIPELINE (Rates are based on PHED SOR 2020)
-
-
-
... More
(SOR PIPE LINE 2020) Providing, lowering, laying in trenches, aligning, fixing in positionand jointing Ductile Iron (DI) ISi marked K-7 grade S&S pipesas per 15:8329-2000 (amended upto date), with internal cement
mortar lining suitable for potable water with rubber ring (EPDM)joints as per IS: 5382- 1985 including all taxes (Central and local),transportation and freight charges, inspection charges, loading/unloading charges, including cost of labour and material, specials(Tee, bend etc.) satisfactory hydraulic testing, disinfection etc.complete as per technical specifications and direction of Engineer- incharge. (excluding earth work)Note : Providing and fixing of all requisite specials as per drawing,design and layout are inclusive in RM measurement of the item andshall not be paid separately.
-
-
-
... More
(1.1.1) 80 mm
400
-
1084
... More
(1.4) Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) .
Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
Supply may be in coil or straight length in 6 M/12 M.
-
-
-
... More
(1.4.3) HDPE PE-80 PN-10
-
-
-
... More
(1.4.3.1) 90 mm dia
1650
-
333
... More
(1.4.3.2) 125 mm dia
13500
-
689
... More
(4.1) Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr.
-
-
-
... More
In soft Rock
-
-
-
... More
(4.1.2.2) For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110
& up to 140 mm.
1640
-
253
... More
In Hard Rock ( Blasting prohibited)
-
-
-
... More
(4.1.3.1) For dia of pipe above 150 mm and up to 350 mm nominal.
410
-
757
... More
(11.1) SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU)
, Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge.
Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
(40546) EFM100 mm
1
-
87889
... More
(SOR PIPE LINE 2020) Providing, lowering, laying, aligning, fixing in position and jointing at all level/depth S&S standard special with rubber ring(EPDM) joints as per SI:5282-1985 such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in- charges :
-
-
-
... More
(1.3.1) A/S Tee, Bend, Reducer(All End Socketed)
-
-
-
... More
(1.3.1.1) Upto 300 mm Diameter
250
-
121
... More
(6.5) Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI single Air Valve Flanged/ Screwed type of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended upto date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 ,Float Guide- HBT1,Body seat ring - Leaded tin bronze/ SS
, Seal ring and face ring - EPDM/NBR, Ends flanged according to IS:6418 or screwed type shall have external pipe threads conforming to IS:554, Fasteners - CS. All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work.Class PN 1.0
-
-
-
... More
(6.5.1.2) 25 mm S-1 Type
2
-
2352
... More
(P-11) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.Manually Operated CI Sluice valve of Class PN-1.0
-
-
-
... More
(P 11.4) 100 mm HW
4
-
6468
... More
(P 11.6) 150 mm HW
4
-
10205
... More
(4.4) Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.
12.5
-
3452
... More
(4.5.1) Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.M20 grade Nominal Mix
1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
12.5
-
5138
... More
(4.2) Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
25
-
802
... More
DISTRIBUTION PIPELINE (Rates are based on PHED SOR 2020)
-
-
-
... More
(SOR PIPE LINE 2020) Providing, lowering, laying in trenches, aligning, fixing in positionand jointing Ductile Iron (DI) ISi marked K-7 grade S&S pipesas per 15:8329-2000 (amended upto date), with internal cement
mortar lining suitable for potable water with rubber ring (EPDM)joints as per IS: 5382- 1985 including all taxes (Central and local),transportation and freight charges, inspection charges, loading/unloading charges, including cost of labour and material, specials(Tee, bend etc.) satisfactory hydraulic testing, disinfection etc.complete as per technical specifications and direction of Engineer- incharge. (excluding earth work)Note : Providing and fixing of all requisite specials as per drawing,design and layout are inclusive in RM measurement of the item andshall not be paid separately.
-
-
-
... More
(1.1.1) 100MM DIA
410
-
1145
... More
(1.1.2) 150MM DIA
1110
-
1644
... More
(1.4) HDPE PIPES
Providing, lowering, laying and jointing in trenches. standard lengths HDPE ISi marked Pipes as per IS-4984: l 995 (amendedupto date) with necessary jointing material like mechanicalconnectors, i.e. thread/ insert joint/ quick release coupler joint/compression fitting joint or flanged joint and specials jointing pipeby butt fusion/ electro fusion welding method, including all taxes ,transportation and freight charges, inspection charges, loading/unloading charges, stacking of pipes, including cost of labour andmaterial, specials (Tee, bend etc.), satisfactory hydraulic testing,disinfection etc. complete as per technical specifications and di rection of Engineer-in-charge of following class and diameter.(excluding earth work)Note : Providing and fixing of all requisite specials as per drawing,design and layout are inclusive in RM measurement of the item andshall not be paid. separately.Supply upto 110 mm dia. in coil & above 110 mm dia straight lengthin6M.
-
-
-
... More
(1.4.1.1) HDPE PE-80 PN-6 75mm dia. (With ED)
3880
-
162
... More
(1.4.1.2) HDPE PE-80 PN-6 90 mm dia. (With ED)
2430
-
236
... More
(1.4.1.3) HDPE PE-80 PN-6 110 mm dia. (With ED)
930
-
360
... More
(4.1) Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr.
-
-
-
... More
(4.1.1) In all type of soil
-
-
-
... More
(4.1.1.1) For HDPE pipe line dia up to 110 mm
5068
-
82
... More
(4.1.1.2) For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110
& up to 140 mm.
1064
-
128
... More
(4.1.2) In soft Rock
-
-
-
... More
(4.1.2.1) For HDPE pipe line dia up to 110 mm
2172
-
177
... More
(4.1.2.2) For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110
& up to 140 mm.
228
-
253
... More
(4.1.3) In Hard Rock ( Blasting prohibited)
-
-
-
... More
(4.1.3.1) For dia of pipe above 150 mm and up to 350 mm nominal.
228
-
757
... More
(11.3) SITC of Bulk Flow Meter with removable mechanism class "B" confirming to ISO:4064:2005/ IS: 2373 of approved make of following dia sized pipelines and specifications complete: Media : Water (Clear ), Temp. 50 deg., Pr. rating: PN16, Protection type: IP- 68, Body Material : IS-210 Gr. FG-200, Accuracy Class :Class B (±2 % @ Nominal flow rate), Magnetic Drive, Dry Dial, Epoxy powder coated, Pulse out put option, Anti-magnetic protection including all materials and making connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge.
Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
(40604) BFM 100 mm
1
-
16372
... More
(40606) BFM 150 mm
1
-
24160
... More
(SOR PIPE LINE 2020) Providing, lowering, laying, aligning, fixing in position and jointing at all level/depth S&S standard special with rubber ring(EPDM) joints as per SI:5282-1985 such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in- charges :
-
-
-
... More
(1.3.1) A/S Tee, Bend, Reducer(All End Socketed)
-
-
-
... More
(1.3.1.1) Upto 300 mm Diameter
325
-
121
... More
(6.1) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
Manually Operated CI Sluice valve of Class PN-1.0
-
-
-
... More
(6.1.1.1) 80 mm HW
6
-
4695
... More
(6.1.1.2) 100 mm HW
4
-
6468
... More
(6.1.1.4) 150 mm HW
2
-
10205
... More
(4.4) Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.
190
-
3452
... More
(4.5.1) Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.M20 grade Nominal Mix
1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
190
-
5138
... More
(4.2) Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
380
-
802
... More
(4.5) Removing & Re-fixing of Precast concrete interlocking blocks by manual, stacking of severciable & un serviceable material separately. disposal of dismantled material lead up to 50 mtr. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joints to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the directions of Engineer in charge. The rates to be inclusive of fixing of minimum 70 percent reusable precast concrete interlocking block and cost of required new precast concrete interlocking block, all lead and lift as per general specifications. (Interlocking block manufactured by fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS:6717-2001. Tensile splitting strength and breaking load as per BS: 6717-2001 Colour: Grey cement natural colour. Variation in Dimension : Less than 1.6 mm Variation in thickness: Less than 3.2 mm)
-
-
-
... More
(4.5.2) b) 80 mm thick.
490
-
268
... More
Civil Work (Rates are based on PHED SOR 2020)
-
-
-
... More
(8.2) Construction of boundary wall of Brick/ stone masonary as per enclosed GA drawing, scope of work and technical specifications complete work in all respect.
140
-
4719
... More
(8.3) Providing and fixing steel, gate, grating and grills made of angles, tees, square bars, flats or black pipe with hold fast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide and two coat of enamal paints.
290
-
87
... More
Procurment and installation of pump set (Rates are based on PHED SOR 2020)
-
-
-
... More
(PHED SOR 2020/5.1) Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 operating at sync. speed 2900 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz
A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions of one of the makes approved by Technical Committee.
-
-
-
... More
Centrifugal Monoblock Pump set (Double Stage)
-
-
-
... More
(5.1.2.2) 7.50 HP
2
-
47086
... More
(7.2) SITC STAR DELTA Starter type LT Panel of following rating: all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Baklight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel
, Lock, Hing , Bidding , Connectors, Netural Links , Sprial , Saddle & Packing Material ) etc. and 100A/ 125A ,TPN, Aluminum Bus Bar with Colour coated heat shrinkage sleeves complete as per Technical Specifications and as per direction of Engineer-In-Charge.
-
-
-
... More
(7.1.3) STAR DELTA STARTER 7.50HP - (1W+ 1S): I/C - MCB 63A ,FP, 10
KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red- 1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCB 40A ,TP, 10 KA, C Curve (2), Power Cont 25A TP AC3
Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (9-13A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red
- 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2)
1
-
47125
... More
Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6
-
-
-
... More
(6.17.2) 100 mm dia.
4
-
2688
... More
(6.17.4) 150 mm dia.
2
-
4219
... More
(2.15) Supply & Installation of 3 phase ISi marked submersible motor pumpset of five star rating by BEE and as per JS: 8034-2011 (pump) and IS9283-2013 (motor) or amended up to date of approved make of followingduty condition with required accessories including making connectionsuitable for tube well/DCB. The job includes lowering of motor pump,
installation of complete fitting & accessories, jointing of electrical cablesup to switch board, testing of submersible pump set and interconnectionup to water mains, complete in all respect.
-
-
-
... More
(2.15.1) Up to 5.5 KW (7.5 HP) & head up to 120 mtr.
16.78
-
6920
... More
(2.18) Supply and Fixing of electric control feeder panel comprising of suitablerating MCCB , fully automatic star-delta starter, over load relay, amperemeter with CTs, volt meter, phase preventor, suitable starting capacitorsphase indicators, lighting arrangement etc complete suitable for threephase pump set. The panel should have space for energy meter (supplied
by DISCOM). All these equipments shall be housed by panel box madeout from 18 guage M.S. Sheet with powder coating. Panel should be ofminimum size 900 x 600 x 450 mm with Stand ( made of angle iron ofsize 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs,each leg's length 18" and double door including in built locking system.The legs should be embedded in M-15 cement concrete plat form.The size
of CC plateform should be equal or bigger than the base size of panelhaving height of at least 200 mm from ground level. The panel shouldhave opening of suitable size in front of space for energy meter with glassfor meter reading. The operation of panel should be suitable for on 440Volt AC Supply.
-
-
-
... More
(2.18.1) Above 5 HP and up to 10 HP
-
-
-
... More
(1.21) providing,lowering,laying,aligning,fixing,in positionlevel/depthCI class B special as per IS :1538amendment up to date in trences complete including all material,labour,testing and commissioning along with pipeline appuratences as per Technical specification and as per direction of Engineer. Note: E/W to be measured and paid separately.
-
-
-
... More
(1.21.2) Double Flanged CI pipe fittings.
-
-
-
... More
(1.21.2.1) Up to 300 mm dia
500
-
92
... More
(2.2) Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.
-
-
-
... More
(2.20.1) 10.0 Sq.mm, 4 core
-
-
-
... More
(2.20.2) 16.0 Sq.mm, 4 core
80
-
191
... More
(2.19) Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc.
-
-
-
... More
(2.19.1) 3 core 4.0 Sq.mm
50
-
137
... More
(2.19.2) 3 core 6.0 Sq.mm
-
-
-
... More
(2.21) Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
2
-
2800
... More
(2.32) Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg. including all jointing material as per
specification with safety cover.
2
-
800
... More
(6.1) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
(6.1.1) Manually Operated CI Sluice valve of Class PN-1.0
-
-
-
... More
(6.1.1.2) 100 mm HW
4
-
6468
... More
(P 11.6) 150 mm HW
2
-
10205
... More
(6.4) Providing, lowering, aligning, fixing in position in pipe line, CI double flanged Dual plate check valve of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Cover of Grey cast iron of IS:210/ FG200 , Disc / plates - Cast steel ,Disc seal ring of EPDM/ NBR (food grade quality), Body seat of SS ,Face to face dimensions as per API: 594, Flanges Drilled as per IS:1538. All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan conforming toType B of IS:341or paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Shaft/Stop Pin of SS- AISI- 304/410 , Hinge SS AISI 316/304 / CS ,Spring SS AISI 316/304 , Bonnet Gasket EPDM, Bush- Brass with EPDM/NBR "O "ring seal.Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) ,Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
(6.4.1) Class PN 1.0
-
-
-
... More
(6.4.1.2) 100 mm dia
2
-
5790
... More
Pump House Reparing (Rates are BASED ON PWD BSR 2019 SIROHI CIRCLE)
-
-
-
... More
(B-14.54) Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead
225
-
8.64
... More
(B-14.57) Desmantling of roofing with car including stacking of servceable material and diposal of unserviceable material with in 50 Mtr. Lead for
24
-
41
... More
(B-14.56.3) Desmantling of floring with car including stacking of servceable material and diposal of unserviceable material with in 50 Mtr. Lead for
24
-
56
... More
(B-14.12.1) Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead :
3
-
110
... More
(B-12.8.2) Plaster on new surface on walls in cement sand mortar 1:4 including racking of joint etc. complete fine finished: 20 mm thick.
325
-
180
... More
(B-15.19.2) Grading for roof waterproofing treatment with cement concrete 1:2:4 graded stone aggregate 20mm nominal size with water proofing compound as per manufacture specification cement mortar 1:4
2.5
-
4327
... More
(B-10.21) Finishing with 25 mm thick cement plaster on roofs in cement sand mortar 1:4 mix including water proofing compound @ 2 % of cement used, with neat cement, finishing, curing etc. complete in all respect including making of 300 mm x 300 mm square.
35
-
199
... More
(B-11.35.2) Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :For area of each slab up to 901 to 2000 Sq. Cm :(A) 25 mm thick slab.
24
-
857
... More
(B-10.8) Providing batta (gola) 75mm*75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design.
50
-
30
... More
(B-9.13) Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
25
-
90.3
... More
(B-9.26.2) Providing and fixing Ms Sheet double Leaf doors shutter in angle iron frame 35x35x5mm suitabilly digonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per dtrection of engineer incharge but excluding cost of chowkhatsincluding two coates of anti-corrasive red oxide primer pant M.S. sheet20 S.W.G.
4.5
-
1673.7
... More
(B-12.53.1) Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Three or more coats).
185
-
76.8
... More
(B-12.68.1) Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade : (One or more coats on old work)
25
-
45.48
... More
House Hold Connection in scheme (Rates are based on PHED SOR 2020)
-
-
-
... More
(1.19) Providing service connection as per technical specification and standard drawing as per relevant IS code (amended up to date) from all kind of water mains up to consumer meter/premises (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil including demolishing of cement concrete,WBM, Black top etc. of all thickness; cutting of CC road/jhiri by using a concrete cutter machine; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter ; providing & fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS/PVC clamp with saddle piece, gunmetal ferrule 4.0 mm (ISI make) , valve (IS: 778) and specials with MDPE pipe PE 80 PN 12.5 as per ISO 4427 below ground level and GI 15 mm class B (ISI mark) above ground level ( max. length 3.0 mtr), P&F a Bib Cock (IS : 8931 Mark), Superior quality Brass 400 gm,15 mm nominal bore including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . In addition to the ferrule, an orifice of 4.0 mm dia should also be provided in the service line at the entry point of the consumer's property in such a way that it should be accessible for inspection to VWSC, PHED and any other authority which would like to inspect as and when required. The service line should be laid at least 45 cm below ground level, except in case of concrete/bituminous roads where minimum depth shall be 20 cm.
For detailed specifications of MDPE pipes please refer section
"Technical Specifications" of bid document. General specifications of MDPE pipes shall be as under:
• The raw material shall be virgin PE 80 Blue compound and comply with the requirements of ISO/Directive of testing material : 9080 with minimum required strength of 8 Kg/sq.cm.
• The raw material shall be Food grade quality Pressure rating shall be 12.5 Bar.
• The pipes shall bear ISO marking.
-
-
-
... More
(1.19.1) Average length up to 05 mtr 20 mm dia MDPE pipe/ 15 mm GI class B pipe
550
-
2249
... More
(9.3) Data entry of existing FHTCs in rural area under JJM on website ejalshakti.gov.in; work includes visiting the village for collecting basic data consumers like i.e. Aadhar no./ration card/voter ID/BPL card/ PAN card/driving licence/passport/Antyodaya card/mobile no. etc. and entering the details on the above website. The cost also includes computer and operator.
550
-
30
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements